428 resultater (0,34686 sekunder)

Mærke

Butik

Pris (EUR)

Nulstil filter

Produkter
Fra
Butikker

Brodit Bordstativ med strømkapel til Honeywell Dolphin 70e Black - 215693

Brodit Aktiv Holder med cigaradaptor til Microsoft Surface Duo 2/Duo - 721226

Brodit Aktiv Holder med cigaradaptor til Microsoft Surface Duo 2/Duo - 721226

#html-body [data-pb-style=FDTXC1O]{justify-content:flex-start;display:flex;flex-direction:column;background-position:left top;background-size:cover;background-repeat:no-repeat;background-attachment:scroll}Active holder with USB-cable and cig-plug adapterCig-plug adapter with 2 USB ports: QC 3.0A + 2.4A. With tilt swivel. Fits devices both open and folded. Can be used with or without original bumper. With fly lead.Keep your phone's battery fully charged in an active holder, always within easy sight and reach! Neat, discreet and convenient. Custom made with a perfect, firm fit. With USB-cable with cig-plug adapter, choose to connect either to the vehicle's USB outlet or the 12/24V socket. The cig-plug adapter has two USB ports: QC 3.0A + 2.4A. You have full access to the camera and all buttons when the device is in the holder. It is easy to slide the device into place in the holder and to take it out of the holder when leaving the car. You need to connect the charging device to the device manually each time you put the device in the holder.Important note!For Microsoft Surface Duo 2 can you only have the device in open position.The holder is equipped with a tilt swivel so you can easily adjust the angle for better viewing, or switch between portrait and landscape mode. Tilts 17° and swivels 360°. Mounting plate 42x50 mm with 4 mm AMPS-holes. Made of high grade black ABS/Acetal plastic. Made in Sweden. Attach onto a ProClip mounting platform.Important note!In order to be able to transmit audio files from your device through the USB-cable, this feature must be supported by the stereo in your car. You can easily test if this works by connecting your device to the stereo with the USB/charging cable that comes with your device. Charging through USB works regardless.Fits the following models:Microsoft Surface Duo 2 Microsoft Surface Duo 

DKK 1189.00
1

Brodit Passiv Holder til Zebra ET85 og Zebra ET80 - 216297

Brodit Passiv Holder med fjederlås til Getac F110 6th Gen - 741287

Brodit Passiv Holder med lås og nøgler til Getac F110 6th Gen - 739287

Brodit Passiv Holder med lås og nøgler til Getac F110 6th Gen - 739287

#html-body [data-pb-style=BWFGY9V]{justify-content:flex-start;display:flex;flex-direction:column;background-position:left top;background-size:cover;background-repeat:no-repeat;background-attachment:scroll}Holder with key-lockPassive holder. Fits devices with and without handstrap. With AMPS, Vesa 75/100 holes. 2 keys included.This holder is the perfect choice when you want to have your device securely locked in place and still easy accessible. The holder is made of extra strong plastic and is equipped with a lock. In order to remove the device from the holder you need a key (two keys are included). Attach the holder to any flat surface or a Pedestal Mount in a truck, distribution vehicle, warehouse etc. You have full access to the camera and all buttons and outlets when the device is in the holder. Made of high grade ABS/Acetal plastic. Color: black. Made in Sweden.Devices should not be installed onto a vehicle's dashboard if blocking the view or key controls. An installation of a device in a vehicle is always done on the customer's own responsibility.Firmly in place and easily accessibleThis product features a spring stud lock that keeps the device extra securely in place. Locked into place and easily accessibleThis product features a key lock that keeps the device secured in the holder until the lock is released (2 keys included). For use any where when you need to leave your device unattended, such as shops, counters, trucks, exhibitions, events, boats etc.Fits the following modelsGetac F110 6th Gen  

DKK 1059.00
1

Brodit Passiv Holder med fjederlås til Logic Instrument Fieldbook N101 - 741241

Brodit Aktiv Holder med kugleled OnePlus 7, OnePlus 6T, OnePlus 6 - 727076

Brodit Aktiv Holder med kugleled OnePlus 7, OnePlus 6T, OnePlus 6 - 727076

#html-body [data-pb-style=B4QQJUD]{justify-content:flex-start;display:flex;flex-direction:column;background-position:left top;background-size:cover;background-repeat:no-repeat;background-attachment:scroll}Active holder for fixed installationArt.727076With tilt swivel. Fits for devices with skin; adjustable top.Use an active holder for your device on the road and you will always have a freshly charged battery! In addition, you will always have your device within easy sight and reach. Safe, comfortable and convenient! The active holder is to be connected inside the dashboard. It provides an elegant installation without any cables hanging over the interior. The holder has a neat and discreet design which blends well with the vehicle's interior. Your device is held securely in place in an upright position for maximum cellular reception. Fits devices with skin. The top part of the holder is adjustable and adapts to the height of your phone.   When you place the device in the holder, it automatically connects to the charging unit. 12 Volt. The product is E-approved. Connect the power cable with a 2 A fuse. Professional installation recommended.     The holder has a perfect fit. It is easy to put the device into the holder, and just as easy to take it with you when leaving the vehicle. The holder is equipped with a tilt swivel so you can adjust the angle of your device in order to avoid light reflection on the screen. You can tilt the holder 17° in each direction. Attach onto ProClip Mounting Platform.Fits for:OnePlus 7OnePlus 6TOnePlus 6

DKK 1009.00
1

Brodit Bordstander til Honeywell CT60 og Honeywell CT50 - 215930

Brodit Passiv Holder med lås og nøgler til Honeywell RT10 - 739285

Brodit tilbehør til Zebra TC78 og Zebra TC73 - 216304

Brodit Aktiv Holder med cigaradaptor til M3 Mobile SM20-series, M3 Mobile SM15-series og M3 Mobile SM10-series - 712036

Brodit Aktiv Holder med cigaradaptor til Zebra TC25 og Zebra TC20 - 712029

Brodit Aktiv Holder med cigaradaptor til Samsung Galaxy Xcover Pro SM-G715 - 721214

Brodit Aktiv Holder med cigaradaptor til Samsung Galaxy Xcover Pro SM-G715 - 721214

#html-body [data-pb-style=PA6XO85]{justify-content:flex-start;display:flex;flex-direction:column;background-position:left top;background-size:cover;background-repeat:no-repeat;background-attachment:scroll}Active holder with USB-cable and cig-plug adapterWith USB-cable + cig-plug adapter with 2 USB ports: QC 3.0A + 2.4A. Fits for device with OtterBox uniVERSE case. Charging via pogo pins. With easy-switch system. With tilt swivel. 12/24 Volt.  Keep your phone's battery fully charged in an active holder, always within easy sight and reach! Neat, discreet and convenient. Custom made with a perfect, firm fit for device with OtterBox uniVERSE case. With USB-cable with cig-plug adapter, choose to connect either to the vehicle's USB outlet or the 12/24V socket. The cig-plug adapter has two USB ports: QC 3.0A + 2.4A. You have full access to the camera and all buttons when the device is in the holder. It is easy to slide the device into place in the holder so it connects to the pogo pin charging, and to take it out of the holder when leaving the car.The holder is equipped with a tilt swivel so you can easily adjust the angle for better viewing, or switch between portrait and landscape mode. Tilts 17° and swivels 360°. Mounting plate 42x50 mm with 4 mm AMPS-holes. Made of high grade black ABS/Acetal plastic. Made in Sweden. Attach onto a ProClip mounting platform or Pedestal mount.Easy-switching system:The easy-switching system enables you to upgrade the holder only, and keep the installed cables. It saves you a lot of time! When upgrading to a new device, you do not longer need to make a full installation. Same goes for maintenance in case of warranty or damage. You simply disconnect the holder from the charging cable via the Molex 6-pin quick connector, and then connect the new holder. The switch is done in a few seconds.Important note!In order to be able to transmit audio files from your device through the USB-cable, this feature must be supported by the stereo in your car. You can easily test if this works by connecting your device to the stereo with the USB/charging cable that comes with your device. Charging through USB works regardless.Fits the following models:Samsung Galaxy Xcover Pro SM-G715 

DKK 809.00
1

Brodit Aktiv Holder med cigaradaptor til Unitech PA720 - 521981

Brodit Aktiv Holder med cigaradaptor til Unitech PA720 - 521981

#html-body [data-pb-style=MIR67WL]{justify-content:flex-start;display:flex;flex-direction:column;background-position:left top;background-size:cover;background-repeat:no-repeat;background-attachment:scroll}Active holder with USB-cable and cig-plug adapterKeep your device's battery fully charged in an active holder, always within easy sight and reach! Neat, discreet and convenient. Custom made with a perfect, firm fit. With USB-cable with cig-plug adapter, choose to connect either to the vehicle's USB outlet or the 12/24V socket. You have full access to the camera and all buttons when the device is in the holder. It is easy to slide the device into place in the holder so it connects to the charging, and to take it out of the holder when leaving the car.The holder is equipped with a tilt swivel so you can easily adjust the angle for better viewing, or switch between portrait and landscape mode. Tilts 20° and swivels 360°. Mounting plate 42x50 mm with predrilled AMPS-holes +2x3,5 mm centered holes. Made of high grade black ABS/Acetal plastic. Made in Sweden. Attach onto ProClip Mounting Platform.Important note!In order to be able to transmit audio files from your device through the USB-cable, this feature must be supported by the stereo in your car. You can easily test if this works by connecting your device to the stereo with the USB/charging cable that comes with your device. Charging through USB works regardless.Dimensions: 87 x103 x 71 mm (W x H x D mm)Weight: 177 gCable length (+connector with plug 60 mm): 149 cmThis product supports Qualcomm QC 2.0 quick charge (provided the device supports Qualcomm QC 2.0 quick charge).Fits the following modelsUnitech PA720 

DKK 789.00
1

Brodit Aktiv Holder med faststrøm og kugleled til Samsung Galaxy S20 Ultra 5G (SM-G988B) og Samsung Galaxy Note 20 Ultra 5G - 727218

Brodit Aktiv Holder med faststrøm og kugleled til Samsung Galaxy S20 Ultra 5G (SM-G988B) og Samsung Galaxy Note 20 Ultra 5G - 727218

#html-body [data-pb-style=KDTKEJI]{justify-content:flex-start;display:flex;flex-direction:column;background-position:left top;background-size:cover;background-repeat:no-repeat;background-attachment:scroll}Active holder for fixed installationArt.727218With tilt swivel. Fits for devices with skin; adjustable top.Use an active holder for your device on the road and you will always have a freshly charged battery! In addition, you will always have your device within easy sight and reach. Safe, comfortable and convenient! For fixed installation. The holder is to be connected inside the dashboard, providing an elegant installation without any cables hanging over the interior. The charging box has two USB ports: QC 3.0A + 2.4A. You have full access to the camera and all buttons when the device is in the holder. Fits devices with skin. The top part of the holder is adjustable and adapts to the height of your phone.   The holder has a perfect fit. It is easy to put the device into the holder, and just as easy to take it with you when leaving the vehicle. The holder is equipped with a tilt swivel so you can adjust the angle of your device in order to avoid light reflection on the screen. You can tilt the holder 17° in each direction. Attach onto ProClip Mounting Platform.Important note!For Samsung Galaxy Note 20 Ultra 5G can you have problem with some settings in the camera.Fits for:Samsung Galaxy S20 Ultra 5G (SM-G988B)Samsung Galaxy Note 20 Ultra 5G

DKK 1009.00
1

Brodit Passiv Holder med fjederlås til Athesi E12 - 741080

Brodit Passiv Holder med fjederlås til Logic Instrument Fieldbook K122 - 741022

Brodit Aktiv Holder med cigaradaptor til Bluebird EF500R - 521921

Brodit Aktiv Holder med topstøtte og kugleled til Motorola TC75/TC70, Zebra TC77/TC75/TC72/TC70 - 560857

Brodit Passiv Holder med lås og nøgler til Logic Instrument Fieldbook N101 - 739241

Brodit Aktiv Holder med kugleled til Motorola TC55, Symbol TC55 og Zebra TC55 - 560605

Brodit Passiv Holder med fjederlås og kugleled til Athesi E8 - 741082

Brodit Passiv Holder med fjederlås til Getac RX10 - 541861

Brodit Passiv Holder med fjederlås til Getac RX10 - 541860

Brodit Justerbar Aktiv Holder med kugleled - 721070

Brodit Justerbar Aktiv Holder med kugleled - 721070

#html-body [data-pb-style=NUX4MNV]{justify-content:flex-start;display:flex;flex-direction:column;background-position:left top;background-size:cover;background-repeat:no-repeat;background-attachment:scroll}Active holder with USB-cable and cig-plug adapterArt.721070Adjustable holder. USB Type C. USB-cable with cig-plug adapter. With tilt swivel and fly lead. Fits devices with or without skin/case, with height 120-150 mm, max thickness 25 mm.This holder is crash tested and approved for use with device without skin/case on Brodit's headrest mount.Measure your device/skin/case and compare with specifications. For devices with/without skin/case with height 120-150 mm, max thickness 25 mm. For use with devices with USB Type C connector.USB or 12/24V. You manually connect the charging cable to the device when needed (not automatic charging when placed in holder). Tilts 20°, swivels 360°. Padded cushions for protection against sliding/scratching. Mounting plate 42x50 mm, predrilled AMPS-holes +2x3,5 mm centered holes. Made of high grade black ABS/Acetal plastic. Made in SwedenCrash tested:This adjustable holder is crash tested according to standard for car seats (ECE R17). The crash test applies for a tablet that weighs 490 g. The tests have been performed on one seat with invisible headrest pins (type Volvo etc.) and one seat with visible headrest pins (type Ford etc.) in the forward and rearward directions. The adjustable holder keeps the tablet in place during all executed tests.Important information:Tablets should not be installed onto a car’s dashboard. They may block the view or key controls and the ProClip is designed for installation of smaller devices. Brodit will not give any recommendations for such installations. An installation of a tablet onto a vehicle’s dashboard is always done on the customer’s own responsibility. Brodit recommends to use tablets in a holder on the car’s headrest, installed onto a Brodit headrest mount.Note:To transmit audio files from a device through the USB cable, this feature must be supported in the stereo. Test your stereo by connecting your device with the USB/charging cable that comes with your device. Charging through USB works regardless.This product supports Qualcomm QC 3.0 quick charge (provided the device supports Qualcomm QC 3.0 quick charge).

DKK 889.00
1