56 resultater (0,28157 sekunder)

Vis alle filtre

Mærke

Vis alle

Farve

Butik

Pris (EUR)

Nulstil filter

Produkter
Fra
Butikker

Receiver R7008SB 8CH S.BUS2 FASSTest & FASST SALE

Receiver R7008SB 8CH S.BUS2 FASSTest & FASST SALE

FUTABA FPR7008SB The R7008SB receiver features bi-directional communication with a FASSTest Futaba transmitter using the S.Bus2 port. Using the S.Bus2 port an impressive array of telemetry sensors may be utilized. It also includes both standard PWM output ports and S.Bus output ports. FASSTest-2.4GHz Bidirectional Communication System S.BUS2 / S.BUS Port and 8 Channels for Conventional System Receiver R7008SB Specifications: FASSTest-2.4GHz System (18CH/12CH mode) S.BUS/S.BUS2 8-channels for conventional system (not using the USB channels) Dual Antenna Diversity Size: 24.9 x 47.3 x 14.3 mm Weight: 10.9 g Power Requirement: 3.7-7.4V Voltage Range: 3.5-8.4V Battery F/S Voltage: It sets up in the transmitter Extra voltage port: Optional External Voltage Telemetry cable and CA-RWIN-700 unit can be used FPEBB0141 (0-70VDC) * Be sure that when using ESCs regulated output the capacity of the ESC must meet your usage condition.

DKK 799.00
1

3PV Radio with R203GF 2.4GHz S/T-FHSS

3PV Radio with R203GF 2.4GHz S/T-FHSS

Futaba T3PV 3+1 Channel FHSS, S-FHSS & T-FHSS* Radio Hold the 3PV in your hand, and instantly feel how lightweight it is. Access the programming menu on the easy-to-read screen, and see how sophisticated it is. Experience the 3PV's super-fast response rate, and realize that you're in command of the system that can make a real difference on race day. You also get FHSS, S-FHSS and T-FHSS protocols, making it one of R/C's most versatile surface system. The 3PV is available with a high-voltage R203GF receiver that's an ideal match for brushless ESCs and digital servos.T3PV Features: System: FHSS, S-FHSS & T-FHSS 2.4GHZ (T-FHSS / Telemetry only available with the optional R304SB receiver) 3+1 Channels (the 4:th channel can only be used when 4WS mixing (crawlers) or Brake mixing and with a 4-channel receiver) Channel 3 can be used on SW1 (two endpoints) or at DT3 where the D/R normally is at (stepped function) 10 Model Memory 4-Character Model Name Sub-Trim (CH1-4) Channel-4 Trim (only visible if 4WS or Brake Mixing is activated) Steering Dual Rates (D/R) Steering End Point Adjustement (EPA-CH1) Throttle End Point Adjustement (EPA-CH2) Channel-3 End Point Adjustement (EPA-CH3) Channel-4 End Point Adjustement (EPA-CH4) - this is only displayed when 4WS or Brake Mixing is activated 4-Wheel-Steering / Brake Mixing (SMX) (booth mixers can't be used at the same time) Sero Reverse (CH1-4) Steering Exponential (EXP-CH1) Throttle Exponential (EXP-CH2) Throttle Fail-Safe (F/S) ABS Brakes (3- cycle speeds available) Model Data Copy Auto Power-Off after 10 minutes Low Battery Alarm: 4x AA alkaline batteries - set LBA @ 4.2V 5 cell (6V) NiMH - set LBA @ 5.0V 2S (6.6V) LiFe - set LBA @ 5.8V Available T-FHSS Telemetry Functions when using the R304SB receiver (not included): Receiver battery voltage (no sensor needed) External voltage (if this sensor is used the receiver battery voltage is not visible on the TX LCD) - SBS-01V No other telemetry sensors can be used Suitable Receivers: R203GF S-FHSS (included) R304SB T-FHSS (optional) - Use only Futaba Digital & BLS servos Optional TX Batteries: 4x AA alkaline batteries (battery holder included) YT1800A (5 Cell NiMH) HT5F1800B / FPEBA0142 (5 Cell NiMH) FT2F1700B / FPEBA0140 (2S 6.6V LiFe) FT2F2100B / FPEBA0135 (2S 6.6V LiFe) T3PV-2.4G Transmitter: FHSS/S-FHSS/T-FHSS* system Wheel type 3+1 channels (the 4th channel is used for mixing functions only) Transmitting frequency: 2.4GHz band Power requirement: Size AA Dry cell battery x 4 (6V) (or 5-cell NiMH / 2-cell LiFe) Current drain: 100mA or less Transmission antenna: 1/2 di-pole (Built-in) Receiver R203GF (included): 3 channels S-FHSS/FHSS auto detection system Power requirement: 4.8V ~7.4V battery (Dry cell battery cannot be used) Size: 39 x 26 x 10 mm (excluding a projection part) Weight: 8 g Receiver R304SB/R314SB (optional): T-FHSS system 4 channels Power requirement: 4.8V ~7.4V battery (Dry cell battery cannot be used.) Size: 35.1 x 23.2 x 8.5 mm (excluding a projection part) Weight: 6.6 g Steering, Throttle and Steering Dual Rate digital trims are conveniently positioned around the wheel for easy access. The nearby switch is for programming 3rd channel functions if needed.The large screen makes it easy to view information from the 3PV's intuitive menu.The battery compartment is accessed through the transmitter's base, and can hold 4 "AA" alkaline batteries, NiMHs (such as the Yuntong #YT1800A) or a LiFe pack (such as the Futaba #FPEBA0140).

DKK 849.00
1

Kyosho Mini-Z MR03 EVO Chassis Set (W-MM) 8500KV

Kyosho Mini-Z MR03 EVO Chassis Set (W-MM) 8500KV

Kyosho Mini-Z RWD MR-03EVO Chassis Set 32799 Frste MINI-Z MR-03 chassisst, der giver mulighed for separat ESC- og egen modtager! Inkluderer ny KYOSHO SPEED HOUSE XSPEED 85 brstels motor (8500KV).I.C.S-manageren har detaljeret styring og gasreguleringsparameterjustering samt skift mellem brstels og brstet tilstand.Drevet af uafhngige CPU'er til ESC og modtager bidrager get intern behandlingshastighed til prcisionsstyring og gasregulering.Udstyret med kuglelejer og kugledifferensst II. Nydesignet separat modtagerdksel og forreste overarmsmontering gr justering af slidbanen nemmere. Kompatibel med valgfrie dele til MR-03-chassiset. First released in December 2018 the MR-03EVO series delivered amazingly fast processing speed and featured a separate receiver board that provided the flexibility of transmitter choice. Two years after its stunning debut, the MR-03 EVO lineup has been strengthened with a race-based chassis. A 8500KV motor is combined with a standard specification chassis that you can customize to your liking with various optional parts available.While retaining the full bearing specifications and Ball Diff Set II, align the base chassis with the new standard speed range and open a wider group of users. From the compatible receiver units : RA-40 (EX-6R / EX-II / EX-RR/EX-LDT); RA-41 (KT-531P / KT-432PT); RA-42 (Futaba T7PX / T7XC / T4PM), and RA-43 (Flysky Noble NB4), the RA-41 provides the optimal step-up from the Readyset. Perhaps the MR-03EVO chassis sets greatest advantage is that it can also be combined with a brushed motor (No.MZ9E, sold separately) to adapt to an even wider range of driving conditions. First MINI-Z MR-03 Chassis Set that adopts separate ESC and receiver design.Includes new KYOSHO SPEED HOUSE XSPEED 85 brushless motor (8500KV).I.C.S manager features detailed steering and throttle parameter adjustment, as well as switching between brushless and brushed modes.Powered by independent CPUs for ESC and receiver, increased internal processing speed contributes to precision steering and throttle control.Equipped with ball bearings and Ball Diff Set II. Newly designed separate receiver cover and front upper arm mount make tread adjustment easier. Compatible with optional parts for the MR-03 chassis.

DKK 1499.00
1

Xerun XR10 Pro-Stock Spec V4 Black ESC

Xerun XR10 Pro-Stock Spec V4 Black ESC

Innovative Double-switch DesignA built-in electronic switch combined with an external detachable switch effectively helps the XR10 Stock Spec avoid some flaws of ordinary or one-switch ESCs. The internal switch makes the wiring convenient, the external switch is really handy when the car shell is installed on and the built-in switch is no longer touchable. Special Design for STOCK Class RacingReliable hardware combined with great software (contains 5 common ready-to-use profiles) creates an ideal power solution to the STOCK class of 1/10 scale touring car, buggy racing. Programming/Upgrading/Data Reading WirelesslyWith Hobbywing's "WiFi Express" module and iPhone or an Android phone (with the HOBBYWING WiFi Link software installed), the user can remotely program parameters, upgrade firmware and check relevant data of the ESC without leaving the control stand. Small Size & Light WeightThis ESC is smaller and lighter than the standard version XR10 Pro and it's the mini version of XR10 Pro 160A. The small size (31.5x25.6x16.1mm) makes the installation convenient and the light weight (only 28g w/o wires) provides more weight margin when adjusting the balance of the chassis. Super Internal BECThe built-in switch mode BEC with a maximum output of 6A and voltage adjustable between 6V and 7.4V allows the user to use various high voltage servos. Adjustable Throttle & Brake PWM FrequenciesIndependent and adjustable throttle & brake PWM frequencies guarantee precise and accurate throttle and brake control for all classes of competitions (esp. the Stock class). Data-logging CapabilityThis ESC features the data-logging function which can record the maximum ESC & motor temperatures, the minimum battery voltage, the maximum motor RPM and etc. in real time and allows users to check those data via a LCD program box or WiFi module after each use. Specifications Scale: 1/10th Brushed/Brushless: BL Sensored/Sensorless: SD Waterproof: No Cont./Peak Current: 80A/380A InputVoltage: 2S Lipo/5-7 Cell NiMH BEC Output: Switch Mode:6V/7.4V,3A Wires & Connectors Input Wires: Black-14AWG-200mm*2 Output Wires: Black-14AWG-200mm*3 Input Connectors: No Output Connectors: No (Note: All the wire length above is the original length not the length you see from the outside.) Fan Size: 20x20x8mm Voltage Range: 5-7.4V Powered by: BEC ESC Programing via SET Button on ESC: Not Supported LED Program Box: Not Supported LCD Program Box: Supported WiFi Module: Supported Program Port: Separate Program Port Firmware Firmware Upgrade: Supported Size & Weight Size: 31.5x25.6x16.1mm Weight: 54.5g (w/Wires) Applications Motors: SL BL Motors, SD BL Motors Vehicles: STOCK class of 1/10th Touring Car & Buggy Racing KV Rating/T Count: 1/10th Touring Cars=10.5T, 1/10thBuggy=13.5T Click here to look at FAQ and Software Updates for XeRun XR10 PRO STOCK SPEC

DKK 901.60
1

Traxxas TRX6553X GPS Module & Telemetri Expander 2.0

Traxxas TRX6553X GPS Module & Telemetri Expander 2.0

Traxxas TQi Telemetry Expander 2.0 and GPS Module 2.0 Conversion Kit! TRAXXAS TELEMETRY EXPANDER KIT (#6553X) FEATURES: Includes receiver data cable (optional data cables available) Installs quickly and easily; no parts to replace or swap Waterproof case keeps the expander safe from the elements Six available ports for connecting additional temperature and voltage sensors Uses GPS and GLONASS global positioning for accurate, real-time speed Speed readout not affected by gear ratio or tire-size Requires the TQi radio system with Wireless Module (#6511), TSM receiver (#6533), Apple device running iOS 7.0 or higher, or Android-equipped device with Android 4.4 and higher, and the Traxxas Link App (latest version available free on Google Play and the App Store)Expanded InnovationTraxxas telemetry changes the game by allowing you to monitor and record real-time data from your vehicle while you drive. The waterproof Telemetry Expander 2.0 includes the GPS Module 2.0 for the most accurate speed possible and accepts up to six additional auto-detectable sensors. The Traxxas Link app automatically recognizes sensors, so setup takes only a few moments! Advanced communication bus technology allows you to connect the telemetry expander to your TSM receiver or to your High-Voltage Power Amplifier, or directly to the VXL-6s and VXL-8s electronic speed controls with optional data cables. Install the Telemetry Expander, choose your sensors, and prepare for an all-new RC driving experience!Important NoteThe new GPS Module 2.0 (#6551X) and Telemetry Expander 2.0 (#6550X) replace the original Telemetry Expander (#6550) and GPS Module (#6551). The originals are not compatible with the new 2.0 versions.More info @ Traxxas!

DKK 879.00
1

Traxxas 6507R TQi Bluetooth 4-ch TX and 5-ch RX TSM

Traxxas 6507R TQi Bluetooth 4-ch TX and 5-ch RX TSM

The World's Most Advanced Ready-To-Race® Radio System Now Connects Wirelessly to the Traxxas Link AppTotal Control. Traxxas models deserve the world's most advanced Ready-To-Race® radio system. The radio system is the sole connection between the driver and machine. It has to be precise, comfortable, powerful, and reliable. The Traxxas® TQi™ radio system features a full compliment of tuning features; long-range, 4-channel versatility, high-output, 2.4GHz signal, access to real-time telemetry feedback, and proven Traxxas reliability for rock-solid performance. However, the most important and innovative feature may already be in your pocket. TQi is equipped with a revolutionary Traxxas Link Wireless Module that turns your Android or Apple iOS device into a powerful tuning tool for your Traxxas model. The full-color display combines with the Traxxas Link™ App to deliver an intuitive, high-definition, full-color graphical user interface that unlocks the mysteries of optimizing your radio system for ultimate vehicle control. The Traxxas Link Wireless Module is compatible with Android 4.4+ or Apple iOS 4.3+ platforms (see device requirements below).Traxxas Link Wireless Module Pairs TQi with Android 4.4+ or Apple iOS 4.3+ PlatformsSleek 4-Channel Transmitter Design with Internal AntennaEquipped with Traxxas Link Wireless Module for Traxxas Link App Expandability5-Channel Receiver with Traxxas Stability ManagementTraxxas Link Model Memory for up to 30 ModelsSimple 2-Button Programming InterfaceBuilt in FailsafeDirect Sequence Spread Spectrum Technology (DSSS)Uses only 4 AA BatteriesTraxxas Link Application Provides Visual Access to:Real-Time TelemetryCustomizable DashboardsSteering/throttle expoSteering/braking dual rateServo reversingEndpoint adjustmentProfile customization and sharingManage an unlimited number of models with the Traxxas Link AppAccelerate Faster/Corner Faster/Brake Harder/Stay in ControlTraxxas Stability Management (TSM) allows you to experience all the extreme power, speed, and acceleration that was engineered into your XO-1 making it much easier to control on common slippery surfaces such as dusty asphalt, smooth concrete, and even ice and snow. Punch it off the line and TSM goes to work sensing the vehicle’s direction and making steering corrections to provide straight-ahead full-throttle acceleration without fishtailing, spinouts, and loss of control. TSM also works during cornering, first making intuitive corrections to maintain your line, and then allowing you to hammer the throttle earlier in the turn for much faster exit speeds. Braking is dramatically improved as TSM works to keep you arrow straight until you come to a complete stop.Traxxas Link App       Gone are the clunky controls and blocky monochrome graphics of yesterday's radio systems. This powerful app gives you complete control over the operation and tuning of your Traxxas radio controlled model with stunning visuals and absolute precision. Install accessory Traxxas Link telemetry sensors on the model, and Traxxas Link displays real-time data such as speed, RPM, temperature, and battery voltage with brilliant graphics. Traxxas builds the world's fastest Ready-To-Race radio-controlled models. That level of performance demands precision control. Traxxas Link App gives you the tools for exacting adjustment and superior control while always keeping you informed on your model's status and speed.Use our convenient telemetry application guide to select the correct telemetry sensors for your model.TQi 2.4GHz Radio System Features:High Output signal for maximum rangeIntegrated internal antennaSimple 2-Button InterfaceSteering trim and Multi-Function knobsAdjustable steering and throttle percentage (dual rates)Adjustable steering and throttle sensitivity (exponential)Adjustable steering and throttle end pointsAutomatically stores and loads settings for up to 30 Traxxas Link Model Memory enabled models—just switch on and drive, "model selection" is not required.High 13ms frame rate and near-zero latency for responsive controlTelemetry enabled 5-channel micro receiver with dual channel-1 inputsComfortable ergonomic designNew steering wheel and foam gripOperates on just 4 AA batteriesTraxxas Stability Management Receiver (#6533) Features:Compatible with Android 4.4+ or Apple iOS 4.3+ platforms (see device requirements below)TSM makes driving more fun by allowing the driver to accelerate harder and drive faster with much greater controlTSM works to stabilize vehicles over rough surfaces as the gyro effect of the spinning front tires continues to “steer” when the vehicle is in the airTSM dramatically improves braking performance, preventing the vehicle from spinning outTSM allows faster cornering speedsTSM never restricts throttle (or fun!)TSM allows the driver to accelerate harder when exiting a turnTSM works invisibly in the backgroundThe driver maintains their

DKK 1349.00
1

SBS-02G Telemetry GPS Sensor S.BUS2

SBS-02G Telemetry GPS Sensor S.BUS2

Futaba SBS-02G - Telemetry GPS SensorThis sensor, used in conjunction with a telemetry enabled transmitter/receiver, is used to indicate the distance/ speed/ altitude of the item to which it is attached.LED indication: Green: Normal operation Green blink: GPS un-receiving Red: No signal reception Green/Red: When setting up the slot Green/Red Alternate blink: Unrecoverable error Specs: Use: GPS/Altitude sensor (from atmospheric pressure) with Vario meter Length: 175 mm Weight: 11g Voltage: DC 3.7 7.4V Frequency: 1575.42 MHz Range: Speed: About 0~500 km/h Altitude: About -700 ~ +5.500 m sensor spec Vario meter: About -150 ~ +150 m/s

DKK 1279.00
1

QuicRun Fusion Pro 2300kV w/ Integrated ESC 60A - 30120402

QuicRun Fusion Pro 2300kV w/ Integrated ESC 60A - 30120402

Hobbywing Fusion Pro 2300KV Sensored Crawler Motor with built in ESC FOC - Integrated Power System for CrawlersThree Operating Modes: Normal - Forwards & reverse with brake Normal - Forward & reverse Constant Speed - Forward & reverse Features: The integrated design of the ESC and the motor greatly reduces the overall volume and weight, and makes the layout and wiring of car frame simpler and more convenient. The FOC driving mode, low speed torque is strong. Smooth running at extreme low speed, which is far superior to the common sensored brushless power system, even better than the brushed power. Thanks to the sine wave driving mode, the whole system has high efficiency, small heat, and effectively extends the endurance time; and the motor runs more quietly and soft. The protection grade of the whole system is IP67, with excellent waterproof and dustproof performance. Under various weather conditions, the whole system can easily deal with the complex road surface containing silt, ice and snow, and water. Intelligent torque output and speed closed-loop control, fully experience the cruise control and steep slope slow descent function of 1:1 vehicle, making the control handy. Active drag brake force adjustment, providing unprecedented parking capacity on slope. With strong built-in switch mode BEC, the continuous current is up to 6A, and support switch between 6V and 7.4v, easy to drive various powerful steering servo and high-voltage steering servo. Multiple protection functions: battery low voltage protection, overheat protection, throttle lost protection, lock-up protection. It supports LED program box to set ESC parameters, and has independent parameter setting interface, which is integrated on electronic switch, making setting parameters more convenien Specifications: Type: 1/10, Brushless, Sensored, Waterproof Cont./Peak Current: 60A/200A Input Voltage: 2-3S Lipo/6-9 Cell NiMH BEC Switch Mode: 6V/7.4V,6A Motor KV: 2300 Diameter: 37mm Length: 58mmm Shaft diameter: 3.175mm Shaft Length: 16mm Motor Poles: 4 Input Wires: 14AWG / 330mm Input Connector: XT60 SET Button on ESC: Not Supported LED Program Box: Supported LCD Program Box: Not Supported WiFi Module: Not Supported Program Port: Independent programming interface (switch position) Firmware Upgrade: Not Supported Size: 37x58mm Weight: 209g (including wires & connectors) Application: 1/10 crawlers

DKK 1253.57
1

Seaking 180A V3 2-6S Watercooled Boat ESC

Seaking 180A V3 2-6S Watercooled Boat ESC

Hobbywing Seaking 180A V3 CTP Marine ESCPerformance & ReliabilityBuilt with high-quality components and coupled with cutting-edge firmware, the Seaking 180A V3 is featured by unmatched performance and reliability.Multiple safety adjustable options are in use, with the implementation of the low-voltage cutoff protection, thermal protection and throttle signal loss protection. Efficient Cooling SystemThe Hobbywing patented heat-conductive copper bar cover on the power board ofthe Seaking 180A V3 can efficiently and effectively transfer heat to the integrated CNC machined billet aluminum water cooled heat sink housing thus keepingyour ESC as cool as possible. Waterproof Design andBuilt-in BEC100% waterproof without the need of extra protection. The built-in switch mode BEC with a maximum output of 6Amp andvoltage of 6V make this ESC compatible with high voltage servo. Special Algorithm DesignThe special algorithm implemented in the ESC make the acceleration more incredible and sailing more stable. Separate PRG/FAN PortThe separate PRG/FAN port on the ESC can connect ESC to a program box (via the trio-color programming cable) and start ESC programming.Specifications: Type: Brushless Waterproof: Yes Cont./Peak Current: 180A/1080A Input: 3-6S LiPoor9-18 Cells NiMH BEC Output:Linear Mode:6V/5A Wires & Connectors: Input Wires: 10AWG - 200mm Output Wires:10AWG - 150mm Input Connectors: No Output Connectors: No ESC Programing via: Transmitter: Supported LED Program Box: Supported LCD Program Box: Not Supported WiFi Module: Not Supported Program Port:Separate Program Port Firmware: Firmware Upgrade: Not Supported Size & Weight: Size: 72 x 48 x 36.6mm I.D./O.D. of the Water Cooling Pipe: ?3.0/5.4 mm Weight: 207g Applications: Boat Length <130cm Installation & Connection Connect the ESC, motor, receiver, battery and servo according to the wiring diagram below (Picture 1/2). Three wires from the ESC to the motor have no polarity, so you can connect them freely. Please recheck all the connections and ensure they are correctly connected before proceeding to step 2. (And you may find it?s necessary to swap two wires if the motor runs in reverse.)For safety, please always keep the propeller away from human body or any other objects.Red color input wire is positive pole, Black color input wire is negative pole. 1)Picture 1 is for Seaking-30A-V3, Seaking-60A-V3 and other ESCs that work with one LiPo battery pack; that is a wiring diagram with 1 battery pack.2)Picture 2 is for Seaking-120A-V3, Seaking-180A-V3, Seaking-130A-HV-V3 (without switch) and other ESCs that may work with two LiPo battery packs; that is the wiring diagram with 2 battery packs.

DKK 991.85
1

Huson 609mm Wood Kit

Huson 609mm Wood Kit

1117 Hudson 24" Sailboat KitThis smaller version of the Huson 36 is fun to assemble and easy to sail.  You assemble the cleanly die-cut frames and then strip plank the hull with balsa wood strips. The kit contains sewn dacron sails, carbon fiber mast, and complete rigging. A two channel radio is all you need to radio control the model. You do not need a sail control unit, simply use one of the RC servos from your radio. A simple and fun way to enjoy radio controlled sailing.Length: 609 mm (24")Width: 171 mm (6.75")Mast: 787 mm (31")Sail Control Unit Use a servo from your two channel radio.

DKK 1495.00
1

QuicRun Fusion Motor 1800kV w/ Integrated ESC 40A

QuicRun Fusion Motor 1800kV w/ Integrated ESC 40A

Hobbywing QuicRun Fusion BL System for Crawler-540 Spec 1800Kv Integrated design of Hobbywing's patent technologyThe integrated design of the ESC makes the overall volume is only the size of 550 motor, and the overall weight is only 201g, which makes the layout and wiring of car frame simpler and more beautiful, perfectly solves the difficulty of wiring due to the small internal space of rock crawler.Intelligent Torque Output & Speed Closed-loop Control for Easy ControlThe Fusion system combined with Intelligent Torque output and closed loop speed control mean the power system will maintain the motor?s Torque level and RPM as the vehicles conditions change. Uphill, downhill, under load, the intelligent output torque makes the operation so simple.Note:If the?RPM/Throttle Matching?be set to ?Disabled?, no intelligent torque output & speed closed-loop control, just like brushed system.FOC (Field-oriented Control) for Super Linearity & HighTorque & Extreme MuteThe Fusion system adopts FOC driving mode, low speed torque is strong. It runs smoothly at very low speed, outstripping ordinary sensored power system, even better than brushed power system. Moreover, the motor is extremely silent when it is running. The driving noise which annoys driver disappears. It is the best choice for rock crawler.Applicable to All Weather & Track ConditionsThe IP-67 waterproof of the whole power has excellent waterproof and dust proof performance. The whole power can easily drive on the muddy, sandy, icy, snowy and water track under various weather conditions.High Driving Efficiency for Long Battery LifeThe whole power adopts FOC driving which has high efficiency and less heat, dramatically extends the Runtime time. Benefitting from the sine wave driving mode, the motor runs more silently and softlyProfessional Drag Brake Adjustments & Super Parking Capacity8 gears of drag brake force and 9 gears of drag brake rate can meet different car models, different fields and different controlling habits. The maximum drag brake force is about twice that of ordinary brushless power of the same size, providing super strong parking capacity on slope.Advanced and Secure Electronic SwitchCompare to standard on/off switches, the dust, dirt, and waterproof electronic switch housing ensures a long reliable life for your power system, will not suffer from the problems that reed stuck and contact rust frequently happened in dusty and damp environment, and the problem that mechanical switch closes automatically caused by fierce impact.Specs: Type: Brushless/Sensored/Waterproof Scale: 1/10 Cont./Peak Current: 40A/160A Input Voltage: 2-3S Lipo / 6-9 Cell NiMH BEC Output: 6V/7.4V adjustable, continuous current 4A (Switch mode) Motor KV: 1800KV Diameter/length of Motor: 36mm/64mm Shaft diameter / exposed shaft length: 3.175mm/16mm Motor Poles: 4 Input Wires: 14AWG 200mm Input Connector: XT60 Size: 36 x 64mm Weight: 201g Vehicles: 1/10 Rock Crawlers ESC Programing via: SET Button on ESC: Not Supported LED Program Box: Supported LCD Program Box: Not Supported WiFi Module: Not Supported Program Port :Independent programming interface (switch position): Firmware Upgrade: Not Supported

DKK 1199.00
1

8485 LED Light set Complete Desert Racer

8485 LED Light set Complete Desert Racer

Pro-Scale High Intensity LED Light Kit for Unlimited Desert Racer Pro-Scale RealismFlood the desert with brilliant white light with the new High Intensity LED Off-Road Light Kit for the Traxxas Unlimited Desert Racer. Traxxas innovation delivers features, performance, and detailed scale looks not found on any other lighting system. The included Traxxas High Voltage Amplifier packs the muscle to efficiently power the 204 individual LEDs in the kit while minimizing losses from excessive current and heat. The tightly regulated output provides stable lighting performance, without flickering or dimming as the battery voltage changes. In another Traxxas first, the smart brake lights work when brakes are applied in both forward and reverse directions. This eliminates the common and annoying problem with generic aftermarket systems that turn on the brake lights while reversing.DESERT RACER LED LIGHT KIT(#8485) INCLUDES: Dual straight LED bumper-mounted LED light bars (52 LEDs each) Curved roof light bar (52 LEDs) Multifunction red and amber brake light/class light bar (24 red and 24 amber LEDs) High-voltage 8-channel power amplifier for intense, brilliant LED lighting Regulated output for stable lighting performance (no flickering or dimming as the battery voltage changes) Wiring is simple: Plug the main connector from the power amplifier into the power port on the Traxxas VXL-6s Electronic Speed Control, and then plug the individual lighting modules into the power amplifier. Switch between three manual lighting modes on the power amplifier (such as high beam and low beam), or use the Traxxas Link app and Wireless Module (#6511*) to control individual lights remotely and create custom lighting configurations. Of course, since its from Traxxas, this powerful, feature-rich system is rugged and fully waterproof for all of your exciting RC adventures.High-Voltage PowerRather than draw valuable power away from the BEC, the power amplifier uses the Power Port on the VXL-6s ESC to tap power directly from the batteries. The power amplifier transforms and regulates battery current to for reliable high-power performance. TechnologyThree different lighting modes on the amplifier let you control which lights illuminate. Use the Traxxas Link App* to further customize the lighting modes to your specifications or turn the lights on and off directly in the app. The kit includes all mounting hardware to make installation a breeze. The LED Light Bar Kit comes as a complete set or as individual components allowing Desert Racer owners to select the exact setup to meet their needs.QUICK FEATURES ON DESERT RACER LED LIGHT KIT(#8485) A Traxxas first! Fully functioning brake lights that work in both forward and reverse direction Fully waterproof Three default lighting modes controlled from the power amplifier Low and high beam brightness settings Easy to install with simplified, concealed, color-coded wiring Expandable Firmware updatable through the app App-controlled lighting functions* Turn lights on/off remotely Build a custom dashboard Customize lighting configurations and actions Add additional lighting components

DKK 1099.00
1

TRX7885 LED Light Kit X-Maxx

TRX7885 LED Light Kit X-Maxx

High Intensity LED Light Kit for X-MaxxRugged InnovationThe X-Maxx LED Light Kit is the only light kit worthy of the X-Maxx name. Built to handle brutal real-world punishment, this light kit is waterproof and built Traxxas Tough for maximum fun. Blaze a path through the night with this intense-white high-output LED light kit.Traxxas innovation delivers features and performance not found on any other lighting system. The included high voltage amplifier packs the muscle to efficiently power both high-power light bars in the kit while minimizing losses from excessive current and heat. The tightly regulated output provides stable lighting performance, without flickering or dimming as the battery voltage changes. In another Traxxas first, the smart brake lights work when brakes are applied in both forward and reverse directions. This eliminates the common and annoying problem with generic aftermarket systems that turn on the brake lights while reversing.X-MAXX LED LIGHT KIT (#7885) INCLUDES: High-output bumper mounted LED light bar Multi-function rear LED light bar High-voltage 8-channel power amplifier for intense, brilliant LED lighting Regulated output for stable lighting performance (no flickering or dimming as the battery voltage changes) Breakaway cable helps to prevent damage when removing body Light bar mounts and wiring connectors Wiring is simple: Plug the main connector from the power amplifier into the power port on the Traxxas VXL-8s Electronic Speed Control, and then plug the individual lighting modules into the power amplifier. Switch between three manual lighting modes on the power amplifier (such as high beam and low beam), or use the Traxxas Link app and Wireless Module (#6511*) to control individual lights remotely and create custom lighting configurations. Of course, since its from Traxxas, this powerful, feature-rich system is rugged and fully waterproof for all of your exciting RC adventures.High-Voltage PowerRather than draw valuable power away from the BEC, the power amplifier uses the Power Port on the VXL-8s ESC to tap power directly from the batteries. The power amplifier transforms and regulates battery current to for reliable high-power performance.TechnologyCustomize your setup with three different lighting modes on the amplifier. Use the Traxxas Link App* to further customize the lighting modes to your specifications or turn the lights on and off directly in the app. The kit includes all mounting hardware to make installation a breeze. The LED Light Bar Kit comes as a complete set or as individual components allowing X-Maxx owners to select the exact setup to meet their needs.QUICK FEATURES ON X-MAXX LED LIGHT KIT (#7885) A Traxxas first! Fully functioning brake lights that work in both forward and reverse direction Fully waterproof Three default lighting modes controlled from the power amplifier Low and high beam brightness settings Easy to install with simplified, concealed, color-coded wiring Expandable Firmware updatable through the app App-controlled lighting functions* Turn lights on/off remotely Build a custom dashboard Customize lighting configurations and actions Add additional lighting components LED Configuration with Traxxas Link App *Requires Traxxas Link App (available in the Apple App Store or on Google Play)and TQi transmitter with the Traxxas Link Wireless Module (part #6511, sold separately).

DKK 779.00
1

Pro Boat Jet Jam 12" RTR Pool Racer

Pro Boat Jet Jam 12" RTR Pool Racer

Pro Boat Jet Jam 12" RTR Pool Racer Den selvoprettende Pro Boat Jet Jam er en af de fedeste bde p markedet. Den er perfekt til en dag ved sen eller en eftermiddag ved poolen. Uanset om solen skinner eller det regner, kan du sejle Jet Jam p lavt vand (s lidt som 10cm!) eller p dybere omrder. Alt ved denne bd er designet til sjov. Og med en jetpumpe og uden blotlagt propel tilbyder Jet Jam en sikker oplevelse for alle. Den har endda en gummikofanger for at forhindre delagte skrog eller skader p siden af din pool. Vi har ogs tilfjet en aftagelig kop foran, s du kan spille pool-fodbold mod dine venner! Bare tilfj en bordtennisbold eller en hvilken som helst anden flydende bold. Specifikationer for Pro Boat Jet Jam 12" RTR Pool Racer Omtrentlig monteringstid: Ingen samling pkrvet Bredde: 4,5 tommer (114,3 mm) Frdighedsniveau: Klar-til-Kr Drive: System Jet Drive Skroghjde: 3 tommer (76,2 mm) Skrogmateriale: Sprjtestbt ABS Motor Strrelse: 390 Brstet Produktlngde: 12 tommer (304,8 mm) Produktvgt: 1 lb (0,5 kg) Radio: inkluderet Modtager: medflger Skala: 12 tommer Hastighedskontrol: inkluderet Styrende Jet Drive Trimskema farver orange/hvid med 3 mrkatmuligheder Type Deep-V Medflger til Pro Boat Jet Jam 12" RTR Pool Racer: Pro Boat Jet Jam12-tommer RTR Pool Racer Pro Boat 2.4GHz Pistol Grip Transmitter Pro Boat ESC/Receiver Pro Boat Servo Dynamite 7.4 1500 mAh 2S 15C Li-Ion-batteri Pro Boat USB-oplader BrugervejledningPRB08031-Manual-EN.pdf Du mangler til Pro Boat Jet Jam 12" RTR Pool Racer: Intet, alt medflger.

DKK 799.00
1

Pro Boat Jet Jam 12" RTR Pool Racer

Pro Boat Jet Jam 12" RTR Pool Racer

Pro Boat Jet Jam 12" RTR Pool Racer Den selvoprettende Pro Boat Jet Jam er en af de fedeste bde p markedet. Den er perfekt til en dag ved sen eller en eftermiddag ved poolen. Uanset om solen skinner eller det regner, kan du sejle Jet Jam p lavt vand (s lidt som 10cm!) eller p dybere omrder. Alt ved denne bd er designet til sjov. Og med en jetpumpe og uden blotlagt propel tilbyder Jet Jam en sikker oplevelse for alle. Den har endda en gummikofanger for at forhindre delagte skrog eller skader p siden af din pool. Vi har ogs tilfjet en aftagelig kop foran, s du kan spille pool-fodbold mod dine venner! Bare tilfj en bordtennisbold eller en hvilken som helst anden flydende bold. Specifikationer for Pro Boat Jet Jam 12" RTR Pool Racer Omtrentlig monteringstid: Ingen samling pkrvet Bredde: 4,5 tommer (114,3 mm) Frdighedsniveau: Klar-til-Kr Drive: System Jet Drive Skroghjde: 3 tommer (76,2 mm) Skrogmateriale: Sprjtestbt ABS Motor Strrelse: 390 Brstet Produktlngde: 12 tommer (304,8 mm) Produktvgt: 1 lb (0,5 kg) Radio: inkluderet Modtager: medflger Skala: 12 tommer Hastighedskontrol: inkluderet Styrende Jet Drive Trimskema farver orange/hvid med 3 mrkatmuligheder Type Deep-V Medflger til Pro Boat Jet Jam 12" RTR Pool Racer: Pro Boat Jet Jam12-tommer RTR Pool Racer Pro Boat 2.4GHz Pistol Grip Transmitter Pro Boat ESC/Receiver Pro Boat Servo Dynamite 7.4 1500 mAh 2S 15C Li-Ion-batteri Pro Boat USB-oplader BrugervejledningPRB08031-Manual-EN.pdf Du mangler til Pro Boat Jet Jam 12" RTR Pool Racer: Intet, alt medflger.

DKK 799.00
1

QuicRun WP 8BL150 V2 CTP Sensorless ESC 3-6S 1/8

QuicRun WP 8BL150 V2 CTP Sensorless ESC 3-6S 1/8

QuicRun WP 8BL150 - Brushless Sensorless 1/8 ESC This ESC is specially designed for new beginners and intermediate modelers; it not only carries forward the outstanding quality of HOBBYWING products butsimplifies the operation.Applicable to All Weather ConditionsThe waterproof and dust-proof design allows the QUICRUN WP-8BL50 to be used in all weather conditions without any issue of damage caused to the ESC from water or dust.High Reliability & DurabilityReliable hardware combined with advanced software technology allows the QUICRUN 8BL50 to not only provide high power output but also overload protection of the ESC circuit.Efficient Cooling SystemHobbywing patented heat-conductive copper bar cover on the power board of the QUICRN WP-8BL50, which can efficiently and effectively transfer heat to the integrated CNC machined billet aluminum heat sink housing, combined with reticulate heatsink and high-performance cooling fan can keep your ESC as cool as possible.Built-in BECThe built-in switch mode BEC with a maximum output of 8Amp and voltage of 6V make this ESC compatible with various servosSingle-button Programming & Factory ResetThe SET button on the ESC allows the user to easily program or factory reset the ESC with ease.Features: External programming port, easy to connect to the LED Program Card (purchase separately) when setting the ESC Proportional brake with 4 steps of maximum brake force adjustment and 8 steps of drag brake force adjustment. 9 steps of acceleration (/punch) adjustment from ?soft? to ?Very aggressive? to fit for different kinds of models, tires and tracks.? Multiple protections: Low voltage cut-off protection / Over-heat protection / Throttle signal loss protection / Motor lock-up protection. One-button (the ?SET? button on the ESC) to set the ESC, and easy to reset all parameters to the factory default settings. Compatible with the optional device ---- the portable Digital LED Program Card, especially convenient for outdoor use.?? Specs: Type: Brushless Sensorless Continuous/Peak Current: 150A/950A Input: 3-6S LiPo BEC: Switch Mode: 6V 3A Input Wires: 10AWG 150mm Motor Wires: 12AWG 100mm Input Connectors: No Motor Connectors: 4mm gold bullet female Size: 59.5 x 48 x 42 mm Weight: 178g ESC Programing via: SET Button on ESC: Supported LED Program Box: Supported LCD Program Box: Not Supported WiFi Module: Not Supported Applications: Motors: Sensorless Brushless / Sensored Brushless (only in SL mode) Vehicles: 1/8th Touring Cars/Buggies/Trucks/Monster Trucks KV Rating/T Count: 4S LiPo: KV=3000 6S LiPo: KV=2400(40XX Series of Motors) Programmable Items:Installation:

DKK 979.00
1

EzRun MAX8 V3 150A ESC 1/8 XT90-plug

EzRun MAX8 V3 150A ESC 1/8 XT90-plug

Hobbywing EzRun MAX8 V3 150A Brushless Sensorless 1/8 ESC with XT90 Plugs High Reliability & DurabilityReliable hardware combined with advanced software allows the ESC to not only provide extremely high output but also protect itself timely from damages caused by overload. It significantly reduces the possibility of getting damaged by heavy load and improves the reliability and durability.Great Flexibility & VersatilityThe ESC has strong outbreak and stable output, so vehicle can do different moves without a problem, no matter aggressive start-up and wheelie, 720-degree flips, high speed running on straight tracks or flying over slopes. It always provide the power more than sufficient. Besides, driver can adjust relevant parameters for smooth and soft start-up.Applicable to All Weather ConditionsOutstanding waterproof and dust-proof capability makes the ESC applicable to all weather conditions, no matter the track is covered with dust, gravel, snow or puddles.Super Built-in BECThe worlds first 1/8th scale ESC adopted the super built-in BEC with the max. output current of up to 15A and switchable output voltage (6V/7.4V). It can drive different servos, high voltage servos at ease and bring amazing control feel to drivers.Advanced and Secure Electronic SwitchThe electronic switch with the lifespan of over 50000 times of switching on & off features a completely waterproof, dust-proof and shock-resistant design, completely solved problems like stuck reed and rust contact points caused by dust and moisture, switching off automatically caused by violent dash (like landing after flying over slopes) conventional mechanical switches often have.Almost Maintenance FreeThe whole ESC except the cooling fan is basically maintenance free. Besides, the fan has also adopted the special anti-shock design, reduced damage brought by frequent jumps of the vehicle, greatly reduced maintenance work to the fan.Specs: Type: 1/8 Brushless, Sensored 1/8 Truck ESC Waterproof: Yes Cont./Peak Current: 150A/950A Input Voltage: 3-6S LiPo BEC Switch Mode: 6V/7.4V, 6A Input Wires: 10AWG-200mm Output Wires: 10AWG-200mm Input Connectors: XT90 (dual) Output Connectors: 6.5mm Famale Gold Connectors (pre-soldered onto the PCB) Fan Size: 30x30x10mm Fan Voltage Range: 5-7.4V Fan Powered by BEC Size: 59.8x48.0x36.8mm Weight: 174g ESC Programing via: SET Button on ESC: Supported LED Program Box: Supported LCD Program Box: Supported WiFi Module: Supported Program Port: FAN/Program Port Firmware Upgrade: Supported Applications: Motors: Sensorless Brushless Motors (or Sensored Motors in Sensorless mode) Vehicles: 1/8 Touring Car/Buggy/Truck

DKK 1199.00
1

GYD550 Gyro High-end Car Drifting

GYD550 Gyro High-end Car Drifting

Futaba GYD550 - RC Car Counter-Steer Gyro System GYD550 is a advanced gyro system designed to be used with 1/10th scale slick, carpet, and all drift surfaces. Having features such as SR Mode for superior response, and user adjustable parameters accessible WIRELESSLY with the T7PX/R on version 7.0 the set-up and tuning abilities are limitless.Take your drift to the next level with AVCS technology Drifting has never been smoother, in control, and easy for beginners. You tell the car where to go, dont let it control you!Wireless features require T-FHSS and R334SBS/E updated to version 4.0.Features: Dedicated RC Drift car setting: Vehicle straight-line and cornering performance can be increased without taking into account the effect of the road surface, etc. Remote gain function and mode switching function: You can adjust gain from the transmitter (3 or more CH) by using the remote gain function. The mode switching function allows AVCS/NORMAL gyro mode switching. Integrated, compact, and light weight: Compact size22.6x19.6x11 mmand light weight5.6 grealized by high density mounting technology. Aluminium case: The GYD550 is equipped with a robust and highly rigid aluminum case. Supporting the S.BUS/S.BUS2 connection: Only one wire connection to the receiver can operate the GYD550. Only for Futaba digital servos GYD550 Ratings:(Integrated sensor type gyro) Gyro sensor: MEMS vibrating structure gyro Operating voltage: DC 3.5-8.4 V Current drain: 30 mA (excluding a servo) Operating temperature range: -10 C to +45 C Dimensions: 22.6 x 19.6 x 11.0 mm (except protrusion) Weight: 5.6 g Functions: LED monitor Servo selection (SR mode) S.BUS/S.BUS2 connection Video afGYD550

DKK 1045.00
1

EzRun Combo MAX10 SCT - 3660SL 3200kV 2-3S 1/10

EzRun Combo MAX10 SCT - 3660SL 3200kV 2-3S 1/10

EzRun MAX10-SCT ESC & 3660SL-G2-3200KV Combo Set This is a brushless Hobbywing EzRun combo set made for 1/10 scale Short Course Trucks and high performance fun!EzRun 3660SL-G2-3200Kv Motor Specifications: Type: 1/10, Bruhsless, Sensorless Motor Poles: 4 KV Rating: 3200 LiPo Cells: 2-3S Shaft Diameter: 5mm Outer Diameter: 36mm Length: 60mm Weight: 262g Ballbearings: ID5 x OD13 x T4 mm EzRun MAX10-SCT ESC Specifications: Type: 1/10, Brushless, Sensorless Waterproof: Yes Cont./Peak Current: 120A/830A Input: 2-3S LiPo (in this combo set) BEC Output (Switch Mode): 6V/7.4V,4A Input Wires: 12AWG-200mm Output Wires: 12AWG-200mm Input Connectors: No Output Connectors: 4mm Bullet Connectors (Female) Cooling Fan: yes Size: 49 x 39.5 x 34.7mm Weight: 105g ESC Programing via: SET Button on ESC: Supported LED Program Box: Supported LCD Program Box: Supported WiFi Module: Supported Program Port: FAN/Program Port Firmware Upgrade: Supported Applications: Vehicles: 1/10 Short Course Trucks / Trucks / Monster Trucks KV Rating/T Count: 2S LiPo: KV=6000, 3S LiPo: KV=4000, 4S LiPo: KV=3000 (36XX Series of Motors)

DKK 1299.00
1

Airbrush Compressor 16HP 3L - HNAS186A

Airbrush Compressor 16HP 3L - HNAS186A

This is an air compressor that fits most airbrushes with up to 0.8 mm nozzles and that don''t consume more then 20-23L of air per minute.Features: Can be used for most custom airbrush paint work, model building and other hobbies etc. Oil-free piston type compressor. This allows the compressor to be quiet without atomizing oil into the air stream, wich makes the compressor virtually maintainance free. Air tank for smooth air flow and zero air pulsing Air regulator with pressure gauge, moisture trap filter and adjustable air pressure Auto-start and auto-stop function Steel cover Dual airbrush holders Thermal overload switch Low noise level: 47dB Air tank safety release valve Specifications: Single cylinder piston compressor with air tank and auto-stop / auto-stop function Power: 1/6 HP Speed: 1450/1700 RPM Noise Level: 47dB Max Air Flow: 20-23 litre/minute Auto Start at: 3 BAR (43 PSI) Auto Stop at: 4 BAR (57 PSI) Air Pressure Adjustable Range: 0-4 BAR Air Tank: 3 litre Suitable Airbrush Nozzles: 0.2-0.8 mm Air Outlet Thread: G1/8 (BSP) male Size: L317 x W140 x H360 mm Weight: 8.2 kg

DKK 977.00
1