86 results (0,19068 seconds)

Brand

Colour

Size

Merchant

Price (EUR)

Reset filter

Products
From
Shops

EUROKRAFTbasic Stapling Hammer, For Open Stapling, Mechanical For Staples 6 - 10mm

EUROKRAFTbasic Staple Gun, For Open Stapling, Mechanical For Staples 6 - 14mm

EUROKRAFTbasic Suspended Drawer Unit, For WT Worktable System, 2 Drawers (150/180mm) , Height 395mm

EUROKRAFTbasic Presentation Board, Folding And Mobile, HxWxD 1905 X 3040 X 500mm, Light Grey

EUROKRAFTbasic Presentation Board, Folding And Mobile, HxWxD 1905 X 3640 X 500mm, Blue

EUROKRAFTbasic Presentation Board, Folding And Mobile, HxWxD 1905 X 3640 X 500mm, Light Grey

EUROKRAFTbasic Presentation Board, Folding And Mobile, HxWxD 1905 X 3040 X 500mm, Blue

EUROKRAFTbasic Presentation Board, Folding And Mobile, HxWxD 1905 X 3040 X 500mm, Dark Grey

EUROKRAFTbasic Presentation Board, Folding And Mobile, HxWxD 1905 X 3640 X 500mm, Dark Grey

EUROKRAFTbasic Suspended Drawer Unit, For WT Worktable System, 4 Drawers (90/120/120/150mm) , Height 545mm

EUROKRAFTbasic Suspended Drawer Unit, For WT Worktable System, 3 Drawers (90/120/120mm) , Height 395mm

EUROKRAFTbasic Drum Tool, For Containers With 2'' Thread, GRP Reinforced PP

EUROKRAFTbasic Drum Tool, For Containers With 2'' Thread, GRP Reinforced PP

Drum tool, for containers with 2'' thread, made of GRP reinforced PP. Supplied = assembled. Thread = 2 inch. Material = polypropylene. Seal material = NBR rubber. Colour = blue. Product type = drum tools. For quick, easy and safe filling of aggressive media from containers placed horizontally. The tool is used to open the drum lid and close it again after the filling process. Prevents losses due to drips and leaks. Made of highly resistant, fibreglass reinforced polypropylene. Open drum lids of containers placed horizontally - fill/empty - close. The container does not have to be placed upright for this purpose. No contact with the media/liquids. Quick, easy and clean emptying even when highly viscous liquids are involved. Easy to operate: Attach the drum tool to the lid of the drum using the locking ring, push the handle towards the drum and turn it to unscrew the lid, and pull the handle away from the drum to carry out the filling process. Proceed in the reverse order to close the drum again and remove the drum tool from the lid of the drum. Turning the horizontal container by 180 (with the drum tool attached) makes it easy to fill containers as well. After each filling process, the drum lid is screwed back on tightly - for optimal protection against leakage. This prevents uncontrolled leakage of liquids. Made of robust fibreglass reinforced polypropylene that is highly resistant to chemicals. Seals made of nitrile rubber (NBR) Resistant to aggressive chemicals, acids and alkaline solutions etc.

GBP 199.99
1

5x EUROKRAFTbasic Drum Tool, for Containers with 2'' Thread, Made of GRP Reinforced PP

5x EUROKRAFTbasic Drum Tool, for Containers with 2'' Thread, Made of GRP Reinforced PP

Drum tool, for containers with 2'' thread, made of GRP reinforced PP, 5+ items. Supplied = assembled. Thread = 2 inch. Material = polypropylene. Seal material = NBR rubber. Colour = blue. Product type = drum tools. For quick, easy and safe filling of aggressive media from containers placed horizontally. The tool is used to open the drum lid and close it again after the filling process. Prevents losses due to drips and leaks. Made of highly resistant, fibreglass reinforced polypropylene. Open drum lids of containers placed horizontally - fill/empty - close. The container does not have to be placed upright for this purpose. No contact with the media/liquids. Quick, easy and clean emptying even when highly viscous liquids are involved. Easy to operate: Attach the drum tool to the lid of the drum using the locking ring, push the handle towards the drum and turn it to unscrew the lid, and pull the handle away from the drum to carry out the filling process. Proceed in the reverse order to close the drum again and remove the drum tool from the lid of the drum. Turning the horizontal container by 180 (with the drum tool attached) makes it easy to fill containers as well. After each filling process, the drum lid is screwed back on tightly - for optimal protection against leakage. This prevents uncontrolled leakage of liquids. Made of robust fibreglass reinforced polypropylene that is highly resistant to chemicals. Seals made of nitrile rubber (NBR) Resistant to aggressive chemicals, acids and alkaline solutions etc.

GBP 849.95
1

2x EUROKRAFTbasic Drum Tool, for Containers with 2'' Thread, Made of GRP Reinforced PP

2x EUROKRAFTbasic Drum Tool, for Containers with 2'' Thread, Made of GRP Reinforced PP

Drum tool, for containers with 2'' thread, made of GRP reinforced PP, 2+ items. Supplied = assembled. Thread = 2 inch. Material = polypropylene. Seal material = NBR rubber. Colour = blue. Product type = drum tools. For quick, easy and safe filling of aggressive media from containers placed horizontally. The tool is used to open the drum lid and close it again after the filling process. Prevents losses due to drips and leaks. Made of highly resistant, fibreglass reinforced polypropylene. Open drum lids of containers placed horizontally - fill/empty - close. The container does not have to be placed upright for this purpose. No contact with the media/liquids. Quick, easy and clean emptying even when highly viscous liquids are involved. Easy to operate: Attach the drum tool to the lid of the drum using the locking ring, push the handle towards the drum and turn it to unscrew the lid, and pull the handle away from the drum to carry out the filling process. Proceed in the reverse order to close the drum again and remove the drum tool from the lid of the drum. Turning the horizontal container by 180 (with the drum tool attached) makes it easy to fill containers as well. After each filling process, the drum lid is screwed back on tightly - for optimal protection against leakage. This prevents uncontrolled leakage of liquids. Made of robust fibreglass reinforced polypropylene that is highly resistant to chemicals. Seals made of nitrile rubber (NBR) Resistant to aggressive chemicals, acids and alkaline solutions etc.

GBP 347.98
1

EUROKRAFTbasic TPE Wheel On PP Rim, Ball Bearings, Wheel X Width 100 X 35mm

EUROKRAFTbasic TPE Wheel On PP Rim, Ball Bearings, Wheel X Width 125 X 40mm

EUROKRAFTbasic Cloakroom Locker System With Standard And Extension Modules - HxWxD 1800 X 450 X 500mm - 1 Hat Shelf, 1 Clothes Rail, Light Grey,

EUROKRAFTbasic Cloakroom Locker System With Standard And Extension Modules - HxWxD 1800 X 450 X 500mm - 1 Hat Shelf, 1 Clothes Rail, Light Grey,

Cloakroom locker system with standard and extension modules, HxWxD 1800 x 450 x 500 mm, 1 hat shelf, 1 clothes rail, light grey, standard unit. Supplied = flat pack. Height = 1800 mm. Depth = 500 mm. Width = 450 mm. Body colour = light grey RAL 7035. Door colour = light grey RAL 7035. Lock type = security cylinder lock, individual key. Number of compartments wide = 1 pcs. Number of compartments = 1 pcs. Compartment width = 450 mm. Material = sheet steel, powder coated. Locker height = 1800 mm. Internal fittings = 1 clothes rail, 1 hat shelf. Internal width = 387 mm. Internal height = 1433/260 mm. Internal depth = 458 mm. Door type = hinged door. Number of keys = 2 pcs. Compartment height = 1433/260 mm. Shelf width = 450 mm. Shelf depth = 500 mm. Plinth height = 50 mm. Design = plug-in system. Model = standard unit. Finish = stove enamelled. Standard and extension cupboards for individual combination and to suit requirements. Plug-in system for boltless assembly. Ventilation through perforations in the rear wall. Ideal for any changing room. Combine a standard module with extension modules (only within one model) to create the cloakroom locker combination that suits your requirements. Extension modules leave the left side of the cupboard open for connection to a standard module. Extension module may therefore not be set up individually. Powder coated sheet steel construction. Material thickness 0.70 mm. Body always in light grey RAL 7035. Lockable with security cylinder lock, incl. 2 keys (individual key) Ventilation through perforations in the rear wall. Plinth height 50 mm. It is only possible to combine a standard and extension unit of the same model. Attention: extension modules come with 1 open cupboard side and are set up next to a base element (with four closed sides) They cannot be set up individually. Supplied flat pack - easy self-assembly.

GBP 469.99
1

EUROKRAFTbasic Cloakroom Locker System With Standard And Extension Modules - HxWxD 1800 X 450 X 500mm - 1 Hat Shelf, 1 Clothes Rail, Light Grey/Basalt

EUROKRAFTbasic Cloakroom Locker System With Standard And Extension Modules - HxWxD 1800 X 450 X 500mm - 1 Hat Shelf, 1 Clothes Rail, Light Grey/Basalt

Cloakroom locker system with standard and extension modules, HxWxD 1800 x 450 x 500 mm, 1 hat shelf, 1 clothes rail, light grey/basalt grey, standard unit. Supplied = flat pack. Height = 1800 mm. Depth = 500 mm. Width = 450 mm. Body colour = light grey RAL 7035. Door colour = basalt grey RAL 7012. Lock type = security cylinder lock, individual key. Number of compartments wide = 1 pcs. Number of compartments = 1 pcs. Compartment width = 450 mm. Material = sheet steel, powder coated. Locker height = 1800 mm. Internal fittings = 1 clothes rail, 1 hat shelf. Internal width = 387 mm. Internal height = 1433/260 mm. Internal depth = 458 mm. Door type = hinged door. Number of keys = 2 pcs. Compartment height = 1433/260 mm. Shelf width = 450 mm. Shelf depth = 500 mm. Plinth height = 50 mm. Design = plug-in system. Model = standard unit. Finish = stove enamelled. Standard and extension cupboards for individual combination and to suit requirements. Plug-in system for boltless assembly. Ventilation through perforations in the rear wall. Ideal for any changing room. Combine a standard module with extension modules (only within one model) to create the cloakroom locker combination that suits your requirements. Extension modules leave the left side of the cupboard open for connection to a standard module. Extension module may therefore not be set up individually. Powder coated sheet steel construction. Material thickness 0.70 mm. Body always in light grey RAL 7035. Lockable with security cylinder lock, incl. 2 keys (individual key) Ventilation through perforations in the rear wall. Plinth height 50 mm. It is only possible to combine a standard and extension unit of the same model. Attention: extension modules come with 1 open cupboard side and are set up next to a base element (with four closed sides) They cannot be set up individually. Supplied flat pack - easy self-assembly.

GBP 469.99
1