35 resultater (0,29154 sekunder)

Vis alle filtre

Mærke

Butik

Pris (EUR)

Nulstil filter

Produkter
Fra
Butikker

Noctua NF-F12 industrialPPC-24V-2000 SP IP67 PWM, 120mm -kotelotuuletin, musta

Noctua NF-F12 industrialPPC-24V-2000 SP IP67 PWM, 120mm -kotelotuuletin, musta

These 24v sp variant uses noctua’s new ne-fd5 high-efficiency single-phase motor driver ic in order to support 24v-based industrial and automotive applications. Its sophisticated inrush current suppression and extreme electrical robustness with extended burst and surge immunity allow it to operate safely in sensitive or hostile electronic environments. Thanks to the outstanding aerodynamic efficiency of the nf-f12 design and the high-performance single-phase motor, the industrialppc sp version provides superior airflow and pressure capacity while keeping noise and power consumption at a moderate level as against comparable high-speed fans. While its fibre-glass reinforced polyamide construction and certified water and dust protection make the nf-f12 industrialppc suitable for operation in challenging surroundings, the renowned sso2 bearing technology guarantees an mttf of over 150,000hrs. Topped off with noctua’s trusted reliability and 6-year manufacturer’s warranty, the nf-f12 industrialppc is an ideal choice for highly demanding applications that require superior flow rates and ultimate dependability.

EUR 36.90
1

Noctua NF-F12 industrialPPC-24V-3000 SP IP67 PWM, 120mm -kotelotuuletin, musta

Noctua NF-F12 industrialPPC-24V-3000 SP IP67 PWM, 120mm -kotelotuuletin, musta

These 24v sp variant uses noctua’s new ne-fd5 high-efficiency single-phase motor driver ic in order to support 24v-based industrial and automotive applications. Its sophisticated inrush current suppression and extreme electrical robustness with extended burst and surge immunity allow it to operate safely in sensitive or hostile electronic environments. Thanks to the outstanding aerodynamic efficiency of the nf-f12 design and the high-performance single-phase motor, the industrialppc sp version provides superior airflow and pressure capacity while keeping noise and power consumption at a moderate level as against comparable high-speed fans. While its fibre-glass reinforced polyamide construction and certified water and dust protection make the nf-f12 industrialppc suitable for operation in challenging surroundings, the renowned sso2 bearing technology guarantees an mttf of over 150,000hrs. Topped off with noctua’s trusted reliability and 6-year manufacturer’s warranty, the nf-f12 industrialppc is an ideal choice for highly demanding applications that require superior flow rates and ultimate dependability.

EUR 36.90
1

Noctua NF-A14 industrial PPC-2000, 140mm -kotelotuuletin, musta

Noctua NF-A14 industrial PPC-2000, 140mm -kotelotuuletin, musta

Conceived for industrial heavy duty applications that require enhanced cooling performance and advanced ingress protection, the nf-a14 industrialppc (protected performance cooling) is a ruggedised high-speed version of the award-winning retail model. Thanks to the outstanding aerodynamic efficiency of the nf-a14 design and the use of a novel three-phase motor, the industrialppc version provides superior airflow and pressure capacity while keeping noise levels and power consumption moderate as against comparable high-speed fans. While its fibre-glass reinforced polyamide construction and certified water and dust protection make the nf-a14 industrialppc suitable for operation in challenging environments, the renowned sso2 bearing technology guarantees an mttf of over 150.000hrs. Topped off with noctua’s trusted reliability and 6 years manufacturer’s warranty, the nf-a14 industrialppc is an ideal choice for highly demanding applications that require superior flow rates and ultimate dependability.the industrialppc models are high-speed fans for industrial applications. As such, they are not as quiet as other noctua fans and less suited for low-noise pc builds. Unless you specifically require the higher speeds and performance of the industrialppc versions, we recommend using models of our other product lines (chromax if you prefer black fans) instead.award-winning nf-a14 designhaving received more than 100 awards and recommendations from the international press, noctua's nf-a14 has become a proven premium choice for 140mm cooling needs. Its renowned efficiency has convinced tens of thousands of customers all over the world.2000rpm industrialppc versionthanks to its elevated 2000rpm top speed, the nf-a14 industrialppc-2000 provides a significant performance boost over the 1500rpm retail version. Combined with the industrialppc series' robust polyamide construction and advanced protection features, this makes the fan ideal for challenging industrial applications.three-phase motor designwhile most axial fans use single-phase motors with 4 slots, noctua's industrialppc fans feature a three-phase design with 6 slots, which provides smoother transitions between the slots and thus allows for even higher running smoothness, further reduced vibrations and unprecedented energy efficiency.class-leading energy efficiencywhile the standard nf-a14 is one of the most energy efficient 1500rpm 140mm fans on the market, the industrialppc version's three-phase motor provides a further 10% reduction in power consumption when compared at 2000rpm.fibre-glass reinforced polyamide constructionboth the impeller and the frame of noctua’s industrialppc fans are made entirely from fibre-glass reinforced polyamide. This material can withstand temperatures up to 140°c and makes the fans even more robust and break-proof than noctua’s standard fibre-glass reinforced pbt fans.certified ip67 water- and dust protectionthe motor and pcb of the ip67 version are completely cast in a special, highly heat conductive resin that combines thoroughgoing protection and effective motor heat dissipation. Complying with the ingress protection rating ip67, this fan is not only fully dust tight but also completely waterproof up to 1m water depth.flow acceleration channelsthe nf-a14 impeller features suction side flow acceleration channels. By speeding up the airflow at the crucial outer blade regions, this measure reduces suction side flow separation and thus leads to better efficiency and lower vortex noise.aao framenoctua's aao (advanced acoustic optimisation) frames feature integrated anti-vibration pads as well as noctua's proprietary stepped inlet design and inner surface microstructures, both of which further refine the fan's performance/noise efficiency.stepped inlet designnoctua's stepped inlet design adds turbulence to the influx in order to facilitate the transition from laminar flow to turbulent flow, which reduces tonal intake noise, improves flow attachment and increases suction capacity, especially in space-restricted environments.inner surface microstructureswith the tips of the fan blades ploughing through the boundary layer created by the inner surface microstructures, flow separation from the suction side of the blades is significantly suppressed, which results in reduced blade passing noise and improved airflow and pressure efficiency.integrated anti-vibration padsintegrated anti-vibration pads made from extra-soft silicone minimise the transmission of minute vibrations while maintaining full compatibility with all standard screws and other mounting systems.sso2 bearingthe nf-a14 industrialppc features the further optimised second generation of noctua's renowned, time-tested sso bearing. With sso2, the rear magnet is placed closer to the axis to provide even better stabilisation, precision and durability.metal bearing shellin order to guarantee the highest possible degree of manufacturing precision, minimum tolerance and excellent long-term s

EUR 33.90
1

Noctua NF-A14 industrial PPC-24V-3000 SP, IP67, PWM, 140mm -kotelotuuletin

Noctua NF-A14 industrial PPC-24V-3000 SP, IP67, PWM, 140mm -kotelotuuletin

Conceived for industrial heavy-duty applications that require enhanced cooling performance and advanced ingress protection, the nf-a14 industrialppc (protected performance cooling) is a ruggedised high-speed version of the award-winning retail model. The 24v sp variant uses noctua’s new ne-fd5 high-efficiency single-phase motor driver ic in order to support 24v-based industrial and automotive applications. Its sophisticated inrush current suppression and extreme electrical robustness with extended burst and surge immunity allow it to operate safely in sensitive or hostile electronic environments. Thanks to the outstanding aerodynamic efficiency of the nf-a14 design and the high-performance single-phase motor, the industrialppc sp version provides superior airflow and pressure capacity while keeping noise and power consumption at a moderate level as against comparable high-speed fans. While its fibre-glass reinforced polyamide construction and certified water and dust protection make the nf-a14 industrialppc suitable for operation in challenging surroundings, the renowned sso2 bearing technology guarantees an mttf of over 150,000hrs. Topped off with noctua’s trusted reliability and 6-year manufacturer’s warranty, the nf-a14 industrialppc is an ideal choice for highly demanding applications that require superior flow rates and ultimate dependability.award-winning nf-a14 designhaving received more than 100 awards and recommendations from the international press, noctua's nf-a14 has become a proven premium choice for 140mm cooling needs. Its renowned efficiency has convinced tens of thousands of customers all over the world.3000rpm industrialppc versionrunning twice as fast as the 1500rpm retail version, the nf-a14 industrialppc-3000 provides extreme airflow and pressure performance. Combined with the industrialppc series' robust polyamide construction and advanced protection features, this makes the fan ideal for challenging industrial applications.24v sp versionthe industrialppc 24v sp models use noctua's new ne-fd5 high-performance single-phase pwm motor driver ic. Thanks to its excellent commutation efficiency, the ne-fd5 enables the sp versions to achieve exactly the same performance as previous models with three-phase motors.lower speed and noise levels in 12v pc environmentswhile the industrialppc 24v model has been designed with 24v industrial applications in mind, it runs at a maximum speed of around 1800rpm in 12v pc environments and can be slowed down further via pwm, thus combining industrialppc features and design with noctua’s signature quietness.ne-fd5 pwm ic with scdsupporting fully automatic pwm speed control, the fan uses noctua’s custom-designed ne-fd5 pwm ic for 24v single-phase motors. The ne-fd5 provides excellent energy efficiency and integrates noctua's proprietary smooth commutation drive (scd) technology, which suppresses pwm switching noise and thus makes the fan quieter at lower speeds.high electrical robustnessmeeting stringent requirements for burst and surge protection, the 24v sp version’s high electrical robustness permits the fan to be used not only in automotive projects but also in other harsh environments with transients from electric motors and other inductive switching loads.inrush current suppressionthe fan’s voltage-stabilised inrush current suppression provides a smooth power-up and dramatically reduces power line transients that otherwise could affect other electronic components connected to the power line. This makes the fan safe to use in sensitive electronic environments.certified ip67 water- and dust protectionthe motor and pcb of the ip67 version are completely cast in a special, highly heat conductive resin that combines thoroughgoing protection and effective motor heat dissipation. Complying with the ingress protection rating ip67, this fan is not only fully dust tight but also completely waterproof up to 1m water depth.fibre-glass reinforced polyamide constructionboth the impeller and the frame of noctua’s industrialppc fans are made entirely from fibre-glass reinforced polyamide. This material can withstand temperatures up to 140°c and makes the fans even more robust and break-proof than noctua’s standard fibre-glass reinforced pbt fans.flow acceleration channelsthe nf-a14 impeller features suction side flow acceleration channels. By speeding up the airflow at the crucial outer blade regions, this measure reduces suction side flow separation and thus leads to better efficiency and lower vortex noise.aao framenoctua's aao (advanced acoustic optimisation) frames feature integrated anti-vibration pads as well as noctua's proprietary stepped inlet design and inner surface microstructures, both of which further refine the fan's performance/noise efficiency.stepped inlet designnoctua's stepped inlet design adds turbulence to the influx in order to facilitate the transition from laminar flow to turbulent flow, which reduces tonal intake noise, improves flow attachmen

EUR 41.90
1

Noctua NF-F12 industrialPPC-2000 IP67 PWM, 120mm -kotelotuuletin, musta

Noctua NF-F12 industrialPPC-2000 IP67 PWM, 120mm -kotelotuuletin, musta

Conceived for industrial heavy duty applications that require enhanced cooling performance and advanced ingress protection, the nf-f12 industrialppc (protected performance cooling) is a ruggedised high-speed version of the award-winning retail model. Thanks to the outstanding aerodynamic efficiency of the nf-f12 design and the use of a novel three-phase motor, the industrialppc version provides superior airflow and pressure capacity while keeping noise levels and power consumption moderate as against comparable high-speed fans. While its fibre-glass reinforced polyamide construction and certified water and dust protection make the nf-f12 industrialppc suitable for operation in challenging environments, the renowned sso2 bearing technology guarantees an mttf of over 150.000hrs. Topped off with noctua’s trusted reliability and 6 years manufacturer’s warranty, the nf-f12 industrialppc is an ideal choice for highly demanding applications that require superior flow rates and ultimate dependability.award-winning nf-f12 designhaving received more than 150 awards and recommendations from the international press, noctua's nf-f12 has become a proven premium choice for 120mm cooling needs. Its renowned efficiency has convinced tens of thousands of customers all over the world.2000rpm industrialppc versionthanks to its elevated 2000rpm top speed, the nf-f12 industrialppc-2000 provides a significant performance boost over the 1500rpm retail version. Combined with the industrialppc series' robust polyamide construction and advanced protection features, this makes the fan ideal for challenging industrial applications.three-phase motor designwhile most axial fans use single-phase motors with 4 slots, noctua's industrialppc fans feature a three-phase design with 6 slots, which provides smoother transitions between the slots and thus allows for even higher running smoothness, further reduced vibrations and unprecedented energy efficiency.class-leading energy efficiencywhile the standard nf-f12 is one of the most energy efficient 1500rpm 120mm fans on the market, the industrialppc version's three-phase motor provides a further 10% reduction in power consumption when compared at 2000rpm.fibre-glass reinforced polyamide constructionboth the impeller and the frame of noctua’s industrialppc fans are made entirely from fibre-glass reinforced polyamide. This material can withstand temperatures up to 140°c and makes the fans even more robust and break-proof than noctua’s standard fibre-glass reinforced pbt fans.certified ip67 water- and dust protectionthe motor and pcb of the ip67 version are completely cast in a special, highly heat conductive resin that combines thoroughgoing protection and effective motor heat dissipation. Complying with the ingress protection rating ip67, this fan is not only fully dust tight but also completely waterproof up to 1m water depth.focused flow™ framedesigned for pressure demanding applications such as heatsinks and radiators, the focused flow™ frame features eleven stator guide vanes that straighten, channel and focus the airflow, which allows the nf-f12 to rival the performance of conventional fans running at much faster speeds.varying angular distance and vortex control notchesthe nf-f12's stator guide vanes are set out in varying angular distance and feature vortex-control notches. Both measures help to spread the noise emission over a broader frequency spectrum and thus make the fan's sound pattern more agreeable to the human ear.heptaperf™ impellercustom designed for the new focused flow™ frame and to work in tandem with the eleven stator guide vanes, the nf-f12's seven blade heptaperf™ impeller has been carefully optimised to achieve a perfect balance between power and quietness.aao framenoctua's aao (advanced acoustic optimisation) frames feature integrated anti-vibration pads as well as noctua's proprietary stepped inlet design and inner surface microstructures, both of which further refine the fan's performance/noise efficiency.stepped inlet designnoctua's stepped inlet design adds turbulence to the influx in order to facilitate the transition from laminar flow to turbulent flow, which reduces tonal intake noise, improves flow attachment and increases suction capacity, especially in space-restricted environments.inner surface microstructureswith the tips of the fan blades ploughing through the boundary layer created by the inner surface microstructures, flow separation from the suction side of the blades is significantly suppressed, which results in reduced blade passing noise and improved airflow and pressure efficiency.integrated anti-vibration padsintegrated anti-vibration pads made from extra-soft silicone minimise the transmission of minute vibrations while maintaining full compatibility with all standard screws and other mounting systems.sso2 bearingthe nf-f12 industrialppc features the further optimised second generation of noctua's renowned, time-tested sso bearing. With sso2, the r

EUR 37.90
1

Noctua NF-A14 industrial PPC-2000 IP67, PWM, 140mm -kotelotuuletin

Noctua NF-A14 industrial PPC-2000 IP67, PWM, 140mm -kotelotuuletin

Conceived for industrial heavy duty applications that require enhanced cooling performance and advanced ingress protection, the nf-a14 industrialppc (protected performance cooling) is a ruggedised high-speed version of the award-winning retail model. Thanks to the outstanding aerodynamic efficiency of the nf-a14 design and the use of a novel three-phase motor, the industrialppc version provides superior airflow and pressure capacity while keeping noise levels and power consumption moderate as against comparable high-speed fans. While its fibre-glass reinforced polyamide construction and certified water and dust protection make the nf-a14 industrialppc suitable for operation in challenging environments, the renowned sso2 bearing technology guarantees an mtbf of over 150.000hrs. Topped off with noctua’s trusted reliability and 6 years manufacturer’s warranty, the nf-a14 industrialppc is an ideal choice for highly demanding applications that require superior flow rates and ultimate dependability.award-winning nf-a14 designhaving received more than 100 awards and recommendations from the international press, noctua's nf-a14 has become a proven premium choice for 140mm cooling needs. Its renowned efficiency has convinced tens of thousands of customers all over the world.2000rpm industrialppc versionthanks to its elevated 2000rpm top speed, the nf-a14 industrialppc-2000 provides a significant performance boost over the 1500rpm retail version. Combined with the industrialppc series' robust polyamide construction and advanced protection features, this makes the fan ideal for challenging industrial applications.three-phase motor designwhile most axial fans use single-phase motors with 4 slots, noctua's industrialppc fans feature a three-phase design with 6 slots, which provides smoother transitions between the slots and thus allows for even higher running smoothness, further reduced vibrations and unprecedented energy efficiency.class-leading energy efficiencywhile the standard nf-a14 is one of the most energy efficient 1500rpm 140mm fans on the market, the industrialppc version's three-phase motor provides a further 10% reduction in power consumption when compared at 2000rpm.fibre-glass reinforced polyamide constructionboth the impeller and the frame of noctua’s industrialppc fans are made entirely from fibre-glass reinforced polyamide. This material can withstand temperatures up to 140°c and makes the fans even more robust and break-proof than noctua’s standard fibre-glass reinforced pbt fans.certified ip67 water- and dust protectionthe motor and pcb of the ip67 version are completely cast in a special, highly heat conductive resin that combines thoroughgoing protection and effective motor heat dissipation. Complying with the ingress protection rating ip67, this fan is not only fully dust tight but also completely waterproof up to 1m water depth.flow acceleration channelsthe nf-a14 impeller features suction side flow acceleration channels. By speeding up the airflow at the crucial outer blade regions, this measure reduces suction side flow separation and thus leads to better efficiency and lower vortex noise.aao framenoctua's aao (advanced acoustic optimisation) frames feature integrated anti-vibration pads as well as noctua's proprietary stepped inlet design and inner surface microstructures, both of which further refine the fan's performance/noise efficiency.stepped inlet designnoctua's stepped inlet design adds turbulence to the influx in order to facilitate the transition from laminar flow to turbulent flow, which reduces tonal intake noise, improves flow attachment and increases suction capacity, especially in space-restricted environments.inner surface microstructureswith the tips of the fan blades ploughing through the boundary layer created by the inner surface microstructures, flow separation from the suction side of the blades is significantly suppressed, which results in reduced blade passing noise and improved airflow and pressure efficiency.integrated anti-vibration padsintegrated anti-vibration pads made from extra-soft silicone minimise the transmission of minute vibrations while maintaining full compatibility with all standard mounting systems and fan clips used on heatsinks.sso2 bearingthe nf-a14 industrialppc features the further optimised second generation of noctua's renowned, time-tested sso bearing. With sso2, the rear magnet is placed closer to the axis to provide even better stabilisation, precision and durability.metal bearing shellin order to guarantee the highest possible degree of manufacturing precision, minimum tolerance and excellent long-term stability, the nf-a14 industrialppc sports a cnc milled bearing shell made entirely from brass.custom-designed pwm ic with scdsupporting fully automatic pwm speed control, the nf-a14 industrialppc uses noctua's custom-designed ne-fd2 pwm ic for three-phase motors. The ne-fd2 integrates noctua's proprietary smooth commutation drive (scd) technol

EUR 33.90
1

Noctua NF-A6x25 FLX, 60x25mm -kotelotuuletin

Noctua NF-A6x25 FLX, 60x25mm -kotelotuuletin

Featuring advanced aerodynamic design measures such as flow acceleration channels and noctua’s aao frame, the nf-a6x25 flx is a highly optimised, premium quality quiet fan in 60x25mm size. Smooth commutation drive technology and noctua’s reference class sso2 bearings guarantee superb running smoothness and excellent long-term stability. Topped off with modular cabling, low-noise adaptors and 6 years manufacturer’s warranty, the nf-a6x25 is a premium choice for the highest demands.flow acceleration channelsthe nf-a6x25 impeller features suction side flow acceleration channels. By speeding up the airflow at the crucial outer blade regions, this measure reduces suction side flow separation and thus leads to better efficiency and lower vortex noise. Buttonreduced motor hub sizethanks to its streamlined, compact motor design, the nf-a6x25’s motor hub is smaller than with conventional 6cm fans. This allows for more blade surface area and thus contributes to the nf-a6x25’s superior airflow and pressure performance.aao framenoctua’s aao (advanced acoustic optimisation) frames feature integrated anti-vibration pads as well as noctua’s proprietary stepped inlet design and inner surface microstructures, both of which further refine the fan’s performance/noise efficiency. Buttonstepped inlet designnoctua’s stepped inlet design adds turbulence to the influx in order to facilitate the transition from laminar flow to turbulent flow, which reduces tonal intake noise, improves flow attachment and increases suction capacity, especially in space restricted environments. Buttoninner surface microstructureswith the tips of the fan blades ploughing through the boundary layer created by the inner surface microstructures, flow separation from the suction side of the blades is significantly suppressed, which results in reduced blade passing noise and improved airflow and pressure efficiency. Buttonintegrated anti-vibration padsintegrated anti-vibration pads made from extra-soft silicone minimise the transmission of minute vibrations while maintaining full compatibility with all standard mounting systems and fan clips used on heatsinks.smooth commutation drive 2the latest version of noctua’s advanced smooth commutation drive system ensures superb running smoothness by eliminating torque variations and switching noises. This makes the nf-a6x25 remarkably quiet even at very close distance. Buttonsso2 bearingthe nf-a6x25 features the further optimised second generation of noctua’s renowned, time-tested sso bearing. With sso2, the rear magnet is placed closer to the axis to provide even better stabilisation, precision and durability. Button3 speed settings for full flexibilityproviding 3000, 2400 and 1600 rpm speed settings via the supplied low-noise and ultra-low-noise adapters, the nf-a6x25 flx (flexibility) can be fine-tuned for superior airflow or maximum quietness.extensive cabling optionsthe fan’s short 20cm primary cable minimises cable clutter in typical applications while the supplied 30cm extension provides extended reach when necessary. Both cables are fully sleeved and the supplied 3:4 pin adaptor allows to connect the fan directly to the power supply.

EUR 17.90
2

Noctua NF-F12 industrialPPC-2000 - 120mm -tuuletin

Noctua NF-F12 industrialPPC-2000 - 120mm -tuuletin

Conceived for industrial heavy duty applications that require enhanced cooling performance and advanced ingress protection, the nf-f12 industrialppc (protected performance cooling) is a ruggedised high-speed version of the award-winning retail model. Thanks to the outstanding aerodynamic efficiency of the nf-f12 design and the use of a novel three-phase motor, the industrialppc version provides superior airflow and pressure capacity while keeping noise levels and power consumption moderate as against comparable high-speed fans. While its fibre-glass reinforced polyamide construction and certified water and dust protection make the nf-f12 industrialppc suitable for operation in challenging environments, the renowned sso2 bearing technology guarantees an mtbf of over 150.000hrs. Topped off with noctua’s trusted reliability and 6 years manufacturer’s warranty, the nf-f12 industrialppc is an ideal choice for highly demanding applications that require superior flow rates and ultimate dependability.

EUR 30.90
1

Noctua NF-F12 industrialPPC 2000 PWM, 120mm -kotelotuuletin, musta

Noctua NF-F12 industrialPPC 2000 PWM, 120mm -kotelotuuletin, musta

Conceived for industrial heavy duty applications that require enhanced cooling performance and advanced ingress protection, the nf-f12 industrialppc (protected performance cooling) is a ruggedised high-speed version of the award-winning retail model. Thanks to the outstanding aerodynamic efficiency of the nf-f12 design and the use of a novel three-phase motor, the industrialppc version provides superior airflow and pressure capacity while keeping noise levels and power consumption moderate as against comparable high-speed fans. While its fibre-glass reinforced polyamide construction and certified water and dust protection make the nf-f12 industrialppc suitable for operation in challenging environments, the renowned sso2 bearing technology guarantees an mtbf of over 150.000hrs. Topped off with noctua’s trusted reliability and 6 years manufacturer’s warranty, the nf-f12 industrialppc is an ideal choice for highly demanding applications that require superior flow rates and ultimate dependability.

EUR 30.90
1

Noctua NF-F12 industrialPPC-3000 PWM - 120mm -tuuletin

Noctua NF-F12 industrialPPC-3000 PWM - 120mm -tuuletin

Conceived for industrial heavy duty applications that require enhanced cooling performance and advanced ingress protection, the nf-f12 industrialppc (protected performance cooling) is a ruggedised high-speed version of the award-winning retail model. Thanks to the outstanding aerodynamic efficiency of the nf-f12 design and the use of a novel three-phase motor, the industrialppc version provides superior airflow and pressure capacity while keeping noise levels and power consumption moderate as against comparable high-speed fans. While its fibre-glass reinforced polyamide construction and certified water and dust protection make the nf-f12 industrialppc suitable for operation in challenging environments, the renowned sso2 bearing technology guarantees an mtbf of over 150.000hrs. Topped off with noctua’s trusted reliability and 6 years manufacturer’s warranty, the nf-f12 industrialppc is an ideal choice for highly demanding applications that require superior flow rates and ultimate dependability.

EUR 29.90
1

Noctua NF-A14 industrial PPC-2000, PWM, 140mm -kotelotuuletin, musta

Noctua NF-A14 industrial PPC-2000, PWM, 140mm -kotelotuuletin, musta

Conceived for industrial heavy duty applications that require enhanced cooling performance and advanced ingress protection, the nf-a14 industrialppc (protected performance cooling) is a ruggedised high-speed version of the award-winning retail model. Thanks to the outstanding aerodynamic efficiency of the nf-a14 design and the use of a novel three-phase motor, the industrialppc version provides superior airflow and pressure capacity while keeping noise levels and power consumption moderate as against comparable high-speed fans. While its fibre-glass reinforced polyamide construction and certified water and dust protection make the nf-a14 industrialppc suitable for operation in challenging environments, the renowned sso2 bearing technology guarantees an mttf of over 150.000hrs. Topped off with noctua’s trusted reliability and 6 years manufacturer’s warranty, the nf-a14 industrialppc is an ideal choice for highly demanding applications that require superior flow rates and ultimate dependability.the industrialppc models are high-speed fans for industrial applications. As such, they are not as quiet as other noctua fans and less suited for low-noise pc builds. Unless you specifically require the higher speeds and performance of the industrialppc versions, we recommend using models of our other product lines (chromax if you prefer black fans) instead.award-winning nf-a14 designhaving received more than 100 awards and recommendations from the international press, noctua's nf-a14 has become a proven premium choice for 140mm cooling needs. Its renowned efficiency has convinced tens of thousands of customers all over the world.2000rpm industrialppc versionthanks to its elevated 2000rpm top speed, the nf-a14 industrialppc-2000 provides a significant performance boost over the 1500rpm retail version. Combined with the industrialppc series' robust polyamide construction and advanced protection features, this makes the fan ideal for challenging industrial applications.three-phase motor designwhile most axial fans use single-phase motors with 4 slots, noctua's industrialppc fans feature a three-phase design with 6 slots, which provides smoother transitions between the slots and thus allows for even higher running smoothness, further reduced vibrations and unprecedented energy efficiency.class-leading energy efficiencywhile the standard nf-a14 is one of the most energy efficient 1500rpm 140mm fans on the market, the industrialppc version's three-phase motor provides a further 10% reduction in power consumption when compared at 2000rpm.fibre-glass reinforced polyamide constructionboth the impeller and the frame of noctua’s industrialppc fans are made entirely from fibre-glass reinforced polyamide. This material can withstand temperatures up to 140°c and makes the fans even more robust and break-proof than noctua’s standard fibre-glass reinforced pbt fans.certified ip52 water- and dust protectionthanks to a special varnish coating that covers the motor and pcb, the nf-a14 industrialppc complies with the ingress protection rating ip52. This means that it is not only highly dust resistant but also withstands dripping water equivalent to 3mm rainfall per minute.flow acceleration channelsthe nf-a14 impeller features suction side flow acceleration channels. By speeding up the airflow at the crucial outer blade regions, this measure reduces suction side flow separation and thus leads to better efficiency and lower vortex noise.aao framenoctua's aao (advanced acoustic optimisation) frames feature integrated anti-vibration pads as well as noctua's proprietary stepped inlet design and inner surface microstructures, both of which further refine the fan's performance/noise efficiency.stepped inlet designnoctua's stepped inlet design adds turbulence to the influx in order to facilitate the transition from laminar flow to turbulent flow, which reduces tonal intake noise, improves flow attachment and increases suction capacity, especially in space-restricted environments.inner surface microstructureswith the tips of the fan blades ploughing through the boundary layer created by the inner surface microstructures, flow separation from the suction side of the blades is significantly suppressed, which results in reduced blade passing noise and improved airflow and pressure efficiency.integrated anti-vibration padsintegrated anti-vibration pads made from extra-soft silicone minimise the transmission of minute vibrations while maintaining full compatibility with all standard screws and other mounting systems.sso2 bearingthe nf-a14 industrialppc features the further optimised second generation of noctua's renowned, time-tested sso bearing. With sso2, the rear magnet is placed closer to the axis to provide even better stabilisation, precision and durability.metal bearing shellin order to guarantee the highest possible degree of manufacturing precision, minimum tolerance and excellent long-term stability, the nf-a14 industrialppc sports a cnc mil

EUR 33.90
2

Noctua NF-A14 industrial PPC-3000, PWM, 140mm - kotelotuuletin, musta

Noctua NF-A14 industrial PPC-3000, PWM, 140mm - kotelotuuletin, musta

Conceived for industrial heavy duty applications that require enhanced cooling performance and advanced ingress protection, the nf-a14 industrialppc (protected performance cooling) is a ruggedised high-speed version of the award-winning retail model. Thanks to the outstanding aerodynamic efficiency of the nf-a14 design and the use of a novel three-phase motor, the industrialppc version provides superior airflow and pressure capacity while keeping noise levels and power consumption moderate as against comparable high-speed fans. While its fibre-glass reinforced polyamide construction and certified water and dust protection make the nf-a14 industrialppc suitable for operation in challenging environments, the renowned sso2 bearing technology guarantees an mtbf of over 150.000hrs. Topped off with noctua’s trusted reliability and 6 years manufacturer’s warranty, the nf-a14 industrialppc is an ideal choice for highly demanding applications that require superior flow rates and ultimate dependability.award-winning nf-a14 designhaving received more than 100 awards and recommendations from the international press, noctua's nf-a14 has become a proven premium choice for 140mm cooling needs. Its renowned efficiency has convinced tens of thousands of customers all over the world.3000rpm industrialppc versionrunning twice as fast as the 1500rpm retail version, the nf-a14 industrialppc-3000 provides extreme airflow and pressure performance. Combined with the industrialppc series' robust polyamide construction and advanced protection features, this makes the fan ideal for challenging industrial applications. Three-phase motor designwhile most axial fans use single-phase motors with 4 slots, noctua's industrialppc fans feature a three-phase design with 6 slots, which provides smoother transitions between the slots and thus allows for even higher running smoothness, further reduced vibrations and unprecedented energy efficiency.class-leading energy efficiencywhile the standard nf-a14 is one of the most energy efficient 1500rpm 140mm fans on the market, the industrialppc version's three-phase motor provides a further 10% reduction in power consumption when compared at 2000rpm.fibre-glass reinforced polyamide constructionboth the impeller and the frame of noctua’s industrialppc fans are made entirely from fibre-glass reinforced polyamide. This material can withstand temperatures up to 140°c and makes the fans even more robust and break-proof than noctua’s standard fibre-glass reinforced pbt fans.certified ip52 water- and dust protectionthanks to a special varnish coating that covers the motor and pcb, the nf-a14 industrialppc complies with the ingress protection rating ip52. This means that it is not only highly dust resistant but also withstands dripping water equivalent to 3mm rainfall per minute. Flow acceleration channelsthe nf-a14 impeller features suction side flow acceleration channels. By speeding up the airflow at the crucial outer blade regions, this measure reduces suction side flow separation and thus leads to better efficiency and lower vortex noise.aao framenoctua's aao (advanced acoustic optimisation) frames feature integrated anti-vibration pads as well as noctua's proprietary stepped inlet design and inner surface microstructures, both of which further refine the fan's performance/noise efficiency.stepped inlet designnoctua's stepped inlet design adds turbulence to the influx in order to facilitate the transition from laminar flow to turbulent flow, which reduces tonal intake noise, improves flow attachment and increases suction capacity, especially in space-restricted environments.inner surface microstructureswith the tips of the fan blades ploughing through the boundary layer created by the inner surface microstructures, flow separation from the suction side of the blades is significantly suppressed, which results in reduced blade passing noise and improved airflow and pressure efficiency.integrated anti-vibration padsintegrated anti-vibration pads made from extra-soft silicone minimise the transmission of minute vibrations while maintaining full compatibility with all standard mounting systems and fan clips used on heatsinks.sso2 bearingthe nf-a14 industrialppc features the further optimised second generation of noctua's renowned, time-tested sso bearing. With sso2, the rear magnet is placed closer to the axis to provide even better stabilisation, precision and durability.metal bearing shellin order to guarantee the highest possible degree of manufacturing precision, minimum tolerance and excellent long-term stability, the nf-a14 industrialppc sports a cnc milled bearing shell made entirely from brass.custom-designed pwm ic with scdsupporting fully automatic pwm speed control, the nf-a14 industrialppc uses noctua's custom-designed ne-fd2 pwm ic for three-phase motors. The ne-fd2 integrates noctua's proprietary smooth commutation drive (scd) technology, which suppresses pwm switching noises and thus makes the

EUR 31.90
2

Noctua NF-A6x25 5V Premium, 60x60mm -tuuletin

Noctua NF-A6x25 5V Premium, 60x60mm -tuuletin

Featuring advanced aerodynamic design measures such as flow acceleration channels and noctua’s aao frame, the nf-a6x25 5v is a dedicated 5v version of noctua’s highly optimised, premium-quality quiet 60x25mm fan. Smooth commutation drive technology and noctua’s reference-class sso2 bearing guarantee superb running smoothness and excellent long-term stability. Topped off with modular cabling, the omnijoin™ adaptor set and a 6-year manufacturer’s warranty, the nf-a6x25 5v is a premium choice for demanding 5v applications.5v versionmany devices, such as network or storage solutions, use 5 volt 60mm fans. With the same operating voltage and the included omnijoin™ adaptor set that makes it compatible with proprietary fan headers, the nf-a6x25 5v is ideal for replacing noisy or broken 5v 60mm fans.polarity protectionas many devices using 5v fans feature proprietary connectors and documentation of the pin alignment may not be available, the fan features an integrated diode for polarity protection. This way, you're on the safe side if you accidentally connect it with reverse polarity.reduced motor hub sizethanks to its streamlined, compact motor design, the nf-a6x25's motor hub is smaller than with conventional 6cm fans. This allows for more blade surface area and thus contributes to the nf-a6x25's superior airflow and pressure performance.flow acceleration channelsthe nf-a6x25 impeller features suction side flow acceleration channels. By speeding up the airflow at the crucial outer blade regions, this measure reduces suction side flow separation and thus leads to better efficiency and lower vortex noise.aao framenoctua's aao (advanced acoustic optimisation) frames feature integrated anti-vibration pads as well as noctua's proprietary stepped inlet design and inner surface microstructures, both of which further refine the fan's performance/noise efficiency.stepped inlet designnoctua's stepped inlet design adds turbulence to the influx in order to facilitate the transition from laminar flow to turbulent flow, which reduces tonal intake noise, improves flow attachment and increases suction capacity, especially in space-restricted environments.inner surface microstructureswith the tips of the fan blades ploughing through the boundary layer created by the inner surface microstructures, flow separation from the suction side of the blades is significantly suppressed, which results in reduced blade passing noise and improved airflow and pressure efficiency.integrated anti-vibration padsintegrated anti-vibration pads made from extra-soft silicone minimise the transmission of minute vibrations while maintaining full compatibility with all standard mounting systems and fan clips used on heatsinks.smooth commutation drive 2the latest version of noctua's advanced smooth commutation drive system ensures superb running smoothness by eliminating torque variations and switching noises. This makes the nf-a6x25 remarkably quiet even at very close distances.sso2 bearingthe nf-a6x25 features the further optimised second generation of noctua's renowned, time-tested sso bearing. With sso2, the rear magnet is placed closer to the axis to provide even better stabilisation, precision and durability.omnijoin™ adaptor setmany devices featuring 60mm fans use proprietary fan headers, so the nf-a6x25 5v comes with noctua’s omnijoin adaptor set. Just cut the original fan’s cable, fix it to the adaptor using the supplied 3m scotchlok™ connectors and you can plug the nf-a6x25 5v to proprietary fan headers!6-year manufacturer’s warrantynoctua fans are renowned for their impeccable quality and outstanding longevity. Like all noctua fans, the nf-a6x25 features an mtbf of more than 150.000 hours rating and comes with a full 6-year manufacturer's warranty.

EUR 19.90
1

Noctua NF-A4x10 FLX, 40x40mm -kotelotuuletin

Noctua NF-A4x10 FLX, 40x40mm -kotelotuuletin

Noctua - bildfeaturing advanced aerodynamic design measures such as flow acceleration channels and noctua’s aao frame, the nf-a4x10 flx is a highly optimised, premium quality quiet fan in 40x10mm size. Smooth commutation drive technology and noctua’s reference class sso2 bearings guarantee superb running smoothness and excellent long-term stability. Topped off with modular cabling, a low-noise adaptor and omnijoin adaptor set as well as 6 years manufacturer’s warranty, the nf-a4x10 is a premium choice for the highest demands.flow acceleration channelsthe nf-a4x10 impeller features suction side flow acceleration channels. By speeding up the airflow at the crucial outer blade regions, this measure reduces suction side flow separation and thus leads to better efficiency and lower vortex noise. Buttonvarying angular distance reduced motor hub sizethanks to its streamlined, compact motor design, the nf-a4x10’s motor hub is smaller than with conventional 4cm fans. This allows for more blade surface area and thus contributes to the nf-a4x10’s superior airflow and pressure performance.heptaperf aao framenoctua’s aao (advanced acoustic optimisation) frames feature integrated anti-vibration pads as well as noctua’s proprietary stepped inlet design and inner surface microstructures, both of which further refine the fan’s performance/noise efficiency. Buttonstepped inlet designnoctua’s stepped inlet design adds turbulence to the influx in order to facilitate the transition from laminar flow to turbulent flow, which reduces tonal intake noise, improves flow attachment and increases suction capacity, especially in space restricted environments. Buttoninner surface microstructureswith the tips of the fan blades ploughing through the boundary layer created by the inner surface microstructures, flow separation from the suction side of the blades is significantly suppressed, which results in reduced blade passing noise and improved airflow and pressure efficiency. Buttonintegrated anti-vibration integrated anti-vibration padsintegrated anti-vibration pads made from extra-soft silicone minimise the transmission of minute vibrations while maintaining full compatibility with all standard mounting systems and fan clips used on heatsinks.sso2 smooth commutation drive 2the latest version of noctua’s advanced smooth commutation drive system ensures superb running smoothness by eliminating torque variations and switching noises. This makes the nf-a4x10 remarkably quiet even at very close distance. Buttonsso2 sso2 bearingthe nf-a4x10 features the further optimised second generation of noctua’s renowned, time-tested sso bearing. With sso2, the rear magnet is placed closer to the axis to provide even better stabilisation, precision and durability. Buttonlna low-noise adaptor for full flexibilitythe nf-a4x10 flx (flexibility) is supplied with a low-noise adaptor (l.n.a.) that reduces the maximum fan speed from 4500 to 3700rpm so that it can be fine-tuned for superior airflow or maximum quietness.lna 3 to 2-pin adaptor and polarity protectionthe nf-a4x10 comes with an adaptor from 3-pin molex to the 2-pin connectors used on many graphics cards or network and storage devices. An integrated diode provides polarity protection on 2-pin connections.sso2 omnijoin adaptor setmany devices featuring 40mm fans use proprietary fan headers, so the nf-a4x10 comes with noctua’s omnijoin adaptor set. Just cut the original fan’s cable, fix it to the adaptor using the supplied 3m scotchlok™ connectors and you can plug the nf-a4x10 to proprietary fan headers! Buttoncabling options extensive cabling optionsthe fan’s short 20cm primary cable minimises cable clutter in typical applications while the supplied 30cm extension provides extended reach when necessary. Both cables are fully sleeved.warranty 6 years manufacturer’s warrantynoctua fans are renowned for their impeccable quality and outstanding longevity. Like all noctua fans, the nf-a4x10 features an mtbf of more than 150.000 hours rating and comes with a full 6 years manufacturer’s warranty.

EUR 14.90
2

Noctua NF-A4x10, 24V, PWM, 40mm -kotelotuuletin

Noctua NF-A4x10, 24V, PWM, 40mm -kotelotuuletin

The nf-a4x10 24v pwm is a pwm-enabled 24v variant of noctua’s award-winning, premium-quality nf-a4x10 40mm fan. As such, it is ideal for 24v-based 3d printers as well as various other 24v applications. Featuring an aao (advanced acoustic optimisation) standard frame and sophisticated aerodynamic design measures such as flow acceleration channels, the nf-a4x10 is renowned for its superior performance and outstanding quietness of operation. Smooth commutation drive technology and noctua’s reference class sso2 bearing guarantee superb running smoothness and excellent long-term stability. Topped off with the included omnijoin adaptor set, na-ac9 adaptor cable for popular 3d printers (e.g. Creality ender 3 & cr-10, anycubic mega), low-noise adaptor and 6-year manufacturer’s warranty, the nf-a4x10 24v pwm is a premium choice for demanding 24v applications with or without pwm control.award-winning nf-a4x10 designhaving received more than 50 awards and recommendations from the international press, noctua’s nf-a4x10 has become a proven premium choice for 40mm cooling needs. Its renowned efficiency has convinced tens of thousands of customers all over the world.24v pwm version24v fans are used in various devices and applications ranging from 3d printers to automotive. With the included omnijoin™ adaptor set, the nf-a4x10 24v is a proven, pwm-enabled premium solution that gives you full flexibility both for replacing existing 24v fans and for new, custom applications.ideal for 3d printersmany 3d printers such as the popular creality ender 3 or anycubic mega use 24v fans. With the included na-ac9 adaptor cable for jst xhp-2 2.5mm headers as well as the omnijoin™ adaptor set that makes fitting custom connectors a breeze, the nf-a4x10 24v pwm is an ideal choice for cooling the hot end of 24v-based 3d printers or for additional part cooling.reduced motor hub sizethanks to its streamlined, compact motor design, the nf-a4x10's motor hub is smaller than with conventional 4cm fans. This allows for more blade surface area and thus contributes to the nf-a4x10's superior airflow and pressure performance.flow acceleration channelsthe nf-a4x10 impeller features suction side flow acceleration channels. By speeding up the airflow at the crucial outer blade regions, this measure reduces suction side flow separation and thus leads to better efficiency and lower vortex noise.aao framenoctua's aao (advanced acoustic optimisation) frames feature integrated anti-vibration pads as well as noctua's proprietary stepped inlet design and inner surface microstructures, both of which further refine the fan's performance/noise efficiency.stepped inlet designnoctua's stepped inlet design adds turbulence to the influx in order to facilitate the transition from laminar flow to turbulent flow, which reduces tonal intake noise, improves flow attachment and increases suction capacity, especially in space-restricted environments.inner surface microstructureswith the tips of the fan blades ploughing through the boundary layer created by the inner surface microstructures, flow separation from the suction side of the blades is significantly suppressed, which results in reduced blade passing noise and improved airflow and pressure efficiency.integrated anti-vibration padsintegrated anti-vibration pads made from extra-soft silicone minimise the transmission of minute vibrations while maintaining full compatibility with all standard screws and most other mounting mechanisms.ne-fd5 motor driver icthe ne-fd5 is a novel 24v single-phase fan driver ic that integrates noctua’s smooth commutation drive 2 technology in order to achieve superbly smooth commutation performance. Combined with its advanced protection features, high torque and excellent energy efficiency, it’s the perfect cornerstone for robust high-performance fans that can run near inaudible at lower speeds.pwm control with wide speed rangesupporting pwm-based speed control, the nf-a4x10 24v pwm can be pwm-controlled from its maximum speed of 5000rpm all the way down to 1100rpm. This makes it possible to adjust the fan for near-silent operation or maximum performance using either manual speed controllers such as the na-fc1 or automatic speed control setups.stops at 0% pwmwhen the fan is set to 0% pwm duty cycle by the motherboard or pwm fan controller, it will stop. This makes it ideal for creating setups with semi-passive cooling that automatically turn the fans off and thus run completely silent at idle if thermals allow.advanced protection featuresprotected against reverse polarity, over voltage and over current (short-circuits), the fan is suitable for use in challenging electrical environments. At the same time, its ultra-low emc emissions make it ideal for applications where electrical interference is critical. Last but not least, its locked rotor and overloading protection add extra safety in situations where the fan may be blocked mechanically.safety certificationsunlike many cheap fans, the nf

EUR 18.90
1

Noctua NF-A4x10 PWM Premium, 40x40mm -kotelotuuletin

Noctua NF-A4x10 PWM Premium, 40x40mm -kotelotuuletin

Featuring advanced aerodynamic design measures such as flow acceleration channels and noctua’s aao frame, the nf-a4x10 is an award-winning, premium-quality quiet fan in size 40x10mm. The pwm version sports noctua’s custom-designed ne-fd1 ic for fully automatic speed control via 4-pin fan headers and comes with a low-noise adaptor as well as an omnijoin adaptor set for easy connection to proprietary fan headers. Its superb running smoothness, reference-class sso2 bearing and noctua’s trusted premium quality make it an elite choice for the highest demands.award-winning nf-a4x10 designhaving received more than 50 awards and recommendations from the international press, noctua’s nf-a4x10 has become a proven premium choice for 40mm cooling needs. Its renowned efficiency has convinced tens of thousands of customers all over the world.reduced motor hub sizethanks to its streamlined, compact motor design, the nf-a4x10's motor hub is smaller than with conventional 4cm fans. This allows for more blade surface area and thus contributes to the nf-a4x10's superior airflow and pressure performance.flow acceleration channelsthe nf-a4x10 impeller features suction side flow acceleration channels. By speeding up the airflow at the crucial outer blade regions, this measure reduces suction side flow separation and thus leads to better efficiency and lower vortex noise.aao framenoctua's aao (advanced acoustic optimisation) frames feature integrated anti-vibration pads as well as noctua's proprietary stepped inlet design and inner surface microstructures, both of which further refine the fan's performance/noise efficiency.stepped inlet designnoctua's stepped inlet design adds turbulence to the influx in order to facilitate the transition from laminar flow to turbulent flow, which reduces tonal intake noise, improves flow attachment and increases suction capacity, especially in space-restricted environments.inner surface microstructureswith the tips of the fan blades ploughing through the boundary layer created by the inner surface microstructures, flow separation from the suction side of the blades is significantly suppressed, which results in reduced blade passing noise and improved airflow and pressure efficiency.integrated anti-vibration padsintegrated anti-vibration pads made from extra-soft silicone minimise the transmission of minute vibrations while maintaining full compatibility with all standard mounting systems and fan clips used on heatsinks.custom-designed pwm ic with scdsupporting fully automatic pwm speed control, the nf-a4x10 pwm uses noctua's novel, custom-designed ne-fd1 pwm ic that integrates smooth commutation drive (scd) technology. By providing smoother torque impulses, scd suppresses pwm switching noises and thus makes the fan quieter at lower speeds.stops at 0% pwmwhen the fan is set to 0% pwm duty cycle by the motherboard or pwm fan controller, it will stop. This makes it ideal for creating setups with semi-passive cooling that automatically turn the fans off and thus run completely silent at idle if thermals allow.sso2 bearingthe nf-a4x10 features the further optimised second generation of noctua's renowned, time-tested sso bearing. With sso2, the rear magnet is placed closer to the axis to provide even better stabilisation, precision and durability.low-noise adaptorthe nf-a4x10 pwm is supplied with a low-noise adaptor (l.n.a.) that reduces the maximum fan speed from 5000 to 3700rpm. The l.n.a. Can be used either to run the fan at a fixed speed of 3700rpm or to cap the maximum speed when using automatic pwm control.omnijoin™ adaptor setmany devices featuring 40mm fans use proprietary fan headers, so the nf-a4x10 comes with noctua's omnijoin™ adaptor set. Just cut the original fan's cable, fix it to the adaptor using the supplied 3m scotchlok™ connectors and you can plug the nf-a4x10 to proprietary fan headers!extensive cabling optionsthe fan's short 20cm primary cable minimises cable clutter in typical applications while the supplied 30cm extension provides extended reach when necessary. Both cables are fully sleeved and a 4-pin y-cable allows the connection of a second fan to the same pwm fan header for automatic control.6-year manufacturer’s warrantynoctua fans are renowned for their impeccable quality and outstanding longevity. Like all noctua fans, the nf-a4x10 features an mttf of more than 150.000 hours rating and comes with a full 6-year manufacturer's warranty.

EUR 16.90
2

Noctua NF-A12x25 PWM Premium, 120mm -kotelotuuletin

Noctua NF-A12x25 PWM Premium, 120mm -kotelotuuletin

The nf-a12x25 is a highly optimised next-generation 120mm fan that integrates noctua’s latest innovations in aerodynamic engineering in order to achieve an unprecedented level of quiet cooling performance. It takes state-of-the-art technologies such as the aao (advanced acoustic optimisation) frame or flow acceleration channels and combines them with a record tight tip clearance of only 0.5mm, which is made possible by using the novel sterrox liquid-crystal polymer (lcp) compound as well as a metal-reinforced motor hub and axis for ultimate precision. Following the approach of noctua’s a-series, the nf-a12x25 is a true all-rounder that yields superb results in all types of usage, regardless of whether it’s in low-impedance, airflow-oriented applications such as case cooling, or high-impedance, pressure-demanding scenarios such as on heatsinks and watercooling radiators. The 4-pin pwm version supports fully automatic speed control via pwm fan headers and comes with a low-noise adaptor to reduce the maximum speed from 2000 to 1700rpm. Topped off with exceptional running smoothness, noctua’s reference-class sso2 bearing, a rich bundle of accessories and 6-year manufacturer’s warranty, the nf-a12x25 is a premium-quality product through and through. Its superior efficiency, cutting-edge construction and pioneering materials make it an elite choice for the most discerning demands.

EUR 31.90
1

Noctua NF-A12x25 5V PWM Premium, 120mm -tuuletin, valkoinen

Noctua NF-A12x25 5V PWM Premium, 120mm -tuuletin, valkoinen

The nf-a12x25 is a highly optimised next-generation 120mm fan that integrates noctua’s latest innovations in aerodynamic engineering in order to achieve an unprecedented level of quiet cooling performance. It takes state-of-the-art technologies such as the aao (advanced acoustic optimisation) frame or flow acceleration channels and combines them with a record tight tip clearance of only 0.5mm, which is made possible by using the novel sterrox® liquid-crystal polymer (lcp) compound as well as a metal-reinforced motor hub and axis for ultimate precision. Following the approach of noctua’s a-series, the nf-a12x25 is a true all-rounder that yields superb results in all types of usage, regardless of whether it’s in low-impedance, airflow-oriented applications such as case cooling, or high-impedance, pressure-demanding scenarios such as on heatsinks and watercooling radiators. The 4-pin pwm version supports fully automatic speed control via pwm fan headers and comes with a low-noise adaptor to reduce the maximum speed from 2000 to 1700rpm. Topped off with exceptional running smoothness, noctua’s reference-class sso2 bearing, a rich bundle of accessories and 6-year manufacturer’s warranty, the nf-a12x25 is a premium-quality product through and through. Its superior efficiency, cutting-edge construction and pioneering materials make it an elite choice for the most discerning demands.next-generation performancenoctua’s 120mm fans such as the nf-f12 and nf-s12a are renowned as being among the best on the market and have received more than 400 awards and recommendations from the international press. With its further improved efficiency and novel, state-of-the-art engineering, the nf-a12x25 represents another step up in performance and manufacturing.highly optimised p/q curve for all applicationsthe nf-a12x25’s sophisticated aerodynamic design allows for a pressure to airflow (p/q) curve that is extremely strong in the critical mid-section. This means that the nf-a12x25 is a true jack-of-all-trades with excellent performance in both static pressure demanding and airflow demanding applications.excellent on-application acousticswhile many fans produce unpleasant, high-pitched noises when installed in typical applications such as on heatsinks or radiators, the nf-a12x25 has been carefully fine-tuned for optimal on-application acoustics. It produces a smooth, pleasant frequency profile and surprisingly low sound pressure levels (spl) when working against back pressure.flow acceleration channelsthe nf-a12x25 impeller features suction side flow acceleration channels. By speeding up the airflow at the crucial outer blade regions, this measure reduces suction side flow separation and thus leads to better efficiency and lower vortex noise.ultra-tight tip clearancethe nf-a12x25 has a record tight tip clearance (distance between the blade tips and the inside of the frame) of only 0.5mm. This highly ambitious design sets a new benchmark for 120mm fans and helps the nf-a12x25 to work more efficiently against back pressure, such as on heatsinks or radiators, by reducing leak flows through the gap between impeller and frame.metal-reinforced motor hubthe centrepiece of the nf-a12x25’s motor hub is made entirely from steel and the axle mount is reinforced with an additional brass structure. In combination, both measures ensure ultimate precision and increased stability in the critical hub area.sterrox® liquid-crystal polymer compoundthe nf-a12x25’s impeller is made from noctua’s novel sterrox® liquid-crystal polymer (lcp) compound that features extreme tensile strength, an exceptionally low thermal expansion coefficient and damping characteristics that are ideal for reducing resonance and vibration phenomena in advanced fan-blade designs.aao framenoctua's aao (advanced acoustic optimisation) frames feature integrated anti-vibration pads as well as noctua's proprietary stepped inlet design and inner surface microstructures, both of which further refine the fan's performance/noise efficiency.stepped inlet designnoctua's stepped inlet design adds turbulence to the influx in order to facilitate the transition from laminar flow to turbulent flow, which reduces tonal intake noise, improves flow attachment and increases suction capacity, especially in space-restricted environments.inner surface microstructureswith the tips of the fan blades ploughing through the boundary layer created by the inner surface microstructures, flow separation from the suction side of the blades is significantly suppressed, which results in reduced blade passing noise and improved airflow and pressure efficiency.integrated anti-vibration padsintegrated anti-vibration pads made from extra-soft silicone minimise the transmission of minute vibrations while maintaining full compatibility with all standard screws and other mounting systems.anti-vibration gasket for watercooling radiatorsthe nf-a12x25 includes a silicone gasket that can be used when installing the fan on

EUR 34.90
1

Noctua NF-A12x25 FLX Premium, 120mm -kotelotuuletin

Noctua NF-A12x25 FLX Premium, 120mm -kotelotuuletin

The nf-a12x25 is a highly optimised next-generation 120mm fan that integrates noctua’s latest innovations in aerodynamic engineering in order to achieve an unprecedented level of quiet cooling performance. It takes state-of-the-art technologies such as the aao (advanced acoustic optimisation) frame or flow acceleration channels and combines them with a record tight tip clearance of only 0.5mm, which is made possible by using the novel sterrox® liquid-crystal polymer (lcp) compound as well as a metal-reinforced motor hub and axis for ultimate precision. Following the approach of noctua’s a-series, the nf-a12x25 is a true all-rounder that yields superb results in all types of usage, regardless of whether it’s in low-impedance, airflow-oriented applications such as case cooling, or high-impedance, pressure-demanding scenarios such as on heatsinks and watercooling radiators. The 3-pin flx version provides 2000/1700/1350rpm speed settings via the supplied low-noise adaptors so as to give full flexibility in configuring the fan for maximum cooling capacity or near-silent acoustics. Topped off with exceptional running smoothness, noctua’s reference-class sso2 bearing, a rich bundle of accessories and 6-year manufacturer’s warranty, the nf-a12x25 is a premium-quality product through and through. Its superior efficiency, cutting-edge construction and pioneering materials make it an elite choice for the most discerning demands.next-generation performancenoctua’s 120mm fans such as the nf-f12 and nf-s12a are renowned as being among the best on the market and have received more than 400 awards and recommendations from the international press. With its further improved efficiency and novel, state-of-the-art engineering, the nf-a12x25 represents another step up in performance and manufacturing.highly optimised p/q curve for all applicationsthe nf-a12x25’s sophisticated aerodynamic design allows for a pressure to airflow (p/q) curve that is extremely strong in the critical mid-section. This means that the nf-a12x25 is a true jack-of-all-trades with excellent performance in both static pressure demanding and airflow demanding applications.excellent on-application acousticswhile many fans produce unpleasant, high-pitched noises when installed in typical applications such as on heatsinks or radiators, the nf-a12x25 has been carefully fine-tuned for optimal on-application acoustics. It produces a smooth, pleasant frequency profile and surprisingly low sound pressure levels (spl) when working against back pressure.flow acceleration channelsthe nf-a12x25 impeller features suction side flow acceleration channels. By speeding up the airflow at the crucial outer blade regions, this measure reduces suction side flow separation and thus leads to better efficiency and lower vortex noise.ultra-tight tip clearancethe nf-a12x25 has a record tight tip clearance (distance between the blade tips and the inside of the frame) of only 0.5mm. This highly ambitious design sets a new benchmark for 120mm fans and helps the nf-a12x25 to work more efficiently against back pressure, such as on heatsinks or radiators, by reducing leak flows through the gap between impeller and frame.metal-reinforced motor hubthe centrepiece of the nf-a12x25’s motor hub is made entirely from steel and the axle mount is reinforced with an additional brass structure. In combination, both measures ensure ultimate precision and increased stability in the critical hub area.sterrox® liquid-crystal polymer compoundthe nf-a12x25’s impeller is made from noctua’s novel sterrox® liquid-crystal polymer (lcp) compound that features extreme tensile strength, an exceptionally low thermal expansion coefficient and damping characteristics that are ideal for reducing resonance and vibration phenomena in advanced fan-blade designs.aao framenoctua's aao (advanced acoustic optimisation) frames feature integrated anti-vibration pads as well as noctua's proprietary stepped inlet design and inner surface microstructures, both of which further refine the fan's performance/noise efficiency.stepped inlet designnoctua's stepped inlet design adds turbulence to the influx in order to facilitate the transition from laminar flow to turbulent flow, which reduces tonal intake noise, improves flow attachment and increases suction capacity, especially in space-restricted environments.inner surface microstructureswith the tips of the fan blades ploughing through the boundary layer created by the inner surface microstructures, flow separation from the suction side of the blades is significantly suppressed, which results in reduced blade passing noise and improved airflow and pressure efficiency.integrated anti-vibration padsintegrated anti-vibration pads made from extra-soft silicone minimise the transmission of minute vibrations while maintaining full compatibility with all standard screws and other mounting systems.anti-vibration gasket for watercooling radiatorsthe nf-a12x25 includes a silicone gasket

EUR 32.90
1

Noctua NF-A12x25 ULN Premium Fan 120x25mm -tuuletin

Noctua NF-A12x25 ULN Premium Fan 120x25mm -tuuletin

The nf-a12x25 is a highly optimised next-generation 120mm fan that integrates noctua’s latest innovations in aerodynamic engineering in order to achieve an unprecedented level of quiet cooling performance. It takes state-of-the-art technologies such as the aao (advanced acoustic optimisation) frame or flow acceleration channels and combines them with a record tight tip clearance of only 0.5mm, which is made possible by using the novel sterrox® liquid-crystal polymer (lcp) compound as well as a metal-reinforced motor hub and axis for ultimate precision. Following the approach of noctua’s a-series, the nf-a12x25 is a true all-rounder that yields superb results in all types of usage, regardless of whether it’s in low-impedance, airflow-oriented applications such as case cooling, or high-impedance, pressure-demanding scenarios such as on heatsinks and watercooling radiators. The 3-pin uln version provides super-slow 1200/900rpm speed settings for ultra-low-noise applications and highly noise-sensitive users who demand near-silent acoustics. Topped off with exceptional running smoothness, noctua’s reference-class sso2 bearing, a rich bundle of accessories and 6-year manufacturer’s warranty, the nf-a12x25 is a premium-quality product through and through. Its superior efficiency, cutting-edge construction and pioneering materials make it an elite choice for the most discerning demands.next-generation performancenoctua’s 120mm fans such as the nf-f12 and nf-s12a are renowned as being among the best on the market and have received more than 400 awards and recommendations from the international press. With its further improved efficiency and novel, state-of-the-art engineering, the nf-a12x25 represents another step up in performance and manufacturing.highly optimised p/q curve for all applicationsthe nf-a12x25’s sophisticated aerodynamic design allows for a pressure to airflow (p/q) curve that is extremely strong in the critical mid-section. This means that the nf-a12x25 is a true jack-of-all-trades with excellent performance in both static pressure demanding and airflow demanding applications.excellent on-application acousticswhile many fans produce unpleasant, high-pitched noises when installed in typical applications such as on heatsinks or radiators, the nf-a12x25 has been carefully fine-tuned for optimal on-application acoustics. It produces a smooth, pleasant frequency profile and surprisingly low sound pressure levels (spl) when working against back pressure.flow acceleration channelsthe nf-a12x25 impeller features suction side flow acceleration channels. By speeding up the airflow at the crucial outer blade regions, this measure reduces suction side flow separation and thus leads to better efficiency and lower vortex noise.ultra-tight tip clearancethe nf-a12x25 has a record tight tip clearance (distance between the blade tips and the inside of the frame) of only 0.5mm. This highly ambitious design sets a new benchmark for 120mm fans and helps the nf-a12x25 to work more efficiently against back pressure, such as on heatsinks or radiators, by reducing leak flows through the gap between impeller and frame.metal-reinforced motor hubthe centrepiece of the nf-a12x25’s motor hub is made entirely from steel and the axle mount is reinforced with an additional brass structure. In combination, both measures ensure ultimate precision and increased stability in the critical hub area.sterrox® liquid-crystal polymer compoundthe nf-a12x25’s impeller is made from noctua’s novel sterrox® liquid-crystal polymer (lcp) compound that features extreme tensile strength, an exceptionally low thermal expansion coefficient and damping characteristics that are ideal for reducing resonance and vibration phenomena in advanced fan-blade designs.aao framenoctua's aao (advanced acoustic optimisation) frames feature integrated anti-vibration pads as well as noctua's proprietary stepped inlet design and inner surface microstructures, both of which further refine the fan's performance/noise efficiency.stepped inlet designnoctua's stepped inlet design adds turbulence to the influx in order to facilitate the transition from laminar flow to turbulent flow, which reduces tonal intake noise, improves flow attachment and increases suction capacity, especially in space-restricted environments.inner surface microstructureswith the tips of the fan blades ploughing through the boundary layer created by the inner surface microstructures, flow separation from the suction side of the blades is significantly suppressed, which results in reduced blade passing noise and improved airflow and pressure efficiency.integrated anti-vibration padsintegrated anti-vibration pads made from extra-soft silicone minimise the transmission of minute vibrations while maintaining full compatibility with all standard screws and other mounting systems.anti-vibration gasket for watercooling radiatorsthe nf-a12x25 includes a silicone gasket that can be used when installing the fan

EUR 32.90
1