151 Ergebnisse (0,19601 Sekunden)

Alle Filter anzeigen

Marke

Farbe

Händler

Preis (EUR)

Alles anzeigen

Filter zurücksetzen

Produkte
Von
Shops

Danfoss Connection Kit to The Cold Cable - Kabel Und Draehte - 19805761

Danfoss Connection Kit to The Cold Cable - Kabel Und Draehte - 19805761

Devicrimptmconnectionsset Forcable / Cold Cableself-limitingheating Cables 1 Piece. 2cm Shrink Tubing12/3 Mc225kt Black 1 Piece. Shrink Tubing 19/5black With Glue 3 Pieces. Ritteitte m.Shrink Tube 1.5-2.5mm2 2 Pcs. 1.5cm Shrink Tubing4/1 Iakt Black With Glue 1 Piece. 2.5 cm Shrink Tubing12/3 Mc225kt Blackm-glue 1 Piece. 10 cm Shrink Tubingecc 3/4 Gender 1 Piece. 10 cm Hot Melt Adhesivetape 0.3 - 0.5x25mm 1 Piece. Cable CU Blw0.248 R / m 0.30mm K-20.64

EUR 20.98
1

Danfoss Asv-pv-4g Automatic Balancing Valve 1/2 - Armaturen - 003z5601

Danfoss Asv-pv-4g Automatic Balancing Valve 1/2 - Armaturen - 003z5601

Asv-pv is a Automatic Balancing Valve That Maintains Constant Differential Pressure Across The Riser. Asv-pv Can be Set to Control The Differential Pressure in Several Dp Setting Ranges: Between 5 to 25 Kpa (10 Kpa Factory Setting), 20 to 40 Kpa (30 Kpa), 35 to 75 Kpa (60 Kpa), And 60 to 100 Kpa (80 Kpa). When Supplied Asv-pv is Set at Factory Setting. It Incorporates a Shut-off Function And a Drain Cock. Asv-pv is Designed For Installation in The Return Pipe.

EUR 181.47
1

Danfoss Icon Master Controller Ota 24v With 10 Channels - Fussbodenheizung - 088u1141

Danfoss Icon Master Controller Ota 24v With 10 Channels - Fussbodenheizung - 088u1141

Danfoss Icon Master Controller 24v With 10 Channels. Underfloor Heating Control For The Danfoss Icon Series With 10 Outputs For Thermal Actuators. Up to 10 Room Thermostats, Wireless/wired, Can be Registered. The Master Controller Must be Combined With The Danfoss Icon Radio Module if Wireless Room Thermostats Are to be Registered. Automatic Balancing, Active Pump Relay, Function Test And Potential-free Boiler Relay Are Standard. It is Possible to Purchase The Danfoss Icon App-module Which Provides Access to App-control of The Underfloor Heating System Via an Ios or Android Device. The App-module Also Provides Access to Online Updating of The Master Controller Firmware (Ota). Cooling Control And Demand-controlled Flow Temperature Can be Purchased Using The Danfoss Icon Expansion Module. The Master Controller is Compatible With Zigbee 3.0 Systems Such as Danfoss Ally or 3rd Party Zigbee Systems. For Zigbee Integration, The Danfoss Icon Zigbee Module is Used, Which is Connected to The Master Controller's App Input.

EUR 278.57
1

Danfoss Icon Master Controller Ota 24v With 15 Channels - Fussbodenheizung - 088u1142

Danfoss Icon Master Controller Ota 24v With 15 Channels - Fussbodenheizung - 088u1142

Danfoss Icon Master Controller 24v With 15 Channels. Underfloor Heating Control For The Danfoss Icon Series With 15 Outputs For Thermal Actuators. Up to 15 Room Thermostats, Wireless/wired, Can be Registered. The Master Controller Must be Combined With The Danfoss Icon Radio Module if Wireless Room Thermostats Are to be Registered. Automatic Balancing, Active Pump Relay, Function Test And Potential-free Boiler Relay Are Standard. It is Possible to Purchase The Danfoss Icon App-module Which Provides Access to App-control of The Underfloor Heating System Via an Ios or Android Device. The App-module Also Provides Access to Online Updating of The Master Controller Firmware (Ota). Cooling Control And Demand-controlled Flow Temperature Can be Purchased Using The Danfoss Icon Expansion Module. The Master Controller is Compatible With Zigbee 3.0 Systems Such as Danfoss Ally or 3rd Party Zigbee Systems. For Zigbee Integration, The Danfoss Icon Zigbee Module is Used, Which is Connected to The Master Controller's App Input.

EUR 325.24
1

Danfoss Floor Heating Manifold 4+4 Ssm - Fussbodenheizung - 088u0804

Danfoss Floor Heating Manifold 4+4 Ssm - Fussbodenheizung - 088u0804

Danfoss Ssm Underfloor Heating Manifold in Stainless Steel With Output For 4 Heating Circuits. Ssm Floor Heating Manifolds Are Equipped With Integrated Vents And Filling/draining Function on Both Flow And Return Manifold. Manifold Ssm is Used For Heat Control in Underfloor Heating Systems. Each Hose in The Underfloor Heating System is Connected to The Manifold, Which Makes it Possible to Regulate The Heat Supply to All Rooms in The Building Independently. The Manifold Consists of a Flow Manifold And a Return Manifold. The Flow Manifold Allows You to Close Each Circuit Independently. The Manifold is Without a Built-in Flowmeter. The Return Manifold is Equipped With Danfoss' Preset Valves, Which Ensures Optimal Water Balance in The System. The Manifold Valves Can be Controlled Electronically Using Thermo Actuators. The Manifold is Available in Modules From 2-12 Heating Circuits. In Addition, There Are Fittings That Allow The Manifolds to be Combined in Series - up to a Maximum of 16 Heating Circuits. Ball Valves Are Offered as an Option For Shutdown Between The Manifold And The Rest of The System.

EUR 392.85
1

Danfoss Floor Heating Manifold 12+12 Ssm - Fussbodenheizung - 088u0812

Danfoss Floor Heating Manifold 12+12 Ssm - Fussbodenheizung - 088u0812

Danfoss Ssm Underfloor Heating Manifold in Stainless Steel With Output For 12 Heating Circuits. Ssm Floor Heating Manifolds Are Equipped With Integrated Vents And Filling/draining Function on Both Flow And Return Manifold. Manifold Ssm is Used For Heat Control in Underfloor Heating Systems. Each Hose in The Underfloor Heating System is Connected to The Manifold, Which Makes it Possible to Regulate The Heat Supply to All Rooms in The Building Independently. The Manifold Consists of a Flow Manifold And a Return Manifold. The Flow Manifold Allows You to Close Each Circuit Independently. The Manifold is Without a Built-in Flowmeter. The Return Manifold is Equipped With Danfoss' Preset Valves, Which Ensures Optimal Water Balance in The System. The Manifold Valves Can be Controlled Electronically Using Thermo Actuators. The Manifold is Available in Modules From 2-12 Heating Circuits. In Addition, There Are Fittings That Allow The Manifolds to be Combined in Series - up to a Maximum of 16 Heating Circuits. Ball Valves Are Offered as an Option For Shutdown Between The Manifold And The Rest of The System.

EUR 772.78
1

Danfoss Floor Heating Manifold 12+12 Ssm With Flowmeter - Fussbodenheizung - 088u0762

Danfoss Floor Heating Manifold 12+12 Ssm With Flowmeter - Fussbodenheizung - 088u0762

Danfoss Ssm Underfloor Heating Manifold in Stainless Steel With Output For 12 Heating Circuits And Flow Meters. Ssm Floor Heating Manifolds Are Equipped With Integrated Vents And Filling/draining Function on Both Flow And Return Manifold. Manifold Ssm is Used For Heat Control in Underfloor Heating Systems. Each Hose in The Underfloor Heating System is Connected to The Manifold, Which Makes it Possible to Regulate The Heat Supply to All Rooms in The Building Independently. The Manifold Consists of a Flow Manifold And a Return Manifold. The Flow Manifold Allows You to Close Each Circuit Independently. The Manifold is With a Built-in Flowmeter. The Return Manifold is Equipped With Danfoss' Preset Valves, Which Ensures Optimal Water Balance in The System. The Manifold Valves Can be Controlled Electronically Using Thermo Actuators. The Manifold is Available in Modules From 2-12 Heating Circuits. In Addition, There Are Fittings That Allow The Manifolds to be Combined in Series - up to a Maximum of 16 Heating Circuits. Ball Valves Are Offered as an Option For Shutdown Between The Manifold And The Rest of The System.

EUR 692.93
1

Danfoss Floor Heating Manifold 6+6 Ssm - Fussbodenheizung - 088u0806

Danfoss Floor Heating Manifold 6+6 Ssm - Fussbodenheizung - 088u0806

Danfoss Ssm Underfloor Heating Manifold in Stainless Steel With Output For 6 Heating Circuits. Ssm Floor Heating Manifolds Are Equipped With Integrated Vents And Filling/draining Function on Both Flow And Return Manifold. Manifold Ssm is Used For Heat Control in Underfloor Heating Systems. Each Hose in The Underfloor Heating System is Connected to The Manifold, Which Makes it Possible to Regulate The Heat Supply to All Rooms in The Building Independently. The Manifold Consists of a Flow Manifold And a Return Manifold. The Flow Manifold Allows You to Close Each Circuit Independently. The Manifold is Without a Built-in Flowmeter. The Return Manifold is Equipped With Danfoss' Preset Valves, Which Ensures Optimal Water Balance in The System. The Manifold Valves Can be Controlled Electronically Using Thermo Actuators. The Manifold is Available in Modules From 2-12 Heating Circuits. In Addition, There Are Fittings That Allow The Manifolds to be Combined in Series - up to a Maximum of 16 Heating Circuits. Ball Valves Are Offered as an Option For Shutdown Between The Manifold And The Rest of The System.

EUR 544.82
1

Danfoss Floor Heating Manifold 11+11 Ssm - Fussbodenheizung - 088u0811

Danfoss Floor Heating Manifold 11+11 Ssm - Fussbodenheizung - 088u0811

Danfoss Ssm Underfloor Heating Manifold in Stainless Steel With Output For 11 Heating Circuits. Ssm Floor Heating Manifolds Are Equipped With Integrated Vents And Filling/draining Function on Both Flow And Return Manifold. Manifold Ssm is Used For Heat Control in Underfloor Heating Systems. Each Hose in The Underfloor Heating System is Connected to The Manifold, Which Makes it Possible to Regulate The Heat Supply to All Rooms in The Building Independently. The Manifold Consists of a Flow Manifold And a Return Manifold. The Flow Manifold Allows You to Close Each Circuit Independently. The Manifold is Without a Built-in Flowmeter. The Return Manifold is Equipped With Danfoss' Preset Valves, Which Ensures Optimal Water Balance in The System. The Manifold Valves Can be Controlled Electronically Using Thermo Actuators. The Manifold is Available in Modules From 2-12 Heating Circuits. In Addition, There Are Fittings That Allow The Manifolds to be Combined in Series - up to a Maximum of 16 Heating Circuits. Ball Valves Are Offered as an Option For Shutdown Between The Manifold And The Rest of The System.

EUR 497.16
1

Danfoss Floor Heating Manifold 8+8 Ssm - Fussbodenheizung - 088u0808

Danfoss Floor Heating Manifold 8+8 Ssm - Fussbodenheizung - 088u0808

Danfoss Ssm Underfloor Heating Manifold in Stainless Steel With Output For 8 Heating Circuits. Ssm Floor Heating Manifolds Are Equipped With Integrated Vents And Filling/draining Function on Both Flow And Return Manifold. Manifold Ssm is Used For Heat Control in Underfloor Heating Systems. Each Hose in The Underfloor Heating System is Connected to The Manifold, Which Makes it Possible to Regulate The Heat Supply to All Rooms in The Building Independently. The Manifold Consists of a Flow Manifold And a Return Manifold. The Flow Manifold Allows You to Close Each Circuit Independently. The Manifold is Without a Built-in Flowmeter. The Return Manifold is Equipped With Danfoss' Preset Valves, Which Ensures Optimal Water Balance in The System. The Manifold Valves Can be Controlled Electronically Using Thermo Actuators. The Manifold is Available in Modules From 2-12 Heating Circuits. In Addition, There Are Fittings That Allow The Manifolds to be Combined in Series - up to a Maximum of 16 Heating Circuits. Ball Valves Are Offered as an Option For Shutdown Between The Manifold And The Rest of The System.

EUR 700.78
1

Danfoss Floor Heating Manifold 5+5 Ssm - Fussbodenheizung - 088u0805

Danfoss Floor Heating Manifold 5+5 Ssm - Fussbodenheizung - 088u0805

Danfoss Ssm Underfloor Heating Manifold in Stainless Steel With Output For 5 Heating Circuits. Ssm Floor Heating Manifolds Are Equipped With Integrated Vents And Filling/draining Function on Both Flow And Return Manifold. Manifold Ssm is Used For Heat Control in Underfloor Heating Systems. Each Hose in The Underfloor Heating System is Connected to The Manifold, Which Makes it Possible to Regulate The Heat Supply to All Rooms in The Building Independently. The Manifold Consists of a Flow Manifold And a Return Manifold. The Flow Manifold Allows You to Close Each Circuit Independently. The Manifold is Without a Built-in Flowmeter. The Return Manifold is Equipped With Danfoss' Preset Valves, Which Ensures Optimal Water Balance in The System. The Manifold Valves Can be Controlled Electronically Using Thermo Actuators. The Manifold is Available in Modules From 2-12 Heating Circuits. In Addition, There Are Fittings That Allow The Manifolds to be Combined in Series - up to a Maximum of 16 Heating Circuits. Ball Valves Are Offered as an Option For Shutdown Between The Manifold And The Rest of The System.

EUR 468.83
1

Danfoss Floor Heating Manifold 9+9 Ssm - Fussbodenheizung - 088u0809

Danfoss Floor Heating Manifold 9+9 Ssm - Fussbodenheizung - 088u0809

Danfoss Ssm Underfloor Heating Manifold in Stainless Steel With Output For 9 Heating Circuits. Ssm Floor Heating Manifolds Are Equipped With Integrated Vents And Filling/draining Function on Both Flow And Return Manifold. Manifold Ssm is Used For Heat Control in Underfloor Heating Systems. Each Hose in The Underfloor Heating System is Connected to The Manifold, Which Makes it Possible to Regulate The Heat Supply to All Rooms in The Building Independently. The Manifold Consists of a Flow Manifold And a Return Manifold. The Flow Manifold Allows You to Close Each Circuit Independently. The Manifold is Without a Built-in Flowmeter. The Return Manifold is Equipped With Danfoss' Preset Valves, Which Ensures Optimal Water Balance in The System. The Manifold Valves Can be Controlled Electronically Using Thermo Actuators. The Manifold is Available in Modules From 2-12 Heating Circuits. In Addition, There Are Fittings That Allow The Manifolds to be Combined in Series - up to a Maximum of 16 Heating Circuits. Ball Valves Are Offered as an Option For Shutdown Between The Manifold And The Rest of The System.

EUR 790.20
1

Danfoss Floor Heating Manifold 11+11 Ssm With Flowmeter - Fussbodenheizung - 088u0761

Danfoss Floor Heating Manifold 11+11 Ssm With Flowmeter - Fussbodenheizung - 088u0761

Danfoss Ssm Underfloor Heating Manifold in Stainless Steel With Output For 11 Heating Circuits And Flow Meters. Ssm Floor Heating Manifolds Are Equipped With Integrated Vents And Filling/draining Function on Both Flow And Return Manifold. Manifold Ssm is Used For Heat Control in Underfloor Heating Systems. Each Hose in The Underfloor Heating System is Connected to The Manifold, Which Makes it Possible to Regulate The Heat Supply to All Rooms in The Building Independently. The Manifold Consists of a Flow Manifold And a Return Manifold. The Flow Manifold Allows You to Close Each Circuit Independently. The Manifold is With a Built-in Flowmeter. The Return Manifold is Equipped With Danfoss' Preset Valves, Which Ensures Optimal Water Balance in The System. The Manifold Valves Can be Controlled Electronically Using Thermo Actuators. The Manifold is Available in Modules From 2-12 Heating Circuits. In Addition, There Are Fittings That Allow The Manifolds to be Combined in Series - up to a Maximum of 16 Heating Circuits. Ball Valves Are Offered as an Option For Shutdown Between The Manifold And The Rest of The System.

EUR 639.03
1

Danfoss Floor Heating Manifold 2+2 Ssm - Fussbodenheizung - 088u0802

Danfoss Floor Heating Manifold 2+2 Ssm - Fussbodenheizung - 088u0802

Danfoss Ssm Underfloor Heating Manifold in Stainless Steel With Output For 2 Heating Circuits. Ssm Floor Heating Manifolds Are Equipped With Integrated Vents And Filling/draining Function on Both Flow And Return Manifold. Manifold Ssm is Used For Heat Control in Underfloor Heating Systems. Each Hose in The Underfloor Heating System is Connected to The Manifold, Which Makes it Possible to Regulate The Heat Supply to All Rooms in The Building Independently. The Manifold Consists of a Flow Manifold And a Return Manifold. The Flow Manifold Allows You to Close Each Circuit Independently. The Manifold is Without a Built-in Flowmeter. The Return Manifold is Equipped With Danfoss' Preset Valves, Which Ensures Optimal Water Balance in The System. The Manifold Valves Can be Controlled Electronically Using Thermo Actuators. The Manifold is Available in Modules From 2-12 Heating Circuits. In Addition, There Are Fittings That Allow The Manifolds to be Combined in Series - up to a Maximum of 16 Heating Circuits. Ball Valves Are Offered as an Option For Shutdown Between The Manifold And The Rest of The System.

EUR 276.88
1

Danfoss Floor Heating Manifold 7+7 Ssm - Fussbodenheizung - 088u0807

Danfoss Floor Heating Manifold 7+7 Ssm - Fussbodenheizung - 088u0807

Danfoss Ssm Underfloor Heating Manifold in Stainless Steel With Output For 7 Heating Circuits. Ssm Floor Heating Manifolds Are Equipped With Integrated Vents And Filling/draining Function on Both Flow And Return Manifold. Manifold Ssm is Used For Heat Control in Underfloor Heating Systems. Each Hose in The Underfloor Heating System is Connected to The Manifold, Which Makes it Possible to Regulate The Heat Supply to All Rooms in The Building Independently. The Manifold Consists of a Flow Manifold And a Return Manifold. The Flow Manifold Allows You to Close Each Circuit Independently. The Manifold is Without a Built-in Flowmeter. The Return Manifold is Equipped With Danfoss' Preset Valves, Which Ensures Optimal Water Balance in The System. The Manifold Valves Can be Controlled Electronically Using Thermo Actuators. The Manifold is Available in Modules From 2-12 Heating Circuits. In Addition, There Are Fittings That Allow The Manifolds to be Combined in Series - up to a Maximum of 16 Heating Circuits. Ball Valves Are Offered as an Option For Shutdown Between The Manifold And The Rest of The System.

EUR 622.88
1

Danfoss Floor Heating Manifold 10+10 Ssm - Fussbodenheizung - 088u0810

Danfoss Floor Heating Manifold 10+10 Ssm - Fussbodenheizung - 088u0810

Danfoss Ssm Underfloor Heating Manifold in Stainless Steel With Output For 10 Heating Circuits. Ssm Floor Heating Manifolds Are Equipped With Integrated Vents And Filling/draining Function on Both Flow And Return Manifold. Manifold Ssm is Used For Heat Control in Underfloor Heating Systems. Each Hose in The Underfloor Heating System is Connected to The Manifold, Which Makes it Possible to Regulate The Heat Supply to All Rooms in The Building Independently. The Manifold Consists of a Flow Manifold And a Return Manifold. The Flow Manifold Allows You to Close Each Circuit Independently. The Manifold is Without a Built-in Flowmeter. The Return Manifold is Equipped With Danfoss' Preset Valves, Which Ensures Optimal Water Balance in The System. The Manifold Valves Can be Controlled Electronically Using Thermo Actuators. The Manifold is Available in Modules From 2-12 Heating Circuits. In Addition, There Are Fittings That Allow The Manifolds to be Combined in Series - up to a Maximum of 16 Heating Circuits. Ball Valves Are Offered as an Option For Shutdown Between The Manifold And The Rest of The System.

EUR 875.62
1

Danfoss Mbc 5100 Block-type Compact Pressure Switches - Prozessinstrumentierung - 061b100566

Danfoss Mbc 5100 Block-type Compact Pressure Switches - Prozessinstrumentierung - 061b100566

Mbc Pressure Switches Are Used in Marine Applications Where Space And Reliability Are The Most Important Features. Mbcs Are Compact Pressure Switches, Designed According to Our New Block Design to Survive in The Harsh Conditions Known From Machine Rooms Onboard Ships.Mbcs Have High Vibration Resistance And Feature All Commonly Marine Approvals. The Fixed, But Low Differential Guarantees Accurate Monitoring of Critical Pressures. Mbv Test Valves Can be Delivered as Standard Option For Mbc Pressure Switches. All Relevant Marine Approvals Pressure Ranges: -0.2 to 400 Bar Low Differential (Fixed) Micro Switch Resistant to Shock And Vibrations Enclosure Ip65 Diaphragm Version For Applications With Pulsations/pressure Peaks Compact Design Low Installations Costs Fast And Easy to Operate Easy to Mount on Block Test Valve Available as Differential Pressure Switch

EUR 201.99
1