motor fedt fra DKK 1249 | Se de billigste priser og tilbud på css.lazzaweb.dk

Makulator - HP OneShred 12CC - P-4 - 12 ark - 23 liter - Hvid

Makulator - HP OneShred 12CC - P-4 - 12 ark - 23 liter - Hvid - Produkttype: Makulator - Mærke: HP - Model: OneShred 12CC - Sikkerhedsniveau: P-4 / DIN 66399 - Skæremetode: Partikelskæring / Cross cut - Partikelstørrelse: 4 x 35 mm - Skærekapacitet: 12 ark (80 g/m²) - Skærehastighed: 1,8 meter/minut - Materiale: Papir, kreditkort, papirclips, hæfteklammer - Driftstid: 6 minutter - Køletid: 50 minutter - Affaldsbeholder: 23 liter med vindue og aftageligt skærehoved - Indføringsbredde: 220 mm - Lydniveau: 65 dB - Indikatorer: Overophedning, overbelastning - Farve: Hvid - Dimensioner: 345 x 235 x 485 mm (B x D x H) - Vægt: 5,9 kg - Strømforsyning: 220-240 VAC, 50/60 Hz, 300 W - Motor: DC HP OneShred 12CC er en effektiv makulator til hjemmet eller kontoret. Den kan makulere op til 12 ark ad gangen i partikler på 4 x 35 mm, hvilket sikrer et højt sikkerhedsniveau (P-4). Den har en praktisk affaldsbeholder på 23 liter med et vindue, der gør det nemt at se, hvornår den skal tømmes. Makulatoren har indikatorer for overophedning og overbelastning samt en automatisk returfunktion, der reducerer risikoen for papirstop. Bemærk: Kan ikke makulere labels og etiketter med klæbemiddel, da limen kan sætte sig fast i klingerne.

DKK 1249.00

1

Makulator HP OneShred 10MC

In addition to ease of use, the HP OneShred 10MC features an automatic start-stop function, an overheat and overload indicator, and an automatic reverse function in case you accidentally feed more than 10 sheets at a time. If the practical helper has been in continuous use for 10 minutes, you should allow a cool down period so that it does not overheat. The HP OneShred 10MC is equipped with four castors so that it is readily mobile and can be used wherever it is needed. The viewing window on the waste bin, which has a capacity of 20 litres, means you can always see when the box needs emptying. Since it can be easily pulled out, emptying is quick and easy. In addition to the clippings collection bin, instruction manual and power cord, the HP OneShred 10MC also comes with a HP Shredder Oil Sheet for initial cleaning of the cutting unit. The cutting unit Cutting capacity: 10 sheets DIN A4 (80 g / m²) Type of cut: Micro cut / Micro cut Particle size: 2 mm x 15 mm Cutting speed: 1.6 metres per minute Material to be cut: paper, credit cards, paper clips and staples The security Security level: P-5 / DIN 66399 The device Application area: small office environment / doctors / law firms Operating time: 10 minutes Cooling time: 50 minutes Waste container: 20 litres pull-out with viewing window Feed width: 220 mm Operating noise: 65 dB Castors: 4, 2 of them lockable Colour: white The indicators Overheat indicator: yes Overload indicator: yes Anti-paper jam technology: through automatic return function Full and open bin indicator: no The operating conditions Voltage: 220 - 240 VAC Frequency: 50 / 60 Hz Power: 350 W / 1.8 A Motor type: DC The logistics Item number: 2804 EAN: 4030152028047 Device dimensions: 354 mm x 240 mm x 534 mm (width x depth x height) Device weight: 9.4 kg OBS. kan ikke makulere labels og etiketter med klæbemiddel, da limen sætter sig fast i klingerne.

DKK 1775.20

1

Makulator HP OneShred 15CC

With an operating noise level of 65 dB, the HP OneShred 15CC operates relatively quietly and scores further points with its intuitive operation and the practical overheating and overload indicator. The automatic start-stop function ensures that the shredder stops automatically after a shredding process if no further paper is fed. Paper clips, staples and credit cards are no problem for the reliable office shredder and do not have to be removed before shredding. The viewing window on the waste bin makes up for a lack of a technical fill level indicator, because you can always see when the box needs emptying. The comparatively large waste container with a capacity of 20 litres is easy to empty: simply pull the collection bin out of the shredder, empty and push back into the device until it audibly clicks into place. The scope of delivery of the reliable HP OneShred 15CC includes the waste bin for the cuttings, the operating instructions and the power cord as well as a HP Shredder Oil Sheetfor the first cleaning of the cutting unit. The cutting unit Cutting capacity: 15 sheets DIN A4 (80 g / m²) Type of cut: Particle cut / Cross cut Particle size: 4 mm x 35 mm Cutting speed: 1.8 metres per minute Material to be cut: paper, credit cards, paper clips and staples The security Security level: P-4 / DIN 66399 The device Application area: small office environment Operating time: 10 minutes Cooling time: 50 minutes Waste bin: 20 litres extractable with viewing window Feed width: 220 mm Operating noise: 65 dB Castors: 4, 2 of them lockable Colour: white The indicators Overheat indicator: yes Overload indicator: yes Anti-paper jam technology: through automatic return function Full and open bin indicator: no The operating conditions Voltage: 220 - 240 VAC Frequency: 50 / 60 Hz Power: 350 W / 1.8 A Motor type: DC The logistics Item number: 2803 EAN: 4030152028030 Device dimensions: 354 mm x 240 mm x 534 mm (width x depth x height) Device weight: 9.4 kg OBS. kan ikke makulere labels og etiketter med klæbemiddel, da limen sætter sig fast i klingerne.

DKK 1639.20

1

Makulator HP OneShred 12MC

If the HP OneShred 12MC is not used for a period of 30 minutes, it automatically switches to sleep mode status whereby the power consumption is reduced to less than 0.5 watts. A full waste bin indicator alerts you in good time as to when the bin needs emptying. The large waste bin with a capacity of 25 litres is simply pulled out of the device for emptying and then pushed back in again until the bin audibly clicks into place. The shredder, which can be operated intuitively, is equipped with four castors so that it can be used flexibly and can change its place of use without any problems. With an operating noise of 65 decibels, the HP OneShred 12MC shreds relatively quietly. If the shredder slows down over time and the noise level increases the cutting mechanism should be cleaned with suitable care products. To ensure you are readily prepared for this, the shredder already comes with a HP Shredder Oil Sheet. The cutting unit Cutting capacity: 12 sheets DIN A4 (80 g / m²) Type of cut: Micro cut / Micro cut Particle size: 2 mm x 15 mm Cutting speed: 1.6 metres per minute Material to be cut: Paper, credit cards, paper clips and staples The security Security level: P-5 / DIN 66399 The device Application area: Open-plan offices / Doctors / Law firms Operating time: 20 minutes Cooling time: 20 minutes Sleep mode: after 30 minutes, power consumption < 0.5 Watt Waste bin: 25 litres pull-out with viewing window Feed width: 220 mm Operating noise: 65 dB Castors: 4, 2 of them lockable Colour: white The indicators Overheat indicator: yes Overload indicator: yes Anti-paper jam technology: through automatic return function Full and open bin indicator: yes The operating conditions Voltage: 220 - 240 VAC Frequency: 50 / 60 Hz Power: 600 W / 2.0 A Motor type: DC The logistics Item number: 2806 EAN: 4030152028061 Device dimensions: 400 mm x 271.5 mm x 590 mm (width x depth x height) Device weight: 12.2 kg OBS. kan ikke makulere labels og etiketter med klæbemiddel, da limen sætter sig fast i klingerne.

DKK 2135.20

1

Makulator HP OneShred 18CC

In addition to the usual indicators, such as the overheat and overload indicators, the HP OneShred 18CC has a full or open bin indicator. This way you know exactly when to empty the pull-out waste bin with a capacity of 25 litres. Of course, the effective office shredder in white design also has an automatic function that returns the fed material in the event of a paper jam. A paper jam can occur, for example, if you accidentally feed more than the specified 18 sheets at a time. Fortunately, paper clips, staples and credit cards do not cause any difficulties for the hard-working office shredder and do not have to be sorted out before shredding. The HP OneShred 18CC operates relatively quietly with an operating noise of 65 dB. If the noise level is no longer as pleasantly quiet during operation or if shredding is no longer as fast as you are accustomed to then the shredding unit should be cleaned. To make sure you're prepared, the HP OneShred 18CC comes with a HP Shredder Oil Sheetin addition to the shred bin, power adapter, and user manual. The cutting unit Cutting capacity: 18 sheets DIN A4 (80 g / m²) Type of cut: Particle cut / Cross cut Particle size: 4 mm x 35 mm Cutting speed: 1.6 metres per minute Material to be cut: paper, credit cards, paper clips and staples The security Security level: P-4 / DIN 66399 The device Application area: Open plan office Operating time: 20 minutes Cooling time: 20 minutes Sleep mode: after 30 minutes, power consumption < 0.5 Watt Waste bin: 25 litres pull-out with viewing window Feed width: 220 mm Operating noise: 65 dB Castors: 4, 2 of them lockable Colour: white The indicators Overheat indicator: yes Overload indicator: yes Anti-paper jam technology: through automatic return function Full and open bin indicator: yes The operating conditions Voltage: 220 - 240 VAC Frequency: 50 / 60 Hz Power: 450 W / 2.0 A Motor type: DC The logistics Item number: 2805 EAN: 4030152028054 Device dimensions: 400 mm x 271.5 mm x 590 mm (width x depth x height) Device weight: 12.2 kg OBS. kan ikke makulere labels og etiketter med klæbemiddel, da limen sætter sig fast i klingerne.

DKK 2489.00

1

Makulator HP OneShred 24CC

The intuitive HP OneShred 24CC scores points not only for its quiet operating noise of less than 65 decibels, but also for its large 30 litre capacity pull-out collection bin. In order to move this imposing shredder around the office without any problems despite its impressive 20 kg, it is equipped with four casters, two of which are lockable. In addition to a whole stack of documents, paper clips, staples and credit cards do not cause any difficulties for this reliable office shredder. If the shredder has been in continuous use for over 30 minutes, it requires a cool-down period before it can be used for another 30 minutes. Of course, in addition to an overheat and overload indicator, the HP OneShred 24CC also has an automatic reverse function and alerts you to a full or open waste bin, removing the need to constantly monitor whether it needs emptying. In order to enjoy your HP OneShred 24CC for as long as possible, the cutting mechanism should be maintained at regular intervals. For this purpose, in addition to the collection bin, power cord and user manual the shredder also comes with a HP Shredder Oil Sheetfor the first cleaning. The cutting unit Cutting capacity: 24 sheets DIN A4 (80 g / m²) Type of cut: Particle cut / Cross cut Particle size: 4 mm x 35 mm Cutting speed: 1.6 metres per minute Material to be cut: paper, credit cards, paper clips and staples The security Security level: P-4 / DIN 66399 The device Application area: open-plan office Operating time: > 30 minutes Cooling time: 50 minutes Sleep mode: after 30 minutes, power consumption < 0.5 Watt Waste bin: 30 litres pull-out with viewing window Feed width: 220 mm Operating noise: < 65 dB Castors: 4, 2 of them lockable Colour: black / white The indicators Overheat indicator: yes Overload indicator: yes Anti-paper jam technology: through automatic return function Full and open bin indicator: yes The operating conditions Voltage: 220 - 240 VAC Frequency: 50 Hz Power: 680 W / 3.0 A Motor type: Induction The logistics Item number: 2807 EAN: 4030152028078 Device dimensions: 424.3 mm x 295 mm x 644.5 mm (width x depth x height) Device weight: 20.0 kg OBS. kan ikke makulere labels og etiketter med klæbemiddel, da limen sætter sig fast i klingerne.

DKK 2919.20

1

Makulator HP Pro Shredder 12MC

The convenient HP Pro Shredder 12MC comes on castors, is intuitive to use and operates with an exceptionally quiet operating noise of only 55 decibels. The pull-out shred bin has a capacity of 25 litres, a viewing window and is easy to empty. This modern paper shredder automatically switches to sleep mode after 30 minutes and the power consumption drops to less than 0.5 watts. In addition to an indicator for an open and full waste bin, the paper shredder naturally has an overheating and overload indicator and an automatic start-stop function. Thanks to the anti-paper jam technology, the powerful assistant stops the shredding process whenever you try to shred more than 12 sheets at a time and feeds the paper back. Fortunately, credit cards, paper clips or staples cause no problems for the shredder and do not have to be laboriously separated before shredding. The HP Pro Shredder 12MCshould regularly be cleaned of dust and paper residues to optimize performance and satisfaction. With the right care and cleaning of the shredding unit you will achieve a good long-term cutting result, extend the running time and maintain a pleasantly quiet operating noise. A HP Shredder Oil Sheetis included in delivery for this purpose. The cutting unit Cutting capacity: 12 sheets DIN A4 (80 g / m²) Type of cut: Micro cut / Micro cut Particle size: 2 mm x 15 mm Cutting speed: 1.6 metres per minute Material to be cut: Paper, credit cards, paper clips and staples The security Security level: P-5 / DIN 66399 The device Application area: small office environment, doctors, law firms Operating time: 30 minutes Cooling time: 50 minutes Sleep mode: after 30 minutes, power consumption < 0.5 Watt Waste bin: 25 litres pull-out with viewing window Feed width: 220 mm Operating noise: 55 dB Castors: 4, 2 of them lockable Colour: black The indicators Overheat indicator: yes Overload indicator: yes Anti-paper jam technology: through automatic return function Full and open bin indicator: yes The operating conditions Voltage: 220 - 240 VAC Frequency: 50 Hz - Power: 600 W / 2.5 A Motor type: Induction The logistics Item number: 2814 EAN: 4030152028146 Device dimensions: 400 mm x 271.5 mm x 592 mm (width x depth x height) Device weight: 14.3 kg OBS. kan ikke makulere labels og etiketter med klæbemiddel, da limen sætter sig fast i klingerne.

DKK 3199.00

1

Makulator HP Pro Shredder 24CC

The HP Pro Shredder 24CC, like all of its HP Pro Series counterparts, is intuitive to use and features an overheat and overload indicator as well as an automatic start-stop feature that ensures the shredder stops when you stop feeding material. The large waste bin has a capacity of 30 litres and can be pulled out for easy content removal. The high-quality shredder has an indicator for an open as well as full bin and alerts you as soon as the waste bin needs emptying. The auto-reverse feature prevents paper jams by stopping the shredding process and returning the paper if you accidentally feed more than 24 sheets at a time. If the reliable document shredder is not used for 30 minutes, it automatically switches to sleep mode and the power consumption is reduced to less than 0.5 watts. Credit cards, paper clips and staples do not need to be laboriously sorted before shredding whole stacks of documents. The HP Pro Shredder 24CCshould be cleaned and maintained regularly to achieve a consistently good cutting result. To remove dust and paper residues from your shredder, a HP Shredder Oil Sheetis already included in delivery. The cutting unit Cutting capacity: 24 sheets DIN A4 (80 g / m²) Type of cut: Particle cut / Cross cut Particle size: 4 mm x 35 mm Cutting speed: 1.6 metres per minute Material to be cut: paper, credit cards, paper clips and staples The security Security level: P-4 / DIN 66399 The device Application area: Open plan office Operating time: 40 minutes Cooling time: 50 minutes Sleep mode: after 30 minutes, power consumption < 0.5 Watt Waste bin: 30 litre pull-out with viewing window Feed width: 220 mm Operating noise: 55 dB Castors: 4, 2 of them lockable Colour: black The indicators Overheat indicator: yes Overload indicator: yes Anti-paper jam technology: through automatic return function Full and open bin indicator: yes The operating conditions Voltage: 220 - 240 VAC Frequency: 50 Hz Power: 680 W / 3.0 A Motor type: Induction The logistics Item number: 2815 EAN: 4030152028153 Device dimensions: 424.3 mm x 295 mm x 644.5 mm (width x depth x height) Device weight: 20 kg OBS. kan ikke makulere labels og etiketter med klæbemiddel, da limen sætter sig fast i klingerne.

DKK 4089.00

1

Makulator HP Pro Shredder 16MC

The HP Pro Shredder 16MC boasts a particularly long operating time of 40 minutes before it requires a cool down period. The generous waste bin for the shredded material has a filling capacity of 30 litres and is easy to remove for emptying. An LED indicates when the waste bin needs to be emptied or the box has not been inserted properly. Of course, the intuitive shredder has anti-paper jam technology that stops the shredding process and feeds the paper back if you attempt to shred more than 16 sheets at a time. In addition to the overheat and overload indicator, the modern shredder scores with an automatic start-stop function that ensures that the device stops as soon as you do not feed any more material. Have you forgotten to switch off your hard-working helper? No problem, because the office shredder automatically switches to sleep mode after 30 minutes and the power consumption drops to less than 0.5 watts. Credit cards, paper clips and staples are not an issue for this high-quality office shredder and do not have to be laboriously separated before shredding. The regular removal of dust and paper debris will ensure your HP Pro Shredder 16MChas a long running time and a permanently low operating noise. To clean and maintain the shredder correctly from the start, a HP Shredder Oil Sheetis included in delivery. The cutting unit Cutting capacity: 16 sheets DIN A4 (80 g / m²) Type of cut: Micro cut / Micro cut Particle size: 2 mm x 15 mm Cutting speed: 1.6 metres per minute Material to be cut: Paper, credit cards, paper clips and staples The security Security level: P-5 / DIN 66399 The device Area of application: open-plan offices, doctors, law firms Operating time: 40 minutes Cooling time: 50 minutes Sleep mode: after 30 minutes, power consumption < 0.5 Watt Waste bin: 30 litres pull-out with viewing window Feed width: 220 mm Operating noise: 55 dB Castors: 4, 2 of them lockable Colour: black The indicators Overheat indicator: yes Overload indicator: yes Anti-paper jam technology: through automatic return function Full and open bin indicator: yes The operating conditions Voltage: 220 - 240 VAC Frequency: 50 Hz Power: 680 W / 3.0 A Motor type: Induction The logistics Item number: 2816 EAN: 4030152028160 Device dimensions: 424.3 mm x 295 mm x 644.5 mm (width x depth x height) Device weight: 18.2 kg OBS. kan ikke makulere labels og etiketter med klæbemiddel, da limen sætter sig fast i klingerne.

DKK 3559.20

1

Awardvindende Google Marketing Powerhouse

Mærke

Butik

Pris (EUR)