11 resultater (0,26015 sekunder)

Vis alle filtre

Mærke

Butik

Pris (EUR)

Nulstil filter

Produkter
Fra
Butikker

Fixing Buttons - for 10mm Polycarbonate Sheets White - Box of 10

Fixing Buttons - for 10mm Polycarbonate Sheets White - Box of 10

Fixing buttons are used in conjuncion with polycarbonate sheets to keep the sheet in place. These fixings are usually used in conjunction with larger sheets and should be fixed through to timber rafters.The buttons consist of a screw and a cap inside a larger PVC circular housing which spreads the pressure and forms a watertight seal, these can also be used as a precautionary measure to avoid sheet slippage on installations.Fixing buttons are available in a box of 10 and available in both white and brown and for 10mm, 16mm or 25mm sheets.

GBP 7.04
1

Fixing Buttons - for 10mm Polycarbonate Sheets Brown - Box of 10

Fixing Buttons - for 10mm Polycarbonate Sheets Brown - Box of 10

Fixing buttons are used in conjuncion with polycarbonate sheets to keep the sheet in place. These fixings are usually used in conjunction with larger sheets and should be fixed through to timber rafters.The buttons consist of a screw and a cap inside a larger PVC circular housing which spreads the pressure and forms a watertight seal, these can also be used as a precautionary measure to avoid sheet slippage on installations.Fixing buttons are available in a box of 10 and available in both white and brown and for 10mm, 16mm or 25mm sheets.

GBP 7.04
1

Fixing Buttons - for 25mm Polycarbonate Sheets Brown - Box of 10

Fixing Buttons - for 25mm Polycarbonate Sheets Brown - Box of 10

Fixing buttons are used in conjuncion with polycarbonate sheets to keep the sheet in place. These fixings are usually used in conjunction with larger sheets and should be fixed through to timber rafters.The buttons consist of a screw and a cap inside a larger PVC circular housing which spreads the pressure and forms a watertight seal, these can also be used as a precautionary measure to avoid sheet slippage on installations.Fixing buttons are available in a box of 10 and available in both white and brown and for 10mm, 16mm or 25mm sheets.

GBP 7.04
1

Fixing Buttons - for 16mm Polycarbonate Sheets Brown - Box of 10

Fixing Buttons - for 16mm Polycarbonate Sheets Brown - Box of 10

Fixing buttons are used in conjuncion with polycarbonate sheets to keep the sheet in place. These fixings are usually used in conjunction with larger sheets and should be fixed through to timber rafters.The buttons consist of a screw and a cap inside a larger PVC circular housing which spreads the pressure and forms a watertight seal, these can also be used as a precautionary measure to avoid sheet slippage on installations.Fixing buttons are available in a box of 10 and available in both white and brown and for 10mm, 16mm or 25mm sheets.

GBP 7.04
1

Fixing Buttons - for 25mm Polycarbonate Sheets White - Box of 10

Fixing Buttons - for 25mm Polycarbonate Sheets White - Box of 10

Fixing buttons are used in conjuncion with polycarbonate sheets to keep the sheet in place. These fixings are usually used in conjunction with larger sheets and should be fixed through to timber rafters.The buttons consist of a screw and a cap inside a larger PVC circular housing which spreads the pressure and forms a watertight seal, these can also be used as a precautionary measure to avoid sheet slippage on installations.Fixing buttons are available in a box of 10 and available in both white and brown and for 10mm, 16mm or 25mm sheets.

GBP 7.04
1

Fixing Buttons - for 16mm Polycarbonate Sheets White - Box of 10

Fixing Buttons - for 16mm Polycarbonate Sheets White - Box of 10

Fixing buttons are used in conjuncion with polycarbonate sheets to keep the sheet in place. These fixings are usually used in conjunction with larger sheets and should be fixed through to timber rafters.The buttons consist of a screw and a cap inside a larger PVC circular housing which spreads the pressure and forms a watertight seal, these can also be used as a precautionary measure to avoid sheet slippage on installations.Fixing buttons are available in a box of 10 and available in both white and brown and for 10mm, 16mm or 25mm sheets.

GBP 7.04
1

Rafter Bar End Bar Self Supported - 3.5mtr White

Rafter Bar End Bar Self Supported - 3.5mtr White

Our Rafter Bar (End Bar) for a Self Support System is used to finish polycarbonate sheeting.The end bar includes an adjustable adaptor to finish off the edge of the roof without the need for an additional F section or closer.The bar is extremely robust and can be used with any sheet thickness from 16mm to 35mm supporting spans up to 6 metres.The bar comes in two parts, the sheet is laid in place on the neoprene gasket and the snap cap is pushed down into position.

GBP 132.41
1

Rafter Bar End Bar Self Supported - 2.5mtr White

Rafter Bar End Bar Self Supported - 2.5mtr White

Our Rafter Bar (End Bar) for a Self Support System is used to finish polycarbonate sheeting.The end bar includes an adjustable adaptor to finish off the edge of the roof without the need for an additional F section or closer.The bar is extremely robust and can be used with any sheet thickness from 16mm to 35mm supporting spans up to 6 metres.The bar comes in two parts, the sheet is laid in place on the neoprene gasket and the snap cap is pushed down into position.

GBP 94.63
1

Rafter Bar End Bar Self Supported - 3mtr White

Rafter Bar End Bar Self Supported - 3mtr White

Our Rafter Bar (End Bar) for a Self Support System is used to finish polycarbonate sheeting.The end bar includes an adjustable adaptor to finish off the edge of the roof without the need for an additional F section or closer.The bar is extremely robust and can be used with any sheet thickness from 16mm to 35mm supporting spans up to 6 metres.The bar comes in two parts, the sheet is laid in place on the neoprene gasket and the snap cap is pushed down into position.

GBP 113.47
1

Rafter Bar End Bar Self Supported - 4mtr White

Rafter Bar End Bar Self Supported - 4mtr White

Our Rafter Bar (End Bar) for a Self Support System is used to finish polycarbonate sheeting.The end bar includes an adjustable adaptor to finish off the edge of the roof without the need for an additional F section or closer.The bar is extremely robust and can be used with any sheet thickness from 16mm to 35mm supporting spans up to 6 metres.The bar comes in two parts, the sheet is laid in place on the neoprene gasket and the snap cap is pushed down into position.

GBP 170.59
1

Rafter Bar End Bar Self Supported - 6mtr White

Rafter Bar End Bar Self Supported - 6mtr White

Our Rafter Bar (End Bar) for a Self Support System is used to finish polycarbonate sheeting.The end bar includes an adjustable adaptor to finish off the edge of the roof without the need for an additional F section or closer.The bar is extremely robust and can be used with any sheet thickness from 16mm to 35mm supporting spans up to 6 metres.The bar comes in two parts, the sheet is laid in place on the neoprene gasket and the snap cap is pushed down into position.

GBP 234.55
1