79 resultater (0,32123 sekunder)

Vis alle filtre

Mærke

Butik

Pris (EUR)

Nulstil filter

Produkter
Fra
Butikker

Brodit Aktiv Holder med fast installation til Zebra TC77, Zebra TC75, Zebra TC72 og Zebra TC70 - 713138

Brodit Aktiv Holder med fast installation til Zebra TC77, Zebra TC75, Zebra TC72 og Zebra TC70 - 713138

#html-body [data-pb-style=UXX74AU]{justify-content:flex-start;display:flex;flex-direction:column;background-position:left top;background-size:cover;background-repeat:no-repeat;background-attachment:scroll}Active holder for fixed installationFor all versions with pistol grip. With swiveling top support for an extra firm installation, with vibration dampeners.The choice for you who want to have you PDA firmly in place, properly attached and still within easy reach. The holder has a strong, robust design to withstand rough handling in professional use. The swiveling top part keeps your device extra securely in place in the holder, it "locks" the device in the holder so that it can not shake the least. It is easy to place the PDA in the holder, and to take it with you when leaving the vehicle. Attach onto a Pedestal Mount.Easy-switching system:The easy-switching system enables you to upgrade the holder only, and keep the installed cables. It saves you a lot of time! When upgrading to a new device, you do not longer need to make a full installation. Same goes for maintenance in case of warranty or damage. You simply disconnect the holder from the charging cable via the Molex 6-pin quick connector, and then connect the new holder. The switch is done in a few seconds.An active holder which is to be connected inside the dashboard, this gives a discreet, neat installation without cables hanging over the interior! You can choose to use the holder as an active holder for charging of your device only, or to connect an adapter to the Molex connector for additional features. Then you can use the holder also for power supply of a GPS receiver or other own solutions (can not be used for data communication or audio connection). 12/24 Volt. The product is E-approved. Connect the power cable with a 2 A fuse. 2 A charger. Professional installation recommended. Made of Acetal/ABS plastic. Color: Black. Made in Sweden.Fits the following modelsZebra TC77 Zebra TC75 Zebra TC72 Zebra TC70 

DKK 1619.00
1

Brodit Aktiv Holder med fast installation og kugleled til Panasonic FZ-T1 - 713106

Brodit Aktiv Holder med fast installation og kugleled til Panasonic FZ-T1 - 713106

#html-body [data-pb-style=Y1AIP5Q]{justify-content:flex-start;display:flex;flex-direction:column;background-position:left top;background-size:cover;background-repeat:no-repeat;background-attachment:scroll}Active holder for fixed installationWith swiveling top support for an extra firm installation. With tilt swivel. 2A charger.The choice for you who want to have you PDA firmly in place, properly attached and still within easy reach. The holder has a strong, robust design to withstand rough handling in professional use. The swiveling top part keeps your device extra securely in place in the holder, it "locks" the device in the holder so that it can not shake the least. It is easy to place the PDA in the holder, and to take it with you when leaving the vehicle. The holder is equipped with a tilt swivel so you can easily adjust the angle for good viewing. Attach onto a ProClip Mounting Platform or a Pedestal Mount.An active holder which is to be connected inside the dashboard, this gives a discreet, neat installation without cables hanging over the interior! You can choose to use the holder as an active holder for charging of your device only, or to connect an adapter to the Molex connector for additional features. Then you can use the holder also for power supply of a GPS receiver or other own solutions (can not be used for data communication or audio connection). 12/24 Volt. The product is E-approved. Connect the power cable with a 2 A fuse. 2 A charger. Professional installation recommended.Easy-switching system:The easy-switching system enables you to upgrade the holder only, and keep the installed cables. It saves you a lot of time! When upgrading to a new device, you do not longer need to make a full installation. Same goes for maintenance in case of warranty or damage. You simply disconnect the holder from the charging cable via the Molex 6-pin quick connector, and then connect the new holder. The switch is done in a few seconds.Fits the following modelsPanasonic FZ-T1 

DKK 1579.00
1

Brodit Aktiv Holder med lås+nøgler og kugleled til Samsung Galaxy Tab Active 2 SM-T390/SM-T395 - 736208

Brodit Aktiv Holder med lås+nøgler og kugleled til Samsung Galaxy Tab Active 2 SM-T390/SM-T395 - 736208

#html-body [data-pb-style=MBFQRIL]{justify-content:flex-start;display:flex;flex-direction:column;background-position:left top;background-size:cover;background-repeat:no-repeat;background-attachment:scroll}Holder with key-lockArt.736208Active for fixed installation. With easy-switch system and tilt swivel. With USB Host. Fits for devices with OtterBox uniVERSE case.  2 keys included.This holder is the perfect choice when you want to have your device securely locked in place and still easy accessible. Custom fit for device with OtterBox uniVERSE case. The holder has an extra robust design for an extra secure fit and is equipped with a lock. In order to remove the device from the holder you need a key (two keys are included). With USBG host port.The active holder for fixed installation is to be connected inside the dashboard. It provides a discreet and neat installation without any cables hanging over the interior. Safe and convenient! The holder is mounted onto a tilt swivel. This mean that you can adjust the angle in order to avoid light reflection on the screen. You can easily switch between portrait and landscape mode by turning the holder into desired position.Tilts 17° and swivels 360°. It is easy to put the device into place in the holder, and to take it with you when leaving the car. Mountingplate 42x50 mm with 4 mm AMPS-holes. Made of high grade black ABS/Acetal plastic. Color: black. Made in Sweden. The product is E-approved. Connect the power cable with a 2 A fuse. Professional installation recommended. 12/24 Volt. Attach the holder to any flat surface or a Pedestal Mount in a truck, distribution vehicle, warehouse etc.Easy-switching system:The easy-switching system enables you to upgrade the holder only, and keep the installed cables. It saves you a lot of time! When upgrading to a new device, you do not longer need to make a full installation. Same goes for maintenance in case of warranty or damage. You simply disconnect the holder from the charging cable via the Molex 6-pin quick connector, and then connect the new holder. The switch is done in a few seconds.Fits for:Samsung Galaxy Tab Active 2 SM-T390/SM-T395

DKK 1759.00
1

Brodit Aktiv Holder med lås/nøgler til Samsung Galaxy Tab Active 4 Pro SM-T630/SM-T636 - 735329

Brodit Aktiv Holder med lås/nøgler til Samsung Galaxy Tab Active 4 Pro SM-T630/SM-T636 - 735329

#html-body [data-pb-style=L339AGL]{justify-content:flex-start;display:flex;flex-direction:column;background-position:left top;background-size:cover;background-repeat:no-repeat;background-attachment:scroll}Holder with key-lockArt.735329Active holder with cig-plug. Fits for devices with original skin. 2 keys included. Module Upgrade Cradle. With Easy-switching system and USB Host.The holder is also perfect for use in stores, at exhibitions and any place where you want to use your Tab Active 4 Pro without having it easy removable. The holder is equipped with a lock. In order to remove the Tab Active 4 Pro from the holder you need the key, two keys are included.  The active holder guarantees a neewly charged battery at all times. 3 A charging. Charging via pogo plug. The holder is equipped with a USB-Host port so you can connect an accessory.The holder is mounted onto a tilt swivel. This mean that you can adjust the angle in order to avoid light reflection on the screen. You can easily switch between portrait and landscape mode by turning the holder into desired position.Easy-switching system:The easy-switching system enables you to upgrade the holder only, and keep the installed cables. It saves you a lot of time! When upgrading to a new device, you do not longer need to make a full installation. Same goes for maintenance in case of warranty or damage. You simply disconnect the holder from the charging cable via the Molex 6-pin quick connector, and then connect the new holder. The switch is done in a few seconds.This is a Module Upgrade Cradle, this means that you can upgrade or replace features by using some of the following modules:Item no. 216329 Spring stud lockChoose installation placement with care, devices must not be placed in positions where they may block the view or important controls. The cradle should only be attached onto a suitable place. Installations always take place at the customer's own discretion and responsibility.Fits for:Samsung Galaxy Tab Active 4 Pro SM-T630/SM-T636

DKK 1549.00
1

Brodit Faststrøms aktiv Terminal holder til Zebra MC9300/MC9400 -713134

Brodit Faststrøms aktiv Terminal holder til Zebra MC9300/MC9400 -713134

#html-body [data-pb-style=EC9REPA]{justify-content:flex-start;display:flex;flex-direction:column;background-position:left top;background-size:cover;background-repeat:no-repeat;background-attachment:scroll}Brodit Holder med indbygget opladning lavet specifikt til Zebra MC9300/MC9400.OBS: Denne model er UDEN Brodits kraftige kugleled.Holderen giver en kraftig 3A opladning og er udstyret med easy Switch system.Dette er en faststrøms monteret aktiv holder, hvilket vil sige at holderen har indbygget laderstik som går ned til en molexboks med løs ledning i den anden ende som så installeres med en 2A sikring bag bilens instrumentbord i bilens sikringsboks.Vi anbefaler professionel installation hos din lokale mekaniker ved tilslutning af faststrømsholder.Vi anbefaler at holderen monteres på en Brodit ProClip eller Brodits Piedestal mount serie for den sikreste montering. Se Brodit ProClips og bilbeslag lige her Se Brodit Piedestal Mounts lige her Model: 713134Passer til nedenstående Zebra modeller:Zebra MC9300, med pistolgreb Zebra MC9400, med pistolgreb EAN:7320287131345Lade specifikationer:Input voltage: DC/10-24VCharging voltage: DC/4.6-5.3VOutput current(Typ): 3.0A 

DKK 1599.00
1

Brodit Aktiv Holder med lås til Samsung Galaxy Tab Active 4 Pro SM-T630/SM-T636 - 747329

Brodit Aktiv Holder med lås til Samsung Galaxy Tab Active 4 Pro SM-T630/SM-T636 - 747329

#html-body [data-pb-style=FVYEKCG]{justify-content:flex-start;display:flex;flex-direction:column;background-position:left top;background-size:cover;background-repeat:no-repeat;background-attachment:scroll}Holder with spring-lockActive holder for fixed installation. Fits for devices with original skin. Module Upgrade Cradle. With Easy-switching system and USB Host.This holder is to be used when you want to have your Tab Active 4 Pro extra securely in place and still have it easy accessable. The is equipped with a spring stud locking device. The holder is mounted onto a tilt swivel. This mean that you can adjust the angle in order to avoid light reflection on the screen. You can easily switch between portrait and landscape mode by turning the holder into desired position. The holder is equipped with a USB-Host port so you can connect an accessory.The active holder is to be connected inside the dashboard. It provides a discreet and neat installation without any cables hanging over the interior. Safe and convenient! 12/24 Volt. The product is E-approved. Connect the power cable with a 2 A fuse. 2,7 A charger. Charging via pogo plug. Professional installation recommended.Easy-switching system:The easy-switching system enables you to upgrade the holder only, and keep the installed cables. It saves you a lot of time! When upgrading to a new device, you do not longer need to make a full installation. Same goes for maintenance in case of warranty or damage. You simply disconnect the holder from the charging cable via the Molex 6-pin quick connector, and then connect the new holder. The switch is done in a few seconds.This is a Module Upgrade Cradle, this means that you can upgrade or replace features by using some of the following modules:Item no. 216328 Key lockChoose installation placement with care, devices must not be placed in positions where they may block the view or important controls. The cradle should only be attached onto a suitable place. Installations always take place at the customer's own discretion and responsibility.Fits the following modelsSamsung Galaxy Tab Active 4 Pro SM-T630/SM-T636 

DKK 1609.00
1

Brodit Aktiv Holder med topstøtte til Zebra MC3300R RFID - 216198

Brodit Aktiv Holder med topstøtte til Zebra MC3300R RFID - 216198

#html-body [data-pb-style=S9LG1C4]{justify-content:flex-start;display:flex;flex-direction:column;background-position:left top;background-size:cover;background-repeat:no-repeat;background-attachment:scroll}Active holder for fixed installationArt.216198With swiveling top support for an extra firm installation. 2A charging. 12/24V. With Easy-switching system.An active holder which is to be connected inside the dashboard, this gives a discreet, neat installation without cables hanging over the interior! The choice for you who want to have you PDA firmly in place, properly attached and still within easy reach. The holder has a strong, robust design to withstand rough handling in professional use. The swiveling top part keeps your device extra securely in place in the holder, it "locks" the device in the holder so that it can not shake the least. It is easy to place the PDA in the holder, and to take it with you when leaving the vehicle. The charging device is automatically connected when you put the device in the holder.Easy-switching system:The easy-switching system enables you to upgrade the holder only, and keep the installed cables. It saves you a lot of time! When upgrading to a new device, you do not longer need to make a full installation. Same goes for maintenance in case of warranty or damage. You simply disconnect the holder from the charging cable via the Molex 6-pin quick connector, and then connect the new holder. The switch is done in a few seconds.Made of high grade black ABS/Acetal plastic. Made in Sweden. Attach onto a Pedestal Mount.Fits for:Zebra MC3300R RFID

DKK 1759.00
1

Brodit Aktiv Holder med cigaradaptor og topstøtte til Panasonic FZ-T1 - 712106

Brodit Aktiv Holder med cigaradaptor og topstøtte til Panasonic FZ-T1 - 712106

#html-body [data-pb-style=AA1XAR0]{justify-content:flex-start;display:flex;flex-direction:column;background-position:left top;background-size:cover;background-repeat:no-repeat;background-attachment:scroll}Active holder with cig-plugWith swiveling top support for an extra firm installation. With tilt swivel. 3A charger. 12/24 Volt.The choice for you who want to have you PDA firmly in place, properly attached and still within easy reach. The holder has a strong, robust design to withstand rough handling in professional use. The swiveling top part keeps your device extra securely in place in the holder, it "locks" the device in the holder so that it can not shake the least. It is easy to place the PDA in the holder, and to take it with you when leaving the vehicle. The holder is equipped with a tilt swivel so you can easily adjust the angle for good viewing. Attach onto a ProClip Mounting Platform or a Pedestal Mount. The charging device is automatically connected when you put the device in the holder. Connects to the vehicle's cigarette lighter socket, 12/24 Volt.Easy-switching system:The easy-switching system enables you to upgrade the holder only, and keep the installed cables. It saves you a lot of time! When upgrading to a new device, you do not longer need to make a full installation. Same goes for maintenance in case of warranty or damage. You simply disconnect the holder from the charging cable via the Molex 6-pin quick connector, and then connect the new holder. The switch is done in a few seconds.Fits the following modelsPanasonic FZ-T1

DKK 1579.00
1

Brodit Aktiv Holder m. USB-A Host til Honeywell EDA 10A - 712403

Brodit Aktiv Holder m. USB-A Host til Honeywell EDA 10A - 712403

#html-body [data-pb-style=S6UER27]{justify-content:flex-start;display:flex;flex-direction:column;background-position:left top;background-size:cover;background-repeat:no-repeat;background-attachment:scroll}Active holder with cig-plugFits devices with Protective Boot (EDA10A-RB-0) and Rotating Hand Strap (EDA10A-HS-1PK). With USB Host Type-A. With Easy-switching system. Charger via pogo pins. With AMPS, VESA 75.Use an active holder for your EDA10A and you will always have a freshly charged battery! The holder provides a neat and comfortable installation - safe and convenient. The holder is equipped with a cig-plug for connection to the vehicle's 12/24 Volt socket. 3A charging. Charging via pogo plug. The holder is equipped with a USB-Host port so you can connect an accessory.This holder is to be used when you want to have your EDA10A extra securely in place and still have it easy accessable.Easy-switching system:The easy-switching system enables you to upgrade the holder only, and keep the installed cables. It saves you a lot of time! When upgrading to a new device, you do not longer need to make a full installation. Same goes for maintenance in case of warranty or damage. You simply disconnect the holder from the charging cable via the Molex 6-pin quick connector, and then connect the new holder. The switch is done in a few seconds.Choose installation placement with care, devices must not be placed in positions where they may block the view or important controls. The cradle should only be attached onto a suitable place. Installations always take place at the customer's own discretion and responsibility.Fits the following modelsHoneywell EDA10A 

DKK 1869.00
1

Brodit Heavy Duty Tough Sleeve til Samsung Galaxy Tab E 8.0 - 559835

Brodit Heavy Duty Tough Sleeve til Samsung Galaxy Tab E 8.0 - 559835

#html-body [data-pb-style=EBVEO36]{justify-content:flex-start;display:flex;flex-direction:column;background-position:left top;background-size:cover;background-repeat:no-repeat;background-attachment:scroll}Heavy Duty Tough SleeveArt.559835With active MultiMoveClip, for fixed installation. 12/24V. With tilt swivel.The choice for you who use your device every day in a rough environment! Your device is well protected in a heavy duty tough sleeve, in the same time as it gets charged. You can easily take the device with you and move it between vehicle-vehicle or vehicle-office.First you place your device in the heavy duty tough sleeve, which is a robust case/jacket with built in bumpers. The bumpers reduce vibration and help protect the device if dropped. Then you attach the sleeve onto an active MultiMoveClip by pressing it downward onto the mount. When it snaps into place, the charging is automatically connected via the Sliding Power Block. Thanks to the quick connector, you also remove the sleeve from the MultiMoveClip in an instant. The charging connector is durable to withstand frequent wear in everyday professional use.The device is firmly in place in the sleeve and can not be removed without loosening the screws. You have full access to the camera and all buttons when the device is in the sleeve. For fixed installation. 12/24 V. The product is E-approved. Connect the power cable with a 2 A fuse. Professional installation recommended. Equipped with a tilt swivel so you can easily switch between portrait and landscape mode.  Made of black ABS- och Acetal plastic. Made in Sweden. Attach onto a Pedestal Mount or extra strength mounting platform.Sleeve Dimensions: 240 x 146 x 25 mm (W x H x D mm). Weight: 574 gMultiMoveClip with Sliding Power block for fixed installation: Builds 35 mm to the sleeve depth and 16 mm to the height.Fits for:Samsung Galaxy Tab E 8.0

DKK 1719.00
1

Brodit Heavy Duty Tough Sleeve til Samsung Galaxy Tab E 9.6 - 559821

Brodit Heavy Duty Tough Sleeve til Samsung Galaxy Tab E 9.6 - 559821

#html-body [data-pb-style=PCNCITM]{justify-content:flex-start;display:flex;flex-direction:column;background-position:left top;background-size:cover;background-repeat:no-repeat;background-attachment:scroll}Heavy Duty Tough SleeveArt.559821With active MultiMoveClip, for fixed installation. 12/24V. With tilt swivel.The choice for you who use your device every day in a rough environment! Your device is well protected in a heavy duty tough sleeve, in the same time as it gets charged. You can easily take the device with you and move it between vehicle-vehicle or vehicle-office.First you place your device in the heavy duty tough sleeve, which is a robust case/jacket with built in bumpers. The bumpers reduce vibration and help protect the device if dropped. Then you attach the sleeve onto an active MultiMoveClip by pressing it downward onto the mount. When it snaps into place, the charging is automatically connected via the Sliding Power Block. Thanks to the quick connector, you also remove the sleeve from the MultiMoveClip in an instant. The charging connector is durable to withstand frequent wear in everyday professional use.The device is firmly in place in the sleeve and can not be removed without loosening the screws. You have full access to the camera and all buttons when the device is in the sleeve. For fixed installation. 12/24 V. The product is E-approved. Connect the power cable with a 2 A fuse. Professional installation recommended. Equipped with a tilt swivel so you can easily switch between portrait and landscape mode.  Made of black ABS- och Acetal plastic. Made in Sweden. Attach onto a Pedestal Mount or extra strength mounting platform.Sleeve Dimensions: 270 x 170 x 26 mm (W x H x D mm).MultiMoveClip with Sliding Power block for fixed installation: Builds 35 mm to the sleeve depth.Fits for:Samsung Galaxy Tab E 9.6

DKK 1719.00
1

Brodit Aktiv Holder til Zebra ET45 10 og Zebra ET40 10 - 713319

Brodit Aktiv Holder til Zebra ET45 10 og Zebra ET40 10 - 713319

#html-body [data-pb-style=IN37I4F]{justify-content:flex-start;display:flex;flex-direction:column;background-position:left top;background-size:cover;background-repeat:no-repeat;background-attachment:scroll}Active holder for fixed installationArt.713319Fits devices without Rugged Boot / Exoskeleton. With AMPS, VESA 75 holes. Module Upgrade Cradle. With Easy-switching system.The Zebra ET4x series Module Upgrade Cradles from Brodit are designed to withstand frequent wear and tear in professional every day use, providing a more productive working day and better working environment with your device within sight and reach. Safe, efficient and convenient!Easy-switching system:The easy-switching system enables you to upgrade the holder only, and keep the installed cables. It saves you a lot of time! When upgrading to a new device, you do not longer need to make a full installation. Same goes for maintenance in case of warranty or damage. You simply disconnect the holder from the charging cable via the Molex 6-pin quick connector, and then connect the new holder. The switch is done in a few seconds.Attach the cradle onto any flat surface or Pedestal Mount in a forklift, truck, distribution vehicle, warehouse, table top etc. Backplate made of steel with 4 mm AMPS and 4 mm VESA 75 standard holes. Made of high grade ABS-, Acetal-plastic and metal. Color: Black. Made in Sweden.This is a Module Upgrade Cradle, this means that you can upgrade or replace features by using some of the following modules:Item no. 216313  Spring stud lockItem no. 216312  Key lockChoose installation placement with care, devices must not be placed in positions where they may block the view or important controls. The cradle should only be attached onto a suitable place. Installations always take place at the customer's own discretion and responsibility.Fits for:Zebra ET45 10Zebra ET40 10

DKK 1549.00
1

Brodit Aktiv Holder til Zebra ET45 10 og Zebra ET40 10 - 713320

Brodit Aktiv Holder til Zebra ET45 10 og Zebra ET40 10 - 713320

#html-body [data-pb-style=IDIN0FU]{justify-content:flex-start;display:flex;flex-direction:column;background-position:left top;background-size:cover;background-repeat:no-repeat;background-attachment:scroll}Active holder for fixed installationArt.713320Fits devices with Rugged Boot / Exoskeleton. With AMPS, VESA 75 holes. Module Upgrade Cradle. With Easy-switching system.The Zebra ET4x series Module Upgrade Cradles from Brodit are designed to withstand frequent wear and tear in professional every day use, providing a more productive working day and better working environment with your device within sight and reach. Safe, efficient and convenient!Easy-switching system:The easy-switching system enables you to upgrade the holder only, and keep the installed cables. It saves you a lot of time! When upgrading to a new device, you do not longer need to make a full installation. Same goes for maintenance in case of warranty or damage. You simply disconnect the holder from the charging cable via the Molex 6-pin quick connector, and then connect the new holder. The switch is done in a few seconds.Attach the cradle onto any flat surface or Pedestal Mount in a forklift, truck, distribution vehicle, warehouse, table top etc. Backplate made of steel with 4 mm AMPS and 4 mm VESA 75 standard holes. Made of high grade ABS-, Acetal-plastic and metal. Color: Black. Made in Sweden.This is a Module Upgrade Cradle, this means that you can upgrade or replace features by using some of the following modules:Item no. 216317  Spring stud lockItem no. 216316  Key lockChoose installation placement with care, devices must not be placed in positions where they may block the view or important controls. The cradle should only be attached onto a suitable place. Installations always take place at the customer's own discretion and responsibility.  Fits for:Zebra ET45 10Zebra ET40 10

DKK 1549.00
1

Brodit Heavy Duty Tough Sleeve med kugleled til Samsung Galaxy Tab A 9.7 - 558814

Brodit Heavy Duty Tough Sleeve med kugleled til Samsung Galaxy Tab A 9.7 - 558814

#html-body [data-pb-style=R36WPVG]{justify-content:flex-start;display:flex;flex-direction:column;background-position:left top;background-size:cover;background-repeat:no-repeat;background-attachment:scroll}Heavy Duty Tough SleeveArt.558814With active MultiMoveClip, with USB-cable with cig-plug adapter. 12/24V. With tilt swivel.The choice for you who use your device every day in a rough environment! Your device is well protected in a heavy duty tough sleeve, in the same time as it gets charged. You can easily take the device with you and move it between vehicle-vehicle or vehicle-office.First you place your device in the heavy duty tough sleeve, which is a robust case/jacket with built in bumpers. The bumpers reduce vibration and help protect the device if dropped. Then you attach the sleeve onto an active MultiMoveClip by pressing it downward onto the mount. When it snaps into place, the charging is automatically connected via the Sliding Power Block. Thanks to the quick connector, you also remove the sleeve from the MultiMoveClip in an instant. The charging connector is durable to withstand frequent wear in everyday professional use.The device is firmly in place in the sleeve and can not be removed without loosening the screws. You have full access to the camera and all buttons when the device is in the sleeve. With USB cable with cig-plug adapter. 12/24V. Equipped with a tilt swivel so you can easily switch between portrait and landscape mode.  Made of black ABS- och Acetal plastic. Made in Sweden. Attach onto a Pedestal Mount or extra strength mounting platform.Dimensions: 271 x 187 x 24 mm (W x H x D mm).MultiMoveClip with Sliding Power block with USB-cable with cig-plug adapter: Builds 35 mm to the sleeve depth.Cable length 102 cm + 58 mm cig-plug adapter. Weight 131 g.Fits for:Samsung Galaxy Tab A 9.7

DKK 1719.00
1

Brodit Heavy Duty Tough Sleeve til Samsung Galaxy Tab S2 9.7 SM-T810/SM-T813/SM-T815/SM-T819 - 559976

Brodit Heavy Duty Tough Sleeve til Samsung Galaxy Tab S2 9.7 SM-T810/SM-T813/SM-T815/SM-T819 - 559976

#html-body [data-pb-style=NIE1870]{justify-content:flex-start;display:flex;flex-direction:column;background-position:left top;background-size:cover;background-repeat:no-repeat;background-attachment:scroll}Heavy Duty Tough SleeveArt.559976With active MultiMoveClip, for fixed installation. 12/24V. With tilt swivel.The choice for you who use your device every day in a rough environment! Your device is well protected in a heavy duty tough sleeve, in the same time as it gets charged. You can easily take the device with you and move it between vehicle-vehicle or vehicle-office.First you place your device in the heavy duty tough sleeve, which is a robust case/jacket with built in bumpers. The bumpers reduce vibration and help protect the device if dropped. Then you attach the sleeve onto an active MultiMoveClip by pressing it downward onto the mount. When it snaps into place, the charging is automatically connected via the Sliding Power Block. Thanks to the quick connector, you also remove the sleeve from the MultiMoveClip in an instant. The charging connector is durable to withstand frequent wear in everyday professional use.The device is firmly in place in the sleeve and can not be removed without loosening the screws. You have full access to the camera and all buttons when the device is in the sleeve. For fixed installation. 12/24 V. The product is E-approved. Connect the power cable with a 2 A fuse. Professional installation recommended. Equipped with a tilt swivel so you can easily switch between portrait and landscape mode.  Made of black ABS- och Acetal plastic. Made in Sweden. Attach onto a Pedestal Mount or extra strength mounting platform.Dimensions: 265 x 190 x 20 mm (W x H x D mm).MultiMoveClip with Sliding Power block for fixed installation: Builds 35 mm to the sleeve depth.Fits for:Samsung Galaxy Tab S2 9.7 SM-T810/SM-T813/SM-T815/SM-T819

DKK 1719.00
1

Brodit Heavy Duty Tough Sleeve med kugleled til Samsung Galaxy Tab 4 7.0 SM-T235/Samsung Galaxy Tab 4 7.0 SM-T231/Samsung Galaxy Tab 4 7.0 SM-T230 -

Brodit Heavy Duty Tough Sleeve med kugleled til Samsung Galaxy Tab 4 7.0 SM-T235/Samsung Galaxy Tab 4 7.0 SM-T231/Samsung Galaxy Tab 4 7.0 SM-T230 -

#html-body [data-pb-style=BXWPGM9]{justify-content:flex-start;display:flex;flex-direction:column;background-position:left top;background-size:cover;background-repeat:no-repeat;background-attachment:scroll}Heavy Duty Tough SleeveArt.558801With active MultiMoveClip, with USB-cable with cig-plug adapter. 12/24V. With tilt swivel.The choice for you who use your device every day in a rough environment! Your device is well protected in a heavy duty tough sleeve, in the same time as it gets charged. You can easily take the device with you and move it between vehicle-vehicle or vehicle-office.First you place your device in the heavy duty tough sleeve, which is a robust case/jacket with built in bumpers. The bumpers reduce vibration and help protect the device if dropped. Then you attach the sleeve onto an active MultiMoveClip by pressing it downward onto the mount. When it snaps into place, the charging is automatically connected via the Sliding Power Block. Thanks to the quick connector, you also remove the sleeve from the MultiMoveClip in an instant. The charging connector is durable to withstand frequent wear in everyday professional use.The device is firmly in place in the sleeve and can not be removed without loosening the screws. You have full access to the camera and all buttons when the device is in the sleeve. With USB cable with cig-plug adapter. 12/24V. Equipped with a tilt swivel so you can easily switch between portrait and landscape mode.  Made of black ABS- och Acetal plastic. Made in Sweden. Attach onto a Pedestal Mount or extra strength mounting platform.Sleeve Dimensions: 215 x 129 x 26 mm (W x H x D mm). Weight: 452 gMultiMoveClip with Sliding Power block with USB-cable with cig-plug adapter: Builds 35 mm to the sleeve depth and 16 mm to the height. Cable length 102 cm + 58 mm cig-plug adapter. Weight 131 g.Fits for:Samsung Galaxy Tab 4 7.0 SM-T235Samsung Galaxy Tab 4 7.0 SM-T231Samsung Galaxy Tab 4 7.0 SM-T230

DKK 1719.00
1

Brodit Heavy Duty Tough Sleeve med kugleled til Samsung Galaxy Tab E 8.0 - 558835

Brodit Heavy Duty Tough Sleeve med kugleled til Samsung Galaxy Tab E 8.0 - 558835

#html-body [data-pb-style=X8CWQN9]{justify-content:flex-start;display:flex;flex-direction:column;background-position:left top;background-size:cover;background-repeat:no-repeat;background-attachment:scroll}Heavy Duty Tough SleeveArt.558835With active MultiMoveClip, with USB-cable with cig-plug adapter. 12/24V. With tilt swivel.  The choice for you who use your device every day in a rough environment! Your device is well protected in a heavy duty tough sleeve, in the same time as it gets charged. You can easily take the device with you and move it between vehicle-vehicle or vehicle-office.First you place your device in the heavy duty tough sleeve, which is a robust case/jacket with built in bumpers. The bumpers reduce vibration and help protect the device if dropped. Then you attach the sleeve onto an active MultiMoveClip by pressing it downward onto the mount. When it snaps into place, the charging is automatically connected via the Sliding Power Block. Thanks to the quick connector, you also remove the sleeve from the MultiMoveClip in an instant. The charging connector is durable to withstand frequent wear in everyday professional use.The device is firmly in place in the sleeve and can not be removed without loosening the screws. You have full access to the camera and all buttons when the device is in the sleeve. With USB cable with cig-plug adapter. 12/24V. Equipped with a tilt swivel so you can easily switch between portrait and landscape mode.  Made of black ABS- och Acetal plastic. Made in Sweden. Attach onto a Pedestal Mount or extra strength mounting platform.Sleeve Dimensions: 240 x 146 x 25 mm (W x H x D mm). Weight: 574 gMultiMoveClip with Sliding Power block with USB-cable with cig-plug adapter: Builds 35 mm to the sleeve depth and 16 mm to the height. Cable length 102 cm + 58 mm cig-plug adapter. Weight 131 g.Fits for:Samsung Galaxy Tab E 8.0

DKK 1719.00
1

Brodit Heavy Duty Tough Sleeve med kugleled til Samsung Galaxy Tab S2 9.7 SM-T810/SM-T813/SM-T815/SM-T819 - 558976

Brodit Heavy Duty Tough Sleeve med kugleled til Samsung Galaxy Tab S2 9.7 SM-T810/SM-T813/SM-T815/SM-T819 - 558976

#html-body [data-pb-style=DV7NYYC]{justify-content:flex-start;display:flex;flex-direction:column;background-position:left top;background-size:cover;background-repeat:no-repeat;background-attachment:scroll}Heavy Duty Tough SleeveArt.558976With active MultiMoveClip, with USB-cable with cig-plug adapter. 12/24V. With tilt swivel.  The choice for you who use your device every day in a rough environment! Your device is well protected in a heavy duty tough sleeve, in the same time as it gets charged. You can easily take the device with you and move it between vehicle-vehicle or vehicle-office.First you place your device in the heavy duty tough sleeve, which is a robust case/jacket with built in bumpers. The bumpers reduce vibration and help protect the device if dropped. Then you attach the sleeve onto an active MultiMoveClip by pressing it downward onto the mount. When it snaps into place, the charging is automatically connected via the Sliding Power Block. Thanks to the quick connector, you also remove the sleeve from the MultiMoveClip in an instant. The charging connector is durable to withstand frequent wear in everyday professional use.The device is firmly in place in the sleeve and can not be removed without loosening the screws. You have full access to the camera and all buttons when the device is in the sleeve. With USB cable with cig-plug adapter. 12/24V. Equipped with a tilt swivel so you can easily switch between portrait and landscape mode.  Made of black ABS- och Acetal plastic. Made in Sweden. Attach onto a Pedestal Mount or extra strength mounting platform.Sleeve Dimensions: 265 x 190 x 20 mm (W x H x D mm). Weight: 942 gMultiMoveClip with Sliding Power block with USB-cable with cig-plug adapter: Builds 35 mm to the sleeve depth and 16 mm to the height.Fits for:Samsung Galaxy Tab S2 9.7 SM-T810/SM-T813/SM-T815/SM-T819

DKK 1719.00
1

Brodit Aktiv Holder fast installation til Zebra MC9400/MC9300 - 713135

Brodit Aktiv Holder fast installation til Zebra MC9400/MC9300 - 713135

#html-body [data-pb-style=OCPLE7J]{justify-content:flex-start;display:flex;flex-direction:column;background-position:left top;background-size:cover;background-repeat:no-repeat;background-attachment:scroll}Brodit Aktiv Holder m. fast installation og topstøtte – Zebra MC9300/MC9400Model: 713135Professionel holderløsning til fast installation – med automatisk opladning og låsende topstøtte.Denne aktive holder til Zebra MC9300 og MC9400 (med pistolgreb) er designet til fast montering direkte bag instrumentbrættet, hvilket giver en diskret og permanent installation uden synlige kabler. Holderen tilsluttes 12/24V-systemet og giver automatisk opladning via 3A ladekredsløb, når enheden placeres i holderen.Den integrerede drejelige topstøtte låser enheden sikkert i holderen og eliminerer rystelser under kørsel – ideelt til professionel brug i krævende miljøer som logistik, servicekøretøjer og lagerdrift.Holderen benytter Brodit's Easy-switching system, som gør det muligt at udskifte selve holderen uden at ændre på kabelføringen. Perfekt ved udskiftning af enhed eller vedligeholdelse.Dette er en faststrøms aktiv holder, hvilket vil sige at holderen har indbygget laderstik som går ud i bunden af holderen med en ledning der er tilsluttet 12/24V med en 2A sikring der monteres inde bag instrumentbrættet. Molex boksen er udstyret med 2 USB-udgange – en Type C og en USB-A.Vi anbefaler professionel installation hos din lokale mekaniker på faststrøms bilholderne.Vi anbefaler at holderen monteres på en ProClip eller et 9-hulsbeslag for den sikreste montering. Ved montering med Brodit ProClip beslag skånes bilens interiør. Alternativt kan holderen monteres med skruer direkte på instrumentbrættet eller en anden type holder.Tekniske specifikationer:- Kompatibilitet: Zebra MC9300 og MC9400 (alle versioner med pistolgreb)- Strømforsyning: 12/24V (fast installation)- Opladning: 3A automatisk opladning- Topstøtte: Drejelig topdel for ekstra stabilitet- Easy-switching system: Molex 6-pin quick connector- Montering: Til Pedestal Mount eller ProClip (medfølger ikke)- Materiale: Slagfast ABS/Acetal plast- Farve: Sort- Produceret i: SverigeFordele:- Fast og professionel montering uden synlige kabler- Automatisk opladning ved indsætning af enhed- Stabil placering – ideel til hårde miljøer og mobil drift- Tidsbesparende udskiftning af holder via Easy-switch- Udviklet til daglig, intensiv erhvervsbrugAnvendelse:Anbefales til erhvervskøretøjer, servicevogne og lagerkøretøjer, hvor PDA'en skal være sikkert monteret, opladt og klar til brug hele arbejdsdagen.Passer til nedenstående modeller med pistolgreb:Zebra MC9300Zebra MC9400

DKK 2009.00
1

Brodit Aktiv Holder med lås+nøgler til Zebra ET45 10 og Zebra ET40 10 - 735320

Brodit Aktiv Holder med lås+nøgler til Zebra ET45 10 og Zebra ET40 10 - 735320

#html-body [data-pb-style=GTJDJY9]{justify-content:flex-start;display:flex;flex-direction:column;background-position:left top;background-size:cover;background-repeat:no-repeat;background-attachment:scroll}Holder with key-lockArt.735320Active holder with cig-plug. Fits devices with Rugged Boot / Exoskeleton. With AMPS, VESA 75 holes. Module Upgrade Cradle. With Easy-switching system.The Zebra ET4x series Module Upgrade Cradles from Brodit are designed to withstand frequent wear and tear in professional every day use, providing a more productive working day and better working environment with your device within sight and reach. Safe, efficient and convenient!This cradle is the perfect choice when you want to have your device sequrely locked in place while easy accessible. The key lock prevents the tablet from being removed by unauthorized personnel, in order to remove the device you will need a key (2 keys included).The cradle is customized with a perfect fit for. It has a robust design for use in a normal forklift environment. You have full access to the camera,scanner, buttons and ports while docked. Easy one-hand insertion and removal.Easy-switching system:The easy-switching system enables you to upgrade the holder only, and keep the installed cables. It saves you a lot of time! When upgrading to a new device, you do not longer need to make a full installation. Same goes for maintenance in case of warranty or damage. You simply disconnect the holder from the charging cable via the Molex 6-pin quick connector, and then connect the new holder. The switch is done in a few seconds.Attach the cradle onto any flat surface or Pedestal Mount in a forklift, truck, distribution vehicle, warehouse, table top etc. With 4 mm AMPS and 4 mm VESA 75 standard holes. Made of high grade ABS-, Acetal-plastic. Color: Black. Made in Sweden.This is a Module Upgrade Cradle, this means that you can upgrade or replace features by using some of the following modules:Item no. 216317 Spring stud lockChoose installation placement with care, devices must not be placed in positions where they may block the view or important controls. The cradle should only be attached onto a suitable place. Installations always take place at the customer's own discretion and responsibility.Fits for:Zebra ET45 10Zebra ET40 10

DKK 1829.00
1

Brodit Aktiv Holder med lås og nøgler til Zebra ET45 10 og Zebra ET40 10 - 736319

Brodit Aktiv Holder med lås og nøgler til Zebra ET45 10 og Zebra ET40 10 - 736319

#html-body [data-pb-style=PLMTBP5]{justify-content:flex-start;display:flex;flex-direction:column;background-position:left top;background-size:cover;background-repeat:no-repeat;background-attachment:scroll}Holder with key-lockArt.736319Active holder for fixed installation. Fits devices without Rugged Boot / Exoskeleton. With AMPS, VESA 75 holes. Module Upgrade Cradle. With Easy-switching system.The Zebra ET4x series Module Upgrade Cradles from Brodit are designed to withstand frequent wear and tear in professional every day use, providing a more productive working day and better working environment with your device within sight and reach. Safe, efficient and convenient!This cradle is the perfect choice when you want to have your device sequrely locked in place while easy accessible. The key lock prevents the tablet from being removed by unauthorized personnel, in order to remove the device you will need a key (2 keys included).The cradle is customized with a perfect fit for. It has a robust design for use in a normal forklift environment. You have full access to the camera,scanner, buttons and ports while docked. Easy one-hand insertion and removal.Easy-switching system:The easy-switching system enables you to upgrade the holder only, and keep the installed cables. It saves you a lot of time! When upgrading to a new device, you do not longer need to make a full installation. Same goes for maintenance in case of warranty or damage. You simply disconnect the holder from the charging cable via the Molex 6-pin quick connector, and then connect the new holder. The switch is done in a few seconds.Attach the cradle onto any flat surface or Pedestal Mount in a forklift, truck, distribution vehicle, warehouse, table top etc. With 4 mm AMPS and 4 mm VESA 75 standard holes. Made of high grade ABS-, Acetal-plastic. Color: Black. Made in Sweden.This is a Module Upgrade Cradle, this means that you can upgrade or replace features by using some of the following modules:Item no. 216313 Spring stud lockChoose installation placement with care, devices must not be placed in positions where they may block the view or important controls. The cradle should only be attached onto a suitable place. Installations always take place at the customer's own discretion and responsibility.Fits for:Zebra ET45 10Zebra ET40 10

DKK 1949.00
1

Brodit Aktiv Holder med cigarstik og lås til Zebra ET45 8 og Zebra ET40 8 - 746318

Brodit Aktiv Holder med cigarstik og lås til Zebra ET45 8 og Zebra ET40 8 - 746318

#html-body [data-pb-style=KRU4N07]{justify-content:flex-start;display:flex;flex-direction:column;background-position:left top;background-size:cover;background-repeat:no-repeat;background-attachment:scroll}Holder with spring-lockActive holder with cig-plug. Fits devices with Rugged Boot / Exoskeleton. With AMPS, VESA 75 holes. Module Upgrade Cradle. With Easy-switching system.The Zebra ET4x series Module Upgrade Cradles from Brodit are designed to withstand frequent wear and tear in professional every day use, providing a more productive working day and better working environment with your device within sight and reach. Safe, efficient and convenient!This cradle is the perfect choice when you want to have your device firmly in place while easy accessible. The spring lock keeps the tablet from moving forward.The cradle is customized with a perfect fit for devices. It has a robust design for use in a normal forklift environment. You have full access to the camera,scanner, buttons and ports while docked. Easy one-hand insertion and removal.Easy-switching system:The easy-switching system enables you to upgrade the holder only, and keep the installed cables. It saves you a lot of time! When upgrading to a new device, you do not longer need to make a full installation. Same goes for maintenance in case of warranty or damage. You simply disconnect the holder from the charging cable via the Molex 6-pin quick connector, and then connect the new holder. The switch is done in a few seconds.Attach the cradle onto any flat surface or Pedestal Mount in a forklift, truck, distribution vehicle, warehouse, table top etc. Backplate made of steel with 4 mm AMPS and 4 mm VESA 75 standard holes. Made of high grade ABS-, Acetal-plastic and metal. Color: Black. Made in Sweden.This is a Module Upgrade Cradle, this means that you can upgrade or replace features by using some of the following modules:Item no. 216316  Key lockChoose installation placement with care, devices must not be placed in positions where they may block the view or important controls. The cradle should only be attached onto a suitable place. Installations always take place at the customer's own discretion and responsibility.Fits the following modelsZebra ET45 8 Zebra ET40 8 

DKK 1709.00
1

Brodit Aktiv Holder med cigarstik og lås til Zebra ET45 10 og Zebra ET40 10 - 746320

Brodit Aktiv Holder med cigarstik og lås til Zebra ET45 10 og Zebra ET40 10 - 746320

#html-body [data-pb-style=BF6SH4V]{justify-content:flex-start;display:flex;flex-direction:column;background-position:left top;background-size:cover;background-repeat:no-repeat;background-attachment:scroll}Holder with spring-lockActive holder with cig-plug. Fits devices with Rugged Boot / Exoskeleton. With AMPS, VESA 75 holes. Module Upgrade Cradle. With Easy-switching system.The Zebra ET4x series Module Upgrade Cradles from Brodit are designed to withstand frequent wear and tear in professional every day use, providing a more productive working day and better working environment with your device within sight and reach. Safe, efficient and convenient!This cradle is the perfect choice when you want to have your device firmly in place while easy accessible. The spring lock keeps the tablet from moving forward.The cradle is customized with a perfect fit for devices. It has a robust design for use in a normal forklift environment. You have full access to the camera,scanner, buttons and ports while docked. Easy one-hand insertion and removal.Easy-switching system:The easy-switching system enables you to upgrade the holder only, and keep the installed cables. It saves you a lot of time! When upgrading to a new device, you do not longer need to make a full installation. Same goes for maintenance in case of warranty or damage. You simply disconnect the holder from the charging cable via the Molex 6-pin quick connector, and then connect the new holder. The switch is done in a few seconds.Attach the cradle onto any flat surface or Pedestal Mount in a forklift, truck, distribution vehicle, warehouse, table top etc. Backplate made of steel with 4 mm AMPS and 4 mm VESA 75 standard holes. Made of high grade ABS-, Acetal-plastic and metal. Color: Black. Made in Sweden.This is a Module Upgrade Cradle, this means that you can upgrade or replace features by using some of the following modules:Item no. 216316  Key lockChoose installation placement with care, devices must not be placed in positions where they may block the view or important controls. The cradle should only be attached onto a suitable place. Installations always take place at the customer's own discretion and responsibility.Fits the following modelsZebra ET45 10 Zebra ET40 10 

DKK 1729.00
1

Brodit Aktiv Holder med cigaradaptor til Zebra ET45 8 og Zebra ET40 8 - 712330

Brodit Aktiv Holder med cigaradaptor til Zebra ET45 8 og Zebra ET40 8 - 712330

#html-body [data-pb-style=U6FWNWU]{justify-content:flex-start;display:flex;flex-direction:column;background-position:left top;background-size:cover;background-repeat:no-repeat;background-attachment:scroll}Active holder with cig-plugArt.712330Fits devices with Rugged Boot / Exoskeleton, Zebra original expansion back. Module Upgrade Cradle. With Easy-switching system.The Zebra ET4x series Module Upgrade Cradles from Brodit are designed to withstand frequent wear and tear in professional every day use, providing a more productive working day and better working environment with your device within sight and reach. Safe, efficient and convenient!This cradle is the perfect choice when you want to have your device installed in place and easy accessible. The cradle is customized with a perfect fit for devices with or without any expansion back module/handstrap, Otterbox Utility series Latch handstrap. It has a robust design for use in a normal forklift environment. You have full access to the camera,scanner, buttons and ports while docked. Easy one-hand insertion and removal.Easy-switching system:The easy-switching system enables you to upgrade the holder only, and keep the installed cables. It saves you a lot of time! When upgrading to a new device, you do not longer need to make a full installation. Same goes for maintenance in case of warranty or damage. You simply disconnect the holder from the charging cable via the Molex 6-pin quick connector, and then connect the new holder. The switch is done in a few seconds.Attach the cradle onto any flat surface or Pedestal Mount in a forklift, truck, distribution vehicle, warehouse, table top etc. Backplate made of steel with 4 mm AMPS and 4 mm VESA 75 standard holes. Made of high grade ABS-, Acetal-plastic and metal. Color: Black. Made in Sweden.This is a Module Upgrade Cradle, this means that you can upgrade or replace features by using some of the following modules:Item no. 216346 Spring stud lockItem no. 216345 Key lockChoose installation placement with care, devices must not be placed in positions where they may block the view or important controls. The cradle should only be attached onto a suitable place. Installations always take place at the customer's own discretion and responsibility.  Fits for:Zebra ET45 8Zebra ET40 8

DKK 1709.00
1

Brodit Aktiv Holder med lås og nøgler til Zebra ET45 8 og Zebra ET40 8 - 736318

Brodit Aktiv Holder med lås og nøgler til Zebra ET45 8 og Zebra ET40 8 - 736318

#html-body [data-pb-style=WVT97B0]{justify-content:flex-start;display:flex;flex-direction:column;background-position:left top;background-size:cover;background-repeat:no-repeat;background-attachment:scroll}Holder with key-lockArt.736318Active holder for fixed installation. Fits devices with Rugged Boot / Exoskeleton. With AMPS, VESA 75 holes. Module Upgrade Cradle. With Easy-switching system.The Zebra ET4x series Module Upgrade Cradles from Brodit are designed to withstand frequent wear and tear in professional every day use, providing a more productive working day and better working environment with your device within sight and reach. Safe, efficient and convenient!This cradle is the perfect choice when you want to have your device sequrely locked in place while easy accessible. The key lock prevents the tablet from being removed by unauthorized personnel, in order to remove the device you will need a key (2 keys included).The cradle is customized with a perfect fit for. It has a robust design for use in a normal forklift environment. You have full access to the camera,scanner, buttons and ports while docked. Easy one-hand insertion and removal.Easy-switching system:The easy-switching system enables you to upgrade the holder only, and keep the installed cables. It saves you a lot of time! When upgrading to a new device, you do not longer need to make a full installation. Same goes for maintenance in case of warranty or damage. You simply disconnect the holder from the charging cable via the Molex 6-pin quick connector, and then connect the new holder. The switch is done in a few seconds.Attach the cradle onto any flat surface or Pedestal Mount in a forklift, truck, distribution vehicle, warehouse, table top etc. With 4 mm AMPS and 4 mm VESA 75 standard holes. Made of high grade ABS-, Acetal-plastic. Color: Black. Made in Sweden.This is a Module Upgrade Cradle, this means that you can upgrade or replace features by using some of the following modules:Item no. 216317 Spring stud lockChoose installation placement with care, devices must not be placed in positions where they may block the view or important controls. The cradle should only be attached onto a suitable place. Installations always take place at the customer's own discretion and responsibility.  Fits for:Zebra ET45 8Zebra ET40 8

DKK 1919.00
1