27 results (0,13929 seconds)

Show all filters

Brand

Size

Merchant

Price (EUR)

Reset filter

Products
From
Shops

Huntingdon Fusion Techniques Pipestoppers Aluminium Pipe Plugs - 1" BSP - 305mm

Huntingdon Fusion Techniques Pipestoppers Aluminium Pipe Plugs - 1" BSP - 305mm

The HFT Pipestoppers Aluminium pipe Plugs are heavy-duty and high-temperature resistant plugs suitable for immersion in chemicals.They can be used for leak testing, isolation, sealing, stopping, and purging pipework in various applications such as ducting, conduit, swimming pools, painting, and casting industries.The plugs come with a variety of rubber sealing rings and a friction-free washer for easy tightening of the wing nut.Sizes range from 1.5" to 36" (38 to 900 mm) to accommodate different entry and exit points.They conform to British Standards BS8005 and BS EN752-4 for low-pressure testing and sealing of pipes.The Aluminium Test Plugs and Stoppers serve as drain test plugs, sewerage test plugs, waste test plugs, scupper plugs, and have numerous other applications.HFT Pipestoppers Aluminium Test Plugs can be used effectively as a permanent stopper. The wings can be cropped to prevent tampering.The natural rubber rings can be used up to 70?C (158?F) in continuous use.The user can extend the range of each plug by a few millimetres by using an exterior rubber seal on top of the ring provided.

GBP 119.99
1

Huntingdon Fusion Techniques Pipestoppers Aluminium Pipe Plugs - 1" BSP - 279mm

Huntingdon Fusion Techniques Pipestoppers Aluminium Pipe Plugs - 1" BSP - 279mm

The HFT Pipestoppers Aluminium pipe Plugs are heavy-duty and high-temperature resistant plugs suitable for immersion in chemicals.They can be used for leak testing, isolation, sealing, stopping, and purging pipework in various applications such as ducting, conduit, swimming pools, painting, and casting industries.The plugs come with a variety of rubber sealing rings and a friction-free washer for easy tightening of the wing nut.Sizes range from 1.5" to 36" (38 to 900 mm) to accommodate different entry and exit points.They conform to British Standards BS8005 and BS EN752-4 for low-pressure testing and sealing of pipes.The Aluminium Test Plugs and Stoppers serve as drain test plugs, sewerage test plugs, waste test plugs, scupper plugs, and have numerous other applications.HFT Pipestoppers Aluminium Test Plugs can be used effectively as a permanent stopper. The wings can be cropped to prevent tampering.The natural rubber rings can be used up to 70?C (158?F) in continuous use.The user can extend the range of each plug by a few millimetres by using an exterior rubber seal on top of the ring provided.

GBP 129.99
1

Huntingdon Fusion Techniques Pipestoppers Aluminium Pipe Plugs - 1" BSP - 254mm

Huntingdon Fusion Techniques Pipestoppers Aluminium Pipe Plugs - 1" BSP - 254mm

The HFT Pipestoppers Aluminium pipe Plugs are heavy-duty and high-temperature resistant plugs suitable for immersion in chemicals.They can be used for leak testing, isolation, sealing, stopping, and purging pipework in various applications such as ducting, conduit, swimming pools, painting, and casting industries.The plugs come with a variety of rubber sealing rings and a friction-free washer for easy tightening of the wing nut.Sizes range from 1.5" to 36" (38 to 900 mm) to accommodate different entry and exit points.They conform to British Standards BS8005 and BS EN752-4 for low-pressure testing and sealing of pipes.The Aluminium Test Plugs and Stoppers serve as drain test plugs, sewerage test plugs, waste test plugs, scupper plugs, and have numerous other applications.HFT Pipestoppers Aluminium Test Plugs can be used effectively as a permanent stopper. The wings can be cropped to prevent tampering.The natural rubber rings can be used up to 70?C (158?F) in continuous use.The user can extend the range of each plug by a few millimetres by using an exterior rubber seal on top of the ring provided.

GBP 102.99
1

Huntingdon Fusion Techniques Pipestoppers Aluminium Pipe Plugs - 1" BSP - 229mm

Huntingdon Fusion Techniques Pipestoppers Aluminium Pipe Plugs - 1" BSP - 229mm

The HFT Pipestoppers Aluminium pipe Plugs are heavy-duty and high-temperature resistant plugs suitable for immersion in chemicals.They can be used for leak testing, isolation, sealing, stopping, and purging pipework in various applications such as ducting, conduit, swimming pools, painting, and casting industries.The plugs come with a variety of rubber sealing rings and a friction-free washer for easy tightening of the wing nut.Sizes range from 1.5" to 36" (38 to 900 mm) to accommodate different entry and exit points.They conform to British Standards BS8005 and BS EN752-4 for low-pressure testing and sealing of pipes.The Aluminium Test Plugs and Stoppers serve as drain test plugs, sewerage test plugs, waste test plugs, scupper plugs, and have numerous other applications.HFT Pipestoppers Aluminium Test Plugs can be used effectively as a permanent stopper. The wings can be cropped to prevent tampering.The natural rubber rings can be used up to 70?C (158?F) in continuous use.The user can extend the range of each plug by a few millimetres by using an exterior rubber seal on top of the ring provided.

GBP 89.99
1

Huntingdon Fusion Techniques Pipestoppers Steel Drain Plugs - Single - 1" BSP - 279mm

Huntingdon Fusion Techniques Pipestoppers Steel Drain Plugs - Single - 1" BSP - 279mm

HFT Pipestoppers Steel Test Plugs are the perfect solution for low-pressure testing and plugging pipes, pipelines, and orifices ranging from 2 to 48" (50 to 1200 mm) in diameter.These durable steel plugs are designed for heavy-duty applications involving long immersion in water, higher temperatures, or contact with acidic or alkaline environments. They outperform nylon, aluminium, and inflatable plugs in such conditions.Choose from a variety of seal options, including natural rubber, silicone, nitrile, neoprene, and Viton, to suit your specific needs. We offer single plugs and double versions for enhanced sealing capacity and stability within pipes.Our HFT Pipestoppers Steel Test Plugs and Stoppers are available in standard sizes for immediate delivery, conforming to Quality Standards BS8005 and BS EN752-4 for low-pressure testing and pipe sealing.HFT Pipestoppers Steel Test Plugs can be used effectively as a permanent stopper. The wings can be cropped to prevent tampering if necessary.The natural rubber rings can be used up to 80?C (176?F) in continuous use.For higher temperatures, we manufacture rings made from silicone that can be used up to 300?C (572?F) and viton, which can be used up to 350?C (662?F) .Plugs can be braced to assist in greater stability. Contact Huntingdon Fusion Techniques HFT for details.Note: For effective sealing, internal surfaces of cavities must be clean and dry.Some smooth surfaces may not be effective and may need to be roughened.Pressure ratings may be affected by poor, slippery or dirty surfaces.

GBP 149.99
1

Huntingdon Fusion Techniques Pipestoppers Steel Drain Plugs - Single - 1" BSP - 178mm

Huntingdon Fusion Techniques Pipestoppers Steel Drain Plugs - Single - 1" BSP - 178mm

HFT Pipestoppers Steel Test Plugs are the perfect solution for low-pressure testing and plugging pipes, pipelines, and orifices ranging from 2 to 48" (50 to 1200 mm) in diameter.These durable steel plugs are designed for heavy-duty applications involving long immersion in water, higher temperatures, or contact with acidic or alkaline environments. They outperform nylon, aluminium, and inflatable plugs in such conditions.Choose from a variety of seal options, including natural rubber, silicone, nitrile, neoprene, and Viton, to suit your specific needs. We offer single plugs and double versions for enhanced sealing capacity and stability within pipes.Our HFT Pipestoppers Steel Test Plugs and Stoppers are available in standard sizes for immediate delivery, conforming to Quality Standards BS8005 and BS EN752-4 for low-pressure testing and pipe sealing.HFT Pipestoppers Steel Test Plugs can be used effectively as a permanent stopper. The wings can be cropped to prevent tampering if necessary.The natural rubber rings can be used up to 80?C (176?F) in continuous use.For higher temperatures, we manufacture rings made from silicone that can be used up to 300?C (572?F) and viton, which can be used up to 350?C (662?F) .Plugs can be braced to assist in greater stability. Contact Huntingdon Fusion Techniques HFT for details.Note: For effective sealing, internal surfaces of cavities must be clean and dry.Some smooth surfaces may not be effective and may need to be roughened.Pressure ratings may be affected by poor, slippery or dirty surfaces.

GBP 89.99
1

Huntingdon Fusion Techniques Pipestoppers Steel Drain Plugs - Single - 1" BSP - 229mm

Huntingdon Fusion Techniques Pipestoppers Steel Drain Plugs - Single - 1" BSP - 229mm

HFT Pipestoppers Steel Test Plugs are the perfect solution for low-pressure testing and plugging pipes, pipelines, and orifices ranging from 2 to 48" (50 to 1200 mm) in diameter.These durable steel plugs are designed for heavy-duty applications involving long immersion in water, higher temperatures, or contact with acidic or alkaline environments. They outperform nylon, aluminium, and inflatable plugs in such conditions.Choose from a variety of seal options, including natural rubber, silicone, nitrile, neoprene, and Viton, to suit your specific needs. We offer single plugs and double versions for enhanced sealing capacity and stability within pipes.Our HFT Pipestoppers Steel Test Plugs and Stoppers are available in standard sizes for immediate delivery, conforming to Quality Standards BS8005 and BS EN752-4 for low-pressure testing and pipe sealing.HFT Pipestoppers Steel Test Plugs can be used effectively as a permanent stopper. The wings can be cropped to prevent tampering if necessary.The natural rubber rings can be used up to 80?C (176?F) in continuous use.For higher temperatures, we manufacture rings made from silicone that can be used up to 300?C (572?F) and viton, which can be used up to 350?C (662?F) .Plugs can be braced to assist in greater stability. Contact Huntingdon Fusion Techniques HFT for details.Note: For effective sealing, internal surfaces of cavities must be clean and dry.Some smooth surfaces may not be effective and may need to be roughened.Pressure ratings may be affected by poor, slippery or dirty surfaces.

GBP 119.99
1

Huntingdon Fusion Techniques Pipestoppers Steel Drain Plugs - Single - 1" BSP - 305mm

Huntingdon Fusion Techniques Pipestoppers Steel Drain Plugs - Single - 1" BSP - 305mm

HFT Pipestoppers Steel Test Plugs are the perfect solution for low-pressure testing and plugging pipes, pipelines, and orifices ranging from 2 to 48" (50 to 1200 mm) in diameter.These durable steel plugs are designed for heavy-duty applications involving long immersion in water, higher temperatures, or contact with acidic or alkaline environments. They outperform nylon, aluminium, and inflatable plugs in such conditions.Choose from a variety of seal options, including natural rubber, silicone, nitrile, neoprene, and Viton, to suit your specific needs. We offer single plugs and double versions for enhanced sealing capacity and stability within pipes.Our HFT Pipestoppers Steel Test Plugs and Stoppers are available in standard sizes for immediate delivery, conforming to Quality Standards BS8005 and BS EN752-4 for low-pressure testing and pipe sealing.HFT Pipestoppers Steel Test Plugs can be used effectively as a permanent stopper. The wings can be cropped to prevent tampering if necessary.The natural rubber rings can be used up to 80?C (176?F) in continuous use.For higher temperatures, we manufacture rings made from silicone that can be used up to 300?C (572?F) and viton, which can be used up to 350?C (662?F) .Plugs can be braced to assist in greater stability. Contact Huntingdon Fusion Techniques HFT for details.Note: For effective sealing, internal surfaces of cavities must be clean and dry.Some smooth surfaces may not be effective and may need to be roughened.Pressure ratings may be affected by poor, slippery or dirty surfaces.

GBP 149.99
1

Huntingdon Fusion Techniques Pipestoppers Steel Drain Plugs - Single - 1" BSP - 254mm

Huntingdon Fusion Techniques Pipestoppers Steel Drain Plugs - Single - 1" BSP - 254mm

HFT Pipestoppers Steel Test Plugs are the perfect solution for low-pressure testing and plugging pipes, pipelines, and orifices ranging from 2 to 48" (50 to 1200 mm) in diameter.These durable steel plugs are designed for heavy-duty applications involving long immersion in water, higher temperatures, or contact with acidic or alkaline environments. They outperform nylon, aluminium, and inflatable plugs in such conditions.Choose from a variety of seal options, including natural rubber, silicone, nitrile, neoprene, and Viton, to suit your specific needs. We offer single plugs and double versions for enhanced sealing capacity and stability within pipes.Our HFT Pipestoppers Steel Test Plugs and Stoppers are available in standard sizes for immediate delivery, conforming to Quality Standards BS8005 and BS EN752-4 for low-pressure testing and pipe sealing.HFT Pipestoppers Steel Test Plugs can be used effectively as a permanent stopper. The wings can be cropped to prevent tampering if necessary.The natural rubber rings can be used up to 80?C (176?F) in continuous use.For higher temperatures, we manufacture rings made from silicone that can be used up to 300?C (572?F) and viton, which can be used up to 350?C (662?F) .Plugs can be braced to assist in greater stability. Contact Huntingdon Fusion Techniques HFT for details.Note: For effective sealing, internal surfaces of cavities must be clean and dry.Some smooth surfaces may not be effective and may need to be roughened.Pressure ratings may be affected by poor, slippery or dirty surfaces.

GBP 149.99
1

Huntingdon Fusion Techniques Pipestoppers Steel Drain Plugs - Single - 1" BSP - 203mm

Huntingdon Fusion Techniques Pipestoppers Steel Drain Plugs - Single - 1" BSP - 203mm

HFT Pipestoppers Steel Test Plugs are the perfect solution for low-pressure testing and plugging pipes, pipelines, and orifices ranging from 2 to 48" (50 to 1200 mm) in diameter.These durable steel plugs are designed for heavy-duty applications involving long immersion in water, higher temperatures, or contact with acidic or alkaline environments. They outperform nylon, aluminium, and inflatable plugs in such conditions.Choose from a variety of seal options, including natural rubber, silicone, nitrile, neoprene, and Viton, to suit your specific needs. We offer single plugs and double versions for enhanced sealing capacity and stability within pipes.Our HFT Pipestoppers Steel Test Plugs and Stoppers are available in standard sizes for immediate delivery, conforming to Quality Standards BS8005 and BS EN752-4 for low-pressure testing and pipe sealing.HFT Pipestoppers Steel Test Plugs can be used effectively as a permanent stopper. The wings can be cropped to prevent tampering if necessary.The natural rubber rings can be used up to 80?C (176?F) in continuous use.For higher temperatures, we manufacture rings made from silicone that can be used up to 300?C (572?F) and viton, which can be used up to 350?C (662?F) .Plugs can be braced to assist in greater stability. Contact Huntingdon Fusion Techniques HFT for details.Note: For effective sealing, internal surfaces of cavities must be clean and dry.Some smooth surfaces may not be effective and may need to be roughened.Pressure ratings may be affected by poor, slippery or dirty surfaces.

GBP 99.99
1

Huntingdon Fusion Techniques Argweld PurgElite Heat Resistant Covers - 152mm

Huntingdon Fusion Techniques Argweld PurgElite Heat Resistant Covers - 152mm

Huntingdon Fusion Techniques (HFT) produces a variety of Argweld Heat Resistant and Chemical Resistant Covers designed specifically for Inflatable Pipe Purging Systems. These covers offer convenient and efficient protection against heat, oil, hydrocarbons, and chemicals. They are quick to deploy and provide instant shielding in environments where such substances are present, ensuring optimal safety and performance. Every cover within the range is constructed using a durable acrylic fabric that exhibits exceptional resistance to high temperatures. This fabric is further enhanced with a thick felt-like material, bolstered by an additional fiberglass backing, resulting in covers that offer superior strength and performance. Benefits High temperature resistant: The covers are made from a high temperature resistant acrylic fabric with a fiberglass backing. This makes them resistant to heat, oils, hydrocarbons, and petrochemicals. Durable: The covers are made from a thick felt type material that is very strong and durable. Standard for PurgElite Systems: The covers are specified as standard for the PurgElite Inflatable Pipe Weld Purging Systems. Contact us for all sizes above 12" (300 mm).

GBP 119.99
1

Huntingdon Fusion Techniques Argweld PurgElite Heat Resistant Covers - 203mm

Huntingdon Fusion Techniques Argweld PurgElite Heat Resistant Covers - 203mm

Huntingdon Fusion Techniques (HFT) produces a variety of Argweld Heat Resistant and Chemical Resistant Covers designed specifically for Inflatable Pipe Purging Systems. These covers offer convenient and efficient protection against heat, oil, hydrocarbons, and chemicals. They are quick to deploy and provide instant shielding in environments where such substances are present, ensuring optimal safety and performance. Every cover within the range is constructed using a durable acrylic fabric that exhibits exceptional resistance to high temperatures. This fabric is further enhanced with a thick felt-like material, bolstered by an additional fiberglass backing, resulting in covers that offer superior strength and performance. Benefits High temperature resistant: The covers are made from a high temperature resistant acrylic fabric with a fiberglass backing. This makes them resistant to heat, oils, hydrocarbons, and petrochemicals. Durable: The covers are made from a thick felt type material that is very strong and durable. Standard for PurgElite Systems: The covers are specified as standard for the PurgElite Inflatable Pipe Weld Purging Systems. Contact us for all sizes above 12" (300 mm).

GBP 169.99
1

Huntingdon Fusion Techniques Argweld PurgElite Heat Resistant Covers - 178mm

Huntingdon Fusion Techniques Argweld PurgElite Heat Resistant Covers - 178mm

Huntingdon Fusion Techniques (HFT) produces a variety of Argweld Heat Resistant and Chemical Resistant Covers designed specifically for Inflatable Pipe Purging Systems. These covers offer convenient and efficient protection against heat, oil, hydrocarbons, and chemicals. They are quick to deploy and provide instant shielding in environments where such substances are present, ensuring optimal safety and performance. Every cover within the range is constructed using a durable acrylic fabric that exhibits exceptional resistance to high temperatures. This fabric is further enhanced with a thick felt-like material, bolstered by an additional fiberglass backing, resulting in covers that offer superior strength and performance. Benefits - High temperature resistant: The covers are made from a high temperature resistant acrylic fabric with a fiberglass backing. This makes them resistant to heat, oils, hydrocarbons, and petrochemicals. - Durable: The covers are made from a thick felt type material that is very strong and durable. - Standard for PurgElite Systems: The covers are specified as standard for the PurgElite Inflatable Pipe Weld Purging Systems. Contact us for all sizes above 12" (300 mm).

GBP 143.99
1

Huntingdon Fusion Techniques Argweld PurgElite Heat Resistant Covers - 127mm

Huntingdon Fusion Techniques Argweld PurgElite Heat Resistant Covers - 127mm

Huntingdon Fusion Techniques (HFT) produces a variety of Argweld Heat Resistant and Chemical Resistant Covers designed specifically for Inflatable Pipe Purging Systems. These covers offer convenient and efficient protection against heat, oil, hydrocarbons, and chemicals. They are quick to deploy and provide instant shielding in environments where such substances are present, ensuring optimal safety and performance. Every cover within the range is constructed using a durable acrylic fabric that exhibits exceptional resistance to high temperatures. This fabric is further enhanced with a thick felt-like material, bolstered by an additional fiberglass backing, resulting in covers that offer superior strength and performance. Benefits - High temperature resistant: The covers are made from a high temperature resistant acrylic fabric with a fiberglass backing. This makes them resistant to heat, oils, hydrocarbons, and petrochemicals. - Durable: The covers are made from a thick felt type material that is very strong and durable. - Standard for PurgElite Systems: The covers are specified as standard for the PurgElite Inflatable Pipe Weld Purging Systems. Contact us for all sizes above 12" (300 mm).

GBP 94.99
1

Huntingdon Fusion Techniques Inflatable Stoppers - Cylindrical & Spherical - 381mm

Huntingdon Fusion Techniques Inflatable Stoppers - Cylindrical & Spherical - 381mm

Huntingdon Fusion Techniques HFT Inflatable Stoppers are designed to swiftly and effortlessly halt gas or liquid flow, prevent debris accumulation, and deter the entry of undesired substances or creatures into pipes and ducts. The adaptable Pipestoppers Inflatable Stoppers are capable of being inserted and retracted through narrow openings, and once inflated, they expand to their maximum size to facilitate stopping operations. Cylindrical Inflatable Stoppers, being longer than their diameter, maintain stability and prevent inversion within a pipe even when subjected to pressure. Spherical Stoppers are utilized in situations where the stopper's position is irrelevant, as they can create a seal regardless of the angle at which they are placed. FAQs 1. How do I know when to choose between a Mechanical and an Inflatable Stopper? HFT Pipestoppers Inflatable Stoppers can be inserted and retracted through holes smaller than the one to be sealed. They are much less expensive than mechanical stoppers, but are not so suitable for applications requiring the ruggedness and strength of a mechanical stopper. 2. How do I prevent the stoppers from being pushed out of the pipe during a pressure test? It is common to brace the ends of pipes to prevent stoppers sliding out. Contact us for further information. 3. Will your stoppers be suitable for use in petrochemical pipework where there are hydrocarbon liquids and gases present? The HFT Pipestoppers Division manufactures special Inflatable Stoppers for the petrochemical industry where long term resistance to chemicals and/or petrochemical oils and vapours is necessary.

GBP 139.99
1

Huntingdon Fusion Techniques Inflatable Stoppers - Cylindrical & Spherical - 356mm

Huntingdon Fusion Techniques Inflatable Stoppers - Cylindrical & Spherical - 356mm

Huntingdon Fusion Techniques HFT Inflatable Stoppers are designed to swiftly and effortlessly halt gas or liquid flow, prevent debris accumulation, and deter the entry of undesired substances or creatures into pipes and ducts. The adaptable Pipestoppers Inflatable Stoppers are capable of being inserted and retracted through narrow openings, and once inflated, they expand to their maximum size to facilitate stopping operations. Cylindrical Inflatable Stoppers, being longer than their diameter, maintain stability and prevent inversion within a pipe even when subjected to pressure. Spherical Stoppers are utilized in situations where the stopper's position is irrelevant, as they can create a seal regardless of the angle at which they are placed. FAQs 1. How do I know when to choose between a Mechanical and an Inflatable Stopper? HFT Pipestoppers Inflatable Stoppers can be inserted and retracted through holes smaller than the one to be sealed. They are much less expensive than mechanical stoppers, but are not so suitable for applications requiring the ruggedness and strength of a mechanical stopper. 2. How do I prevent the stoppers from being pushed out of the pipe during a pressure test? It is common to brace the ends of pipes to prevent stoppers sliding out. Contact us for further information. 3. Will your stoppers be suitable for use in petrochemical pipework where there are hydrocarbon liquids and gases present? The HFT Pipestoppers Division manufactures special Inflatable Stoppers for the petrochemical industry where long term resistance to chemicals and/or petrochemical oils and vapours is necessary.

GBP 119.99
1

Huntingdon Fusion Techniques Inflatable Stoppers - Cylindrical & Spherical - 305mm

Huntingdon Fusion Techniques Inflatable Stoppers - Cylindrical & Spherical - 305mm

Huntingdon Fusion Techniques HFT Inflatable Stoppers are designed to swiftly and effortlessly halt gas or liquid flow, prevent debris accumulation, and deter the entry of undesired substances or creatures into pipes and ducts. The adaptable Pipestoppers Inflatable Stoppers are capable of being inserted and retracted through narrow openings, and once inflated, they expand to their maximum size to facilitate stopping operations. Cylindrical Inflatable Stoppers, being longer than their diameter, maintain stability and prevent inversion within a pipe even when subjected to pressure. Spherical Stoppers are utilized in situations where the stopper's position is irrelevant, as they can create a seal regardless of the angle at which they are placed. FAQs 1. How do I know when to choose between a Mechanical and an Inflatable Stopper? HFT Pipestoppers Inflatable Stoppers can be inserted and retracted through holes smaller than the one to be sealed. They are much less expensive than mechanical stoppers, but are not so suitable for applications requiring the ruggedness and strength of a mechanical stopper. 2. How do I prevent the stoppers from being pushed out of the pipe during a pressure test? It is common to brace the ends of pipes to prevent stoppers sliding out. Contact us for further information. 3. Will your stoppers be suitable for use in petrochemical pipework where there are hydrocarbon liquids and gases present? The HFT Pipestoppers Division manufactures special Inflatable Stoppers for the petrochemical industry where long term resistance to chemicals and/or petrochemical oils and vapours is necessary.

GBP 89.99
1

Huntingdon Fusion Techniques Inflatable Stoppers - Cylindrical & Spherical - 406mm

Huntingdon Fusion Techniques Inflatable Stoppers - Cylindrical & Spherical - 406mm

Huntingdon Fusion Techniques HFT Inflatable Stoppers are designed to swiftly and effortlessly halt gas or liquid flow, prevent debris accumulation, and deter the entry of undesired substances or creatures into pipes and ducts. The adaptable Pipestoppers Inflatable Stoppers are capable of being inserted and retracted through narrow openings, and once inflated, they expand to their maximum size to facilitate stopping operations. Cylindrical Inflatable Stoppers, being longer than their diameter, maintain stability and prevent inversion within a pipe even when subjected to pressure. Spherical Stoppers are utilized in situations where the stopper's position is irrelevant, as they can create a seal regardless of the angle at which they are placed. FAQs 1. How do I know when to choose between a Mechanical and an Inflatable Stopper? HFT Pipestoppers Inflatable Stoppers can be inserted and retracted through holes smaller than the one to be sealed. They are much less expensive than mechanical stoppers, but are not so suitable for applications requiring the ruggedness and strength of a mechanical stopper. 2. How do I prevent the stoppers from being pushed out of the pipe during a pressure test? It is common to brace the ends of pipes to prevent stoppers sliding out. Contact us for further information. 3. Will your stoppers be suitable for use in petrochemical pipework where there are hydrocarbon liquids and gases present? The HFT Pipestoppers Division manufactures special Inflatable Stoppers for the petrochemical industry where long term resistance to chemicals and/or petrochemical oils and vapours is necessary.

GBP 143.99
1

Huntingdon Fusion Techniques Argweld Argon Gas Feed Hose Assembly - 30m

Huntingdon Fusion Techniques Argweld Argon Gas Feed Hose Assembly - 30m

Huntingdon Fusion Technique's (HFT) off-the-shelf Argon Feed Hose is available in a variety of standard lengths, including 30m, 25m, 20m, 15m, 10m, and 5m. Each assembly is crafted to meet high-quality standards and comes equipped with an argon regulator fitting on one end and a 12 mm to 12 mm quick connect fitting on the other end. We also offer a range of alternative fittings, such as hose tails, tailpieces, and various quick disconnect options. What's In The Box APBS409 - Coupling, Female Thread 3/8" BSP (to fit cylinder regulator) APBS412 - Hose Tail 6.35 mm (1/4") ID to suit APBS409 APBS411 - Male threaded tailpiece 1/4" to suit APGV5002 Order APGV5002 to fit to PurgElite, PurgExtra, QuickPurge and HotPurge Inflatable Tube, Pipe and Pipeline Weld Purging Systems. FAQs 1. Do I have to attach the fittings to the hose myself? No, the hose comes complete with the fittings crimped onto each end. 2. I require a length of hose not shown on the price list, is this possible? Yes, contact us with your desired length and they will quote a price. 3. Is there a maximum length? Yes, 100m is the longest length in a straight run, however longer lengths can be made up with joining connectors. 4. Is the hose stamped with the specification? Yes, each length of hose is marked in white ink along the length with the specification: Argon Gas Hose BS EN 559 20 Bar (300 PSI) WP-MM.ID. 5. Do you keep good stocks? Yes, we have hose and all fittings in stock and lengths can be made up quickly by our assembly team. 6. Can I purchase the fittings separately if required? Yes, all fittings can be bought individually. 7. Does the hose have a British Standard? Yes, it is BS EN 559. 8. What is the temperature resistance range of the hose? From -30C up to +80C. 9. Is the hose just for argon? No, it can also be used for nitrogen. 10. How much does it weigh? 0.16 kgs per metre. 11. What are the dimensions of the hose? The ID is 6 mm and the OD is 13 mm. 12. What is the maximum pressure rating of the hose? Working pressure is 300 psi, 20 bar.

GBP 169.99
1

Huntingdon Fusion Techniques Argweld Argon Gas Feed Hose Assembly - 15m

Huntingdon Fusion Techniques Argweld Argon Gas Feed Hose Assembly - 15m

Huntingdon Fusion Technique's (HFT) off-the-shelf Argon Feed Hose is available in a variety of standard lengths, including 30m, 25m, 20m, 15m, 10m, and 5m. Each assembly is crafted to meet high-quality standards and comes equipped with an argon regulator fitting on one end and a 12 mm to 12 mm quick connect fitting on the other end. We also offer a range of alternative fittings, such as hose tails, tailpieces, and various quick disconnect options. What's In The Box APBS409 - Coupling, Female Thread 3/8" BSP (to fit cylinder regulator) APBS412 - Hose Tail 6.35 mm (1/4") ID to suit APBS409 APBS411 - Male threaded tailpiece 1/4" to suit APGV5002 Order APGV5002 to fit to PurgElite, PurgExtra, QuickPurge and HotPurge Inflatable Tube, Pipe and Pipeline Weld Purging Systems. FAQs 1. Do I have to attach the fittings to the hose myself? No, the hose comes complete with the fittings crimped onto each end. 2. I require a length of hose not shown on the price list, is this possible? Yes, contact us with your desired length and we will quote a price. 3. Is there a maximum length? Yes, 100m is the longest length in a straight run; however, longer lengths can be made up with joining connectors. 4. Is the hose stamped with the specification? Yes, each length of hose is marked in white ink along the length with the specification: Argon Gas Hose BS EN 559 20 Bar (300 PSI) WP-MM.ID. 5. Do you keep good stocks? Yes, we have hose and all fittings in stock, and lengths can be made up quickly by our assembly team. 6. Can I purchase the fittings separately if required? Yes, all fittings can be bought individually. 7. Does the hose have a British Standard? Yes, it is BS EN 559. 8. What is the temperature resistance range of the hose? From -30C up to +80C. 9. Is the hose just for argon? No, it can also be used for nitrogen. 10. How much does it weigh? 0.16 kg per metre. 11. What are the dimensions of the hose? The ID is 6 mm and the OD is 13 mm. 12. What is the maximum pressure rating of the hose? Working pressure is 300 psi, 20 bar.

GBP 109.99
1

Huntingdon Fusion Techniques Argweld Argon Gas Feed Hose Assembly - 25m

Huntingdon Fusion Techniques Argweld Argon Gas Feed Hose Assembly - 25m

Huntingdon Fusion Technique's (HFT) off-the-shelf Argon Feed Hose is available in a variety of standard lengths, including 30m, 25m, 20m, 15m, 10m, and 5m. Each assembly is crafted to meet high-quality standards and comes equipped with an argon regulator fitting on one end and a 12 mm to 12 mm quick connect fitting on the other end. We also offer a range of alternative fittings, such as hose tails, tailpieces, and various quick disconnect options. What's In The Box APBS409 - Coupling, Female Thread 3/8" BSP (to fit cylinder regulator) APBS412 - Hose Tail 6.35 mm (1/4") ID to suit APBS409 APBS411 - Male threaded tailpiece 1/4" to suit APGV5002 Order APGV5002 to fit to PurgElite, PurgExtra, QuickPurge and HotPurge Inflatable Tube, Pipe and Pipeline Weld Purging Systems. FAQs 1. Do I have to attach the fittings to the hose myself? No, the hose comes complete with the fittings crimped onto each end. 2. I require a length of hose not shown on the price list, is this possible? Yes, contact us with your desired length and they will quote a price. 3. Is there a maximum length? Yes, 100m is the longest length in a straight run, however longer lengths can be made up with joining connectors. 4. Is the hose stamped with the specification? Yes, each length of hose is marked in white ink along the length with the specification: Argon Gas Hose BS EN 559 20 Bar (300 PSI) WP-MM.ID. 5. Do you keep good stocks? Yes, we have hose and all fittings in stock and lengths can be made up quickly by our assembly team. 6. Can I purchase the fittings separately if required? Yes, all fittings can be bought individually. 7. Does the hose have a British Standard? Yes, it is BS EN 559. 8. What is the temperature resistance range of the hose? From -30C up to +80C. 9. Is the hose just for argon? No, it can also be used for nitrogen. 10. How much does it weigh? 0.16 kgs per metre. 11. What are the dimensions of the hose? The ID is 6 mm and the OD is 13 mm. 12. What is the maximum pressure rating of the hose? Working pressure is 300 psi, 20 bar.

GBP 149.99
1

Huntingdon Fusion Techniques Argweld Argon Gas Feed Hose Assembly - 20m

Huntingdon Fusion Techniques Argweld Argon Gas Feed Hose Assembly - 20m

Huntingdon Fusion Technique's (HFT) off-the-shelf Argon Feed Hose is available in a variety of standard lengths, including 30m, 25m, 20m, 15m, 10m, and 5m. Each assembly is crafted to meet high-quality standards and comes equipped with an argon regulator fitting on one end and a 12 mm to 12 mm quick connect fitting on the other end. We also offer a range of alternative fittings, such as hose tails, tailpieces, and various quick disconnect options. What's In The Box APBS409 - Coupling, Female Thread 3/8" BSP (to fit cylinder regulator) APBS412 - Hose Tail 6.35 mm (1/4") ID to suit APBS409 APBS411 - Male threaded tailpiece 1/4" to suit APGV5002 Order APGV5002 to fit to PurgElite, PurgExtra, QuickPurge and HotPurge Inflatable Tube, Pipe and Pipeline Weld Purging Systems. FAQs 1. Do I have to attach the fittings to the hose myself? No, the hose comes complete with the fittings crimped onto each end. 2. I require a length of hose not shown on the price list, is this possible? Yes, contact us with your desired length and they will quote a price. 3. Is there a maximum length? Yes, 100m is the longest length in a straight run, however longer lengths can be made up with joining connectors. 4. Is the hose stamped with the specification? Yes, each length of hose is marked in white ink along the length with the specification: Argon Gas Hose BS EN 559 20 Bar (300 PSI) WP-MM.ID. 5. Do you keep good stocks? Yes, we have hose and all fittings in stock and lengths can be made up quickly by our assembly team. 6. Can I purchase the fittings separately if required? Yes, all fittings can be bought individually. 7. Does the hose have a British Standard? Yes, it is BS EN 559. 8. What is the temperature resistance range of the hose? From -30C up to +80C. 9. Is the hose just for argon? No, it can also be used for nitrogen. 10. How much does it weigh? 0.16 kg per metre. 11. What are the dimensions of the hose? The ID is 6 mm and the OD is 13 mm. 12. What is the maximum pressure rating of the hose? Working pressure is 300 psi, 20 bar.

GBP 129.99
1