13 resultater (4,87477 sekunder)

Vis alle filtre

Mærke

Butik

Pris (EUR)

Vis alle

Nulstil filter

Produkter
Fra
Butikker

KREG Custom Plug Cutter Drill Guide Kit

KREG Custom Plug Cutter Drill Guide Kit

- Custom Plug Cutter Drill Guide Kit to create standard-sized , Mikro-Pocket and Heavy-Duty plugs (standard Plug Cutter Drill Guide Bit included) that blend perfectly into your pocket-hole projects. Insert the plug cutter drill guide block into your Kreg® 700-Series Pocket-Hole Jig, then use the plug-cutting drill bit to create custom plugs from your desired material for a perfekt match. Drill guide for use only with 700-Series Pocket-Hole Jigs.

DKK 844.00
1

KREG MortiseMate Loose Tenon Jig

KREG MortiseMate Loose Tenon Jig

- Cut mortises (loose tenon joinery) with just a drill Tenons available in 6 mm, 8 mm, and 10 mm thicknesses Auto-indexing step-down mechanism lowers cutter tip in 1/16" increments Quick setup for panels and 90-degree joints Micro adjustment screws allow for customizable mortise width Integrated mini work surface for quick and secure workpiece clamping Precise, consistent mortise depth control Fits workpieces 1/2" to 1 1/2" thick Carbide-tipped 6 mm Mortising Cutter included Laser-etched markings on the cutter make it quick and easy to position the stop collar for commonly used mortise depths, with adjustability for custom tenon fitting 8 mm and 10 mm cutters also available

DKK 3346.00
1

KREG HD Plug Cutting Bit

KREG HD Plug Cutting Bit

- The HD (Heavy Duty) Cutting Bit works with the Custom Pocket-Hole Plug Cutter to create plugs that perfectly match your project. This specially designed bit chucks into any drill, and fits into the hardened-steel drill guide in the Plug Cutter to produce plugs in the correct diameter to fit Kreg Jig® HD (Heavy-Duty) pocket holes. A stop collar ensures perfect drilling depth to produce accurately sized plugs. Open design and enlarged inside diameter provide clearance around plug for easier drilling special fluting reduces heat and friction for better plugs and longer bit life and multi-tooth cutting tip shears cleanly to produce smooth, consistent plugs.

DKK 613.00
1

KREG Micro Plug Cutting Bit

KREG Micro Plug Cutting Bit

- The Micro Plug Cutting Bit works with the Custom Pocket-Hole Plug Cutter to create plugs that perfectly match your project. This specially designed bit chucks into any drill, and fits into the hardened-steel drill guide in the Plug Cutter to produce plugs in the correct diameter to fit Micro-Pocket Kreg Jig® pocket holes. A stop collar ensures perfect drilling depth to produce accurately sized plugs. Open design and enlarged inside diameter provide clearance around plug for easier drilling, special fluting reduces heat and friction for better plugs and longer bit life and multi-tooth cutting tip shears cleanly to produce smooth, consistent plugs.

DKK 613.00
1

KREG Propbor Standard Plug Cutting Bit

KREG Propbor Standard Plug Cutting Bit

- The Standard Plug Cutting Bit works with the Custom Pocket-Hole Plug Cutter to create plugs that perfectly match your project. This specially designed bit chucks into any drill, and fits into the hardened-steel drill guide in the Plug Cutter to produce plugs in the correct diameter to fit standard-size Kreg Jig® pocket holes. A stop collar ensures perfect drilling depth to produce accurately sized plugs. Open design and enlarged inside diameter provide clearance around plug for easier drilling special fluting reduces heat and friction for better plugs and longer bit life and multi-tooth cutting tip shears cleanly to produce smooth, consistent plugs.

DKK 600.00
1

KREG Spindle motors Adapter 43 mm

KREG Spindle motors Adapter 43 mm

- Product information "Spindle motors Adapter 43 mm"By means of this adapter a mounting adapter for the router lifts, motors such as Suhner and Kress can now be used perfectly on previous lift constructions. Perfect holding force due to perfect form closure. No routing depth loss, simple cutter change above the table top. - Genuinely Made in Germany!Technical data:Clamping neck Ø 43 mm/ Tolerances of the motor neck -0,135 + 0,015Required clamping height of the motor: 20 mmMax. Weight of the motor: 5 kgNOTE: Use is only permitted in combination with RL1.0 or RL2.0.Not suitable for RL2.0-MINIFurther advantages and characteristics:No loss of routing depth!Easiest cutter change thanks to the spindle and collet still looking out from above!Quality from Germany - first-class, solid construction. Construction made of high-quality steel.Installation made easy - Simple installation of the adapter on the milling lift (installation instructions enclosed).No need to drill your own holes - mounting holes for quick installation are already provided.Approved motors:Kress: 530 FM, 800 FME, 1050 FMEMAFELL: FM 1000SUHNER: UAC 30 RF, UAD 25 RF, UAK 30 RF, UAL 23 RFIf your motor is not listed, please check the tolerances of the clamping neck to your model as specified by the manufacturer or contact us.Not approved: Trend T4EK

DKK 515.00
1

KREG Overfræser lift "Precision Router Lift"

KREG Overfræser lift "Precision Router Lift"

- Product information "Precision Router Lift"Product details:Quality made in Germany: construction made of high-quality aluminium and steel.Height fine adjustment to 1/10mm: extremely precise adjustment, with exact scaling and effective spindle lock, easily operated via hexagon socket screw.Smooth-running spindle columns: allow for continuous and exact fine height adjustment.Routing without rip fence: 2 drill holes for the rip fence pin enable free routing of e.g. round workpieces without rip fence.Easy mounting: mount the router to the RL2.0K using pre-drilled mounting holes (hole pattern in operating instructions).Absolutely flat: easy levelling of the RL2.0K by means of levelling screws in the insert plate.Laser scaling: millimeter scale on the surface for exact alignment of the rip fence.No need to drill your own holes: mounting holes (countersunk head) for quick router table installation are already pre-drilled.Special feature of the 2nd generation:The magnetic reduction plates offer more choice and control in choosing the right hole size. Perfectly adapted to the size of the router cutter - especially for small workpieces, "getting stuck and stuck" at the edge of the hole is eliminated.Magnets for attaching additional accessories are distributed over the entire reduction plate.Additional recessed grip for easy changing of the reduction plates.Compatible Routers:Bosch: POF1200AE, POF1300, POF1400ACE , GOF1250CE/LCE, GMF1600CE, GOF1600CECasals: CT2200VCEDeWalt: DW615, DW621, DW622, DW624, DW625, DWE627KT-QSElu: MOF96(E), MOF97(E), MOF131, MOF177(E), MOF 177/02 Type 2Festool: OF1400Freud: FT2000 (Diabolo), FT2200VCEMafell: LO 65 ECMakita: RP1110Perles: OF3-808(RE), OF9(E)Trend: T5, T10, T11Würth: OF1100EExceptions: ELU MOF 96/02 (no tapped holes available), Festool OF2000, OF2200 and DeWalt DW626 (these are too large in the entire circumference and cannot be fitted into the lift construction).Technical Data:Dimension insert plate: 298 x 235 x 9 mmCorner radius of insert plate: 6 mmDistance from the top edge of the inlay plate to the base plate of the mounted router: 15 mm (loss of routing depth)Height adjustment travel/rotation: 4 mmHeight router lift (max. extended): 240mmMax. cutter diameter: 86 mmMax. adjustment travel: 105 mmWeight: 4,5 kgDelivery includes:1x router lift RL2.02x reduction plates Ø 32 and 68 mm1x hexagon screwdriver 5x150 mm4x fixing screws M6x50, washers and nuts18x mounting screws (various sizes)8x levelling screws M5x81x instruction manual (german & english)

DKK 3750.00
1

KREG Boreguide til skjult hængsel Concealed Hinge Jig

KREG Boreguide til skjult hængsel Concealed Hinge Jig

- Make cabinet door installation easy! Get drill press accuracy with any hand drill.Bore Clean, Perfect Holes for Concealed Door HingesThe Concealed Hinge Jig takes the guesswork out of installing cabinet doors using concealed hinges. This economical, easy-to-use jig ensures accurate hinge alignment, so you can install doors that fit great and work well. Plus, the Concealed Hinge Jig works with an ordinary drill and the included carbide tipped bit.The Concealed Hinge Jig allows you to drill cup holes for concealed cabinet door hinges (sometimes called “Euro hinges”) using just a drill. The jig positions an included carbide-tipped bit exactly at the proper position and offset, and drills to the perfect depth every time thanks to a depth stop collar. The jig is simple to use, and it ensures that you can mount cabinet doors that fit great and work properly.Concealed hinges are great for mounting cabinet doors because they stay out of sight, they’re adjustable, and they work very well. Mounting them, though, requires drilling a large hole at a very specific position and depth. The Kreg Concealed Hinge Jig takes the guesswork out of drilling those holes, and allows you to do it with nothing more than a drill and the carbide-tipped bit that comes with the jig. The Concealed Hinge Jig consists of a glass-filled nylon base with a hole that receives a drill guide. Indexing cams ensure that the jig positions the bit to drill a hole at the required offset—which is dictated by each hinge—and a built-in stop collar ensures that the cup depth is correct every time. There are even holes that you can use to guide a bit for hinge screw holes. The Concealed Hinge Jig comes with a high-quality, carbide tipped bit to ensure great results.The Concealed Hinge Jig is designed to be intuitive for beginners to use, but robust enough for professionals. Just pick out your hinges, look up a few basic mounting instructions that come with them, and then set up the Concealed Hinge Jig by adjusting a pair of built-in cams. After that, you’re set to drill hinge cup holes using any ordinary drill. Whether you’re installing one cabinet door or making doors for an entire kitchen, the Concealed Hinge Jig provides reliable, consistent results.Technical Specifications:- Hinge Compatibility 35mm cup-style concealed hinges- Construction Durable glass-filled nylon- Hinge Offset 3mm, 4mm, 5mm, 6mm- Hinge Offset from Door End50mm (2") to unlimited- Included 35mm drill Bit. Four-cutter carbide-tipped with stop collarIncludes(1) jig base with index cams(1) drill guide(1) 35mm carbide-tipped drill bit(1) stop collar with Hex wrench(1) owner’s manualNote: A 1.5mm bit is required to drill for hinge-mounting screws. Not included.

DKK 349.00
1