6 resultater (0,28129 sekunder)

Vis alle filtre

Mærke

Butik

Pris (EUR)

Nulstil filter

Produkter
Fra
Butikker

APC Performance SurgeArrest 8 outlets with Phone & Coax Protection 230V Germany

APC Performance SurgeArrest 8 outlets with Phone & Coax Protection 230V Germany

Protection working indicatorsurgearrest will warn you if its circuitry has been damaged by heavy strike or power line surge and it is unable to provide 100% protection. If still under warranty, apc will then replace your damaged surgearrest free of charge.ieee let-through ratings and regulatory agency complianceapc surge protectors undergo stringent testing by ieee, and are awarded "let-through ratings", which indicate the maximum voltage level that can possibly reach your equipment after a surge or voltage spike has passed through an electric surge protector. Lower ieee let-through ratings indicate better protection and performance. The apc essential surgearrest series offers optimal performance with a let-through rating of less than 330v for north american products, and a rating of less than 15% for products sold worldwide. All apc products comply with local agency safety requirements, including ul in north america and ce/kema/gost/c-tick/a-tick/telepermit in their respective regions.resettable circuit breakereasy recovery from overloads; no need to replace a fuse.right angle plugplug angle allows for equipment and furniture to be placed closer to the wall than with a standard power cord. Reduces cord stress too.emi and rfi noise filteringreduces line noise that can cause data loss and keyboard errors.data-line protectionprotection of data lines (ethernet, coaxial and phone lines) ensures complete protection of your equipment from surges. It is very important to protect your equipment from “back door” electric surges traveling through data lines, as they can be as damaging to your equipment as surges traveling over power lines.

EUR 80.90
1

APC Essential SurgeArrest PME1WU2B-GR -ylijännitesuoja, 2X USB-A, 230V, musta

APC Essential SurgeArrest PME1WU2B-GR -ylijännitesuoja, 2X USB-A, 230V, musta

Catastrophic event protectionsurgearrest components such as movs and thermal fuse ensure instantaneous reaction to lightning strikes and wiring faults. If the surge components are damaged due to power spike or over voltage, excess power cannot reach your equipment. Unlike the apc surgearrest products, most surge suppressors continue to let power through even after circuits have been damaged, leaving your equipment exposed to other damaging surges.protection working indicatorsurgearrest will warn you if its circuitry has been damaged by heavy strike or power line surge and it is unable to provide 100% protection. If still under warranty, apc will then replace your damaged surgearrest free of charge.ieee let-through ratings and regulatory agency complianceapc surge protectors undergo stringent testing by ieee, and are awarded "let-through ratings", which indicate the maximum voltage level that can possibly reach your equipment after a surge or voltage spike has passed through an electric surge protector. Lower ieee let-through ratings indicate better protection and performance. The apc essential surgearrest series offers optimal performance with a let-through rating of less than 330v to 500v for north american products, and a rating of less than 15% for products sold worldwide. All apc products comply with local agency safety requirements, including ul in north america and ce/kema/gost/c-tick/a-tick/telepermit in their respective regions.noise filteringattenuates emi/rfi line noise that can cause data errors and keyboard lockups, ensuring better performance of protected equipment.lightning and surge protectionto prevent damage to your equipment from electric power surges and spikes.protection working indicatorsurgearrest will warn you if its circuitry has been damaged by heavy strike or power line surge and it is unable to provide 100% protection. If still under warranty, apc will then replace your damaged surgearrest free of charge.building wiring fault indicatorthis led informs users of potentially dangerous wiring problems in the wall circuit.catastrophic event protectionsurgearrest components such as movs and thermal fuse ensure instantaneous reaction to lightning strikes and wiring faults. If the surge components are damaged due to power spike or over voltage, excess power cannot reach your equipment. Unlike the apc surgearrest products, most surge suppressors continue to let power through even after circuits have been damaged, leaving your equipment exposed to other damaging surges.fail safe modemost other surge suppressors continue to let power through even after their circuits have been damaged, leaving your equipment exposed to future surges. Apc's surgearrest fail safe, which means that once the circuit of an apc surgearrest has been compromised the unit disconnects equipment from the power supply ensuring that no damaging surges reach your equipment.fail safe modemost other surge suppressors continue to let power through even after their circuits have been damaged, leaving your equipment exposed to future surges. Apc's surgearrest fail safe, which means that once the circuit of an apc surgearrest has been compromised the unit disconnects equipment from the power supply ensuring that no damaging surges reach your equipment.resettable circuit breakereasy recovery from overloads; no need to replace a fuse. (not available on wall tap skus)protection working indicatorsurgearrest will warn you if its circuitry has been damaged by heavy strike or power line surge and it is unable to provide 100% protection. If still under warranty, apc will then replace your damaged surgearrest free of charge.lightning and surge protectionto prevent damage to your equipment from electric power surges and spikes.data-line protectionprotection of data lines (ethernet, coaxial and phone lines) ensures complete protection of your equipment from surges. It is very important to protect your equipment from “back door” electric surges traveling through data lines, as they can be as damaging to your equipment as surges traveling over power lines.

EUR 30.90
1

APC NetShelter SX Server Rack Gen 2 42U 1991H x 600W x 1200D mm w/ Sides Black

APC NetShelter SX Server Rack Gen 2 42U 1991H x 600W x 1200D mm w/ Sides Black

Product descriptionapc netshelter sx enclosures are built with the power, space and organizational features needed for versatile and demanding it environments. This 19-inch rack is optimized for high-density servers and networking applications. At 42u high, the enclosure fits easily through doorways and can support a static load of 4000 lbs.integrated with apc productsapc cooling, power distribution and cable management products seamlessly integrate into the enclosures to create a complete it infrastructure support system.optimized for high capacity cable management systemsnetshelter sx enclosures are specifically designed for use with high-capacity cable management systems that are mounted on mounting rails and are designed to fit the u-spaces for mounting equipment. The enclosures feature channels for routing and managing cables.cable access openings with pre-installed brusheslarge cable slots in the roof allow for overhead cable access. The bottom is specially designed for trouble-free cable passage via a raised floor. The roof is equipped with openings with brush strips pre-installed at locations that run diagonally towards the front of the cabinet for the passage of data cables and air management facilities.perforated front door with curved profilethe perforated front and rear doors (80%) ensure adequate ventilation of servers and network equipment. The perforated area of ​​the front door has been improved with a curved profile for a larger surface area, greater perforation coverage and a higher perforation percentage (80%). The front and rear doors open 270° (180° tracked) and thus keep aisles clear. The front doors are also equipped with three-point locking.quick release doorsthe door can be placed on the opposite side or interchanged with the rear doors. Doors are easy to remove with a simple "lift-off" design.half-height side panels and optional pass-through brush stripsthe half-height, easy-to-remove side panels are more compact and lighter, and provide quicker access to equipment. The side panels can be locked with a single key for the doors. Side panels with openings and brush strips are now available to route cables to adjacent racks in a row, while maintaining adequate airflow.easy-removal roof for cable accessthe roof can be easily removed via pin hinges for access during equipment installation and even after cables have been routed and routed through the cable openings. The roof can be reversed after removal to adjust the larger cable openings for power distribution plugs and connections.eyebolt support integrated into the cabinet framethe integrated eyebolt openings on the cabinet frame allow the cabinet to be lifted and moved using lifting equipment. See the cabinet owner's manual for more information on eyebolts and maximum cabinet weight.cabinet adjustment tools and hardware includedall cabinets come standard with a bag of hardware for mounting it equipment and tools for basic adjustments inside the cabinet.integrated electrical groundingthe roof and side panels and the front and rear doors are grounded to the enclosure frame. Eight additional electrical grounding connections for external grounding are located on the external frame.includes: baying hardware, doors, keys, keyed alike doors and side panels, leveling feet, mounting hardware, pre-installed casters, roof, side panels, unpacking instructionsintroducing the redesigned apc netshelter sx rack enclosure - trusted, versatile, and built for demanding it environments. With larger load capacities and more space for equipment, it enables higher-density computing. Choose from standard, wide, extra wide, and large-depth options. The modern look is perfect for colocation and customer-facing businesses. Simplify workflows with easy access to cabling and equipment, and optimize airflow and cable management with our wide range of apc accessories. The 270° (180° bayed) opening doors keep aisles clear, while 80% door perforation improves airflow for high-powered servers. Built sustainably with all-steel construction, it lasts for years and can be used for various applications. It also boasts a 3.3% decarbonization rate and ships in sturdy, recyclable packaging.

EUR 2452.90
1

APC NetShelter SX Server Rack Gen 2 42U 1991H x 750W x 1070D mm w/ Sides Black

APC NetShelter SX Server Rack Gen 2 42U 1991H x 750W x 1070D mm w/ Sides Black

Product descriptionapc netshelter sx gen2 enclosures are built with the power, space and organizational features needed for versatile and demanding it environments. This 19-inch rack is optimized for high-density servers and networking applications. At 42u high, the enclosure fits easily through doorways and can support a static load of 4000 lbs.integrated with apc productsapc cooling, power distribution and cable management products seamlessly integrate into the enclosures to create a complete it infrastructure support system.optimized for high capacity cable management systemsnetshelter sx enclosures are specifically designed for use with high-capacity cable management systems that are mounted on mounting rails and are designed to fit the u-spaces for mounting equipment. The enclosures feature channels for routing and managing cables.cable access openings with pre-installed brusheslarge cable slots in the roof allow for overhead cable access. The bottom is specially designed for trouble-free cable passage via a raised floor. The roof is equipped with openings with brush strips pre-installed at locations that run diagonally towards the front of the cabinet for the passage of data cables and air management facilities.perforated front door with curved profilethe perforated front and rear doors (80%) ensure adequate ventilation of servers and network equipment. The perforated area of ​​the front door has been improved with a curved profile for a larger surface area, greater perforation coverage and a higher perforation percentage (80%). The front and rear doors open 270° (180° tracked) and thus keep aisles clear. The front doors are also equipped with three-point locking.quick release doorsthe door can be placed on the opposite side or interchanged with the rear doors. Doors are easy to remove with a simple "lift-off" design.half-height side panels and optional pass-through brush stripsthe half-height, easy-to-remove side panels are more compact and lighter, and provide quicker access to equipment. The side panels can be locked with a single key for the doors. Side panels with openings and brush strips are now available to route cables to adjacent racks in a row, while maintaining adequate airflow.easy-removal roof for cable accessthe roof can be easily removed via pin hinges for access during equipment installation and even after cables have been routed and routed through the cable openings. The roof can be reversed after removal to adjust the larger cable openings for power distribution plugs and connections.eyebolt support integrated into the cabinet framethe integrated eyebolt openings on the cabinet frame allow the cabinet to be lifted and moved using lifting equipment. See the cabinet owner's manual for more information on eyebolts and maximum cabinet weight.cabinet adjustment tools and hardware includedall cabinets come standard with a bag of hardware for mounting it equipment and tools for basic adjustments inside the cabinet.integrated electrical groundingthe roof and side panels and the front and rear doors are grounded to the enclosure frame. Eight additional electrical grounding connections for external grounding are located on the external frame.includes: baying hardware, doors, keys, keyed alike doors and side panels, leveling feet, mounting hardware, pre-installed casters, roof, side panels, unpacking instructionsintroducing the redesigned apc netshelter sx rack enclosure - trusted, versatile, and built for demanding it environments. With larger load capacities and more space for equipment, it enables higher-density computing. Choose from standard, wide, extra wide, and large-depth options. The modern look is perfect for colocation and customer-facing businesses. Simplify workflows with easy access to cabling and equipment, and optimize airflow and cable management with our wide range of apc accessories. The 270° (180° bayed) opening doors keep aisles clear, while 80% door perforation improves airflow for high-powered servers. Built sustainably with all-steel construction, it lasts for years and can be used for various applications. It also boasts a 3.3% decarbonization rate and ships in sturdy, recyclable packaging.

EUR 2336.90
1

APC NetShelter SX Server Rack Gen 2 42U 1991H x 750W x 1200D mm w/ Sides Black

APC NetShelter SX Server Rack Gen 2 42U 1991H x 750W x 1200D mm w/ Sides Black

Product descriptionapc netshelter sx enclosures are built with the power, space and organizational features needed for versatile and demanding it environments. This 19-inch rack is optimized for high-density servers and networking applications. At 42u high, the enclosure fits easily through doorways and can support a static load of 4000 lbs.integrated with apc productsapc cooling, power distribution and cable management products seamlessly integrate into the enclosures to create a complete it infrastructure support system.optimized for high capacity cable management systemsnetshelter sx enclosures are specifically designed for use with high-capacity cable management systems that are mounted on mounting rails and are designed to fit the u-spaces for mounting equipment. The enclosures feature channels for routing and managing cables.cable access openings with pre-installed brusheslarge cable slots in the roof allow for overhead cable access. The bottom is specially designed for trouble-free cable passage via a raised floor. The roof is equipped with openings with brush strips pre-installed at locations that run diagonally towards the front of the cabinet for the passage of data cables and air management facilities.perforated front door with curved profilethe perforated front and rear doors (80%) ensure adequate ventilation of servers and network equipment. The perforated area of ​​the front door has been improved with a curved profile for a larger surface area, greater perforation coverage and a higher perforation percentage (80%). The front and rear doors open 270° (180° tracked) and thus keep aisles clear. The front doors are also equipped with three-point locking.quick release doorsthe door can be placed on the opposite side or interchanged with the rear doors. Doors are easy to remove with a simple "lift-off" design.half-height side panels and optional pass-through brush stripsthe half-height, easy-to-remove side panels are more compact and lighter, and provide quicker access to equipment. The side panels can be locked with a single key for the doors. Side panels with openings and brush strips are now available to route cables to adjacent racks in a row, while maintaining adequate airflow.easy-removal roof for cable accessthe roof can be easily removed via pin hinges for access during equipment installation and even after cables have been routed and routed through the cable openings. The roof can be reversed after removal to adjust the larger cable openings for power distribution plugs and connections.eyebolt support integrated into the cabinet framethe integrated eyebolt openings on the cabinet frame allow the cabinet to be lifted and moved using lifting equipment. See the cabinet owner's manual for more information on eyebolts and maximum cabinet weight.cabinet adjustment tools and hardware includedall cabinets come standard with a bag of hardware for mounting it equipment and tools for basic adjustments inside the cabinet.integrated electrical groundingthe roof and side panels and the front and rear doors are grounded to the enclosure frame. Eight additional electrical grounding connections for external grounding are located on the external frame.includes: baying hardware, doors, keys, keyed alike doors and side panels, leveling feet, mounting hardware, pre-installed casters, roof, side panels, unpacking instructionsintroducing the redesigned apc netshelter sx rack enclosure - trusted, versatile, and built for demanding it environments. With larger load capacities and more space for equipment, it enables higher-density computing. Choose from standard, wide, extra wide, and large-depth options. The modern look is perfect for colocation and customer-facing businesses. Simplify workflows with easy access to cabling and equipment, and optimize airflow and cable management with our wide range of apc accessories. The 270° (180° bayed) opening doors keep aisles clear, while 80% door perforation improves airflow for high-powered servers. Built sustainably with all-steel construction, it lasts for years and can be used for various applications. It also boasts a 3.3% decarbonization rate and ships in sturdy, recyclable packaging.

EUR 3140.90
1

APC NetShelter SX Server Rack Gen 2 42U 1991H x 600W x 1070D mm w/ Sides Black

APC NetShelter SX Server Rack Gen 2 42U 1991H x 600W x 1070D mm w/ Sides Black

Product descriptionapc netshelter sx gen2 enclosures are built with the power, space and organizational features needed for versatile and demanding it environments. This 19-inch rack is optimized for high-density servers and networking applications. At 42u high, the enclosure fits easily through doorways and can support a static load of 4000 lbs.integrated with apc productsapc cooling, power distribution and cable management products seamlessly integrate into the enclosures to create a complete it infrastructure support system.optimized for high capacity cable management systemsnetshelter sx enclosures are specifically designed for use with high-capacity cable management systems that are mounted on mounting rails and are designed to fit the u-spaces for mounting equipment. The enclosures feature channels for routing and managing cables.cable access openings with pre-installed brusheslarge cable slots in the roof allow for overhead cable access. The bottom is specially designed for trouble-free cable passage via a raised floor. The roof is equipped with openings with brush strips pre-installed at locations that run diagonally towards the front of the cabinet for the passage of data cables and air management facilities.perforated front door with curved profilethe perforated front and rear doors (80%) ensure adequate ventilation of servers and network equipment. The perforated area of ​​the front door has been improved with a curved profile for a larger surface area, greater perforation coverage and a higher perforation percentage (80%). The front and rear doors open 270° (180° tracked) and thus keep aisles clear. The front doors are also equipped with three-point locking.quick release doorsthe door can be placed on the opposite side or interchanged with the rear doors. Doors are easy to remove with a simple "lift-off" design.half-height side panels and optional pass-through brush stripsthe half-height, easy-to-remove side panels are more compact and lighter, and provide quicker access to equipment. The side panels can be locked with a single key for the doors. Side panels with openings and brush strips are now available to route cables to adjacent racks in a row, while maintaining adequate airflow.easy-removal roof for cable accessthe roof can be easily removed via pin hinges for access during equipment installation and even after cables have been routed and routed through the cable openings. The roof can be reversed after removal to adjust the larger cable openings for power distribution plugs and connections.eyebolt support integrated into the cabinet framethe integrated eyebolt openings on the cabinet frame allow the cabinet to be lifted and moved using lifting equipment. See the cabinet owner's manual for more information on eyebolts and maximum cabinet weight.cabinet adjustment tools and hardware includedall cabinets come standard with a bag of hardware for mounting it equipment and tools for basic adjustments inside the cabinet.integrated electrical groundingthe roof and side panels and the front and rear doors are grounded to the enclosure frame. Eight additional electrical grounding connections for external grounding are located on the external frame.includes: baying hardware, doors, keys, keyed alike doors and side panels, leveling feet, mounting hardware, pre-installed casters, roof, side panels, unpacking instructionsintroducing the redesigned apc netshelter sx rack enclosure - trusted, versatile, and built for demanding it environments. With larger load capacities and more space for equipment, it enables higher-density computing. Choose from standard, wide, extra wide, and large-depth options. The modern look is perfect for colocation and customer-facing businesses. Simplify workflows with easy access to cabling and equipment, and optimize airflow and cable management with our wide range of apc accessories. The 270° (180° bayed) opening doors keep aisles clear, while 80% door perforation improves airflow for high-powered servers. Built sustainably with all-steel construction, it lasts for years and can be used for various applications. It also boasts a 3.3% decarbonization rate and ships in sturdy, recyclable packaging.

EUR 1907.90
1