18 resultater (0,21633 sekunder)

Vis alle filtre

Mærke

Butik

Pris (EUR)

Nulstil filter

Produkter
Fra
Butikker

FloPlast Gutter Universal Top Rafter Bracket

FloPlast Gutter Universal Top Rafter Bracket

This top rafter bracket is generally used on properties where there is no fascia board at the eaves (often referred to as open eaves).The rafter bracket is screwed onto the top of the foot of the rafter at the eaves. A standard fascia bracket is then attached to the vertical section of the rafter arm using the small nut and bolt supplied.The fascia bracket can then be adjusted up or down to ensure that the correct fall is achieved on the gutter.

GBP 8.39
1

FloPlast Deepflow/ Hi-Cap Downpipe Shoe - 80mm Black

FloPlast Deepflow/ Hi-Cap Downpipe Shoe - 80mm Black

The shoe is the fitting used at the bottom of the downpipe when it is not being connected to a drainage pipe or gully.The shoe should be angled so that the open section faces away from the building.Installation is a simple push fit joint. If pedestrian traffic close to the fitting is likely then the shoe can be secured in place with silicon sealant or solvent weld, although we would recommend the push fit option as it allows easy removal for cleaning.

GBP 5.94
1

FloPlast Square Downpipe Shoe with Fixing Lugs - 65mm Black

FloPlast Square Downpipe Shoe with Fixing Lugs - 65mm Black

The shoe is the fitting used at the bottom of the downpipe when it is not being connected to a drainage pipe or gully.The shoe should be angled so that the open section faces away from the building.Installation is a simple push fit joint. If pedestrian traffic close to the fitting is likely then the shoe can be secured in place with silicon sealant or solvent weld, although we would recommend the push fit option as it allows easy removal for cleaning.

GBP 4.51
1

FloPlast Gutter Universal Side Rafter Bracket

FloPlast Gutter Universal Side Rafter Bracket

This side rafter bracket is generally used on properties where there is no fascia board at the eaves (often referred to as open eaves).The rafter bracket is screwed onto the side of the foot of the rafter at the eaves. A standard fascia bracket is then attached to the vertical section of the rafter arm using the small nut and bolt supplied.The fascia bracket can then be adjusted up or down to ensure that the correct fall is achieved on the gutter.

GBP 8.39
1

FloPlast Deepflow/ Hi-Cap Downpipe Shoe - 80mm White

FloPlast Deepflow/ Hi-Cap Downpipe Shoe - 80mm White

The shoe is the fitting used at the bottom of the downpipe when it is not being connected to a drainage pipe or gully.The shoe should be angled so that the open section faces away from the building.Installation is a simple push fit joint. If pedestrian traffic close to the fitting is likely then the shoe can be secured in place with silicon sealant or solvent weld, although we would recommend the push fit option as it allows easy removal for cleaning.

GBP 5.94
1

FloPlast Deepflow/ Hi-Cap Downpipe Shoe - 80mm Brown

FloPlast Deepflow/ Hi-Cap Downpipe Shoe - 80mm Brown

The shoe is the fitting used at the bottom of the downpipe when it is not being connected to a drainage pipe or gully.The shoe should be angled so that the open section faces away from the building.Installation is a simple push fit joint. If pedestrian traffic close to the fitting is likely then the shoe can be secured in place with silicon sealant or solvent weld, although we would recommend the push fit option as it allows easy removal for cleaning.

GBP 5.94
1

FloPlast Square Downpipe Shoe with Fixing Lugs - 65mm White

FloPlast Square Downpipe Shoe with Fixing Lugs - 65mm White

The shoe is the fitting used at the bottom of the downpipe when it is not being connected to a drainage pipe or gully.The shoe should be angled so that the open section faces away from the building.Installation is a simple push fit joint. If pedestrian traffic close to the fitting is likely then the shoe can be secured in place with silicon sealant or solvent weld, although we would recommend the push fit option as it allows easy removal for cleaning.

GBP 4.51
1

FloPlast Mini Gutter Downpipe Shoe - 50mm Black

FloPlast Mini Gutter Downpipe Shoe - 50mm Black

The shoe is the fitting used at the bottom of the downpipe when it is not being connected to a drainage pipe or gully.The shoe should be angled so that the open section faces away from the shed or building.Installation is a simple push fit joint. If pedestrian traffic close to the fitting is likely then the shoe can be secured in place with silicon sealant or solvent weld, although we would recommend the push fit option as it allows easy removal for cleaning.

GBP 6.17
1

FloPlast Mini Gutter Downpipe Shoe - 50mm White

FloPlast Mini Gutter Downpipe Shoe - 50mm White

The shoe is the fitting used at the bottom of the downpipe when it is not being connected to a drainage pipe or gully.The shoe should be angled so that the open section faces away from the shed or building.Installation is a simple push fit joint. If pedestrian traffic close to the fitting is likely then the shoe can be secured in place with silicon sealant or solvent weld, although we would recommend the push fit option as it allows easy removal for cleaning.

GBP 6.17
1

FloPlast Mini Gutter Downpipe Shoe - 50mm Brown

FloPlast Mini Gutter Downpipe Shoe - 50mm Brown

The shoe is the fitting used at the bottom of the downpipe when it is not being connected to a drainage pipe or gully.The shoe should be angled so that the open section faces away from the shed or building.Installation is a simple push fit joint. If pedestrian traffic close to the fitting is likely then the shoe can be secured in place with silicon sealant or solvent weld, although we would recommend the push fit option as it allows easy removal for cleaning.

GBP 6.17
1

FloPlast Drainage Universal Waste Adaptor - 110mm

FloPlast Drainage Universal Waste Adaptor - 110mm

The 110mm Drainage Universal Waste Adaptor connects all types of waste pipe to 110mm underground drainage.Simply push the fins of the drainage adaptor inside the 110mm soil or drainage pipe and cut the top of the adaptor as required with a sharp knife. Push the waste pipe inside the open end where you have made the cut.You can use this fitting to introduce any type of plastic waste pipe (32-50mm) into a drainage system. Please note that waste pipes should always incorporate a trap to prevent drain smells from entering the building.

GBP 5.86
1

Rainsmart Soakaway Crate Inspection/Access Plate - Heavy 65 Plate

Rainsmart Soakaway Crate Inspection/Access Plate - Heavy 65 Plate

You may want to create a linear access channel within your tank in order to give you a greater control in the maintenance of your tank. This channel can then be used to catch any sediment or debris that enters the tank. The channel can then be flushed out and cleaned.This Rainsmart 65 tonne heavy inspection plate can be used in situations where this is needed.In order to create your inspection plate, you just need to cut out the widest template to leave the open plate needed to create an inspection channel. There will be no compromise on load distribution or compressive strength of the modules.Use the inspection plate in place of all small plates within the row of the channel across the whole of the tank. This clear access channel will allow for continual and future maintenance by providing total linear access.

GBP 4.80
1