macbook air fra EUR 50 | Se de billigste priser og tilbud på css.lazzaweb.dk

Kolink Observatory Lite ARGB -midi-tornikotelo, musta

Combining performance and affordability, the kolink observatory lite midi-tower is a perfect mix of features and functionality. With no less than 4 argb led 120mm fans included as standard, controlled with a supplied remote which allows a variety of modes, lighting options and even speed control, the observatory lite also provides a stylish tempered glass front panel with ample side ventilation. The hardware you choose to install is also key; the tempered glass side panel allows you to create a showstopping system build. All in all the observatory lite is an extremely strong chassis with plenty to offer.kolink observatory lite: form and function in abundancethe digitally addressable rgb-led fans, 4 of which are preinstalled, are controlled by the supplied remote & rgb hub. Alternatively, the fans can be hooked up and controlled using a compatible motherboard thanks to its use of a standard 3-pin (5vdg) connector. The tempered glass side panel allows users to enjoy a panoramic view of the lighting used inside the kolink observatory lite.aside from the pre-installed fans, users are also free to install two more 120mm fans in the roof. This is where a magnetic dust filter can be found installed on the honeycomb-style mesh. The side-facing air inlets on the front and in the psu shroud also contribute to the good airflow of the case. Users are also free to install a 280 mm radiator in the front.the kolink observatory lite: hardware focussedthe interior comes entirely in black, with a psu shroud that only adds to the sleek and unobtrusive look. Behind the shroud is where users will find space for a pair of 3.5“ hdd's in the hdd cage provided, which also has anti-vibration mountings. Alternatively, 2.5“ ssd's can be installed here, or next to the motherboard. The motherboard tray and psu shroud both offer numerous openings for optimum cable management, with up to 30mm cable management space. Underneath the case is a removable dust filter appropriate to an atx-form factor psu, which can itself be up to 18 cm in length.graphics cards can be up to 33.5cm long (31cm if mounting an aio) and cpu coolers up to 16 cm tall. Additionally, the i/o panel located at the front possesses two usb 2.0 ports as well as an usb 3.0 type-a port.

EUR 62.00

1

Kolink Inspire K7 ARGB - miditornikotelo, Musta

Inspire k7 argbfrom the popular 'inspire' range comes the next entry into the series - the k7 argb midi-tower. With an attractive front panel design featuring an angled argb strip, carbon fiber effect finish and mesh ventilation, the inspire k7 argb midi-tower is another excellent addition to the price/performance sector.the features of the kolink inspire k7 argb at a glance carbon fiber effect front panel with an angled argb strip & mesh ventilation pre-installed rear 120mm fan with digitally addressable rgb lighting option to sync to motherboard software provided as standard tempered glass side panel for unobstructed view of the interior designed for atx/micro-atx-/mini-itx motherboards support for radiators up to 280mm in the front i/o panel with 1x usb 3.0 & 2x usb 2.0, hd audio & rgb button graphics cards up to 335 mm supported, cpu coolers up to 160 mm, psus up to 180 mm kolink inspire k7: covering all basesthe kolink inspire k7 features an angled front argb strip, along with a rear 120mm argb fan, controlled by the i/o panel rgb button or via connection to your motherboards 3-pin 5vdg connector and using the applicable software. The front panel also features both a carbon fiber effect finish, alongside vented air inlets for good airflow. Users are also free to install up to a 280 mm radiator in the front.aside from the pre-installed fan, users are also free to install three 120mm fans on the front panel, plus two more 120mm fans in the roof. A full tempered glass side panel shows off your system build in style.the kolink inspire k7: ready for your hardwarethe interior comes entirely in black, with a psu shroud that only adds to the sleek and unobtrusive look. Behind the shroud is where users will find space for a pair of 3.5" hdd's, using a 'drop and lock' system to secure. Alternatively, 2.5" ssd's can be installed here, or directly on top of the psu shroud. The motherboard tray and psu shroud both offer numerous openings for optimum cable management, with up to 30mm cable management space. Underneath the case is a removable dust filter suitable for an atx psu up to 180mm.graphics cards can be up to 33.5cm long (31cm if mounting a front aio) and cpu coolers up to 16 cm tall. Additionally, the i/o panel located at the front possesses two usb 2.0 ports as well as a usb 3.0 type-a port.

EUR 49.90

1

Kolink KL-R1200FG PSU. Gen5. Gold - 1200W -virtalähde, ATX 3.0, 600W 12VHPWR, musta

Regulator 80 plus gold seriesthe regulator series from kolink offers a comprehensive set of modern features to enhance any system. With high-quality premium components and an efficient 80-plus-gold certified design, regulator delivers a reliable supply of power, while the fluid dynamic bearing fan provides whisper-quiet cooling. Thanks to its compact design, complex protection features, and a switchable semi-fanless mode, the fully modular regulator series stands for flexibility, reliability, and performance. The kolink regulator atx3.0 psu features: atx 3.0 / pcie 5.0 compatible with 12vhpwr 600w connector. Switchable semi-fanless mode 100% japanese capacitors super quiet 120mm fdb fan impressive compact design with 14cm depth extensive safety functions (ovp, uvp, opp, scp, ocp, otp, sip) detailed descriptionatx 3.0 ready with 12vhpwr 600w connector the regulator series uses an llc + dc/dc single-rail design with full atx 3.0 and pcie 5.0 compatibility, to supply modern graphics cards with up to 600w via the 12vhpwr connector. To negate the need for additional adapters, a 12vhpwr 600w cable with awg16 is provided switchable semi-fanless modethe regulator series has a dedicated semi-fanless mode, which you can easily activate thanks to the switch next to the power button. This mode passively cools the power supply, when operating at up to 40%, for whisper-quiet performance at low or medium loads. At higher loads, the fan starts at low speed and is then regulated according to temperature, supporting cooling. Protecting the power supply from heat build-up, the fan switches on automatically when the temperature becomes too high. When semi-fanless mode is disabled, the fan continues to run at a low speed even under light load. 100% japanese capacitorsto ensure excellent performance and reliability, the regulator series utilises premium japanese capacitors. Super-quiet fdb fan the 120mm fan is equipped with a fluid dynamic bearing (fdb), enhancing longevity and durability. The blades have an optimized curve design, to draw in air more efficiently and quietly. The wide 8mm spacing between fan grill and the fan blades guarantees low influx turbulence and better airflow performance while lowering noise. Stable voltages with low rippleensuring great stability and enhanced longevity, the regulator series offers clean supply and tight voltage regulation over the entire load range. Strikingly compact designa carefully curated circuit board layout allows for a housing only 15cm deep. As a result, the regulator series fits into a wide range of systems, guaranteeing quick and easy installation even when space is limited. Extensive protective functionsextensive safety functions have been implemented to ensure the safety of the power supply unit and the connected components. The regulator series offers a 7-fold protection circuit with overvoltage protection (ovp), undervoltage protection (uvp), overpower protection (opp), short-circuit protection (scp), overcurrent protection (ocp), overtemperature protection (otp), and surge / inrush current protection (sip).

EUR 164.90

1

Kolink KL-R850FG PSU. Gen5. Gold - 850W -virtalähde, ATX 3.0, 600W 12VHPWR, musta

Regulator 80 plus gold seriesthe regulator series from kolink offers a comprehensive set of modern features to enhance any system. With high-quality premium components and an efficient 80-plus-gold certified design, regulator delivers a reliable supply of power, while the fluid dynamic bearing fan provides whisper-quiet cooling. Thanks to its compact design, complex protection features, and a switchable semi-fanless mode, the fully modular regulator series stands for flexibility, reliability, and performance. The kolink regulator atx3.0 psu features: atx 3.0 / pcie 5.0 compatible with 12vhpwr 600w connector. Switchable semi-fanless mode 100% japanese capacitors super quiet 120mm fdb fan impressive compact design with 14cm depth extensive safety functions (ovp, uvp, opp, scp, ocp, otp, sip) detailed descriptionatx 3.0 ready with 12vhpwr 600w connector the regulator series uses an llc + dc/dc single-rail design with full atx 3.0 and pcie 5.0 compatibility, to supply modern graphics cards with up to 600w via the 12vhpwr connector. To negate the need for additional adapters, a 12vhpwr 600w cable with awg16 is provided switchable semi-fanless modethe regulator series has a dedicated semi-fanless mode, which you can easily activate thanks to the switch next to the power button. This mode passively cools the power supply, when operating at up to 40%, for whisper-quiet performance at low or medium loads. At higher loads, the fan starts at low speed and is then regulated according to temperature, supporting cooling. Protecting the power supply from heat build-up, the fan switches on automatically when the temperature becomes too high. When semi-fanless mode is disabled, the fan continues to run at a low speed even under light load. 100% japanese capacitorsto ensure excellent performance and reliability, the regulator series utilises premium japanese capacitors. Super-quiet fdb fan the 120mm fan is equipped with a fluid dynamic bearing (fdb), enhancing longevity and durability. The blades have an optimized curve design, to draw in air more efficiently and quietly. The wide 8mm spacing between fan grill and the fan blades guarantees low influx turbulence and better airflow performance while lowering noise. Stable voltages with low rippleensuring great stability and enhanced longevity, the regulator series offers clean supply and tight voltage regulation over the entire load range. Strikingly compact designa carefully curated circuit board layout allows for a housing only 15cm deep. As a result, the regulator series fits into a wide range of systems, guaranteeing quick and easy installation even when space is limited. Extensive protective functionsextensive safety functions have been implemented to ensure the safety of the power supply unit and the connected components. The regulator series offers a 7-fold protection circuit with overvoltage protection (ovp), undervoltage protection (uvp), overpower protection (opp), short-circuit protection (scp), overcurrent protection (ocp), overtemperature protection (otp), and surge / inrush current protection (sip).

EUR 119.90

1

Kolink KL-R750FG PSU. Gen5. Gold - 750W -virtalähde, ATX 3.0, 600W 12VHPWR, musta

Regulator 80 plus gold seriesthe regulator series from kolink offers a comprehensive set of modern features to enhance any system. With high-quality premium components and an efficient 80-plus-gold certified design, regulator delivers a reliable supply of power, while the fluid dynamic bearing fan provides whisper-quiet cooling. Thanks to its compact design, complex protection features, and a switchable semi-fanless mode, the fully modular regulator series stands for flexibility, reliability, and performance. The kolink regulator atx3.0 psu features: atx 3.0 / pcie 5.0 compatible with 12vhpwr 600w connector. Switchable semi-fanless mode 100% japanese capacitors super quiet 120mm fdb fan impressive compact design with 14cm depth extensive safety functions (ovp, uvp, opp, scp, ocp, otp, sip) detailed descriptionatx 3.0 ready with 12vhpwr 600w connector the regulator series uses an llc + dc/dc single-rail design with full atx 3.0 and pcie 5.0 compatibility, to supply modern graphics cards with up to 600w via the 12vhpwr connector. To negate the need for additional adapters, a 12vhpwr 600w cable with awg16 is provided switchable semi-fanless modethe regulator series has a dedicated semi-fanless mode, which you can easily activate thanks to the switch next to the power button. This mode passively cools the power supply, when operating at up to 40%, for whisper-quiet performance at low or medium loads. At higher loads, the fan starts at low speed and is then regulated according to temperature, supporting cooling. Protecting the power supply from heat build-up, the fan switches on automatically when the temperature becomes too high. When semi-fanless mode is disabled, the fan continues to run at a low speed even under light load. 100% japanese capacitorsto ensure excellent performance and reliability, the regulator series utilises premium japanese capacitors. Super-quiet fdb fan the 120mm fan is equipped with a fluid dynamic bearing (fdb), enhancing longevity and durability. The blades have an optimized curve design, to draw in air more efficiently and quietly. The wide 8mm spacing between fan grill and the fan blades guarantees low influx turbulence and better airflow performance while lowering noise. Stable voltages with low rippleensuring great stability and enhanced longevity, the regulator series offers clean supply and tight voltage regulation over the entire load range. Strikingly compact designa carefully curated circuit board layout allows for a housing only 15cm deep. As a result, the regulator series fits into a wide range of systems, guaranteeing quick and easy installation even when space is limited. Extensive protective functionsextensive safety functions have been implemented to ensure the safety of the power supply unit and the connected components. The regulator series offers a 7-fold protection circuit with overvoltage protection (ovp), undervoltage protection (uvp), overpower protection (opp), short-circuit protection (scp), overcurrent protection (ocp), overtemperature protection (otp), and surge / inrush current protection (sip).

EUR 107.90

1

Kolink KL-R1000FG PSU. Gen5. Gold - 1000W -virtalähde, ATX 3.0, 600W 12VHPWR, musta

Regulator 80 plus gold seriesthe regulator series from kolink offers a comprehensive set of modern features to enhance any system. With high-quality premium components and an efficient 80-plus-gold certified design, regulator delivers a reliable supply of power, while the fluid dynamic bearing fan provides whisper-quiet cooling. Thanks to its compact design, complex protection features, and a switchable semi-fanless mode, the fully modular regulator series stands for flexibility, reliability, and performance. The kolink regulator atx3.0 psu features: atx 3.0 / pcie 5.0 compatible with 12vhpwr 600w connector. Switchable semi-fanless mode 100% japanese capacitors super quiet 120mm fdb fan impressive compact design with 14cm depth extensive safety functions (ovp, uvp, opp, scp, ocp, otp, sip) detailed descriptionatx 3.0 ready with 12vhpwr 600w connector the regulator series uses an llc + dc/dc single-rail design with full atx 3.0 and pcie 5.0 compatibility, to supply modern graphics cards with up to 600w via the 12vhpwr connector. To negate the need for additional adapters, a 12vhpwr 600w cable with awg16 is provided switchable semi-fanless modethe regulator series has a dedicated semi-fanless mode, which you can easily activate thanks to the switch next to the power button. This mode passively cools the power supply, when operating at up to 40%, for whisper-quiet performance at low or medium loads. At higher loads, the fan starts at low speed and is then regulated according to temperature, supporting cooling. Protecting the power supply from heat build-up, the fan switches on automatically when the temperature becomes too high. When semi-fanless mode is disabled, the fan continues to run at a low speed even under light load. 100% japanese capacitorsto ensure excellent performance and reliability, the regulator series utilises premium japanese capacitors. Super-quiet fdb fan the 120mm fan is equipped with a fluid dynamic bearing (fdb), enhancing longevity and durability. The blades have an optimized curve design, to draw in air more efficiently and quietly. The wide 8mm spacing between fan grill and the fan blades guarantees low influx turbulence and better airflow performance while lowering noise. Stable voltages with low rippleensuring great stability and enhanced longevity, the regulator series offers clean supply and tight voltage regulation over the entire load range. Strikingly compact designa carefully curated circuit board layout allows for a housing only 15cm deep. As a result, the regulator series fits into a wide range of systems, guaranteeing quick and easy installation even when space is limited. Extensive protective functionsextensive safety functions have been implemented to ensure the safety of the power supply unit and the connected components. The regulator series offers a 7-fold protection circuit with overvoltage protection (ovp), undervoltage protection (uvp), overpower protection (opp), short-circuit protection (scp), overcurrent protection (ocp), overtemperature protection (otp), and surge / inrush current protection (sip).

EUR 143.90

1

Kolink Inspire K12 ARGB - miditornikotelo, Musta, Läpinäkyvä

With the kolink inspire k12 mid-tower pc case, you no longer have to choose between aesthetics and airflow. This chassis is the first from the kolink inspire series to integrate both argb lighting and airflow features into one model. Enjoy vibrant lighting from the pre-installed kolink umbra s argb/pwm 120mm fan and the two led strips illuminating the front mesh panel. Plus, with support for up to atx motherboards, 330mm long gpus, and water-cooling systems, this pc case is perfect for housing powerful gaming hardware.kolink inspire series k12 argb mid-tower pc case at a glance:- mid-tower pc case with mesh front panel and argb led strips- support for up to atx motherboards and 330mm long gpus- one pre-installed kolink umbra s argb/pwm 120mm fan- accommodates up to four storage drives- magnetic, hinged tempered glass half panel for easy access- fully featured i/o panel including usb 3.1inspirational aestheticsthe kolink inspire series is known for its bold aesthetics, bright rgb lighting, and all-around stylish good looks. The kolink inspire k12 mid-tower pc case fits the trend, but is the first of the series to focus on airflow in equal measure. The front panel features mesh panelling, accented by two argb led strips. This lighting is paired with a pre-installed kolink umbra s argb/pwm 120mm fan, mounted upon the back panel. Both these devices can be synced and controlled utilising the reset button or compatible motherboard software.forming the perfect backdrop to this lighting is the classic matte black finish on the metal frame. To showcase your high-end hardware, the kolink inspire k12 has a half-panel tempered glass door, hinged for easy access and held in place with magnets instead of screws. This panel is also tinted, for a sophisticated finish.inspired airflowin addition to the mesh panelling, the kolink inspire k12 has extensive support for both air and water-cooling, as well as a fully ventilated psu shroud. The front panel can support either three 120mm or 140mm fans. Alternatively, radiators up to 360mm long can be mounted here instead. Upon the ceiling there is space for two fans of either size or a slim 240mm radiator, and smaller. The pre-installed 120mm fan rests on the rear panel and can be replaced with a radiator of the same size. What’s more, there are two 120mm fan mounts on the psu shroud, to further enhance the cooling in that secondary chamber. Finally, there is clearance for cpu coolers up to 160mm tall.hardware inspothe kolink inspire k1 is more than just a beautiful pc case. This chassis is intelligently designed to support an astounding range of gaming hardware. The backplate can accommodate motherboards in atx, micro-atx, and mini-itx form factors, with seven pcie expansion slots on the rear panel. There is clearance for gpus up to 330mm in length, ensuring the chassis compatible with a wide selection of graphics cards that are currently available. The ventilated psu shroud has space for power supplies up to 180mm long.for storage, up to four drives can be installed within the kolink inspire k12. There are two brackets that can support either 2.5" ssds or 3.5" hdds, as well as two removeable ssd trays on the back of the motherboard plate. This allows for a flexible storage solution that is both fast and has ample capacity.inspire functionalityto make cable management easier, the kolink inspire k12's i/o panel is mounted on the side. This allows for better cable routing to the motherboard. This i/o panel includes two usb 2.0 and one usb 3.1 port, along with an hd audio jack.helping to prevent dirt build up, the kolink inspire k12 mid-tower pc case is equipped with two dust filters. The first is located on the top panel and is magnetic, to enable you to easily remove and clean the filter. The second dust filter is found at the bottom of the chassis.

EUR 54.00

1

Kolink Observatory Duo ARGB -miditornikotelo, ikkunalla, musta

Prioritise airflow and aesthetic, with the kolink observatory duo mid-tower pc case. This chassis comes with an easy to remove front panel, and two options for installation straight out of the box. Choose between a high-airflow mesh or stylish tempered glass - whichever suits your set-up best. What’s more, this pc case supports dual radiator water-cooling systems, gpus up to 335mm long, and a range of motherboard form factors, including e-atx. The cherry on top is the four pre-installed kolink umbra s fans, which add both high-performance cooling and a splash of argb colour.kolink observatory duo argb mid-tower pc case at a glance: mid-tower pc case with four pre-installed kolink umbra s argb/pwm fans swappable front panel - switch between included mesh and glass panels supports up to e-atx motherboard ventilated psu shroud with hexagonal cut outs and fan mounts 335 mm gpu clearance with front fans - or up to 360 mm without! Magnetic, hinged tempered side panel for easy access swap to suit your aesthetic the kolink observatory duo argb mid-tower pc case has been crafted to merge form and function. This chassis sports the classic combination of tinted tempered glass panelling and a matte black finish on the metal frame. Even better, the tempered glass panel is hinged, to allow you easier access to the interior, and held in place with magnets, for a clean aesthetic. For the front panel, you have a choice between two styles. Included within the scope of delivery are two front panels, one mesh and one tempered glass. Each can be easily installed or replaced, to suit your aesthetic or airflow needs.duo cooling enjoy extensive support for both air and water-cooling, with the kolink observatory duo. There are four kolink umbra s argb/pwm 120mm fans pre-installed across the chassis, with three mounted on the front and the last upon the rear panel. With their adjustable fan speeds and vibrant argb lighting, these fans are cool in more ways than one!alternatively, there are additional fan mounting options available. Upon the front, there is support for three 120mm or two 140mm fans, which could also be used for radiators up to 360mm. The top panel has brackets for two fans, either 140mm or 120mm. In lieu of this, the space holds a radiator up to 280mm. Upon the rear panel, there is space for either a singular 120mm fan or radiator. Additionally, the psu shroud can host two 120mm fans, to enhance the hexagonal cut-out ventilation integrated within its design. This shroud can accommodate power supplies up to 180mm long.thanks to the spacious design, the kolink observatory duo can support dual-radiator water-cooling systems, and cpu coolers up to 170mm in height. Hardware showcase the kolink observatory duo utilises an expertly curated design that optimises hardware installation. This mid-tower case can support multiple motherboard form factors, including mini-itx, micro-atx, atx, and e-atx. There are seven pcie expansion slots upon the back panel, three of which have screws. Gpu clearance depends on your fan configuration. If you have fans installed on the front panel, then there is up to 335mm clearance for your graphics card. Whereas, if there are no fans on the front panel, then this space increases to 360mm.for storage, you can install up to four drives within the kolink observatory duo. There are two toolless drives, which accommodate either 2.5" ssds or 2.5" hdds. Upon the back of the motherboard tray are two removable ssd trays, which both support 2.5" drives.finishing touchesoptimising connectivity and cable management, the kolink observatory duo has a side-mounted i/o panel. It features two usb 3.1 and one usb 2.0 ports, along with an hd audio jack and power buttons.included with the kolink observatory duo is a kolink umbra core argb controller. This is utilised to control the fan speeds and lighting effects on the pre-installed umbra fans. Additionally, it offers support for more argb or pwm devices, as well as a singular hub for control. Create stunning light displays to perfect your gaming pc’s aesthetic!

EUR 92.90

1

Awardvindende Google Marketing Powerhouse

Mærke

Butik

Pris (EUR)