20 results (0,14143 seconds)

Show all filters

Brand

Merchant

Price (EUR)

Reset filter

Products
From
Shops

C-Tec QT636 Quantec Interface Unit with Remote Socket

C-Tec QT636 Quantec Interface Unit with Remote Socket

C-Tec QT636 Quantec Interface Unit with Remote SocketAllows any device with a normally open or normally closed 6.35mm 14 inch jack plug to be connected to Quantec. Particularly suited for use with our NC805MD Portable Movement Detector nooperation QT644 Floor Pressure mat nooperationQT633 Bed Exit mat ncoperationor QT634 Chair ExitMat nc operation. Must be wired as a slave to a QT602 or QT609 range addressable call point or QT630 dementia care controller.Key FeaturesWhen thedevice connected to the QT636 is operated a call will be generated on the Quantec call system as programmed.Mounts on a standard UK 25mm single gang back box.

GBP 47.92
1

C-Tec QT609M Quantec Call Point with Magnetic Reset No Remote Sockets

C-Tec QT609M Quantec Call Point with Magnetic Reset No Remote Sockets

C-Tec QT609M Quantec Call Point with Magnetic Reset No Remote SocketsA programmable Quantec addressable call point. Includes a Call button Resetbuttonand redgreen confidence light. Can make up to 5levels of call - Standard Ensuite Help Required Emergency Presence Attendance dependent on configuration and ancillary devices used. Attack and Attendance calls can also be made if connected to compatible slave infrared receiver.Key FeaturesCan be programmed to operate in a multitude of ways using a QT423 configurator.Connections provided for additional slave devices such as ceiling pulls overdoor lights slave infrared receivers and more.Magnetic reset version.

GBP 51.25
1

C-Tec QT609 Quantec Call Point with Button Reset No Remote Sockets

C-Tec QT609 Quantec Call Point with Button Reset No Remote Sockets

C-Tec QT609 Quantec Call Point with Button Reset No Remote SocketsA programmable Quantec addressable call point. Includes a Call button Resetbuttonand redgreen confidence light. Can make up to 5levels of call - Standard Ensuite Help Required Emergency Presence Attendance dependent on configuration and ancillary devices used. Attack and Attendance calls can also be made if connected to compatible slave infrared receiver.Key FeaturesCan be programmed to operate in a multitude of ways using a QT423 configurator.Connections provided for additional slave devices such as ceiling pulls overdoor lights slave infrared receivers and more.QT609M magnetic reset version also available.

GBP 47.26
1

C-Tec CFP Relay Output Card Reset Fault Aux amp Remote Relay Outputs CFP762

C-Tec CFP Relay Output Card Reset Fault Aux amp Remote Relay Outputs CFP762

C-Tec CFP Relay Output Card Reset Fault Aux Remote Relay Outputs CFP762An optional system expansion device for use withCFP Standard 2-8 Zone Fire PanelsorCFP AlarmSense 2-8 Zone Fire Panels.Key FeaturesProvides four panel-controlled volt free relay outputs reset fault aux. fire and remote.PCB mounts inside the CFP fire panel.Reset relay is active during the panels reset cycle.Fault relay is active in any fault condition. This relay is failsafe and normally energised - if power is removed from the panel the relay will changeover to produce a fault signal.Aux. fire relay is active in an alarm condition provided all relevant delays have expired.Remote relay is active during any Alarm Condition provided all relevant delays have expired.Outputs are NOT designed to switch mains voltages.

GBP 46.63
1

C-Tec NC802DERM Conventional Infrared Call Point with Magnetic Reset and Remote Socket

C-Tec NC802DERM Conventional Infrared Call Point with Magnetic Reset and Remote Socket

C-Tec NC802DERM Conventional Infrared Call Point with Magnetic Reset and Remote SocketA button operated call point which comes with an infrared receiver capable of generating Standard and Emergency calls on an 800 Series Call System. Includes a magnetic reset target that requires an NC803M magnetic reset key to operate.Onboard infrared receiver will accept Standard Emergency calls from compatible 800 Series infrared transmitters. Calls can also be made by activating the call points CALL button to make a Standard call and the call points CALL RESET target together for an emergency call.Key FeaturesIncludes a6.35mm jack plug socket for the connection of an optional tail call lead or other ancillary calling deviceRed reassurance LED confirms a call has been madeOnboardmagentic reset target cancels Standard and Emergency calls made from the NC802DEWM and Standard calls made from other devices on the same zoneCan be connected to up to 3 NC302RXCS slave infrared ceiling receivers to increase coverageMounts on a standard UK 25mm single gang flush or surface back box

GBP 63.59
1

C-Tec QT609RSM Quantec Call Point Magnetic Reset with Sounder and Infrared Receiver No Remote Sockets

C-Tec QT609RSM Quantec Call Point Magnetic Reset with Sounder and Infrared Receiver No Remote Sockets

C-Tec QT609RSM Quantec Call Point Magnetic Reset with Sounder and Infrared Receiver No Remote SocketsA programmable Quantec addressable call point cw infrared receiver and call follower sounder. Includes a Call button Resetbuttonand redgreen confidence light. Onboard infrared receiver accepts calls from compatible Quantecinfrared transmitters. Can make up to 7 levels of call - Standard Ensuite Help Required Emergency Attack Presence Attendance dependent on configuration and ancillary devices used.Key FeaturesCan be programmed to operate in a multitude of ways using a QT423 configurator.Connections provided for additional slave devices such as ceiling pulls overdoor lights slave infrared receivers and more.Call follower sounder can be optionally used to inform staff that other calls are waiting when the system is in Night modesee Technical Specifications for further details.Magnetic reset version.

GBP 65.51
1

C-Tec QT609RS Quantec Call Point Button Reset with Sounder and Infrared Receiver No Remote Sockets

C-Tec QT609RS Quantec Call Point Button Reset with Sounder and Infrared Receiver No Remote Sockets

C-Tec QT609RS Quantec Call Point Button Reset with Sounder and Infrared Receiver No Remote SocketsA programmable Quantec addressable call point cw infrared receiver and call follower sounder. Includes a Call button Resetbuttonand redgreen confidence light. Onboard infrared receiver accepts calls from compatible Quantecinfrared transmitters. Can make up to 7 levels of call - Standard Ensuite Help Required Emergency Attack Presence Attendance dependent on configuration and ancillary devices used.Key FeaturesCan be programmed to operate in a multitude of ways using a QT423 configurator.Connections provided for additional slave devices such as ceiling pulls overdoor lights slave infrared receivers and more.Call follower sounder can be optionally used to inform staff that other calls are waiting when the system is in Night modesee Technical Specifications for further details.QT609RSM magnetic reset version also available.

GBP 62.71
1

C-Tec NC887D Conventional Switchable Sounder

C-Tec NC887D Conventional Switchable Sounder

C-Tec NC887D Conventional Switchable SounderThe NC887D can be connected to any multi-zone 800 Series Call Controller or MasterIndicator Panel to increase call indication levels.Key FeaturesIndicates Standard calls via a constant tone and Emergency calls via a pulsing toneCan beswitched off when not required e.g. during night shifts to reduce call indication levelsCan control up to twoNC888D remote soundersWhen switched OFF a red reassurance LED will illuminateas a warning

GBP 53.72
1

C-Tec NC302RXC Conventional Infrared Master Ceiling Receiver

C-Tec NC302RXC Conventional Infrared Master Ceiling Receiver

C-Tec NC302RXC Conventional Infrared Master Ceiling ReceiverA ceiling-mountable infrared receiver that will accept Standard Emergency calls from compatible 800 Series infrared transmitters. Can receive line-of-sight infrared signals from around 10m away dependent on physical conditions and environmental factors.Key FeaturesRed reassurance LED confirms a call has been made.Can be connected to up to three NC302RXCS slave infrared ceiling receivers to increase coverage in long corridors large rooms etc.Requires a separate remote reset point such as our NC802DB button reset NC809DM magnetic reset or NC899IRR keyswitch reset points for cancelling calls.Mounts on a standard UK 25mm single gang flush or surface back box.

GBP 50.45
1

C-Tec QT602EM Quantec Euro Call Point with Magnetic Reset

C-Tec QT602EM Quantec Euro Call Point with Magnetic Reset

C-Tec QT602EM Quantec Euro Call Point with Magnetic ResetA programmable addressable call point cw iconised label and remote jack socket for use with C-TECsQuantec Addressable Call System. Includes a Call button Resetbuttonand redgreen confidence light. Can make up to 5levels of call - Standard Ensuite Help Required Emergency Presence Attendance dependent on configuration and ancillary devices used. Attack and Attendance calls can also be made if connected to compatible slave infrared receiver.Key FeaturesRemote socket allows the connection of optional tail call leads pressure mats etc.Can be programmed to operate in a multitude of ways using a QT423 configurator.Connections provided for additional slave devices such as ceiling pulls overdoor lights slave infrared receivers and more.Magnetic reset version.

GBP 52.49
1

C-Tec QT602 Quantec Call Point with Button Reset

C-Tec QT602 Quantec Call Point with Button Reset

C-Tec QT602 Quantec Call Point with Button ResetA programmable addressable call point cw remote jack socket for use with C-TECsQuantec Addressable Call System. Includes a Call button Resetbuttonand redgreen confidence light. Can make up to 5levels of call - Standard Ensuite Help Required Emergency Presence Attendance dependent on configuration and ancillary devices used. Attack and Attendance calls can also be made if connected to compatible slave infrared receiver.Key FeaturesRemote socket allows the connection of optional tail call leads pressure mats etc.Can be programmed to operate in a multitude of ways using a QT423 configurator.Connections provided for additional slave devices such as ceiling pulls overdoor lights slave infrared receivers and more.QT602M magnetic reset version also available.

GBP 47.93
1

C-Tec QT602E Quantec Euro Call Point with Button Reset

C-Tec QT602E Quantec Euro Call Point with Button Reset

C-Tec QT602E Quantec Euro Call Point with Button ResetA programmable addressable call point cw iconised label and remote jack socket for use with C-TECsQuantec Addressable Call System. Includes a Call button Resetbuttonand redgreen confidence light. Can make up to 5levels of call - Standard Ensuite Help Required Emergency Presence Attendance dependent on configuration and ancillary devices used. Attack and Attendance calls can also be made if connected to compatible slave infrared receiver.Key FeaturesRemote socket allows the connection of optional tail call leads pressure mats etc.Can be programmed to operate in a multitude of ways using a QT423 configurator.Connections provided for additional slave devices such as ceiling pulls overdoor lights slave infrared receivers and more.QT602EM magnetic reset version also available.

GBP 52.49
1

C-Tec QT602ERSM Quantec Euro Call Point with Sounder IR Receiver and Magnetic Reset

C-Tec QT602ERSM Quantec Euro Call Point with Sounder IR Receiver and Magnetic Reset

C-Tec QT602ERSM Quantec Euro Call Point with Sounder IR Receiver and Magnetic ResetA programmable Quantec addressable call point cw iconised label infrared receiver call follower sounder and remote jack socket. Includes a Call buttonResetbuttons and redgreen confidence light. Onboard infrared receiver accepts calls from compatible Quantecinfrared transmitters. Can make up to 7 levels of call - Standard Ensuite Help Required Emergency Attack Presence Attendance dependent on configuration and ancillary devices used.Key FeaturesRemote socket allows the connection of optional tail call leads pressure mats etc.Can be programmed to operate in a multitude of ways using a QT423 configurator.Connections provided for additional slave devices such as ceiling pulls overdoor lights slave infrared receivers and more.Call follower sounder can be optionally used to inform staff that other calls are waiting when the system is in Night modesee Technical Specifications for further details.Magnetic reset version.

GBP 66.88
1

C-Tec QT602RS Quantec Call Point with Sounder IR Receiver and Button Reset

C-Tec QT602RS Quantec Call Point with Sounder IR Receiver and Button Reset

C-Tec QT602RS Quantec Call Point with Sounder IR Receiver and Button ResetA programmable Quantec addressable call point cw infrared receiver call follower sounder and remote jack socket. Includes a Call button Resetbuttonand redgreen confidence light. Onboard infrared receiver accepts calls from compatible Quantecinfrared transmitters. Can make up to 7 levels of call - Standard Ensuite Help Required Emergency Attack Presence Attendance dependent on configuration and ancillary devices used.Key FeaturesRemote socket allows the connection of optional tail call leads pressure mats etc.Can be programmed to operate in a multitude of ways using a QT423 configurator.Connections provided for additional slave devices such as ceiling pulls overdoor lights slave infrared receivers and more.Call follower sounder can be optionally used to inform staff that other calls are waiting when the system is in Night mode.QT602RSM magnetic reset version also available.

GBP 61.07
1

C-Tec QT602ERS Quantec Euro Call Point with Sounder IR Receiver and Button Reset

C-Tec QT602ERS Quantec Euro Call Point with Sounder IR Receiver and Button Reset

C-Tec QT602ERS Quantec Euro Call Point with Sounder IR Receiver and Button ResetA programmable Quantec addressable call point cw iconised label infrared receiver call follower sounder and remote jack socket. Includes a Call buttonResetbuttons and redgreen confidence light. Onboard infrared receiver accepts calls from compatible Quantecinfrared transmitters. Can make up to 7 levels of call - Standard Ensuite Help Required Emergency Attack Presence Attendance dependent on configuration and ancillary devices used.Key FeaturesRemote socket allows the connection of optional tail call leads pressure mats etc.Can be programmed to operate in a multitude of ways using a QT423 configurator.Connections provided for additional slave devices such as ceiling pulls overdoor lights slave infrared receivers and more.Call follower sounder can be optionally used to inform staff that other calls are waiting when the system is in Night modesee Technical Specifications for further details.QT602ERSM magnetic reset version also available.

GBP 66.88
1

C-Tec CFP763 Relay Output Card as per CFP762 8 outputs per zone relays

C-Tec CFP763 Relay Output Card as per CFP762 8 outputs per zone relays

C-Tec CFP Relay Output Card as per CFP762 8 outputs per zone relays CFP763An optional system expansion device for use withCFP Standard 2-8 Zone Fire PanelsorCFP AlarmSense 2-8 Zone Fire Panels.Key FeaturesProvides four panel-controlled volt free relay outputs reset fault aux. fire and remote and eight output per zone relays.PCB mounts inside the CFP fire panel.Reset relay is active during the panels reset cycle.Fault relay is active in any fault condition. This relay is failsafe and normally energised - if power is removed from the panel the relay will changeover to produce a fault signal.Aux. fire relay is active in an alarm condition provided all relevant delays have expired.Remote relay is active during any Alarm Condition provided all relevant delays have expired.Output per zone relays will changeover when the corresponding zone is in alarm subject to certain conditions - for full details refer to the instructions downloadable below.Outputs are NOT designed to switch mains voltages.

GBP 67.02
1

C-Tec 24V 1.5A 5 Series Encased Power Supply PCB ONLY BF560-24E

C-Tec 24V 1.5A 5 Series Encased Power Supply PCB ONLY BF560-24E

C-Tec 24V 1.5A 5 Series Encased Power Supply PCB ONLY BF560-24EThe BF560-24E can be optionally customised to suit your exact requirements using a BF423 configurator and PC. Configurable parameters includeFloat voltage temperature compensation Battery charge rate mA Battery impedance Configurable InputOutputsettings.Key FeaturesApowerful switch modedigital hybrid PSU that can be customised to suit your exact requirementsPlasticcoveron PSU PCB guards against touching live parts to VDE 0100-410Includes the same electronics as our BF560-24LPCBcertified EN54-4A2 boxed 24V 1.5A PSUMetal base platefacilitatesstraightforwardmountinginside third-party OEMenclosuresIncludes a single-pole volt-free changeover relay that switches for any fault conditionIncludes afault type hazardous voltages present LEDTwo selectable battery charge currentsBattery fault impedance limits can be optimised to suit load current helps extend battery lifeMains fail simulation modeImproved on-board temperature sensor with optional remote sensorElectronic functions comply with EN50131-6 grades 1-4 for security applicationsOptional PCB-only versionwithout a metal base plate available

GBP 78.17
1

C-Tec NC944 Four Zone Call Controller with Mute Reset Button

C-Tec NC944 Four Zone Call Controller with Mute Reset Button

C-Tec NC944 Four Zone Call Controller with Mute Reset ButtonThe NC944 Four Zone Call Controller is compatible with all 800 Series call points ceiling pulls infrared ceiling receivers monitoring points overdoor lights and remote sounders.Depending on how the Controller is configured and the devices connected to it Standard and Emergency calls can be indicated via its buzzer and zonal LEDs. Two buttons are also provided to allow the user to Reset or Mute standard calls as detailed below.Standard Calls when triggered by a calling device the Controllers internal buzzer sounds continuously and the relevant zone indicators illuminate steady.Pressing the Controllers Reset Button if enabled cancels all standard calls.Pressing the Controllers Mute Button if enabled silences the Controllers internal buzzer. However if a new call standard or emergency is triggered anywhere on the system the buzzer will resound.Emergency Calls when triggered by a calling device the Controllers internal buzzer pulses and the relevant zone indicators flash. This level of call takes priority over standard calls and cannot be muted accepted or reset at the Controller. An emergency call can only be reset at the device from which it was triggered or via a reset point wired on the same zone.Key FeaturesAn attractively-designed four zone call controller cw mute and reset buttonsFully compatible with C-TECs entire range of 800 Series Call System componentsCapable of indicating standard constant tone and emergency intermittent tone callsRequires a separate NC930 12V 250mA PSUIncludes four zonal alarm LEDs RESET and MUTE buttonsTwo open collector outputs Emergency and Aux OutUp to two NC944s can be connected to one NC930 PSU to create a mini-call system of up to 8 zonesMounts on a standard 25mm UK double gang back box

GBP 75.00
1

C-Tec BF560-12E Switch Mode 12v 2A Caged PSU PCB

C-Tec BF560-12E Switch Mode 12v 2A Caged PSU PCB

C-Tec BF560-12E Switch Mode 12v 2A Caged PSU PCBTheBF560-12E is apowerful switch modedigital hybrid PSU that can be customised to suit your exact requirements. The plasticcoveron PSU PCB guards against touching live parts to VDE 0100-410. Includes the same electronics as the BF560-12 LPCBcertified EN54-4A2 boxed 12V 2A PSU.Key FeaturesMetal base platefacilitatesstraightforwardmountinginside third-party OEMenclosures.Includes a single-pole voltfree changeover relay that switches for any fault condition.Includes afault type hazardous voltages present LED.Two selectable battery charge currents.Battery fault impedance limits can be optimised to suit load current helps extend battery life.Mains fail simulation mode.Improved on-board temperature sensor with optional remote sensor.Electronic functions comply with EN50131-6 grades 1-4 for security applications.Additional InformationEN50131-6 POWER SUPPLIES FOR INTRUSION HOLD UP ALARMS CAPABILITYThe BF560-12E has all the electrical functions required to comply with EN50131-6 Grade 4which includes Grades 3 2 and 1. OEM security companies interested in utilising the BF560-12E inside their own EN50131-6 compliant tamper-resistant enclosures should contact our marketing departmentfor further detailson costs and approvals.PSU CUSTOMISATIONThe BF560-12Ecan be customised to suit your exact requirements using a BF423 configurator PC. Configurable parameters include float voltage temperature compensation battery charge rate mA battery impedance and configurableInputOutput settingsPSU STATUS LEDlocated on the PSU PCB1 flash Mains Failure.2 flashes Battery Voltage Low.3 flashes Battery Voltage Critical.4 flashes Charger Failure.5 flashes Charger OK Battery is either actively charging or in float charge.6 flashes No Batteries Fitted indicating DIP Switch 4 position.7 flashes Battery Resistance Fault Level set by DIP Switch 2 position.8flashes Output Over Voltage.BATTERY FAULT MONITORINGThe BF560-12E monitors battery resistance to the requirements of EN54-4A2. The fault threshold is directly related to the ability of the battery to deliver the rated current to the load. For example batteries stored uncharged for long periods during shipment andor distribution degrade leading to increased internal resistance. If a degraded battery is fitted a fault will be shown by the PSU as mandated by EN54-4A2.DATA PORTData on the BF560-12Es status can be extracted from the PSUsbi-directional data port. The data availableincludes thermistor measurements battery terminal voltage system voltage at load terminals battery charge current load current battery impedanceandASCII text string status messages. Extracting this data requires additional equipment and permissions - contact C-TEC for details.

GBP 70.52
1