54 Ergebnisse (0,23329 Sekunden)

Alle Filter anzeigen

Marke

Händler

Preis (EUR)

Filter zurücksetzen

Produkte
Von
Shops

Light Solutions Inline LED Built-in Dimmer - Push dim - Memory - Lampen - 5714255007893

Light Solutions Inline LED Built-in Dimmer - Push dim - Memory - Lampen - 5714255007893

This dimmer can turn any normal switch into a dimmer using push dimmer, install a spring in the switch and you will be able to use this dimmer. The small dimmer can also be mounted in the back boxes/ceiling boxes of your lamp sockets. The dimmer does not require you to have zero wire with you, and therefore you can safely use it behind all switches. The dimmer remembers where it stopped if the power is interrupted. In addition to the standard, it also has a multitude of settings that can be adjusted as follows: Min, Max, Bulb memory, speed, power memory, lamp memory

EUR 25.90
1

Light Solutions Aluminum Profile - Model C for Philips Hue and LIFX - White - 1m - Smart Home - 5714255008081

Light Solutions Aluminum Profile - Model C for Philips Hue and LIFX - White - 1m - Smart Home - 5714255008081

This aluminum list is the ultimate solution to hide your Philips Hue Light Strip in a stylish and elegant way. With the perfect width and height, it fits perfectly with your strap, and you can easily put it together at the ends to achieve the desired length. With the possibility of angling the light 30 or 60 degrees, you can avoid unpleasant glare and create the perfect atmosphere in any room. The aluminum list is available in three different colors - aluminum, white or black - so you can choose the one that best suits your interior. There is also a Milky click cover that hides the Philips Hue Light Strippen inside the aluminum list and gives a more refined look. You also get 2 mounting brackets (screws not included) and 2 end pieces with each list so you can mount it easily and safely. And if you need to adjust the length, you can easily cut the aluminum list with a flattering. This aluminum list is not only perfect for Philips Hue Light Strip, but also fits perfectly with LIFX Z, Hilux and Wiz LED bands. So no matter what straps you use, you can be sure that this aluminum list will give you the perfect solution to hide it in a stylish and elegant way.

EUR 22.36
1

Light Solutions Minimalist bracket for Hue Dimmer Switch V1 & V2 - Smart Home - 5714255009552

Light Solutions Minimalist bracket for Hue Dimmer Switch V1 & V2 - Smart Home - 5714255009552

Minimalist design that complements any device Easy and flexible installation with screws or 3M tape tailored to perfect fit for Philips Hue Dimmer Switch V2 Elegant integration upgrade your home decor and make your Philips Hue Dimmer Switch V2 an integral part of your home with our 3D- Printed brackets. Designed with a deep understanding of both aesthetics and functionality, this bracket ensures that your Dimmerswitch is not just a practical addition, but one that improves your space's appearance. With its minimalist design, your switch becomes a simple extension of your wall decor, creating a seamless and stylish experience in any room. Seamless installation forget about cumbersome installation processes! Our 3D printed bracket for Philips Hue Dimmer Switch V2 is designed for maximum ease of use. With two sturdy screw holders we offer you a stable and secure mounting. If you prefer a non-permanent solution, the included 3M tape is perfect for a quick and easy installation. The choice is yours and with our bracket, the process is so simple that you can change the location of your switch as you see fit, without compromising style or functionality. Customized perfection when it comes to your home is only the best good enough. Our 3D printed bracket is created with precision to ensure a flawless fit for your Philips Hue Dimmer Switch V2. This accessory is not just a functional necessity: it is an improvement that lifts your decor to new heights. By choosing our bracket, you choose a solution that respects both your home and your need for an advanced lighting control.

EUR 8.51
1

Light Solutions Govee - Indoor Light Strip fittings - 10 pcs - Smart Home - 5714255009446

Light Solutions Govee - Indoor Light Strip fittings - 10 pcs - Smart Home - 5714255009446

Revolutionize Your LightingWith Govee Lightstrip Clips, you can easily transform the atmosphere of any room in your home. Forget the cumbersome installation and unreliable tapes; these clips offer a durable and stable solution that ensures your lightstrips are always in place. Create a dreamy lightscape with effortless elegance.Create Your Personal Light UniverseHave you ever wanted to personalize your home with lighting that reflects your unique style? Govee Lightstrip Clips give you the opportunity to unleash your creativity. Create enchanting patterns and designs in any room - from a star-studded bedroom to a warm and welcoming kitchen.Lightning fast installationSay goodbye to time-consuming setups. With Govee Lightstrip Clips, adding stylish lighting to your home is as simple as a click. Their modular design makes it easy to adapt and expand your lighting, giving you complete freedom to experiment and change your space as you wish.

EUR 11.26
1

Light Solutions SPARE PART: Plug for power supply - suitable for Hue Lightstrip & Hue bridge - Smart Home - 5714255008166

Light Solutions SPARE PART: Plug for power supply - suitable for Hue Lightstrip & Hue bridge - Smart Home - 5714255008166

Durability and Compatibility If you have lost or damaged the plug for your Philips Hue Lightstrip or Philips Hue Bridge, you do not need to buy the whole set again. With our handy replacement power supply, you can keep your existing unit and continue to enjoy the beautiful light achieved with the Philips Hue system. Our replacement part is designed specifically to fit your Hue Lightstrip and Hue Bridge. You can be sure that it will fit perfectly and work seamlessly with your existing devices. Avoid the hassle of finding a replacement elsewhere and avoid spending extra money on buying a whole new system. We believe in creating products that are not only functional and convenient, but also sustainable for our planet. By offering this spare part, we allow you to reduce waste. By replacing just the plug and reusing your existing power supply, you reduce waste and avoid throwing away the entire device. This is not only financially beneficial for you, but it also shows your commitment to creating a more sustainable future. Easy installation and reliable performance Our power supply replacement part is easy to install and requires no technical skills. Simply connect the new plug to your existing power supply and you are ready to continue using your Philips Hue devices. We have thoroughly tested our replacement part to ensure reliable performance and durability. You can be sure that it will run smoothly and provide the power needed to maintain the optimal operation of your devices.

EUR 13.14
1

Light Solutions Smart smoke alarm - Smartlife - Smart Home - 5714255004168

Light Solutions Smart smoke alarm - Smartlife - Smart Home - 5714255004168

This smartlife smoke alarm is perfect for those of you who want a smart smoke alarm, but don't want to pay for the big brands. The smoke alarm that works on the smartlife app has a photoelectric sensor, which means it detects smoke through light, which means it is better at handling small fires that are smoldering. Everything can be easily controlled from the Smartlife app, and you will be notified immediately as soon as the smoke alarm goes off via the app. You can also decide via the app whether all alarms should be linked together, or sound separately This is what you get with the smartlife fire alarm: Beautiful and neutral design Mounting with screws or double-adhesive tape Loud 85Db siren Option to link several smoke alarms together Holds up to 3 years on a set of AA batteries The long life of a set of AA batteries ensures optimal safety. When the batteries are about to run out of power and need to be changed, you are automatically notified via the app. The entire front is a large button that you can use to test the smoke alarm, but which also functions as a pause button if it has been activated by a mistake.

EUR 34.58
1

Light Solutions Wall bracket for Netatmo rain gauge & wind gauge - Smart Home - 5714255009545

Light Solutions Wall bracket for Netatmo rain gauge & wind gauge - Smart Home - 5714255009545

Optimize your outdoor Netatmo Rain Gauge with our custom-made wall bracket, carefully produced through 3D printing. This intelligent accessory allows you to mount your Netatmo Rain Meter on the wall, ensuring accurate and reliable recording of rainfall over time.Our wall mounts are designed to withstand harsh weather conditions and outdoor influences, and are made from weather-resistant and durable material that ensures years of use. You can trust that your Netatmo Rain Gauge remains protected and functions optimally, regardless of the weather conditions.Installation is simple, but please note that screws for attachment are not included. You can use suitable screws depending on the material and requirements of your wall. This 3D printed solution is tailored to perfectly fit your Netatmo Rain Meter and allows you to place the device securely on the wall in the desired position.Make your Netatmo Rain Gauge even more reliable and functional with our 3D printed outdoor wall bracket. With this accessory, you can easily integrate your rain gauge into your outdoor installation and achieve precise measurement of rainfall. Be ready to monitor the weather with ease using this smart and durable mount.

EUR 14.18
1

Light Solutions Wall/ceiling bracket for TP-Link Deco M9+ - Smart Home - 5714255009538

Light Solutions Wall/ceiling bracket for TP-Link Deco M9+ - Smart Home - 5714255009538

Transform your home network with our 3D printed wall bracket for TP-Link Deco M9+, designed to combine style and functionality. Enjoy an easy and safe assembly that ensures optimal performance and an aesthetic presentation of your TP-Link equipment. Integrate your TP-Link Deco M9+ seamlessly into any room and release floor space with a bracket that is both practical and stylish. Revolutions Your home network Discover how our specially designed wall brackets for TP-Link Deco M9+ can transform your home network. With this elegant solution, you release valuable floor space and organize your wireless network in style. Our wall bracket, created through advanced 3D printing technology, is not only practical, but also a style icon that fits perfectly into any modern home or office. Simple installation, secure mounting forget about complicated installation processes! With our user-friendly design and the supplied screws you can easily and safely mount your TP-Link Deco M9+ on the wall. Our guidance ensures that you get the correct fit and performance, with the deco logo elegantly placed downwards. Security and style go hand in hand with our wall bracket. Integrated design and functionality Our wall bracket is more than just an accessory: It is an integrated solution that improves your wireless network aesthetics and efficiency. Whether in the living room, in the office or somewhere else in your home, our 3D-printed bracket allows you to place your TP-Link Deco M9+ Exactly where you need it most, without compromising Designed.

EUR 17.00
1

Light Solutions Govee - Remote Wall Mount - Smart Home - 5714255009453

Light Solutions Govee - Remote Wall Mount - Smart Home - 5714255009453

Optimize your Govee remote control with our 3D printed Govee Remote Holder. This smart accessory allows you to store your remote control in a practical way so that it is always close at hand when you need it.Carefully manufactured through 3D printing, our Govee Remote Holder is designed to keep your remote safe and secure. This holder is ideal for preventing your remote control from being lost or damaged, and it also allows you to organize your space and keep it tidy.It is important to note that screws are not included with this product, so make sure you have the necessary tools for assembly. The included sticker makes it easy to attach the remote to the wall, but this method can tie the LED strip to the wall, limiting your flexibility. With our holder, you can easily remove the remote control from the wall if you need to move the piece of furniture to which the LED strip is attached.Make your Govee remote control even more practical and functional with our 3D printed Govee Remote Holder. Organize your space, avoid losing your remote, and get the convenience you deserve.

EUR 7.46
1

Light Solutions Wall bracket for Google Nest Audio - Smart Home - 5714255009507

Light Solutions Wall bracket for Google Nest Audio - Smart Home - 5714255009507

Optimize your Google Nest Audio experience with our Google Nest Audio Wall Mount, a smart solution manufactured through 3D printing. This kit consists of two 3D printed parts that make up an egg bracket for your Google Nest Audio device. Our wall mount is designed to allow you to mount your speaker on the wall, opening up a range of uses and giving you the freedom to place it where it suits you best.This minimalist bracket is easy to install and can easily be rotated to change the orientation of your Google Nest Audio device. It provides a stylish and discreet attachment for your speaker that fits into any interior style. Note that screws for attachment are not included, so be sure to have appropriate mounting hardware on hand.With our Google Nest Audio Wall Mount, you can free up desk space and create a more streamlined and organized listening experience. Whether in the living room, bedroom or office, this bracket allows you to customize the position of your Google Nest Audio and get the best sound experience.Make your Google Nest Audio even more versatile with our 3D printed Wall Mount and experience the benefits of a wall-mounted listening experience. Add a stylish and practical dimension to your smart home with this elegant bracket.

EUR 15.78
1

Light Solutions Wall/ceiling mount for Google Nest WiFi - Smart Home - 5714255009491

Light Solutions Wall/ceiling mount for Google Nest WiFi - Smart Home - 5714255009491

Optimize your Google Nest WiFi Point with our 3D printed wall bracket that allows you to mount the device in a minimalistic and stylish way. Designed with both functionality and aesthetics in mind, this bracket allows you to place your Google Nest WiFi Point on both the ceiling and the wall, depending on your needs and decor.Each bracket consists of four parts, including a main frame and three cover buttons for screw holes. The integrated cable hider makes it easy to organize and hide the cable, ensuring a clean and neat installation. Note that screws are not included, so make sure you have the necessary fasteners on hand.The bracket is designed to ensure that your Google Nest WiFi Point sits securely and stably on both the wall and the ceiling. It is an ideal solution if you want to optimize the location of your device to achieve better wireless coverage in your home or office.Make your Google Nest WiFi Point even more versatile with our 3D printed wall mount and achieve a hassle-free and stylish way to place your device. With easy installation and an aesthetically pleasing design, you can upgrade your wireless networking experience and create a clean and tidy installation.

EUR 14.21
1

Light Solutions Govee - Outdoor Light Mounts - 10 pcs - Smart Home - 5714255009439

Light Solutions Govee - Outdoor Light Mounts - 10 pcs - Smart Home - 5714255009439

Optimize your Govee Neon Rope Light installation with our 3D printed Govee Outdoor Light Mounts. This kit contains 10 mounts that are tailored to hold your strip securely in place and enable creative patterns and lighting arrangements in your outdoor area.These mounts are specifically designed for use with the H705 Govee Permanent Outdoor Lights and are an ideal replacement for the supplied tape. By attaching your light strips with these mounts, you ensure a more reliable and secure installation, preventing them from falling down over time.Please note that screws are not included in this kit, so make sure you have suitable screws available for fixing.Whether you want to create exciting patterns or simply want an extra secure installation for your outdoor lights, our Govee Outdoor Light Mounts give you the necessary flexibility and stability. Make your outdoor lighting even more impressive and durable with this practical accessory set.

EUR 9.00
1

Light Solutions SmartClip for 10mm COB LED Strip with 15cm cable - 5-pack - Smart Home - 5714255010220

Light Solutions SmartClip for 10mm COB LED Strip with 15cm cable - 5-pack - Smart Home - 5714255010220

Easy Installation These SmartClips from HiluX offer a quick and efficient solution for reconnecting cut COB LED strips. With a length of 15cm, these cord clips give you flexibility and freedom to customize your lighting exactly as you want it. Perfect for both amateurs and professionals, as the installation does not require the use of special tools - just click the cord into place and you're ready! Durable and Reliable Design Made of durable material, these SmartClips are designed to withstand both indoor and outdoor use. With a pack containing five clips, you get value for money and the security of knowing your LED strips have a sturdy connection that will last. This solution is not only practical, but also made to last! Flexible Lighting Solution With SmartClips you can easily add, rearrange and customize your lighting without worrying about permanent installations. Whether you want to highlight certain areas of the home, set the mood for a party or illuminate a workstation, these clips give you the ability to do it easily and safely. Insert the cut piece: Start by placing the cut end of your LED strip into the opening on the SmartClip. Make sure it is tight and evenly aligned with the clamp opening. Fasten with pliers: Use pliers to gently press the conductors down into the SmartClip. This ensures that the LED strip and the wires get a solid and durable connection. Press evenly and gently to avoid damage to the LED strip. Connect power: When the LED strip and wires are securely connected via the SmartClip, you can connect the power. Check that all connections are secure and that the LED strip lights up properly before proceeding with further installation or use.

EUR 9.05
1

Light Solutions Wall bracket for LEDVANCE Smart+ Corner Lamp - Black - Smart Home - 5714255010459

Light Solutions Wall bracket for LEDVANCE Smart+ Corner Lamp - Black - Smart Home - 5714255010459

This wall mount is designed for use with LEDVANCE SMART+ Wifi Floor Round Black RGB + TW + RC lamps. With this bracket, you can mount the lamp on the wall, which creates a unique and eye-catching light effect that is reflected onto the wall. Product advantages: Space-saving: By mounting the lamp on the wall, you free up floor space and create a stylish look. Elegant design: The bracket has an elegant and almost invisible design that fits into any decor. Easy installation: The bracket is easily installed with two screws (not included), making installation quick and easy. Screws not included, lamp not included Compatible with item numbers at LEDVANCE: Black: 4058075765191 White: 4058075765214 Advantages of the wall bracket: Stylish effect: Hang the lamp on the wall to achieve a cool light effect that creates atmosphere and highlights the room. The bracket keeps the lamp safe and discreet, as can be seen in the pictures, where the lamp is mounted on a wall and casts a soft, indirect light that creates a cozy atmosphere. The light spreads evenly on the wall, creating a glowing effect that can be customized in color and intensity to match any mood or occasion. Flexible placement: The bracket allows you to place the lamp flexibly and adjust the direction of the light. The pictures show how the bracket can be mounted both at the top and bottom of the wall for optimal light distribution. This enables creative lighting setups where the light can point both upwards and downwards depending on need. Available colours: The fitting is available in both white and black, so you can choose the color that best suits your decor.

EUR 2.90
1

Light Solutions Wall bracket for LEDVANCE Smart+ Corner Lamp - White - Smart Home - 5714255010466

Light Solutions Wall bracket for LEDVANCE Smart+ Corner Lamp - White - Smart Home - 5714255010466

This wall mount is designed for use with LEDVANCE SMART+ Wifi Floor Round Black RGB + TW + RC lamps. With this bracket, you can mount the lamp on the wall, which creates a unique and eye-catching light effect that is reflected onto the wall. Product advantages: Space-saving: By mounting the lamp on the wall, you free up floor space and create a stylish look. Elegant design: The bracket has an elegant and almost invisible design that fits into any decor. Easy installation: The bracket is easily installed with two screws (not included), making installation quick and easy. Screws not included, lamp not included Compatible with item numbers at LEDVANCE: Black: 4058075765191 White: 4058075765214 Advantages of the wall bracket: Stylish effect: Hang the lamp on the wall to achieve a cool light effect that creates atmosphere and highlights the room. The bracket keeps the lamp safe and discreet, as can be seen in the pictures, where the lamp is mounted on a wall and casts a soft, indirect light that creates a cozy atmosphere. The light spreads evenly on the wall, creating a glowing effect that can be customized in color and intensity to match any mood or occasion. Flexible placement: The bracket allows you to place the lamp flexibly and adjust the direction of the light. The pictures show how the bracket can be mounted both at the top and bottom of the wall for optimal light distribution. This enables creative lighting setups where the light can point both upwards and downwards depending on need. Available colours: The fitting is available in both white and black, so you can choose the color that best suits your decor.

EUR 3.08
1

Light Solutions Shelly - Wall Display Table Stand - 35 degrees - Black - Smart Home - 5714255009712

Light Solutions Shelly - Wall Display Table Stand - 35 degrees - Black - Smart Home - 5714255009712

Upgrade your Shelly Wall Display with our specially designed table stand that gives you the freedom to place your display on any surface without the need for wall mounting. This unique accessory, manufactured through precise 3D printing technology, is created to meet your needs for flexibility and stylish presentation.Important: Please note that the product is not approved for installation use as it is not part of the official mounting solution.With our Shelly Wall Display table stand, you can easily give your display an angle of 35 degrees, which is ideal for optimizing visibility and readability. This makes it a practical solution whether placed on a table, shelf or other flat surface.Installation is simple and does not require complex tools or cumbersome processes. You can easily place your Shelly Wall Display in the stand and it will stand stable and secure, ready to display your information in an elegant way.Create a dynamic presentation with our table stand, which opens up countless creative possibilities. Whether in the home, office or retail environment, this stand will help you add style and functionality to your Shelly Wall Display.Note that this product is designed to improve the user experience, but should not be used for installation purposes. Always ensure that your Shelly Wall Display is correctly installed according to current safety standards if it is used as part of an electrical installation.

EUR 32.00
1

Light Solutions Shelly - Wall Display Table Stands - 35 degrees - White - Smart Home - 5714255009378

Light Solutions Shelly - Wall Display Table Stands - 35 degrees - White - Smart Home - 5714255009378

Upgrade your display with our specially designed table stands for optimal flexibility and style. Enjoy the ideal point of view of 35 degrees for better readability wherever you place your display. Easy and secure installation without the use of complex tool, so your display is stable and secure. Unique flexibility on your finger tips Discover the freedom of placing your Shelly Wall Display, where you wish, with our innovatively designed table stand. Whether it is on your desk, in the bookshelf or in the middle of the coffee table, our stands ensure that your display is always in the perfect field of view. Our table stands are not only a practical solution, but also a stylish addition to any room. It is made with exactly 3D printing technology that guarantees a tailor-made fit and a seamless aesthetic that complements your display. Optimal visibility & readability with an ideal angle of 35 degrees ensures our table stands that your Shelly Wall Display is optimized for maximum visibility and readability. This angle is carefully selected to make sure you can easily read and interact with your display wherever you choose to place it. Our stands make your Shelly Wall Display even more functional and accessible in everyday life. Simple and secure installation Enjoy a worry -free setup with our user -friendly table stands. Installation requires no complex tools or long -term processes: Simply place your Shelly Wall display in the stand and it will be stable and secure. This gives you more time to enjoy the information and features your display offers, presented in an elegant and stylish way.

EUR 26.60
1

Light Solutions Aluminum Profile - Model S for Philips Hue and LIFX - Alu - 1m - Smart Home - 5714255008074

Light Solutions Aluminum Profile - Model S for Philips Hue and LIFX - Alu - 1m - Smart Home - 5714255008074

This aluminum list is the perfect solution to hide your Philips Hue Light Strip in an elegant and discreet way. With the correct width and height, this list is designed specifically to fit your light stripe and allows you to tailor the length to fit your space perfectly. The flat and compact design of the aluminum list makes it easy to hide and fits perfectly into any decor. You can choose from three different colors - aluminum, white or black - and a milky click cover is included which gives extra protection and hides the light strip even more. The aluminum list is also compatible with LIFX Z, Hilux and Wiz LED bands, allowing you to use it for several different light sources. In addition, you also get 2 mounting brackets (screws not included) and 2 end pieces in the price for each list, so you can mount it easily and safely. With this aluminum list, you can easily and quickly upgrade your lighting design and create a more stylish and elegant lighting in your home or office. And with the ability to customize the length, you can be sure that you will get the perfect solution for your specific needs.

EUR 19.44
1

Light Solutions Aluminum Profile - Model S for Philips Hue and Lifx - White - 1m - Smart Home - 5714255008050

Light Solutions Aluminum Profile - Model S for Philips Hue and Lifx - White - 1m - Smart Home - 5714255008050

This aluminum list is the ultimate solution to hide your Philips Hue Light Strip in an elegant and stylish way. With the perfect width and height, this list is easy to assemble and adjust to the desired length. The flat and discreet profile makes it easy to hide the LED strip, and with the possibility of choosing between aluminum, white or black, you can customize it to your decor. The included Milky Click Cover ensures that your Philips Hue Light Strip remains hidden and protected inside the aluminum list. In addition, you also get 2 mounting brackets (screws not included) and 2 end pieces in the price, so you can mount the list in a safe and stable way. The aluminum list is easy to cut with a flattering to fit your LED strip perfectly. And if you have other LED bands like LIFX Z, Hilux or Wiz, you can also use this list to hide them in an elegant way. So if you want an elegant and discreet way to hide your LED strip, this aluminum list is the perfect choice for you.

EUR 20.54
1

Light Solutions Shelly - Wall Display table stand - 45 degrees - Black - Smart Home - 5714255009743

Light Solutions Shelly - Wall Display table stand - 45 degrees - Black - Smart Home - 5714255009743

Introduce a practical and stylish solution to your Shelly Wall Displays with our 45-degree table stand. This specially designed accessory, carefully manufactured through 3D printing, allows you to place your wall displays on the table instead of mounting them to the wall. This opens up a world of possibilities for creating an interior that suits your style and needs.Please note that the use of this table stand is at your own risk, as the product is not officially approved as installation material. This must be carefully considered, especially if it involves electrical installations, where safety should always be a priority.Our 45-degree table stand is simple to use and makes it easy to place your Shelly Wall Displays on the table without any hassle. The stable construction ensures that your devices remain securely attached, allowing for a more flexible setup.Although the product is carefully designed and manufactured with great precision, it is important to be aware of the potential risks of using 3D printed parts in connection with electrical installations. Before integrating this table stand into your system, we recommend that you consult a qualified electrician to ensure that everything is safe and meets standards.Make your Shelly Wall Displays more accessible and stylish with our 45-degree table stand, and adapt your decor to your wants and needs. Experience a new way to present your smart devices and gain full control over your lighting with this smart and functional add-on.

EUR 32.00
1

Light Solutions Spare part: Power Supply to Hue Lightstrip V4 - Smart Home - 5714255008159

Light Solutions Spare part: Power Supply to Hue Lightstrip V4 - Smart Home - 5714255008159

If you own a Philips Hue Lightstrip V4 or Hue Play, you know how important it is to have the right power supply for your LED strips. But if you have ever lost or damaged your power supply, buying a brand new Philips Hue Lightstrip can be frustrating and expensive. Fortunately, there is now a Philips Hue spare part power supply available, which is specially designed to act as a replacement for your original power supply. This Philips Hue Adapter is the perfect spare part for replacing a lost or damaged power supply to your Hue Lightstrip V4 or Hue Play. It is designed to meet the specific power consumption of the Philips Hue LED strips and you can be sure it will supply the necessary power as it is built for Philips Hue. This spare part is easy to use and it is very durable. This means you can use it to supply your Hue LED strips for a long time to come, and you can be sure it will keep your lighting at a high level. So if you need a Philips Hue Lightstrip Adapter that can deliver power to your Hue LED strips, you don't have to worry. This Philips Hue LED strip power supply is the perfect spare part for keeping your Philips Hue Lighstrip running for a long time. Output: 24V 0.83AINKL. Cord between this power supply and the controller* can supply power to a Hue Play or 10 Meter Philips Hue Lightstrip.* Controller not included

EUR 30.82
1

Light Solutions Wall bracket for Google Nest Mini - Smart Home - 5714255009576

Light Solutions Wall bracket for Google Nest Mini - Smart Home - 5714255009576

Optimize your Google Nest Mini with our custom-made wall bracket. This intelligent accessory, carefully produced through 3D printing, allows you to mount your Google Nest Mini on walls or ceilings, opening up a wide range of uses and giving you the freedom to place your device where it suits you best your smart home.It is worth noting that this bracket is designed to be mounted on walls or ceilings and is meant to be screwed up. It allows you to integrate your Google Nest Mini in a more space-saving way and gives you the freedom to choose the location according to your wishes and needs.Whether in the living room, in the kitchen or in the office, this bracket opens up a number of possibilities to optimize the location of your Google Nest Mini. It is ideal for those who want to free up table or cupboard space and create a more minimalist and streamlined interior.Make your Google Nest Mini even more versatile and space-saving with our 3D printed wall bracket. Experience the freedom and flexibility these accessories bring to your smart home decor, and take full control of your audio experience with style and efficiency.

EUR 8.04
1

Light Solutions Wall/ceiling bracket for Homey Pro 2023 - Smart Home - 5714255009477

Light Solutions Wall/ceiling bracket for Homey Pro 2023 - Smart Home - 5714255009477

Optimize your Smart Home setup with our elegant Homey Pro 2023 wall bracket. Safe and stable mounting with trouble -free installation. Transform your Athom Homey Pro into an aesthetic centerpiece of your decor. Revolutions Your Smart Home Detection Discover the ultimate solution to optimize your Smart Home experience with our Homey Pro 2023 Wall Mount Bracket. Designed with precision and style, this 3D printed wall bracket not only offers a safe base for your Athom Homey Pro, but also transforms the way you interact with your Smart Home Hub. By mounting your device on the wall, you release valuable table space and integrate technology beautifully into your daily life. Seamless installation and prolonged stability Our Homey Pro 2023 Wall Mount Bracket is synonymous with trouble -free installation and unmatched stability. With a design that focuses on ease of use, you can quickly and easily mount your Athom Homey Pro without the need for complex tools. This wall bracket ensures that your device remains secure and stable fastened, protective against shocks and vibrations, ensuring long -term functionality and protection. Aesthetic appeal and functionality make a stylish statement in your home with our Homey Pro 2023 Wall Mount Bracket. This device is not only a functional accessory, but also an aesthetic masterpiece. The slim, minimalist design compliments any decor, making your Athom Homey Pro a conspicuous centerpiece that improves the overall look of the room. Experience the perfect balance of form and function and make your Smart Home Hub a conversation piece.

EUR 17.00
1