111 Ergebnisse (0,22703 Sekunden)

Alle Filter anzeigen

Marke

Farbe

Händler

Preis (EUR)

Alles anzeigen

Filter zurücksetzen

Produkte
Von
Shops

Unidrain Glassline Fixed Module Right-sided Shower Enclosure - Duschabtrennungen Duschkabinen Und Zubehoer - 5002.0909

Unidrain Glassline Fixed Module Right-sided Shower Enclosure - Duschabtrennungen Duschkabinen Und Zubehoer - 5002.0909

Glassline - Fixed Module - Right-side Shower Wall: W 900 mm, D 900 mm. Glassline Fixed Module is a U-shaped Module, With a Floor Drain as The Middle Long, a Rail With Tracks For Placement of The Shower Wall as Right/left Long, And a Rail For Fixed Mounting on The Wall on The Last Long. All The Way Around, There Are Horizontal/vertical Flanges That, Together With The Overlapping Wet Room Membrane, Ensure a 100% Tight Installation.The Fixed Module Has Two Floor Levels: On The Inside of The Shower Wall, a 2% Drop is Built Into The Module, so The Concrete Can Easily be Pulled Off And Get The Correct Drop, on The Outside of The Shower Wall, The Rail is Level, so it is Easy to Work Further With The Rest of The Bathroom Floor.The Fixed Module is Available in Different Dimensions, And is Combined With a Shower Wall, Outlet Housing, Frame And Grate/panel. You Can Choose Between Both Classicline And Highline Solutions.

EUR 702.88
1

Unidrain Odour Barrier For Corner Drain - Entwaesserungsprodukte - 2821.0030

Unidrain Odour Barrier For Corner Drain - Entwaesserungsprodukte - 2821.0030

Has an Automatic Odour Barrier Instead of a Water Trap, so That it Cannot Dry Out. The Odour Barrier Can be Removed For Cleaning. Va-approved. - Should Not be Used in Multi-storey Buildings - The Odour Barrier May React to Over-pressure And Under-pressure in The Drain System - Correct Ventilation of The Drain System is Important - The Odour Barrier Opens And Closes With The Help of a Spring - A Rubber Seal Ensures That The Odour Barrier is Closed When Not in Use

EUR 75.43
1

Unidrain Water Trap Self-cleaning - Entwaesserungsprodukte - 1820.0080

Unidrain Water Trap Self-cleaning - Entwaesserungsprodukte - 1820.0080

Self-cleaning Trap With a Capacity of 0.4-0.6 L/s Depending on The Outlet Unit it is Installed in. Meets The Requirements For Capacity And Self-cleaning According to En1253 (The Pan-european Standard For Floor Drains) And is VA Approved. Suitable For Most Outlet Units, Including Older Models. Can Replace Water Trap 1820.0010 And 1820.0040, if They Are Installed at The Top of The Drain Unit. A Hook to Lift The Water Trap up From The Outlet Unit And a Packet of Silicone Lubricant Are Included

EUR 39.65
1

Unidrain Highline Cassette 900/10 mm - Entwaesserungsprodukte - 1940.0910

Unidrain Highline Cassette 900/10 mm - Entwaesserungsprodukte - 1940.0910

The Set Consists of a Cassette, Rail, Heightener Set And Screws. The Set Must be Assembled Before Installation. Available in 10, 12, 15 And 25 mm Heights (Depending on The Thickness of The Floor Tile). Supplement Cassette With Your Own Material (e.g. Matching Floor Tile), to Complete The Solution. The Cassette Solution is Placed Directly Inside The Drain Unit. The Rail is Specially Designed to Provide a Snug Fit.

EUR 367.64
1

Unidrain Highline Cassette 1000/10 mm - Entwaesserungsprodukte - 1940.1010

Unidrain Highline Cassette 1000/10 mm - Entwaesserungsprodukte - 1940.1010

The Set Consists of a Cassette, Rail, Heightener Set And Screws. The Set Must be Assembled Before Installation. Available in 10, 12, 15 And 25 mm Heights (Depending on The Thickness of The Floor Tile). Supplement Cassette With Your Own Material (e.g. Matching Floor Tile), to Complete The Solution. The Cassette Solution is Placed Directly Inside The Drain Unit. The Rail is Specially Designed to Provide a Snug Fit.

EUR 397.98
1

Unidrain Highline Cassette 800/12 mm - Entwaesserungsprodukte - 1940.0812

Unidrain Highline Cassette 800/12 mm - Entwaesserungsprodukte - 1940.0812

The Set Consists of a Cassette, Rail, Heightener Set And Screws. The Set Must be Assembled Before Installation. Available in 10, 12, 15 And 25 mm Heights (Depending on The Thickness of The Floor Tile). Supplement Cassette With Your Own Material (e.g. Matching Floor Tile), to Complete The Solution. The Cassette Solution is Placed Directly Inside The Drain Unit. The Rail is Specially Designed to Provide a Snug Fit.

EUR 177.58
1

Unidrain Highline Cassette 900/12 mm - Entwaesserungsprodukte - 1940.0912

Unidrain Highline Cassette 900/12 mm - Entwaesserungsprodukte - 1940.0912

The Set Consists of a Cassette, Rail, Heightener Set And Screws. The Set Must be Assembled Before Installation. Available in 10, 12, 15 And 25 mm Heights (Depending on The Thickness of The Floor Tile). Supplement Cassette With Your Own Material (e.g. Matching Floor Tile), to Complete The Solution. The Cassette Solution is Placed Directly Inside The Drain Unit. The Rail is Specially Designed to Provide a Snug Fit.

EUR 374.69
1

Unidrain Highline Cassette 800/10 mm - Entwaesserungsprodukte - 1940.0810

Unidrain Highline Cassette 800/10 mm - Entwaesserungsprodukte - 1940.0810

The Set Consists of a Cassette, Rail, Heightener Set And Screws. The Set Must be Assembled Before Installation. Available in 10, 12, 15 And 25 mm Heights (Depending on The Thickness of The Floor Tile). Supplement Cassette With Your Own Material (e.g. Matching Floor Tile), to Complete The Solution. The Cassette Solution is Placed Directly Inside The Drain Unit. The Rail is Specially Designed to Provide a Snug Fit.

EUR 180.73
1

Unidrain Classicline Frame 1000/8 mm Brushed Steel - Entwaesserungsprodukte - 1500.1008

Unidrain Classicline Frame 1000/8 mm Brushed Steel - Entwaesserungsprodukte - 1500.1008

Available in 8, 10 And 12 mm Heights (Depending on The Thickness of The Floor Tile). The Rubber Insert Ensures a Snug Fit Inside The Unit. A Countersunk Bearing Ensures That The Grating Fits Perfectly Into The Frame. The Frame is Non-optional And Has Two Functions: To Support The Grating And Give a Perfectly Flush Finish With The Tiled Floor. NB! Frame Height (H) = Tile Thickness + Approximately 2 mm For Tile Mortar And Membrane.

EUR 93.91
1

Unidrain Classicline Frame 900/10 mm Brushed Steel - Entwaesserungsprodukte - 1500.0910

Unidrain Classicline Frame 900/10 mm Brushed Steel - Entwaesserungsprodukte - 1500.0910

Available in 8, 10 And 12 mm Heights (Depending on The Thickness of The Floor Tile). The Rubber Insert Ensures a Snug Fit Inside The Unit. A Countersunk Bearing Ensures That The Grating Fits Perfectly Into The Frame. The Frame is Non-optional And Has Two Functions: To Support The Grating And Give a Perfectly Flush Finish With The Tiled Floor. NB! Frame Height (H) = Tile Thickness + Approximately 2 mm For Tile Mortar And Membrane.

EUR 80.91
1

Unidrain Classicline Frame 1000/12 mm Brushed Steel - Entwaesserungsprodukte - 1500.1012

Unidrain Classicline Frame 1000/12 mm Brushed Steel - Entwaesserungsprodukte - 1500.1012

Available in 8, 10 And 12 mm Heights (Depending on The Thickness of The Floor Tile). The Rubber Insert Ensures a Snug Fit Inside The Unit. A Countersunk Bearing Ensures That The Grating Fits Perfectly Into The Frame. The Frame is Non-optional And Has Two Functions: To Support The Grating And Give a Perfectly Flush Finish With The Tiled Floor. NB! Frame Height (H) = Tile Thickness + Approximately 2 mm For Tile Mortar And Membrane.

EUR 78.12
1

Unidrain Classicline Frame 700/10 mm Brushed Steel - Entwaesserungsprodukte - 1500.0710

Unidrain Classicline Frame 700/10 mm Brushed Steel - Entwaesserungsprodukte - 1500.0710

Available in 8, 10 And 12 mm Heights (Depending on The Thickness of The Floor Tile). The Rubber Insert Ensures a Snug Fit Inside The Unit. A Countersunk Bearing Ensures That The Grating Fits Perfectly Into The Frame. The Frame is Non-optional And Has Two Functions: To Support The Grating And Give a Perfectly Flush Finish With The Tiled Floor. NB! Frame Height (H) = Tile Thickness + Approximately 2 mm For Tile Mortar And Membrane.

EUR 77.91
1

Unidrain Classicline Frame 700/8 mm Brushed Steel - Entwaesserungsprodukte - 1500.0708

Unidrain Classicline Frame 700/8 mm Brushed Steel - Entwaesserungsprodukte - 1500.0708

Available in 8, 10 And 12 mm Heights (Depending on The Thickness of The Floor Tile). The Rubber Insert Ensures a Snug Fit Inside The Unit. A Countersunk Bearing Ensures That The Grating Fits Perfectly Into The Frame. The Frame is Non-optional And Has Two Functions: To Support The Grating And Give a Perfectly Flush Finish With The Tiled Floor. NB! Frame Height (H) = Tile Thickness + Approximately 2 mm For Tile Mortar And Membrane.

EUR 71.91
1

Unidrain Classicline Frame 800/10 mm Brushed Steel - Entwaesserungsprodukte - 1500.0810

Unidrain Classicline Frame 800/10 mm Brushed Steel - Entwaesserungsprodukte - 1500.0810

Available in 8, 10 And 12 mm Heights (Depending on The Thickness of The Floor Tile). The Rubber Insert Ensures a Snug Fit Inside The Unit. A Countersunk Bearing Ensures That The Grating Fits Perfectly Into The Frame. The Frame is Non-optional And Has Two Functions: To Support The Grating And Give a Perfectly Flush Finish With The Tiled Floor. NB! Frame Height (H) = Tile Thickness + Approximately 2 mm For Tile Mortar And Membrane.

EUR 79.91
1

Unidrain Classicline Frame 1200/10 mm Brushed Steel - Entwaesserungsprodukte - 1500.1210

Unidrain Classicline Frame 1200/10 mm Brushed Steel - Entwaesserungsprodukte - 1500.1210

Available in 8, 10 And 12 mm Heights (Depending on The Thickness of The Floor Tile). The Rubber Insert Ensures a Snug Fit Inside The Unit. A Countersunk Bearing Ensures That The Grating Fits Perfectly Into The Frame. The Frame is Non-optional And Has Two Functions: To Support The Grating And Give a Perfectly Flush Finish With The Tiled Floor. NB! Frame Height (H) = Tile Thickness + Approximately 2 mm For Tile Mortar And Membrane.

EUR 203.73
1

Unidrain Classicline Frame 600/12 mm Brushed Steel - Entwaesserungsprodukte - 1500.0612

Unidrain Classicline Frame 600/12 mm Brushed Steel - Entwaesserungsprodukte - 1500.0612

Available in 8, 10 And 12 mm Heights (Depending on The Thickness of The Floor Tile). The Rubber Insert Ensures a Snug Fit Inside The Unit. A Countersunk Bearing Ensures That The Grating Fits Perfectly Into The Frame. The Frame is Non-optional And Has Two Functions: To Support The Grating And Give a Perfectly Flush Finish With The Tiled Floor. NB! Frame Height (H) = Tile Thickness + Approximately 2 mm For Tile Mortar And Membrane.

EUR 58.89
1

Unidrain Classicline Frame 1000/10 mm Brushed Steel - Entwaesserungsprodukte - 1500.1010

Unidrain Classicline Frame 1000/10 mm Brushed Steel - Entwaesserungsprodukte - 1500.1010

Available in 8, 10 And 12 mm Heights (Depending on The Thickness of The Floor Tile). The Rubber Insert Ensures a Snug Fit Inside The Unit. A Countersunk Bearing Ensures That The Grating Fits Perfectly Into The Frame. The Frame is Non-optional And Has Two Functions: To Support The Grating And Give a Perfectly Flush Finish With The Tiled Floor. NB! Frame Height (H) = Tile Thickness + Approximately 2 mm For Tile Mortar And Membrane.

EUR 85.91
1

Unidrain Classicline Frame 300/8 mm Brushed Steel - Entwaesserungsprodukte - 1500.0308

Unidrain Classicline Frame 300/8 mm Brushed Steel - Entwaesserungsprodukte - 1500.0308

Available in 8, 10 And 12 mm Heights (Depending on The Thickness of The Floor Tile). The Rubber Insert Ensures a Snug Fit Inside The Unit. A Countersunk Bearing Ensures That The Grating Fits Perfectly Into The Frame. The Frame is Non-optional And Has Two Functions: To Support The Grating And Give a Perfectly Flush Finish With The Tiled Floor. NB! Frame Height (H) = Tile Thickness + Approximately 2 mm For Tile Mortar And Membrane.

EUR 103.06
1

Unidrain Classicline Frame 300/10 mm Brushed Steel - Entwaesserungsprodukte - 1500.0310

Unidrain Classicline Frame 300/10 mm Brushed Steel - Entwaesserungsprodukte - 1500.0310

Available in 8, 10 And 12 mm Heights (Depending on The Thickness of The Floor Tile). The Rubber Insert Ensures a Snug Fit Inside The Unit. A Countersunk Bearing Ensures That The Grating Fits Perfectly Into The Frame. The Frame is Non-optional And Has Two Functions: To Support The Grating And Give a Perfectly Flush Finish With The Tiled Floor. NB! Frame Height (H) = Tile Thickness + Approximately 2 mm For Tile Mortar And Membrane.

EUR 56.91
1

Unidrain Classicline Frame 600/10 mm Brushed Steel - Entwaesserungsprodukte - 1500.0610

Unidrain Classicline Frame 600/10 mm Brushed Steel - Entwaesserungsprodukte - 1500.0610

Available in 8, 10 And 12 mm Heights (Depending on The Thickness of The Floor Tile). The Rubber Insert Ensures a Snug Fit Inside The Unit. A Countersunk Bearing Ensures That The Grating Fits Perfectly Into The Frame. The Frame is Non-optional And Has Two Functions: To Support The Grating And Give a Perfectly Flush Finish With The Tiled Floor. NB! Frame Height (H) = Tile Thickness + Approximately 2 mm For Tile Mortar And Membrane.

EUR 65.83
1

Unidrain Complete Drain System Corner Vertical Ø75 mm - Entwaesserungsprodukte - 4012.0200

Unidrain Complete Drain System Corner Vertical Ø75 mm - Entwaesserungsprodukte - 4012.0200

Classicline Corner Drain Kit - Vertical Ø 75, Column, H 10 mm. The Drain Kit is The Simple Solution That Contains All The Necessary Parts For a Unidrain® Classicline System. The Solution is Composed of The Best-selling Products, Which Can Therefore Meet The Needs of Most Bathrooms. The Solution is Available in Lengths of 700, 800, 900 And 1000 mm And as a Corner Solution, And Includes: Classicline Grate (Column), Classicline Frame (H 10 mm), Wooden Slats, Drainage Fixture (1004 With Back Flange) And Outlet Housing (Ø75mm Vertical Incl. Trap).

EUR 369.06
1