open circuits fra GBP 252 | Se de billigste priser og tilbud på css.lazzaweb.dk

Inspection Chamber Set - 450mm Diameter x 1040mm Depth with 150mm Channel andamp; 150mm Inlets

This inspection chamber has a diameter of 450mm and is 1040mm deep. It features an open main channel with 150mm Twinwall Rocker Pipes, an additional two Sealed 150mm inlets ( cut as necessary ) at 90 degrees.Cover and Frame not included.andnbsp;Our inspection chambers allow access to drain and sewer systems for testing, inspection, maintenance and cleaning. These actions can be performed from the surface and should not require entrance into the chamber itself.KEY FEATURES andamp; BENEFITS OF THIS PRODUCTQuick and simple installationArrives factory assembled in one pieceDesign life of 60 yearsLightweight and requires no specialist equipment to liftCompatible with most UK twinwall pipe systemsGranular backfillComplies with EN 13598-2 (2009), SfA7 and Building Regulations Part H14 x 150mm twinwall inletsNOTE: This product is not supplied with a lid, which must be purchased separately. For this chamber, we would recommend either our 450mm square to round cover or 450mm chamber circular access cover.To view Turtleand#039;s installation guide for inspection chambers, click here.

GBP 336.98

1

Inspection Chamber Set - 450mm Diameter x 1560mm Depth with 150mm Channel andamp; 150mm Inlets

This inspection chamber has a diameter of 450mm and is 1530mm deep. It features an open main channel with 150mm Twinwall Rocker Pipes, an additional two Sealed 150mm inlets ( cut as necessary ) at 90 degrees.Cover and Frame not included.andnbsp;Restrictor Cap not included.Our inspection chambers allow access to drain and sewer systems for testing, inspection, maintenance and cleaning. These actions can be performed from the surface and should not require entrance into the chamber itself.KEY FEATURES andamp; BENEFITS OF THIS PRODUCTQuick and simple installationArrives factory assembled in one pieceDesign life of 60 yearsLightweight and requires no specialist equipment to liftCompatible with most UK twinwall pipe systemsGranular backfillComplies with EN 13598-2 (2009), SfA7 and Building Regulations Part H14 x 150mm twinwall inletsNOTE: This product is not supplied with a lid, which must be purchased separately. For this chamber, we would recommend either our 450mm square to round cover or 450mm chamber circular access cover.To view Turtleand#039;s installation guide for inspection chambers, click here.

GBP 379.57

1

Inspection Chamber Set - 450mm Diameter x 2020mm Depth with 150mm Channel andamp; 150mm Inlets

This inspection chamber has a diameter of 450mm and is 2020mm deep. It features an open main channel with 150mm Twinwall Rocker Pipes, an additional two Sealed 150mm inlets ( cut as necessary ) at 90 degrees.Cover and Frame not included.andnbsp;Restrictor Cap not included.Our inspection chambers allow access to drain and sewer systems for testing, inspection, maintenance and cleaning. These actions can be performed from the surface and should not require entrance into the chamber itself.KEY FEATURES andamp; BENEFITS OF THIS PRODUCTQuick and simple installationArrives factory assembled in one pieceDesign life of 60 yearsLightweight and requires no specialist equipment to liftCompatible with most UK twinwall pipe systemsGranular backfillComplies with EN 13598-2 (2009), SfA7 and Building Regulations Part H14 x 150mm twinwall inletsNOTE: This product is not supplied with a lid, which must be purchased separately. For this chamber, we would recommend either our 450mm square to round cover or 450mm chamber circular access cover.To view Turtleand#039;s installation guide for inspection chambers, click here.

GBP 422.20

1

Inspection Chamber Base - 450mm Diameter with 150mm Channel andamp; 150mm Inlets

This inspection chamber base has a diameter of 450mm and features a main twinwall channel of 150mm, an additional two 150mm inlets at 90 degrees.This inspection chamber base has a diameter of 450mm and features an open main channel with 150mm Twinwall Rocker Pipes, an additional two Sealed 150mm inlets ( cut as necessary ) at 90 degrees.Cover and Frame not included.andnbsp;Riser not IncludedOur inspection chambers allow access to drain and sewer systems for testing, inspection, maintenance and cleaning. These actions can be performed from the surface and should not require entrance into the chamber itself.andnbsp;KEY FEATURES andamp; BENEFITS OF THIS PRODUCTandnbsp;Quick and simple installationandnbsp;Arrives factory assembled in one pieceandnbsp;Design life of 60 yearsandnbsp;Lightweight and requires no specialist equipment to liftandnbsp;Compatible with most UK twinwall pipe systemsandnbsp;Granular backfill_Complies with EN 13598-2 (2009), SfA7 and Building Regulations Part H1andnbsp;4 x 150mm twinwall inletsandnbsp;andnbsp;To view Turtleand#039;s installation guide for twinwall inspection chambers,andnbsp;click here.

GBP 251.76

1

Inspection Chamber Set - 450mm Diameter x 2384mm Depth with 150mm Channel andamp; 150mm Inlets

This inspection chamber has a diameter of 450mm and is 2385mm deep. It features an open main channel with 150mm Twinwall Rocker Pipes, an additional two Sealed 150mm inlets ( cut as necessary ) at 90 degrees.Cover and Frame not included.andnbsp;Our inspection chambers allow access to drain and sewer systems for testing, inspection, maintenance and cleaning. These actions can be performed from the surface and should not require entrance into the chamber itself.KEY FEATURES andamp; BENEFITS OF THIS PRODUCTQuick and simple installationArrives factory assembled in one pieceDesign life of 60 yearsLightweight and requires no specialist equipment to liftCompatible with most UK twinwall pipe systemsGranular backfillComplies with EN 13598-2 (2009), SfA7 and Building Regulations Part H14 x 150mm twinwall inletsNOTE: This product is not supplied with a lid, which must be purchased separately. For this chamber, we would recommend either our 450mm square to round cover or 450mm chamber circular access cover.To view Turtleand#039;s installation guide for inspection chambers, click here.

GBP 561.62

1

Inspection Chamber Set - 600mm Diameter x 1020mm Depth with 110mm Channel andamp; 110mm Inlets

600mm diameter, pre-assembled inspection chamber, delivered ready to install. This model has an injection moulded chamber base with 110mm main channel socket connections including four further 110mm side inlets at 90°, 135°, 225° and 270° from the outlet at 0°.Only the main channel will be open with side inlets supplied with blanking plugs that can be easily removed as required.Our inspection chambers allow access to drain and sewer systems for testing, inspection, maintenance and cleaning. These actions can be performed from the surface and should not require entrance into the chamber itself. As part of Turtle Enviroand#039;s orange range, this chamber is designed for use in foul and surface water systems.KEY FEATURES andamp; BENEFITS OF THIS PRODUCTSingle piece, pre-assembled chambers.Durable injection moulded base - chemical and impactresistant.Stepped base - 65mm step from side to main channel.Chambers include a fall from the main inlet to the outlet tohelp promote flow.Base and five standard depths available.Access shafts are easily cut onsite to the required depth.Chambers can be installed in granular backfill.

GBP 472.54

1

Awardvindende Google Marketing Powerhouse

Mærke

Butik