99 Ergebnisse (0,19644 Sekunden)

Alle Filter anzeigen

Marke

Farbe

Händler

Preis (EUR)

Alles anzeigen

Filter zurücksetzen

Produkte
Von
Shops

Viega Prestabo Bend 45° 54 Steel/galvanized 558321 - Druckrohre Und Armaturen

Viega Prestabo Bend 45° 54 Steel/galvanized 558321 - Druckrohre Und Armaturen

Press Connector Systems With Press Connectors And Pipes Made of Non-alloy Steel 1.0308 (E235), in Acc. With EN 10305-3, Externally Galvanised With a Zinc Layer Thickness of 8-15 m (Blue Chromatised).Press Connectorsall Sizes With Sc-contur - Connections, Which Remain Unpressed Become Visible When The System is Filled. The Sc-contur is Certified And Fulfils The Requirements of Dvgw Worksheet W 534, Point 12.14, Connectors With Forced Leakage.During Leakage Tests With Water, Viega Guarantees The Identification of Unpressed Connections in The Pressure Range 0.1 Mpa-0.65 Mpa, in The Case of a Dry Leakage Test With Compressed Air or Noble Gases From 22 Hpa-0.3 Mpa.Markingred Symbol (to Prevent Confusion With Sanpress Inox (Stainless Steel) Articles) »Not For Drinking Water Installations«Sealing Elementsepdm, Black (Ethylene-propylene-dien-monomer Rubber),Not Resistant Against Hydrocarbon Solvent, Chlorinated Hydrocarbon Solvents, Turpentine, Petrol, Fkm, Dull Blackdimensionsd38

EUR 25.86
1

Viega Prestabo Bend 45° 42 Steel/galvanized 558314 - Druckrohre Und Armaturen

Viega Prestabo Bend 45° 42 Steel/galvanized 558314 - Druckrohre Und Armaturen

Press Connector Systems With Press Connectors And Pipes Made of Non-alloy Steel 1.0308 (E235), in Acc. With EN 10305-3, Externally Galvanised With a Zinc Layer Thickness of 8-15 m (Blue Chromatised).Press Connectorsall Sizes With Sc-contur - Connections, Which Remain Unpressed Become Visible When The System is Filled. The Sc-contur is Certified And Fulfils The Requirements of Dvgw Worksheet W 534, Point 12.14, Connectors With Forced Leakage.During Leakage Tests With Water, Viega Guarantees The Identification of Unpressed Connections in The Pressure Range 0.1 Mpa-0.65 Mpa, in The Case of a Dry Leakage Test With Compressed Air or Noble Gases From 22 Hpa-0.3 Mpa.Markingred Symbol (to Prevent Confusion With Sanpress Inox (Stainless Steel) Articles) »Not For Drinking Water Installations«Sealing Elementsepdm, Black (Ethylene-propylene-dien-monomer Rubber),Not Resistant Against Hydrocarbon Solvent, Chlorinated Hydrocarbon Solvents, Turpentine, Petrol, Fkm, Dull Blackdimensionsd38

EUR 20.03
1

Viega Profipress Bend 90° 22 Copper/bright 291518 - Druckrohre Und Armaturen

Viega Profipress Bend 90° 22 Copper/bright 291518 - Druckrohre Und Armaturen

Press Connector System With Press Connectors Made of Copper And Gunmetal Tested in Acc. With Dvgw Worksheet W 534 With Dvgw Test Seal And Pipes Made of Copper in Acc. With EN 1057 in Acc. With Dvgw Worksheet GW 392.Suitable For Drinking Water Installations in Acc. With Din 1988.For Dimensionally Stable Concealed And Pre-wall Installations of Manifold And Riser Pipes in Viega Component Assembly.Press Connectorsall Sizes With Sc-contur - Connections, Which Remain Unpressed Become Visible When The System is Filled. The Sc-contur is Certified And Fulfils The Requirements of Dvgw Worksheet W 534, Point 12.14, Connectors With Forced Leakage.During Leakage Tests With Water, Viega Guarantees The Identification of Unpressed Connections in The Pressure Range 0.1 Mpa-0.65 Mpa, in The Case of a Dry Leakage Test With Compressed Air or Noble Gases From 22 Hpa-0.3 Mpa.Markinggreen Dot on The Press Connectionsealing Elementsepdm, Black (Ethylene-propylene-dien-monomer Rubber), up to 110 °C

EUR 8.19
1

Viega Sanpress XL Bend 45° 88.9 Gunmetal/glossy 353698 - Druckrohre Und Armaturen

Viega Sanpress XL Bend 45° 88.9 Gunmetal/glossy 353698 - Druckrohre Und Armaturen

Press Connector System With Press Connectors Made of Copper And Gunmetal Tested in Acc. With Dvgw Worksheet W 534 With Dvgw Test Seal And Pipes Made of Copper in Acc. With EN 1057 in Acc. With Dvgw Worksheet GW 392.Suitable For Drinking Water Installations in Acc. With Din 1988.For Dimensionally Stable Concealed And Pre-wall Installations of Manifold And Riser Pipes in Viega Component Assembly.Press Connectorsall Sizes With Sc-contur - Connections, Which Remain Unpressed Become Visible When The System is Filled. The Sc-contur is Certified And Fulfils The Requirements of Dvgw Worksheet W 534, Point 12.14, Connectors With Forced Leakage.During Leakage Tests With Water, Viega Guarantees The Identification of Unpressed Connections in The Pressure Range 0.1 Mpa-0.65 Mpa, in The Case of a Dry Leakage Test With Compressed Air or Noble Gases From 22 Hpa-0.3 Mpa.Markinggreen Dot on The Press Connectionsealing Elementsepdm, Black (Ethylene-propylene-dien-monomer Rubber), up to 110 °C

EUR 212.15
1

Viega Sanpress XL Bend 90° 88.9 Gunmetal/glossy 350680 - Druckrohre Und Armaturen

Viega Sanpress XL Bend 90° 88.9 Gunmetal/glossy 350680 - Druckrohre Und Armaturen

Press Connector System With Press Connectors Made of Copper And Gunmetal Tested in Acc. With Dvgw Worksheet W 534 With Dvgw Test Seal And Pipes Made of Copper in Acc. With EN 1057 in Acc. With Dvgw Worksheet GW 392.Suitable For Drinking Water Installations in Acc. With Din 1988.For Dimensionally Stable Concealed And Pre-wall Installations of Manifold And Riser Pipes in Viega Component Assembly.Press Connectorsall Sizes With Sc-contur - Connections, Which Remain Unpressed Become Visible When The System is Filled. The Sc-contur is Certified And Fulfils The Requirements of Dvgw Worksheet W 534, Point 12.14, Connectors With Forced Leakage.During Leakage Tests With Water, Viega Guarantees The Identification of Unpressed Connections in The Pressure Range 0.1 Mpa-0.65 Mpa, in The Case of a Dry Leakage Test With Compressed Air or Noble Gases From 22 Hpa-0.3 Mpa.Markinggreen Dot on The Press Connectionsealing Elementsepdm, Black (Ethylene-propylene-dien-monomer Rubber), up to 110 °C

EUR 245.14
1

Viega Profipress g Elbow 45° 35 345648 - Druckrohre Und Armaturen

Viega Profipress g Elbow 45° 35 345648 - Druckrohre Und Armaturen

Press Connector System With Press Connectors And Pipes Made of Copper in Acc. With EN 1057 And Dvgw Worksheet GW 392 Suitable For:•Gases in Acc. With Dvgw G 260 in Gas Installations in Acc. With Dvgw-trgi 2008 (Dvgw Worksheet G 600) / Dvfg-trf 2012•Liquid Gas in The Gas Phase For Domestic And Commercial Applications, Tested in Acc. With Dvgw Worksheet G 5614•Heating Oil Pipelines For Heating Oil in Acc. With Din 51603-1•Diesel Fuel Pipelines For Diesel Fuel, as Suction And Pressure Pipelines in Acc. With EN 590 in Consideration of The General Technical Approval Z-38.4-71press Connectorsall Sizes With Sc-contur - Connections, Which Remain Unpressed Become Visible When The System is Filled. The Sc-contur is Certified And Fulfils The Requirements of Dvgw Worksheet G 5614, Point 4.4.1, Connectors With Forced Leakage.During Leakage Tests With Water, Viega Guarantees The Identification of Unpressed Connections in The Pressure Range 0.1 Mpa-0.65 Mpa, in The Case of a Dry Leakage Test With Compressed Air or Noble Gases From 22 Hpa-0.3 Mpa.Markingyellow Dot, Yellow Rectangle And Inscription »Gas Mop 5 / Gt1«Sealing Elementshnbr, Yellowdimensions/materialstandard Sizes: d 12, 15, 18, 22, 28, 35, 42, 54 Made of Copperxl Sizes: d 64.0 Made of Copperpress Connectors With Threaded Connection d 12-54 Made of Gunmetalxl Press Connectors With Threaded Connection d 64.0 Made of Copperareas of Applicationnatural Gas/liquid Gasheating Oil/diesel Fuel (d 12-54)Noteonly Viega Copper And Gunmetal Press Connectors, Which Are Marked With a Yellow Rectangle And Have The Inscription »Gas Mop 5 / Gt1« Are Permitted For Use in Installations For Gas, Heating Oil And Diesel Fuel Systems!Use of The System For Application Areas And Media Other Than Those Described Here Must be Agreed With Viega Service Center Through a Material Request.Operating Conditionsgas And Liquid Gas Systems•Operating Temperature -20 °C up to +70 °C•Operating Pressure Max. 0.5 Mpa•Operatin

EUR 27.27
1

Viega Easytop Ball Valve 22 mm x 3/4" Gunmetal - Armaturen - 747084

Viega Easytop Ball Valve 22 mm x 3/4" Gunmetal - Armaturen - 747084

Easytop Ball Valve With Sc-contur- For Water- And Heat Meter- Not Suitable For Easytop Insulating Shell 2275.90- Press Connection, G-threadcomponentsvalve Casing Gunmetal or Silicium Bronze According to Din 50930-6 / Din EN 1982, Maintenance-free Selector Shaft, Black Powder-coated Actuating Lever Made of Metal, Epdm Sealing Element, Epdm Flat Seal.Technical Dataoperating Pressure Max. 1.6 Mpa (PN 16)Operating Temperature Max. 110 °Cwith Dvgw-test Mark DN: 20, d: 22, G: 34

EUR 114.61
1

Viega Easytop Ball Valve 15 mm x 3/4" Gunmetal - Armaturen - 747060

Viega Easytop Ball Valve 15 mm x 3/4" Gunmetal - Armaturen - 747060

Easytop Ball Valve With Sc-contur- For Water- And Heat Meter- Not Suitable For Easytop Insulating Shell 2275.90- Press Connection, G-threadcomponentsvalve Casing Gunmetal or Silicium Bronze According to Din 50930-6 / Din EN 1982, Maintenance-free Selector Shaft, Black Powder-coated Actuating Lever Made of Metal, Epdm Sealing Element, Epdm Flat Seal.Technical Data Operating Pressure Max. 1.6 Mpa (PN 16) Operating Temperature Max. 110 °Cwith Dvgw-test Mark DN: 15, d: 15, G: 34

EUR 42.81
1

Viega Easytop Ball Valve 18 mm x 3/4" Gunmetal - Armaturen - 747077

Viega Easytop Ball Valve 18 mm x 3/4" Gunmetal - Armaturen - 747077

Easytop Ball Valve With Sc-contur- For Water- And Heat Meter- Not Suitable For Easytop Insulating Shell 2275.90- Press Connection, G-threadcomponentsvalve Casing Gunmetal or Silicium Bronze According to Din 50930-6 / Din EN 1982, Maintenance-free Selector Shaft, Black Powder-coated Actuating Lever Made of Metal, Epdm Sealing Element, Epdm Flat Seal.Technical Dataoperating Pressure Max. 1.6 Mpa (PN 16)Operating Temperature Max. 110 °Cwith Dvgw-test Markdn: 15, d: 18, G: 34

EUR 60.71
1

Viega Distributor Pipe 3/4" - 3 Gunmetal - Pex Systeme - 106027

Viega Distributor Pipe 3/4" - 3 Gunmetal - Pex Systeme - 106027

Flow-optimised Press Connector System For Drinking Water Installations in Acc. With Din 1988 And Din 50930-6 as Well as Heating Installations, Tested in Acc. With Dvgw Worksheet W 534.Press Connectorssafe And Fast Processing Without Calibration of The Pipe Ends Through O-ring-free Press Technology in All Dimensions. In This Way, Widening or Calibration of The Pipe-ends Becomes Superfluous And Reduces The Assembly Times. The Interaction Between Aerodynamic Radii And Minimal Cross-section Narrowings Ensure The Lowest Pressure Losses in Press Systems For Multilayer Pipes. This Allows a Smaller Dimensioning of Drinking Water Installations And Reduces The Pipeline Volume.Sc-conturall Sizes With Sc-contur - Connections, Which Remain Unpressed Become Visible When The System is Filled. The Sc-contur is Certified And Fulfils The Requirements of Dvgw Worksheet W 534, Point 12.14, Connectors With Forced Leakage.During Leakage Tests With Water, Viega Guarantees The Identification of Unpresse

EUR 45.41
1

Viega Distribution Pipe 3/4" - 2 Gunmetal - Pex Systeme - 104658

Viega Distribution Pipe 3/4" - 2 Gunmetal - Pex Systeme - 104658

Flow-optimised Press Connector System For Drinking Water Installations in Acc. With Din 1988 And Din 50930-6 as Well as Heating Installations, Tested in Acc. With Dvgw Worksheet W 534.Press Connectorssafe And Fast Processing Without Calibration of The Pipe Ends Through O-ring-free Press Technology in All Dimensions. In This Way, Widening or Calibration of The Pipe-ends Becomes Superfluous And Reduces The Assembly Times. The Interaction Between Aerodynamic Radii And Minimal Cross-section Narrowings Ensure The Lowest Pressure Losses in Press Systems For Multilayer Pipes. This Allows a Smaller Dimensioning of Drinking Water Installations And Reduces The Pipeline Volume.Sc-conturall Sizes With Sc-contur - Connections, Which Remain Unpressed Become Visible When The System is Filled. The Sc-contur is Certified And Fulfils The Requirements of Dvgw Worksheet W 534, Point 12.14, Connectors With Forced Leakage.During Leakage Tests With Water, Viega Guarantees The Identification of Unpresse

EUR 33.91
1

Viega Sanpress Inox XL Bend 90° 88.9 Stainless Steel/bright 482633 - Druckrohre Und Armaturen

Viega Sanpress Inox XL Bend 90° 88.9 Stainless Steel/bright 482633 - Druckrohre Und Armaturen

Press Connector System With Press Connectors And Pipes Made of Stainless Steel Material Nos. 1.4401 And 1.4521 in Acc. With Din EN 10088, Din EN 10312, Dvgw Worksheet GW 541, System Certification For Connectors And Pipes in Acc. With Dvgw Worksheet W 534, For Drinking Water Installations in Acc. With Din 1988. For Dimensionally Stable Concealed And Pre-wall Installations of Manifold And Riser Pipes in Viega Component Assembly.Press Connectorsall Sizes With Sc-contur - Connections, Which Remain Unpressed Become Visible When The System is Filled. The Sc-contur is Certified And Fulfils The Requirements of Dvgw Worksheet W 534, Point 12.14, Connectors With Forced Leakage.During Leakage Tests With Water, Viega Guarantees The Identification of Unpressed Connections in The Pressure Range 0.1 Mpa-0.65 Mpa, in The Case of a Dry Leakage Test With Compressed Air or Noble Gases From 22 Hpa-0.3 Mpa.Markinggreen Dot on The Press Connectionsealing Elementsepdm, Black (Ethylene-propylene-die

EUR 264.44
1

Viega Sanpress Inox XL Bend 45° 88.9 Stainless Steel/bright 482695 - Druckrohre Und Armaturen

Viega Sanpress Inox XL Bend 45° 88.9 Stainless Steel/bright 482695 - Druckrohre Und Armaturen

Press Connector System With Press Connectors And Pipes Made of Stainless Steel Material Nos. 1.4401 And 1.4521 in Acc. With Din EN 10088, Din EN 10312, Dvgw Worksheet GW 541, System Certification For Connectors And Pipes in Acc. With Dvgw Worksheet W 534, For Drinking Water Installations in Acc. With Din 1988. For Dimensionally Stable Concealed And Pre-wall Installations of Manifold And Riser Pipes in Viega Component Assembly.Press Connectorsall Sizes With Sc-contur - Connections, Which Remain Unpressed Become Visible When The System is Filled. The Sc-contur is Certified And Fulfils The Requirements of Dvgw Worksheet W 534, Point 12.14, Connectors With Forced Leakage.During Leakage Tests With Water, Viega Guarantees The Identification of Unpressed Connections in The Pressure Range 0.1 Mpa-0.65 Mpa, in The Case of a Dry Leakage Test With Compressed Air or Noble Gases From 22 Hpa-0.3 Mpa.Markinggreen Dot on The Press Connectionsealing Elementsepdm, Black (Ethylene-propylene-die

EUR 255.85
1

Viega Sanpress Inox Transition Fitting 42 x 1 1/2" Stainless Steel / Glossy - Druckrohre Und Armaturen - 438357

Viega Sanpress Inox Transition Fitting 42 x 1 1/2" Stainless Steel / Glossy - Druckrohre Und Armaturen - 438357

Press Connector System With Press Connectors And Pipes Made of Stainless Steel Material Nos. 1.4401 And 1.4521 in Acc. With Din EN 10088, Din EN 10312, Dvgw Worksheet GW 541, System Certification For Connectors And Pipes in Acc. With Dvgw Worksheet W 534, For Drinking Water Installations in Acc. With Din 1988. For Dimensionally Stable Concealed And Pre-wall Installations of Manifold And Riser Pipes in Viega Component Assembly.Press Connectorsall Sizes With Sc-contur - Connections, Which Remain Unpressed Become Visible When The System is Filled. The Sc-contur is Certified And Fulfils The Requirements of Dvgw Worksheet W 534, Point 12.14, Connectors With Forced Leakage.During Leakage Tests With Water, Viega Guarantees The Identification of Unpressed Connections in The Pressure Range 0.1 Mpa-0.65 Mpa, in The Case of a Dry Leakage Test With Compressed Air or Noble Gases From 22 Hpa-0.3 Mpa.Markinggreen Dot on The Press Connectionsealing Elementsepdm, Black (Ethylene-propylene-die

EUR 90.31
1

Viega Sanpress Overbending 18 Stainless Steel / Glossy - Druckrohre Und Armaturen - 289010

Viega Sanpress Overbending 18 Stainless Steel / Glossy - Druckrohre Und Armaturen - 289010

Press Connector System With Press Connectors And Pipes Made of Stainless Steel Material Nos. 1.4401 And 1.4521 in Acc. With Din EN 10088, Din EN 10312, Dvgw Worksheet GW 541, System Certification For Connectors And Pipes in Acc. With Dvgw Worksheet W 534, For Drinking Water Installations in Acc. With Din 1988. For Dimensionally Stable Concealed And Pre-wall Installations of Manifold And Riser Pipes in Viega Component Assembly.Press Connectorsall Sizes With Sc-contur - Connections, Which Remain Unpressed Become Visible When The System is Filled. The Sc-contur is Certified And Fulfils The Requirements of Dvgw Worksheet W 534, Point 12.14, Connectors With Forced Leakage.During Leakage Tests With Water, Viega Guarantees The Identification of Unpressed Connections in The Pressure Range 0.1 Mpa-0.65 Mpa, in The Case of a Dry Leakage Test With Compressed Air or Noble Gases From 22 Hpa-0.3 Mpa.Markinggreen Dot on The Press Connectionsealing Elementsepdm, Black (Ethylene-propylene-die

EUR 31.81
1

Viega Sanpress Inox Transition Fitting 54 x 2" Stainless Steel / Glossy - Druckrohre Und Armaturen - 438364

Viega Sanpress Inox Transition Fitting 54 x 2" Stainless Steel / Glossy - Druckrohre Und Armaturen - 438364

Press Connector System With Press Connectors And Pipes Made of Stainless Steel Material Nos. 1.4401 And 1.4521 in Acc. With Din EN 10088, Din EN 10312, Dvgw Worksheet GW 541, System Certification For Connectors And Pipes in Acc. With Dvgw Worksheet W 534, For Drinking Water Installations in Acc. With Din 1988. For Dimensionally Stable Concealed And Pre-wall Installations of Manifold And Riser Pipes in Viega Component Assembly.Press Connectorsall Sizes With Sc-contur - Connections, Which Remain Unpressed Become Visible When The System is Filled. The Sc-contur is Certified And Fulfils The Requirements of Dvgw Worksheet W 534, Point 12.14, Connectors With Forced Leakage.During Leakage Tests With Water, Viega Guarantees The Identification of Unpressed Connections in The Pressure Range 0.1 Mpa-0.65 Mpa, in The Case of a Dry Leakage Test With Compressed Air or Noble Gases From 22 Hpa-0.3 Mpa.Markinggreen Dot on The Press Connectionsealing Elementsepdm, Black (Ethylene-propylene-die

EUR 119.97
1

Viega Sanpress Inox Transition Fitting 28 x 1" Stainless Steel/bright 437534 - Druckrohre Und Armaturen

Viega Sanpress Inox Transition Fitting 28 x 1" Stainless Steel/bright 437534 - Druckrohre Und Armaturen

Press Connector System With Press Connectors And Pipes Made of Stainless Steel Material Nos. 1.4401 And 1.4521 in Acc. With Din EN 10088, Din EN 10312, Dvgw Worksheet GW 541, System Certification For Connectors And Pipes in Acc. With Dvgw Worksheet W 534, For Drinking Water Installations in Acc. With Din 1988. For Dimensionally Stable Concealed And Pre-wall Installations of Manifold And Riser Pipes in Viega Component Assembly.Press Connectorsall Sizes With Sc-contur - Connections, Which Remain Unpressed Become Visible When The System is Filled. The Sc-contur is Certified And Fulfils The Requirements of Dvgw Worksheet W 534, Point 12.14, Connectors With Forced Leakage.During Leakage Tests With Water, Viega Guarantees The Identification of Unpressed Connections in The Pressure Range 0.1 Mpa-0.65 Mpa, in The Case of a Dry Leakage Test With Compressed Air or Noble Gases From 22 Hpa-0.3 Mpa.Markinggreen Dot on The Press Connectionsealing Elementsepdm, Black (Ethylene-propylene-die

EUR 42.74
1