bluetooth remote shutter from GBP 4 | See the cheapest prices and offers on css.lazzaweb.dk

C-Tec EP210S Surface Remote Status Unit

C-Tec EP210S Surface Remote Status UnitThe remote status unit is designed to connect to the RS485 terminals on an EP203 Automatic Extinguisher Panel toprovide remote system status indicationviaa 128 x 64 pixel LCD status display.Also includes a pull-down manual release button a mode automanual keyswitch and a wide range of system status indicators.Key FeaturesThree monitored input connections Hold Abort and Mode.Max. 8 remote status units per EP203 panel.Flush remote status unitsEP210F and weather proof enclosures BF3591 also available.

GBP 209.29

1

C-Tec EP210F Flush Remote Status Unit

C-Tec EP210F Flush Remote Status UnitThe remote status unit is designed to connect to the RS485 terminals on an EP203 Automatic Extinguisher Panel toprovide remote system status indicationviaa 128 x 64 pixel LCD status display.Also includes a pull-down manual release button a mode automanual keyswitch and a wide range of system status indicators.Key FeaturesThree monitored input connections Hold Abort and ModelMax. 8 remote status units per EP203 panelSurfaceremote status unitsEP210S and weather proof enclosures BF3591 also available

GBP 202.14

1

C-Tec NC888D Conventional Remote Sounder

C-Tec NC888D Conventional Remote SounderThe NC888D can be connected to any multi-zone 800 Series Call Controller MasterIndicator Panel or Switchable Sounder to increase call indication levels.Key FeaturesIndicates Standard calls via a constant tone and Emergency calls via a pulsing toneNo more than two remote sounders should be connected to thehosting deviceWhen connected to an NC887D Switchable Sounder switching the NC887D off will also disable anyremote sounders connected to it

GBP 24.77

1

C-Tec BF322 5 Series PSU Remote Battery Temperature Sensor

C-Tec BF322 5 Series PSU Remote Battery Temperature SensorA 1.5m long battery temperature sensor designed for use withC-TECs 5 Series of EN54-4A2 power supplies when the PSUs batteries areinstalled in a separate enclosure.Once installed the 5 Series PSU automatically detects thepresence of the BF322 and switches the temperature measurement from itson-board temperature sensor to the remote battery sensor.

GBP 12.34

1

C-Tec QT609E Quantec E Call Point Button Reset No Remote

C-Tec QT609E Quantec E Call Point Button Reset No RemoteA Quantec E Call Point Button Reset.Does not come with a remote.

GBP 52.49

1

C-Tec BF318 Remote LED Indicator Single Gang

C-Tec BF318 Remote LED Indicator Single GangThe BF318 is a high quality remote LED indicator specifically designed for use in fire alarm systems. It incorporates a high intensity wide-angle red LED which is clearly visible from the front of the plate when active. Its primary use is to indicate the activation of hidden or out of-sight fire detectors.Key FeaturesThe front label includes a white write on panel allowing installers to add their own personalised text such as equipment locationsThe unit will fit on 16mm deep flush or surface mount back boxes

GBP 4.00

1

C-Tec QT636 Quantec Interface Unit with Remote Socket

C-Tec QT636 Quantec Interface Unit with Remote SocketAllows any device with a normally open or normally closed 6.35mm 14 inch jack plug to be connected to Quantec. Particularly suited for use with our NC805MD Portable Movement Detector nooperation QT644 Floor Pressure mat nooperationQT633 Bed Exit mat ncoperationor QT634 Chair ExitMat nc operation. Must be wired as a slave to a QT602 or QT609 range addressable call point or QT630 dementia care controller.Key FeaturesWhen thedevice connected to the QT636 is operated a call will be generated on the Quantec call system as programmed.Mounts on a standard UK 25mm single gang back box.

GBP 47.92

1

C-Tec QT609M Quantec Call Point with Magnetic Reset No Remote Sockets

C-Tec QT609M Quantec Call Point with Magnetic Reset No Remote SocketsA programmable Quantec addressable call point. Includes a Call button Resetbuttonand redgreen confidence light. Can make up to 5levels of call - Standard Ensuite Help Required Emergency Presence Attendance dependent on configuration and ancillary devices used. Attack and Attendance calls can also be made if connected to compatible slave infrared receiver.Key FeaturesCan be programmed to operate in a multitude of ways using a QT423 configurator.Connections provided for additional slave devices such as ceiling pulls overdoor lights slave infrared receivers and more.Magnetic reset version.

GBP 51.25

1

C-Tec QT609DSS Quantec Slave Call Point No Remote - Stainless Steel

C-Tec QT609DSS Quantec Slave Call Point No Remote - Stainless SteelA programmable Quantec addressable call point. Includes a Call button Reset button and redgreen confidence light.Can make up to 5 levels of call Standard Ensuite Help Required Emergency Presence Attendance dependent on configuration and ancillary devices used. Attack and Attendance calls can also be made if connected to compatible slave infrared receiver.Can be programmed to operate in a multitude of ways using a QT423 configurator.Connections provided for additional slave devices such as ceiling pulls overdoor lights slave infrared receivers and more.Key FeaturesStainless steel versionPlease note The image is for illustrative purposes only. This product has a stainless steel finish.

GBP 88.30

1

C-Tec QT609 Quantec Call Point with Button Reset No Remote Sockets

C-Tec QT609 Quantec Call Point with Button Reset No Remote SocketsA programmable Quantec addressable call point. Includes a Call button Resetbuttonand redgreen confidence light. Can make up to 5levels of call - Standard Ensuite Help Required Emergency Presence Attendance dependent on configuration and ancillary devices used. Attack and Attendance calls can also be made if connected to compatible slave infrared receiver.Key FeaturesCan be programmed to operate in a multitude of ways using a QT423 configurator.Connections provided for additional slave devices such as ceiling pulls overdoor lights slave infrared receivers and more.QT609M magnetic reset version also available.

GBP 47.26

1

C-Tec NC802DB Conventional Call Point with Button Reset and Remote Socket

C-Tec NC802DB Conventional Call Point with Button Reset and Remote SocketAn attractively designed button-operated callreset point capable of generating Standard calls on an 800 Series Call System. Includes a 6.35mm jack plug socket for the connection of an optional tail call lead pressure mat or other ancillary calling device.Key FeaturesRed reassurance LED confirms a call has been made.Onboard reset button cancels calls made from the NC802DB and standard calls made from other devices wired on the same zone such as ceiling pull units in en-suite areasMounts on a standard UK 25mm single gang flush or surface back box

GBP 27.18

1

C-Tec NC802DEB-12 Conventional Emergency Call Point with Button Reset and Remote Socket

C-Tec NC802DEB-12 Conventional Emergency Call Point with Button Reset and Remote SocketAn attractively designed button-operated callreset point capable of generating Standard and Emergency calls on an 800 Series Call System. Includes a 6.35mm jack plug socket for the connection of an optional tail call lead pressure mat or other ancillary calling device.Key FeaturesRed reassurance LED confirms a call has been madeOnboard reset button cancels Standard and Emergency calls made from the NC802DEB-12 and Standard calls made from other devices wired on the same zone such as ceiling pull units in Ensuite areasMounts on a standard UK 25mm single gang flush or surface back box

GBP 43.27

1

C-Tec CFP Relay Output Card Reset Fault Aux amp Remote Relay Outputs CFP762

C-Tec CFP Relay Output Card Reset Fault Aux Remote Relay Outputs CFP762An optional system expansion device for use withCFP Standard 2-8 Zone Fire PanelsorCFP AlarmSense 2-8 Zone Fire Panels.Key FeaturesProvides four panel-controlled volt free relay outputs reset fault aux. fire and remote.PCB mounts inside the CFP fire panel.Reset relay is active during the panels reset cycle.Fault relay is active in any fault condition. This relay is failsafe and normally energised - if power is removed from the panel the relay will changeover to produce a fault signal.Aux. fire relay is active in an alarm condition provided all relevant delays have expired.Remote relay is active during any Alarm Condition provided all relevant delays have expired.Outputs are NOT designed to switch mains voltages.

GBP 46.63

1

C-Tec NC802DERM Conventional Infrared Call Point with Magnetic Reset and Remote Socket

C-Tec NC802DERM Conventional Infrared Call Point with Magnetic Reset and Remote SocketA button operated call point which comes with an infrared receiver capable of generating Standard and Emergency calls on an 800 Series Call System. Includes a magnetic reset target that requires an NC803M magnetic reset key to operate.Onboard infrared receiver will accept Standard Emergency calls from compatible 800 Series infrared transmitters. Calls can also be made by activating the call points CALL button to make a Standard call and the call points CALL RESET target together for an emergency call.Key FeaturesIncludes a6.35mm jack plug socket for the connection of an optional tail call lead or other ancillary calling deviceRed reassurance LED confirms a call has been madeOnboardmagentic reset target cancels Standard and Emergency calls made from the NC802DEWM and Standard calls made from other devices on the same zoneCan be connected to up to 3 NC302RXCS slave infrared ceiling receivers to increase coverageMounts on a standard UK 25mm single gang flush or surface back box

GBP 63.59

1

C-Tec QT609RSM Quantec Call Point Magnetic Reset with Sounder and Infrared Receiver No Remote Sockets

C-Tec QT609RSM Quantec Call Point Magnetic Reset with Sounder and Infrared Receiver No Remote SocketsA programmable Quantec addressable call point cw infrared receiver and call follower sounder. Includes a Call button Resetbuttonand redgreen confidence light. Onboard infrared receiver accepts calls from compatible Quantecinfrared transmitters. Can make up to 7 levels of call - Standard Ensuite Help Required Emergency Attack Presence Attendance dependent on configuration and ancillary devices used.Key FeaturesCan be programmed to operate in a multitude of ways using a QT423 configurator.Connections provided for additional slave devices such as ceiling pulls overdoor lights slave infrared receivers and more.Call follower sounder can be optionally used to inform staff that other calls are waiting when the system is in Night modesee Technical Specifications for further details.Magnetic reset version.

GBP 65.51

1

C-Tec QT609RS Quantec Call Point Button Reset with Sounder and Infrared Receiver No Remote Sockets

C-Tec QT609RS Quantec Call Point Button Reset with Sounder and Infrared Receiver No Remote SocketsA programmable Quantec addressable call point cw infrared receiver and call follower sounder. Includes a Call button Resetbuttonand redgreen confidence light. Onboard infrared receiver accepts calls from compatible Quantecinfrared transmitters. Can make up to 7 levels of call - Standard Ensuite Help Required Emergency Attack Presence Attendance dependent on configuration and ancillary devices used.Key FeaturesCan be programmed to operate in a multitude of ways using a QT423 configurator.Connections provided for additional slave devices such as ceiling pulls overdoor lights slave infrared receivers and more.Call follower sounder can be optionally used to inform staff that other calls are waiting when the system is in Night modesee Technical Specifications for further details.QT609RSM magnetic reset version also available.

GBP 62.71

1

C-Tec NC809DEM Mk4 Magnetic Emergency Reset Point

C-Tec NC809DEM Mk4 Magnetic Emergency Reset PointThe C-Tec 800 Series NC809DEM emergency call reset point features a magnetic reset.Key FeaturesNo remote socketCan generate emergency calls only

GBP 34.50

1

C-Tec NC805DSP Double Stereo Jack Plug

C-Tec NC805DSP Double Stereo Jack PlugThe C-Tec NC805DSP is a double remote jack socket for use with the 800 series range of call system call points.

GBP 12.06

1

C-Tec NC805C14 Tail Call Lead 4.2m 14ft

C-Tec NC805C14 Tail Call Lead 4.2m 14ftA long 4.2m tail call lead for use with C-TECs Quantec and 800 Series Call Systems. It allows usersto remotely generate Standard calls from armchairs beds etc.Key FeaturesEasily connects to the 6.35mmremote socket on compatible Quantec and 800 Series call pointsActivating the pear push or removing the tail call lead from a call points remote socket will generate a Standard callComprises a pear-shaped call push 4.2m14ft trailing lead and a 6.35mm remote jack plug

GBP 15.54

1

C-Tec NC805C6 Tail Call Lead 1.8m 6ft

C-Tec NC805C6 Tail Call Lead 1.8m 6ftA short 1.8mtail call lead for use with C-TECs Quantec and 800 Series Call Systems. It allows usersto remotely generate Standard calls from armchairs beds etc.Key FeaturesEasily connects to the 6.35mmremote socket on compatible Quantec and 800 Series call pointsActivating the pear push or removing the tail call lead from a call points remote socket will generate a Standard callComprises a pear-shaped call push 1.8m 6ft trailing lead and a 6.35mm remote jack plug.

GBP 13.82

1

C-Tec NC805D Coiled Tail Call Lead 1.2-3.6m 4-12ft

C-Tec NC805D Coiled Tail Call Lead 1.2-3.6m 4-12ftAn extendable coiled tail call lead for use with C-tecs Quantec and 800 Series Call Systems. Allows usersto remotely generate Standard calls from armchairs beds etc.Key FeaturesComprises a pear-shaped call push coiled1.2-3.6mtrailing lead and a 6.5mm remote jack plugEasily connects to the 6.35mmremote socket on compatible Quantec and 800 Series call pointsActivating the pear push or removing the tail call lead from a call points remote socket will generate a Standard call

GBP 21.17

1

C-Tec EP211 Economy Status Unit

C-Tec Economy Status Unit - EP211The status unit is designed to connect to the EP203 Automatic Extinguisher Panel toprovide remote system status indicationviathree LEDs.Key FeaturesIncludes a mode automanual keyswitchMounts on a standard UK single gang 25mm flush or surface back boxMax. 8 economystatus units per EP203 panel

GBP 94.66

1

C-Tec QT609KSISS Quantec Stainless Steel Key Switch Isolatable Call Point - Key Reset with Sounder

C-Tec QT609KSISS Quantec Stainless Steel Key Switch Isolatable Call Point - Key Reset with SounderThe Stainless Steel Call Point generates a call by pressing the button and the control panel will alarm displaying the location where the call has originated.Key FeaturesCalls are reset via KeyswitchNo Remote Socket

GBP 262.92

1

C-Tec NC831KE Conventional 30 Zone Repeater Panel

C-Tec NC831KE Conventional 30 Zone Repeater PanelThe NC811KE NC821KE and NC831KE repeater panels are designed for use with the NC812KE NC822KE and NC832KE master panels.Master panels are fully compatible with all 800 Series call points ceiling pulls infrared ceiling receivers monitoring points overdoor lights and remote sounders.

GBP 398.90

1

C-Tec BF3591 IP66 Rated Non-Locking Enclosure

C-Tec BF3591 IP66 Rated Non-Locking EnclosureAn attractive IP66 rated enclosure designed for use with a SigTEL EVC302GF or EVC302F flush mounting disabled refuge controller.Key FeaturesIncludes a handleandmounting plate.Measures 200 W x 302 H x 123mm deep.Textured RAL 7035 light grey finish.Also compatible with C-TECs EP210F remote status units.

GBP 154.94

1

Awardvindende Google Marketing Powerhouse

Brand

Merchant

Price (EUR)