4d build from GBP 668 | See the cheapest prices and offers on css.lazzaweb.dk

Lambo Countach Reproduction Chassis (Material: Lightweight Performance, 50% Deposit: No)

We Developed the chassis for a client based on their Granada, During the process we spent a lot of time re designing every aspect of the assembly process by removing as many joins as possible, we ensured that we used as many continuous tubes as possible, this benefits in 3 main ways: Less Weight More structural rigidity More efficient production The Chassis is designed to resemble to original but also give Modern solutions to original problems And to benefit the custom build community. Our Chassis are all made from CDS Tube with specific properties suitable for the application ( See options listed ) The chassis includes a roll over structure made from BS4-T45 (WW2 Aircraft Axel material) Large Engine Bay making space for modern Power solutions such as Audi RS4, BMW V12, Corvette LS1 Etc Etc.. The Cockpit of the Chassis is designed to be as large as it is possible to benefit Taller Occupants The Chassis Will come with wishbone, suspension and linkage bracketry but not fitted, this is because all the builds are general built to work with chosen parts, this allows the builder to locate them accordingly. The Chassis is designed to fit a prova body shell HOWEVER as most people understand a fibre glass shell is never identical to the last and as such we have decided it best to send our chassis with the roll cage and rear body support “Stich” Welded rather than fully welded, this is so the builder can make any necessary tweaks to get the nicest best possible fit for their body without hacking at the chassis first. Disclaimer Whilst we have made every possible effort to design the chassis a perfect fit for common components, the vast array of build options could cause the builder to make amendments or fine tuning to suit their requirements. Each chassis will not be dispatched until our Contract has been signed, this protects our product and holds all responsibility to the buyer, should our product be misused resulting in damage to our business. We will not hold back on prosecution in such events.

GBP 20400.00

1

Lambo Countach Reproduction Chassis (Material: Standard, 50% Deposit: Yes)

We Developed the chassis for a client based on their Granada, During the process we spent a lot of time re designing every aspect of the assembly process by removing as many joins as possible, we ensured that we used as many continuous tubes as possible, this benefits in 3 main ways: Less Weight More structural rigidity More efficient production The Chassis is designed to resemble to original but also give Modern solutions to original problems And to benefit the custom build community. Our Chassis are all made from CDS Tube with specific properties suitable for the application ( See options listed ) The chassis includes a roll over structure made from BS4-T45 (WW2 Aircraft Axel material) Large Engine Bay making space for modern Power solutions such as Audi RS4, BMW V12, Corvette LS1 Etc Etc.. The Cockpit of the Chassis is designed to be as large as it is possible to benefit Taller Occupants The Chassis Will come with wishbone, suspension and linkage bracketry but not fitted, this is because all the builds are general built to work with chosen parts, this allows the builder to locate them accordingly. The Chassis is designed to fit a prova body shell HOWEVER as most people understand a fibre glass shell is never identical to the last and as such we have decided it best to send our chassis with the roll cage and rear body support “Stich” Welded rather than fully welded, this is so the builder can make any necessary tweaks to get the nicest best possible fit for their body without hacking at the chassis first. Disclaimer Whilst we have made every possible effort to design the chassis a perfect fit for common components, the vast array of build options could cause the builder to make amendments or fine tuning to suit their requirements. Each chassis will not be dispatched until our Contract has been signed, this protects our product and holds all responsibility to the buyer, should our product be misused resulting in damage to our business. We will not hold back on prosecution in such events.

GBP 7620.00

1

Lambo Countach Reproduction Chassis (Material: Lightweight Performance, 50% Deposit: Yes)

We Developed the chassis for a client based on their Granada, During the process we spent a lot of time re designing every aspect of the assembly process by removing as many joins as possible, we ensured that we used as many continuous tubes as possible, this benefits in 3 main ways: Less Weight More structural rigidity More efficient production The Chassis is designed to resemble to original but also give Modern solutions to original problems And to benefit the custom build community. Our Chassis are all made from CDS Tube with specific properties suitable for the application ( See options listed ) The chassis includes a roll over structure made from BS4-T45 (WW2 Aircraft Axel material) Large Engine Bay making space for modern Power solutions such as Audi RS4, BMW V12, Corvette LS1 Etc Etc.. The Cockpit of the Chassis is designed to be as large as it is possible to benefit Taller Occupants The Chassis Will come with wishbone, suspension and linkage bracketry but not fitted, this is because all the builds are general built to work with chosen parts, this allows the builder to locate them accordingly. The Chassis is designed to fit a prova body shell HOWEVER as most people understand a fibre glass shell is never identical to the last and as such we have decided it best to send our chassis with the roll cage and rear body support “Stich” Welded rather than fully welded, this is so the builder can make any necessary tweaks to get the nicest best possible fit for their body without hacking at the chassis first. Disclaimer Whilst we have made every possible effort to design the chassis a perfect fit for common components, the vast array of build options could cause the builder to make amendments or fine tuning to suit their requirements. Each chassis will not be dispatched until our Contract has been signed, this protects our product and holds all responsibility to the buyer, should our product be misused resulting in damage to our business. We will not hold back on prosecution in such events.

GBP 10380.00

1

Lambo Countach Reproduction Chassis (Material: Standard, 50% Deposit: No)

We Developed the chassis for a client based on their Granada, During the process we spent a lot of time re designing every aspect of the assembly process by removing as many joins as possible, we ensured that we used as many continuous tubes as possible, this benefits in 3 main ways: Less Weight More structural rigidity More efficient production The Chassis is designed to resemble to original but also give Modern solutions to original problems And to benefit the custom build community. Our Chassis are all made from CDS Tube with specific properties suitable for the application ( See options listed ) The chassis includes a roll over structure made from BS4-T45 (WW2 Aircraft Axel material) Large Engine Bay making space for modern Power solutions such as Audi RS4, BMW V12, Corvette LS1 Etc Etc.. The Cockpit of the Chassis is designed to be as large as it is possible to benefit Taller Occupants The Chassis Will come with wishbone, suspension and linkage bracketry but not fitted, this is because all the builds are general built to work with chosen parts, this allows the builder to locate them accordingly. The Chassis is designed to fit a prova body shell HOWEVER as most people understand a fibre glass shell is never identical to the last and as such we have decided it best to send our chassis with the roll cage and rear body support “Stich” Welded rather than fully welded, this is so the builder can make any necessary tweaks to get the nicest best possible fit for their body without hacking at the chassis first. Disclaimer Whilst we have made every possible effort to design the chassis a perfect fit for common components, the vast array of build options could cause the builder to make amendments or fine tuning to suit their requirements. Each chassis will not be dispatched until our Contract has been signed, this protects our product and holds all responsibility to the buyer, should our product be misused resulting in damage to our business. We will not hold back on prosecution in such events.

GBP 15000.00

1

Classic Mini Weld-In Roll Cage Kit – Motorsport-Ready Safety (Material: Standard CDS, Design Options: JPC1.5 (single diagonal, harness bar and single

🏁 Classic Mini Weld-In Roll Cage Kit – Built for Motorsport & Performance! Upgrade your Classic Mini with our Weld-In Competition Roll Cage Kit, engineered for track, rally, and high-performance builds. Designed for maximum strength and safety, this roll cage increases chassis rigidity while offering a precise fit. Whether you’re preparing for competition or simply improving your car’s handling, this cage provides the reinforcement needed for serious driving. Built with high-strength steel, our roll cages meet MSUK Blue Book safety regulations for club-level motorsport. For complete compliance details, refer to the MSUK Blue Book Regulations. 🔹 Custom Design Options for Every Build Every Mini is unique, so we offer four roll cage configurations to match your specific needs. Each design balances weight, strength, and safety, allowing you to choose the right setup for your car. ✔ JPC1.5 – A lightweight option with essential reinforcement ✔ JPC2 – Balanced strength, ideal for track and rally use ✔ JPC3 – Increased rigidity with additional bracing ✔ JPC4 – Maximum competition-spec protection 💡 Not sure which cage suits your build? See our Roll Cage Design Guide for more details. 🏆 What’s Included in the Classic Mini Weld-In Roll Cage Kit? Every kit includes precisely cut and marked components, ensuring a smooth installation process. ✔ Main Roll Bar – Essential structural support for impact resistance ✔ A-Pillar Bars – Reinforces the front of the car for improved safety ✔ Front Roof Bar – Adds overhead protection in case of rollovers ✔ Rear Stays – Enhances chassis rigidity and reduces flex ✔ Bracing (based on selected design) – Multiple configurations available for custom reinforcement ✔ Gusseting – Strengthens all intersections and pillar joints ✔ Mounting Plates/Boxes – Reinforces mounting points for maximum security ✔ CNC-Notched, Marked & Labelled Tubes – Ensures a precise fit for easy assembly ✔ Positioning Markers & Installation Guide (available on request) – Simplifies the welding and fitting process 💡 This cage is designed for professional installation. Ensure all welding is done by a qualified fabricator for the best results. 🔹 Why Choose a JP Cages Roll Cage? We design our roll cages with safety, durability, and ease of installation in mind. Unlike generic kits, each cage is built for a precise fit, reducing the effort required for alignment and welding. 🔹 Complies with MSUK Safety Regulations – Designed for club-level motorsport 🔹 Reinforced Mounting Points – Improves crash protection and structural integrity 🔹 Perfect for Performance Minis – Enhances handling, rigidity, and roll-over safety 🔹 CNC Precision-Cut Tubing – Ensures accuracy and seamless assembly 💡 Installing a roll cage not only increases safety but also enhances the car’s chassis stiffness, improving handling during high-speed driving. 🔹 Order Your Classic Mini Weld-In Roll Cage Today! Upgrade your Classic Mini with a race-proven roll cage, designed for motorsport safety and performance. 📦 Fast UK & International Shipping 🔧 Professional Installation Recommended – Contact Us for Advice! 🛒 Order Now from JP Cages! 🚗💨

GBP 667.80

1

Classic Mini Weld-In Roll Cage Kit – Motorsport-Ready Safety (Material: LIGHTWEIGHT BS4-T45 - Unapproved for competition, Design Options: JPC1.5 (sing

🏁 Classic Mini Weld-In Roll Cage Kit – Built for Motorsport & Performance! Upgrade your Classic Mini with our Weld-In Competition Roll Cage Kit, engineered for track, rally, and high-performance builds. Designed for maximum strength and safety, this roll cage increases chassis rigidity while offering a precise fit. Whether you’re preparing for competition or simply improving your car’s handling, this cage provides the reinforcement needed for serious driving. Built with high-strength steel, our roll cages meet MSUK Blue Book safety regulations for club-level motorsport. For complete compliance details, refer to the MSUK Blue Book Regulations. 🔹 Custom Design Options for Every Build Every Mini is unique, so we offer four roll cage configurations to match your specific needs. Each design balances weight, strength, and safety, allowing you to choose the right setup for your car. ✔ JPC1.5 – A lightweight option with essential reinforcement ✔ JPC2 – Balanced strength, ideal for track and rally use ✔ JPC3 – Increased rigidity with additional bracing ✔ JPC4 – Maximum competition-spec protection 💡 Not sure which cage suits your build? See our Roll Cage Design Guide for more details. 🏆 What’s Included in the Classic Mini Weld-In Roll Cage Kit? Every kit includes precisely cut and marked components, ensuring a smooth installation process. ✔ Main Roll Bar – Essential structural support for impact resistance ✔ A-Pillar Bars – Reinforces the front of the car for improved safety ✔ Front Roof Bar – Adds overhead protection in case of rollovers ✔ Rear Stays – Enhances chassis rigidity and reduces flex ✔ Bracing (based on selected design) – Multiple configurations available for custom reinforcement ✔ Gusseting – Strengthens all intersections and pillar joints ✔ Mounting Plates/Boxes – Reinforces mounting points for maximum security ✔ CNC-Notched, Marked & Labelled Tubes – Ensures a precise fit for easy assembly ✔ Positioning Markers & Installation Guide (available on request) – Simplifies the welding and fitting process 💡 This cage is designed for professional installation. Ensure all welding is done by a qualified fabricator for the best results. 🔹 Why Choose a JP Cages Roll Cage? We design our roll cages with safety, durability, and ease of installation in mind. Unlike generic kits, each cage is built for a precise fit, reducing the effort required for alignment and welding. 🔹 Complies with MSUK Safety Regulations – Designed for club-level motorsport 🔹 Reinforced Mounting Points – Improves crash protection and structural integrity 🔹 Perfect for Performance Minis – Enhances handling, rigidity, and roll-over safety 🔹 CNC Precision-Cut Tubing – Ensures accuracy and seamless assembly 💡 Installing a roll cage not only increases safety but also enhances the car’s chassis stiffness, improving handling during high-speed driving. 🔹 Order Your Classic Mini Weld-In Roll Cage Today! Upgrade your Classic Mini with a race-proven roll cage, designed for motorsport safety and performance. 📦 Fast UK & International Shipping 🔧 Professional Installation Recommended – Contact Us for Advice! 🛒 Order Now from JP Cages! 🚗💨

GBP 1002.00

1

Classic Mini Weld-In Roll Cage Kit – Motorsport-Ready Safety (Material: LIGHTWEIGHT BS4-T45 - Unapproved for competition, Design Options: JPC4 - X REA

🏁 Classic Mini Weld-In Roll Cage Kit – Built for Motorsport & Performance! Upgrade your Classic Mini with our Weld-In Competition Roll Cage Kit, engineered for track, rally, and high-performance builds. Designed for maximum strength and safety, this roll cage increases chassis rigidity while offering a precise fit. Whether you’re preparing for competition or simply improving your car’s handling, this cage provides the reinforcement needed for serious driving. Built with high-strength steel, our roll cages meet MSUK Blue Book safety regulations for club-level motorsport. For complete compliance details, refer to the MSUK Blue Book Regulations. 🔹 Custom Design Options for Every Build Every Mini is unique, so we offer four roll cage configurations to match your specific needs. Each design balances weight, strength, and safety, allowing you to choose the right setup for your car. ✔ JPC1.5 – A lightweight option with essential reinforcement ✔ JPC2 – Balanced strength, ideal for track and rally use ✔ JPC3 – Increased rigidity with additional bracing ✔ JPC4 – Maximum competition-spec protection 💡 Not sure which cage suits your build? See our Roll Cage Design Guide for more details. 🏆 What’s Included in the Classic Mini Weld-In Roll Cage Kit? Every kit includes precisely cut and marked components, ensuring a smooth installation process. ✔ Main Roll Bar – Essential structural support for impact resistance ✔ A-Pillar Bars – Reinforces the front of the car for improved safety ✔ Front Roof Bar – Adds overhead protection in case of rollovers ✔ Rear Stays – Enhances chassis rigidity and reduces flex ✔ Bracing (based on selected design) – Multiple configurations available for custom reinforcement ✔ Gusseting – Strengthens all intersections and pillar joints ✔ Mounting Plates/Boxes – Reinforces mounting points for maximum security ✔ CNC-Notched, Marked & Labelled Tubes – Ensures a precise fit for easy assembly ✔ Positioning Markers & Installation Guide (available on request) – Simplifies the welding and fitting process 💡 This cage is designed for professional installation. Ensure all welding is done by a qualified fabricator for the best results. 🔹 Why Choose a JP Cages Roll Cage? We design our roll cages with safety, durability, and ease of installation in mind. Unlike generic kits, each cage is built for a precise fit, reducing the effort required for alignment and welding. 🔹 Complies with MSUK Safety Regulations – Designed for club-level motorsport 🔹 Reinforced Mounting Points – Improves crash protection and structural integrity 🔹 Perfect for Performance Minis – Enhances handling, rigidity, and roll-over safety 🔹 CNC Precision-Cut Tubing – Ensures accuracy and seamless assembly 💡 Installing a roll cage not only increases safety but also enhances the car’s chassis stiffness, improving handling during high-speed driving. 🔹 Order Your Classic Mini Weld-In Roll Cage Today! Upgrade your Classic Mini with a race-proven roll cage, designed for motorsport safety and performance. 📦 Fast UK & International Shipping 🔧 Professional Installation Recommended – Contact Us for Advice! 🛒 Order Now from JP Cages! 🚗💨

GBP 1418.40

1

Classic Mini Weld-In Roll Cage Kit – Motorsport-Ready Safety (Material: Standard CDS, Design Options: JPC3 - X rear, Double doorbars and centre brace)

🏁 Classic Mini Weld-In Roll Cage Kit – Built for Motorsport & Performance! Upgrade your Classic Mini with our Weld-In Competition Roll Cage Kit, engineered for track, rally, and high-performance builds. Designed for maximum strength and safety, this roll cage increases chassis rigidity while offering a precise fit. Whether you’re preparing for competition or simply improving your car’s handling, this cage provides the reinforcement needed for serious driving. Built with high-strength steel, our roll cages meet MSUK Blue Book safety regulations for club-level motorsport. For complete compliance details, refer to the MSUK Blue Book Regulations. 🔹 Custom Design Options for Every Build Every Mini is unique, so we offer four roll cage configurations to match your specific needs. Each design balances weight, strength, and safety, allowing you to choose the right setup for your car. ✔ JPC1.5 – A lightweight option with essential reinforcement ✔ JPC2 – Balanced strength, ideal for track and rally use ✔ JPC3 – Increased rigidity with additional bracing ✔ JPC4 – Maximum competition-spec protection 💡 Not sure which cage suits your build? See our Roll Cage Design Guide for more details. 🏆 What’s Included in the Classic Mini Weld-In Roll Cage Kit? Every kit includes precisely cut and marked components, ensuring a smooth installation process. ✔ Main Roll Bar – Essential structural support for impact resistance ✔ A-Pillar Bars – Reinforces the front of the car for improved safety ✔ Front Roof Bar – Adds overhead protection in case of rollovers ✔ Rear Stays – Enhances chassis rigidity and reduces flex ✔ Bracing (based on selected design) – Multiple configurations available for custom reinforcement ✔ Gusseting – Strengthens all intersections and pillar joints ✔ Mounting Plates/Boxes – Reinforces mounting points for maximum security ✔ CNC-Notched, Marked & Labelled Tubes – Ensures a precise fit for easy assembly ✔ Positioning Markers & Installation Guide (available on request) – Simplifies the welding and fitting process 💡 This cage is designed for professional installation. Ensure all welding is done by a qualified fabricator for the best results. 🔹 Why Choose a JP Cages Roll Cage? We design our roll cages with safety, durability, and ease of installation in mind. Unlike generic kits, each cage is built for a precise fit, reducing the effort required for alignment and welding. 🔹 Complies with MSUK Safety Regulations – Designed for club-level motorsport 🔹 Reinforced Mounting Points – Improves crash protection and structural integrity 🔹 Perfect for Performance Minis – Enhances handling, rigidity, and roll-over safety 🔹 CNC Precision-Cut Tubing – Ensures accuracy and seamless assembly 💡 Installing a roll cage not only increases safety but also enhances the car’s chassis stiffness, improving handling during high-speed driving. 🔹 Order Your Classic Mini Weld-In Roll Cage Today! Upgrade your Classic Mini with a race-proven roll cage, designed for motorsport safety and performance. 📦 Fast UK & International Shipping 🔧 Professional Installation Recommended – Contact Us for Advice! 🛒 Order Now from JP Cages! 🚗💨

GBP 882.00

1

Classic Mini Weld-In Roll Cage Kit – Motorsport-Ready Safety (Material: LIGHTWEIGHT BS4-T45 - Unapproved for competition, Design Options: JPC2 - Singl

🏁 Classic Mini Weld-In Roll Cage Kit – Built for Motorsport & Performance! Upgrade your Classic Mini with our Weld-In Competition Roll Cage Kit, engineered for track, rally, and high-performance builds. Designed for maximum strength and safety, this roll cage increases chassis rigidity while offering a precise fit. Whether you’re preparing for competition or simply improving your car’s handling, this cage provides the reinforcement needed for serious driving. Built with high-strength steel, our roll cages meet MSUK Blue Book safety regulations for club-level motorsport. For complete compliance details, refer to the MSUK Blue Book Regulations. 🔹 Custom Design Options for Every Build Every Mini is unique, so we offer four roll cage configurations to match your specific needs. Each design balances weight, strength, and safety, allowing you to choose the right setup for your car. ✔ JPC1.5 – A lightweight option with essential reinforcement ✔ JPC2 – Balanced strength, ideal for track and rally use ✔ JPC3 – Increased rigidity with additional bracing ✔ JPC4 – Maximum competition-spec protection 💡 Not sure which cage suits your build? See our Roll Cage Design Guide for more details. 🏆 What’s Included in the Classic Mini Weld-In Roll Cage Kit? Every kit includes precisely cut and marked components, ensuring a smooth installation process. ✔ Main Roll Bar – Essential structural support for impact resistance ✔ A-Pillar Bars – Reinforces the front of the car for improved safety ✔ Front Roof Bar – Adds overhead protection in case of rollovers ✔ Rear Stays – Enhances chassis rigidity and reduces flex ✔ Bracing (based on selected design) – Multiple configurations available for custom reinforcement ✔ Gusseting – Strengthens all intersections and pillar joints ✔ Mounting Plates/Boxes – Reinforces mounting points for maximum security ✔ CNC-Notched, Marked & Labelled Tubes – Ensures a precise fit for easy assembly ✔ Positioning Markers & Installation Guide (available on request) – Simplifies the welding and fitting process 💡 This cage is designed for professional installation. Ensure all welding is done by a qualified fabricator for the best results. 🔹 Why Choose a JP Cages Roll Cage? We design our roll cages with safety, durability, and ease of installation in mind. Unlike generic kits, each cage is built for a precise fit, reducing the effort required for alignment and welding. 🔹 Complies with MSUK Safety Regulations – Designed for club-level motorsport 🔹 Reinforced Mounting Points – Improves crash protection and structural integrity 🔹 Perfect for Performance Minis – Enhances handling, rigidity, and roll-over safety 🔹 CNC Precision-Cut Tubing – Ensures accuracy and seamless assembly 💡 Installing a roll cage not only increases safety but also enhances the car’s chassis stiffness, improving handling during high-speed driving. 🔹 Order Your Classic Mini Weld-In Roll Cage Today! Upgrade your Classic Mini with a race-proven roll cage, designed for motorsport safety and performance. 📦 Fast UK & International Shipping 🔧 Professional Installation Recommended – Contact Us for Advice! 🛒 Order Now from JP Cages! 🚗💨

GBP 1134.00

1

Classic Mini Weld-In Roll Cage Kit – Motorsport-Ready Safety (Material: Standard CDS, Design Options: JPC2 - Single Doorbars, X Rear)

🏁 Classic Mini Weld-In Roll Cage Kit – Built for Motorsport & Performance! Upgrade your Classic Mini with our Weld-In Competition Roll Cage Kit, engineered for track, rally, and high-performance builds. Designed for maximum strength and safety, this roll cage increases chassis rigidity while offering a precise fit. Whether you’re preparing for competition or simply improving your car’s handling, this cage provides the reinforcement needed for serious driving. Built with high-strength steel, our roll cages meet MSUK Blue Book safety regulations for club-level motorsport. For complete compliance details, refer to the MSUK Blue Book Regulations. 🔹 Custom Design Options for Every Build Every Mini is unique, so we offer four roll cage configurations to match your specific needs. Each design balances weight, strength, and safety, allowing you to choose the right setup for your car. ✔ JPC1.5 – A lightweight option with essential reinforcement ✔ JPC2 – Balanced strength, ideal for track and rally use ✔ JPC3 – Increased rigidity with additional bracing ✔ JPC4 – Maximum competition-spec protection 💡 Not sure which cage suits your build? See our Roll Cage Design Guide for more details. 🏆 What’s Included in the Classic Mini Weld-In Roll Cage Kit? Every kit includes precisely cut and marked components, ensuring a smooth installation process. ✔ Main Roll Bar – Essential structural support for impact resistance ✔ A-Pillar Bars – Reinforces the front of the car for improved safety ✔ Front Roof Bar – Adds overhead protection in case of rollovers ✔ Rear Stays – Enhances chassis rigidity and reduces flex ✔ Bracing (based on selected design) – Multiple configurations available for custom reinforcement ✔ Gusseting – Strengthens all intersections and pillar joints ✔ Mounting Plates/Boxes – Reinforces mounting points for maximum security ✔ CNC-Notched, Marked & Labelled Tubes – Ensures a precise fit for easy assembly ✔ Positioning Markers & Installation Guide (available on request) – Simplifies the welding and fitting process 💡 This cage is designed for professional installation. Ensure all welding is done by a qualified fabricator for the best results. 🔹 Why Choose a JP Cages Roll Cage? We design our roll cages with safety, durability, and ease of installation in mind. Unlike generic kits, each cage is built for a precise fit, reducing the effort required for alignment and welding. 🔹 Complies with MSUK Safety Regulations – Designed for club-level motorsport 🔹 Reinforced Mounting Points – Improves crash protection and structural integrity 🔹 Perfect for Performance Minis – Enhances handling, rigidity, and roll-over safety 🔹 CNC Precision-Cut Tubing – Ensures accuracy and seamless assembly 💡 Installing a roll cage not only increases safety but also enhances the car’s chassis stiffness, improving handling during high-speed driving. 🔹 Order Your Classic Mini Weld-In Roll Cage Today! Upgrade your Classic Mini with a race-proven roll cage, designed for motorsport safety and performance. 📦 Fast UK & International Shipping 🔧 Professional Installation Recommended – Contact Us for Advice! 🛒 Order Now from JP Cages! 🚗💨

GBP 756.00

1

Classic Mini Weld-In Roll Cage Kit – Motorsport-Ready Safety (Material: Standard CDS, Design Options: JPC4 - X REAR, DOUBLE DOORBARS, A PILLAR SUPPORT

🏁 Classic Mini Weld-In Roll Cage Kit – Built for Motorsport & Performance! Upgrade your Classic Mini with our Weld-In Competition Roll Cage Kit, engineered for track, rally, and high-performance builds. Designed for maximum strength and safety, this roll cage increases chassis rigidity while offering a precise fit. Whether you’re preparing for competition or simply improving your car’s handling, this cage provides the reinforcement needed for serious driving. Built with high-strength steel, our roll cages meet MSUK Blue Book safety regulations for club-level motorsport. For complete compliance details, refer to the MSUK Blue Book Regulations. 🔹 Custom Design Options for Every Build Every Mini is unique, so we offer four roll cage configurations to match your specific needs. Each design balances weight, strength, and safety, allowing you to choose the right setup for your car. ✔ JPC1.5 – A lightweight option with essential reinforcement ✔ JPC2 – Balanced strength, ideal for track and rally use ✔ JPC3 – Increased rigidity with additional bracing ✔ JPC4 – Maximum competition-spec protection 💡 Not sure which cage suits your build? See our Roll Cage Design Guide for more details. 🏆 What’s Included in the Classic Mini Weld-In Roll Cage Kit? Every kit includes precisely cut and marked components, ensuring a smooth installation process. ✔ Main Roll Bar – Essential structural support for impact resistance ✔ A-Pillar Bars – Reinforces the front of the car for improved safety ✔ Front Roof Bar – Adds overhead protection in case of rollovers ✔ Rear Stays – Enhances chassis rigidity and reduces flex ✔ Bracing (based on selected design) – Multiple configurations available for custom reinforcement ✔ Gusseting – Strengthens all intersections and pillar joints ✔ Mounting Plates/Boxes – Reinforces mounting points for maximum security ✔ CNC-Notched, Marked & Labelled Tubes – Ensures a precise fit for easy assembly ✔ Positioning Markers & Installation Guide (available on request) – Simplifies the welding and fitting process 💡 This cage is designed for professional installation. Ensure all welding is done by a qualified fabricator for the best results. 🔹 Why Choose a JP Cages Roll Cage? We design our roll cages with safety, durability, and ease of installation in mind. Unlike generic kits, each cage is built for a precise fit, reducing the effort required for alignment and welding. 🔹 Complies with MSUK Safety Regulations – Designed for club-level motorsport 🔹 Reinforced Mounting Points – Improves crash protection and structural integrity 🔹 Perfect for Performance Minis – Enhances handling, rigidity, and roll-over safety 🔹 CNC Precision-Cut Tubing – Ensures accuracy and seamless assembly 💡 Installing a roll cage not only increases safety but also enhances the car’s chassis stiffness, improving handling during high-speed driving. 🔹 Order Your Classic Mini Weld-In Roll Cage Today! Upgrade your Classic Mini with a race-proven roll cage, designed for motorsport safety and performance. 📦 Fast UK & International Shipping 🔧 Professional Installation Recommended – Contact Us for Advice! 🛒 Order Now from JP Cages! 🚗💨

GBP 945.00

1

Classic Mini Weld-In Roll Cage Kit – Motorsport-Ready Safety (Material: LIGHTWEIGHT BS4-T45 - Unapproved for competition, Design Options: JPC3 - X rea

🏁 Classic Mini Weld-In Roll Cage Kit – Built for Motorsport & Performance! Upgrade your Classic Mini with our Weld-In Competition Roll Cage Kit, engineered for track, rally, and high-performance builds. Designed for maximum strength and safety, this roll cage increases chassis rigidity while offering a precise fit. Whether you’re preparing for competition or simply improving your car’s handling, this cage provides the reinforcement needed for serious driving. Built with high-strength steel, our roll cages meet MSUK Blue Book safety regulations for club-level motorsport. For complete compliance details, refer to the MSUK Blue Book Regulations. 🔹 Custom Design Options for Every Build Every Mini is unique, so we offer four roll cage configurations to match your specific needs. Each design balances weight, strength, and safety, allowing you to choose the right setup for your car. ✔ JPC1.5 – A lightweight option with essential reinforcement ✔ JPC2 – Balanced strength, ideal for track and rally use ✔ JPC3 – Increased rigidity with additional bracing ✔ JPC4 – Maximum competition-spec protection 💡 Not sure which cage suits your build? See our Roll Cage Design Guide for more details. 🏆 What’s Included in the Classic Mini Weld-In Roll Cage Kit? Every kit includes precisely cut and marked components, ensuring a smooth installation process. ✔ Main Roll Bar – Essential structural support for impact resistance ✔ A-Pillar Bars – Reinforces the front of the car for improved safety ✔ Front Roof Bar – Adds overhead protection in case of rollovers ✔ Rear Stays – Enhances chassis rigidity and reduces flex ✔ Bracing (based on selected design) – Multiple configurations available for custom reinforcement ✔ Gusseting – Strengthens all intersections and pillar joints ✔ Mounting Plates/Boxes – Reinforces mounting points for maximum security ✔ CNC-Notched, Marked & Labelled Tubes – Ensures a precise fit for easy assembly ✔ Positioning Markers & Installation Guide (available on request) – Simplifies the welding and fitting process 💡 This cage is designed for professional installation. Ensure all welding is done by a qualified fabricator for the best results. 🔹 Why Choose a JP Cages Roll Cage? We design our roll cages with safety, durability, and ease of installation in mind. Unlike generic kits, each cage is built for a precise fit, reducing the effort required for alignment and welding. 🔹 Complies with MSUK Safety Regulations – Designed for club-level motorsport 🔹 Reinforced Mounting Points – Improves crash protection and structural integrity 🔹 Perfect for Performance Minis – Enhances handling, rigidity, and roll-over safety 🔹 CNC Precision-Cut Tubing – Ensures accuracy and seamless assembly 💡 Installing a roll cage not only increases safety but also enhances the car’s chassis stiffness, improving handling during high-speed driving. 🔹 Order Your Classic Mini Weld-In Roll Cage Today! Upgrade your Classic Mini with a race-proven roll cage, designed for motorsport safety and performance. 📦 Fast UK & International Shipping 🔧 Professional Installation Recommended – Contact Us for Advice! 🛒 Order Now from JP Cages! 🚗💨

GBP 1323.60

1

Mini R56 Bolt In Multipoint Competition Roll Cage (Design Options: JPC2 - Single Doorbars, X Rear)

🔧 Mini R56 Bolt-In Multipoint Roll Cage – MSUK-Approved for Competition! Take your Mini R56 to full competition spec with our MSUK-compliant bolt-in multipoint roll cage. This cage is engineered for track, rally, sprint, and hill climb events, delivering exceptional chassis rigidity, maximum driver protection, and competition-level durability. ✔ MSUK-Approved – Compliant for all Motorsport UK events ✔ Competition-Grade Safety – Designed for track, rally, and hill climbs ✔ Customisable Configurations – Available in six different designs ✔ Bolt-In Convenience – Secure fitment with MSUK-approved mounting plates ✔ Powder-Coated Finish – Choose from a range of colours ✔ Professional Fitting Available – Contact us for expert installation 💡 Need a weld-in alternative? Check out our Mini R56 Weld-In Roll Cage for permanent chassis reinforcement. 🔹 Choose Your Roll Cage Specification We offer six competition-ready configurations, allowing you to choose the best balance of protection, weight, and reinforcement for your build. 📌 JPC1.5 – Lightweight & Essential Protection ✔ Single Door Bars – Strengthens side impact zones ✔ Diagonal Rear Brace – Reinforces chassis rigidity ✔ Harness Bar – Secure mounting point for race harnesses 📌 JPC2 – Increased Chassis Strength ✔ Single Door Bars – Offers essential side protection ✔ X-Rear Brace – Improves rear-end stability ✔ Harness Bars – Provides a compliant harness mounting point 📌 JPC3 – Double Door Bar Safety ✔ Double Door Bars – Increased side-impact protection ✔ X-Rear Brace – Reinforces rear chassis rigidity ✔ Harness Bars – Ensures secure harness positioning 📌 JPC4 – Maximum Competition-Level Rigidity ✔ Double Door Bars & X-Rear Brace – Ultimate chassis reinforcement ✔ Harness Bars – Motorsport-compliant mounting points ✔ A-Pillar Supports – Strengthens front impact zones 📌 JPC4.5 – Enhanced Roof & Side Bracing ✔ Double Door Bars & X-Rear Brace – Maximum driver safety ✔ Harness Bars & A-Pillar Supports – Front-end reinforcement ✔ Diagonal Roof Brace – Additional roll-over protection 📌 JPC5 – Full FIA-Level Reinforcement ✔ Double Door Bars & X-Rear Brace – Ultimate crash safety ✔ Harness Bars & A-Pillar Supports – Additional front chassis support ✔ X-Roof Bracing – The strongest roll cage design for extreme motorsport conditions 💡 Not sure which configuration suits your build? Contact us for advice or check out our Roll Cage Specification Guide. 🔹 Built for Performance – Engineered for Safety Our Mini R56 Bolt-In Multipoint Roll Cage is precision-engineered for maximum strength and compliance, providing chassis reinforcement while protecting the driver in high-performance conditions. ✔ Fully MSUK Compliant – Approved for competitive racing ✔ CNC-Bent & Notched Tubing – Ensures a precise and tight fit ✔ High-Strength Steel – Designed for safety and longevity ✔ MSUK-Spec Mounting Plates Included – Welded into place for a secure installation 💡 For full compliance details, refer to the MSUK Blue Book Regulations on roll cage requirements. 🔹 Installation & Fitment Guide This bolt-in multipoint roll cage is designed for easy installation, requiring MSUK-compliant mounting plates to be welded into place before bolting in the cage. 🔧 Installation Overview: 1️⃣ Prepare the interior – Remove seats & trim to access the mounting areas 2️⃣ Weld the MSUK-spec mounting plates into place 3️⃣ Assemble & bolt the cage into position

GBP 1121.40

1

Mini R56 Bolt In Multipoint Competition Roll Cage (Colour: Specific Metallic RAL, Design Options: JPC3 - X rear, Double doorbars and centre brace)

🔧 Mini R56 Bolt-In Multipoint Roll Cage – MSUK-Approved for Competition! Take your Mini R56 to full competition spec with our MSUK-compliant bolt-in multipoint roll cage. This cage is engineered for track, rally, sprint, and hill climb events, delivering exceptional chassis rigidity, maximum driver protection, and competition-level durability. ✔ MSUK-Approved – Compliant for all Motorsport UK events ✔ Competition-Grade Safety – Designed for track, rally, and hill climbs ✔ Customisable Configurations – Available in six different designs ✔ Bolt-In Convenience – Secure fitment with MSUK-approved mounting plates ✔ Powder-Coated Finish – Choose from a range of colours ✔ Professional Fitting Available – Contact us for expert installation 💡 Need a weld-in alternative? Check out our Mini R56 Weld-In Roll Cage for permanent chassis reinforcement. 🔹 Choose Your Roll Cage Specification We offer six competition-ready configurations, allowing you to choose the best balance of protection, weight, and reinforcement for your build. 📌 JPC1.5 – Lightweight & Essential Protection ✔ Single Door Bars – Strengthens side impact zones ✔ Diagonal Rear Brace – Reinforces chassis rigidity ✔ Harness Bar – Secure mounting point for race harnesses 📌 JPC2 – Increased Chassis Strength ✔ Single Door Bars – Offers essential side protection ✔ X-Rear Brace – Improves rear-end stability ✔ Harness Bars – Provides a compliant harness mounting point 📌 JPC3 – Double Door Bar Safety ✔ Double Door Bars – Increased side-impact protection ✔ X-Rear Brace – Reinforces rear chassis rigidity ✔ Harness Bars – Ensures secure harness positioning 📌 JPC4 – Maximum Competition-Level Rigidity ✔ Double Door Bars & X-Rear Brace – Ultimate chassis reinforcement ✔ Harness Bars – Motorsport-compliant mounting points ✔ A-Pillar Supports – Strengthens front impact zones 📌 JPC4.5 – Enhanced Roof & Side Bracing ✔ Double Door Bars & X-Rear Brace – Maximum driver safety ✔ Harness Bars & A-Pillar Supports – Front-end reinforcement ✔ Diagonal Roof Brace – Additional roll-over protection 📌 JPC5 – Full FIA-Level Reinforcement ✔ Double Door Bars & X-Rear Brace – Ultimate crash safety ✔ Harness Bars & A-Pillar Supports – Additional front chassis support ✔ X-Roof Bracing – The strongest roll cage design for extreme motorsport conditions 💡 Not sure which configuration suits your build? Contact us for advice or check out our Roll Cage Specification Guide. 🔹 Built for Performance – Engineered for Safety Our Mini R56 Bolt-In Multipoint Roll Cage is precision-engineered for maximum strength and compliance, providing chassis reinforcement while protecting the driver in high-performance conditions. ✔ Fully MSUK Compliant – Approved for competitive racing ✔ CNC-Bent & Notched Tubing – Ensures a precise and tight fit ✔ High-Strength Steel – Designed for safety and longevity ✔ MSUK-Spec Mounting Plates Included – Welded into place for a secure installation 💡 For full compliance details, refer to the MSUK Blue Book Regulations on roll cage requirements. 🔹 Installation & Fitment Guide This bolt-in multipoint roll cage is designed for easy installation, requiring MSUK-compliant mounting plates to be welded into place before bolting in the cage. 🔧 Installation Overview: 1️⃣ Prepare the interior – Remove seats & trim to access the mounting areas 2️⃣ Weld the MSUK-spec mounting plates into place 3️⃣ Assemble & bolt the cage into position

GBP 1423.80

1

Mini R56 Bolt In Multipoint Competition Roll Cage (Colour: Specific Metallic RAL, Design Options: JPC5 - JPC4 with X roof)

🔧 Mini R56 Bolt-In Multipoint Roll Cage – MSUK-Approved for Competition! Take your Mini R56 to full competition spec with our MSUK-compliant bolt-in multipoint roll cage. This cage is engineered for track, rally, sprint, and hill climb events, delivering exceptional chassis rigidity, maximum driver protection, and competition-level durability. ✔ MSUK-Approved – Compliant for all Motorsport UK events ✔ Competition-Grade Safety – Designed for track, rally, and hill climbs ✔ Customisable Configurations – Available in six different designs ✔ Bolt-In Convenience – Secure fitment with MSUK-approved mounting plates ✔ Powder-Coated Finish – Choose from a range of colours ✔ Professional Fitting Available – Contact us for expert installation 💡 Need a weld-in alternative? Check out our Mini R56 Weld-In Roll Cage for permanent chassis reinforcement. 🔹 Choose Your Roll Cage Specification We offer six competition-ready configurations, allowing you to choose the best balance of protection, weight, and reinforcement for your build. 📌 JPC1.5 – Lightweight & Essential Protection ✔ Single Door Bars – Strengthens side impact zones ✔ Diagonal Rear Brace – Reinforces chassis rigidity ✔ Harness Bar – Secure mounting point for race harnesses 📌 JPC2 – Increased Chassis Strength ✔ Single Door Bars – Offers essential side protection ✔ X-Rear Brace – Improves rear-end stability ✔ Harness Bars – Provides a compliant harness mounting point 📌 JPC3 – Double Door Bar Safety ✔ Double Door Bars – Increased side-impact protection ✔ X-Rear Brace – Reinforces rear chassis rigidity ✔ Harness Bars – Ensures secure harness positioning 📌 JPC4 – Maximum Competition-Level Rigidity ✔ Double Door Bars & X-Rear Brace – Ultimate chassis reinforcement ✔ Harness Bars – Motorsport-compliant mounting points ✔ A-Pillar Supports – Strengthens front impact zones 📌 JPC4.5 – Enhanced Roof & Side Bracing ✔ Double Door Bars & X-Rear Brace – Maximum driver safety ✔ Harness Bars & A-Pillar Supports – Front-end reinforcement ✔ Diagonal Roof Brace – Additional roll-over protection 📌 JPC5 – Full FIA-Level Reinforcement ✔ Double Door Bars & X-Rear Brace – Ultimate crash safety ✔ Harness Bars & A-Pillar Supports – Additional front chassis support ✔ X-Roof Bracing – The strongest roll cage design for extreme motorsport conditions 💡 Not sure which configuration suits your build? Contact us for advice or check out our Roll Cage Specification Guide. 🔹 Built for Performance – Engineered for Safety Our Mini R56 Bolt-In Multipoint Roll Cage is precision-engineered for maximum strength and compliance, providing chassis reinforcement while protecting the driver in high-performance conditions. ✔ Fully MSUK Compliant – Approved for competitive racing ✔ CNC-Bent & Notched Tubing – Ensures a precise and tight fit ✔ High-Strength Steel – Designed for safety and longevity ✔ MSUK-Spec Mounting Plates Included – Welded into place for a secure installation 💡 For full compliance details, refer to the MSUK Blue Book Regulations on roll cage requirements. 🔹 Installation & Fitment Guide This bolt-in multipoint roll cage is designed for easy installation, requiring MSUK-compliant mounting plates to be welded into place before bolting in the cage. 🔧 Installation Overview: 1️⃣ Prepare the interior – Remove seats & trim to access the mounting areas 2️⃣ Weld the MSUK-spec mounting plates into place 3️⃣ Assemble & bolt the cage into position

GBP 1713.60

1

Mini R56 Bolt In Multipoint Competition Roll Cage (Design Options: JPC1.5 (single diagonal, harness bar and single doorbars))

🔧 Mini R56 Bolt-In Multipoint Roll Cage – MSUK-Approved for Competition! Take your Mini R56 to full competition spec with our MSUK-compliant bolt-in multipoint roll cage. This cage is engineered for track, rally, sprint, and hill climb events, delivering exceptional chassis rigidity, maximum driver protection, and competition-level durability. ✔ MSUK-Approved – Compliant for all Motorsport UK events ✔ Competition-Grade Safety – Designed for track, rally, and hill climbs ✔ Customisable Configurations – Available in six different designs ✔ Bolt-In Convenience – Secure fitment with MSUK-approved mounting plates ✔ Powder-Coated Finish – Choose from a range of colours ✔ Professional Fitting Available – Contact us for expert installation 💡 Need a weld-in alternative? Check out our Mini R56 Weld-In Roll Cage for permanent chassis reinforcement. 🔹 Choose Your Roll Cage Specification We offer six competition-ready configurations, allowing you to choose the best balance of protection, weight, and reinforcement for your build. 📌 JPC1.5 – Lightweight & Essential Protection ✔ Single Door Bars – Strengthens side impact zones ✔ Diagonal Rear Brace – Reinforces chassis rigidity ✔ Harness Bar – Secure mounting point for race harnesses 📌 JPC2 – Increased Chassis Strength ✔ Single Door Bars – Offers essential side protection ✔ X-Rear Brace – Improves rear-end stability ✔ Harness Bars – Provides a compliant harness mounting point 📌 JPC3 – Double Door Bar Safety ✔ Double Door Bars – Increased side-impact protection ✔ X-Rear Brace – Reinforces rear chassis rigidity ✔ Harness Bars – Ensures secure harness positioning 📌 JPC4 – Maximum Competition-Level Rigidity ✔ Double Door Bars & X-Rear Brace – Ultimate chassis reinforcement ✔ Harness Bars – Motorsport-compliant mounting points ✔ A-Pillar Supports – Strengthens front impact zones 📌 JPC4.5 – Enhanced Roof & Side Bracing ✔ Double Door Bars & X-Rear Brace – Maximum driver safety ✔ Harness Bars & A-Pillar Supports – Front-end reinforcement ✔ Diagonal Roof Brace – Additional roll-over protection 📌 JPC5 – Full FIA-Level Reinforcement ✔ Double Door Bars & X-Rear Brace – Ultimate crash safety ✔ Harness Bars & A-Pillar Supports – Additional front chassis support ✔ X-Roof Bracing – The strongest roll cage design for extreme motorsport conditions 💡 Not sure which configuration suits your build? Contact us for advice or check out our Roll Cage Specification Guide. 🔹 Built for Performance – Engineered for Safety Our Mini R56 Bolt-In Multipoint Roll Cage is precision-engineered for maximum strength and compliance, providing chassis reinforcement while protecting the driver in high-performance conditions. ✔ Fully MSUK Compliant – Approved for competitive racing ✔ CNC-Bent & Notched Tubing – Ensures a precise and tight fit ✔ High-Strength Steel – Designed for safety and longevity ✔ MSUK-Spec Mounting Plates Included – Welded into place for a secure installation 💡 For full compliance details, refer to the MSUK Blue Book Regulations on roll cage requirements. 🔹 Installation & Fitment Guide This bolt-in multipoint roll cage is designed for easy installation, requiring MSUK-compliant mounting plates to be welded into place before bolting in the cage. 🔧 Installation Overview: 1️⃣ Prepare the interior – Remove seats & trim to access the mounting areas 2️⃣ Weld the MSUK-spec mounting plates into place 3️⃣ Assemble & bolt the cage into position

GBP 1045.80

1

Mini R56 Bolt In Multipoint Competition Roll Cage (Colour: Unpainted, Design Options: JPC4 - With A Pillar Supports)

🔧 Mini R56 Bolt-In Multipoint Roll Cage – MSUK-Approved for Competition! Take your Mini R56 to full competition spec with our MSUK-compliant bolt-in multipoint roll cage. This cage is engineered for track, rally, sprint, and hill climb events, delivering exceptional chassis rigidity, maximum driver protection, and competition-level durability. ✔ MSUK-Approved – Compliant for all Motorsport UK events ✔ Competition-Grade Safety – Designed for track, rally, and hill climbs ✔ Customisable Configurations – Available in six different designs ✔ Bolt-In Convenience – Secure fitment with MSUK-approved mounting plates ✔ Powder-Coated Finish – Choose from a range of colours ✔ Professional Fitting Available – Contact us for expert installation 💡 Need a weld-in alternative? Check out our Mini R56 Weld-In Roll Cage for permanent chassis reinforcement. 🔹 Choose Your Roll Cage Specification We offer six competition-ready configurations, allowing you to choose the best balance of protection, weight, and reinforcement for your build. 📌 JPC1.5 – Lightweight & Essential Protection ✔ Single Door Bars – Strengthens side impact zones ✔ Diagonal Rear Brace – Reinforces chassis rigidity ✔ Harness Bar – Secure mounting point for race harnesses 📌 JPC2 – Increased Chassis Strength ✔ Single Door Bars – Offers essential side protection ✔ X-Rear Brace – Improves rear-end stability ✔ Harness Bars – Provides a compliant harness mounting point 📌 JPC3 – Double Door Bar Safety ✔ Double Door Bars – Increased side-impact protection ✔ X-Rear Brace – Reinforces rear chassis rigidity ✔ Harness Bars – Ensures secure harness positioning 📌 JPC4 – Maximum Competition-Level Rigidity ✔ Double Door Bars & X-Rear Brace – Ultimate chassis reinforcement ✔ Harness Bars – Motorsport-compliant mounting points ✔ A-Pillar Supports – Strengthens front impact zones 📌 JPC4.5 – Enhanced Roof & Side Bracing ✔ Double Door Bars & X-Rear Brace – Maximum driver safety ✔ Harness Bars & A-Pillar Supports – Front-end reinforcement ✔ Diagonal Roof Brace – Additional roll-over protection 📌 JPC5 – Full FIA-Level Reinforcement ✔ Double Door Bars & X-Rear Brace – Ultimate crash safety ✔ Harness Bars & A-Pillar Supports – Additional front chassis support ✔ X-Roof Bracing – The strongest roll cage design for extreme motorsport conditions 💡 Not sure which configuration suits your build? Contact us for advice or check out our Roll Cage Specification Guide. 🔹 Built for Performance – Engineered for Safety Our Mini R56 Bolt-In Multipoint Roll Cage is precision-engineered for maximum strength and compliance, providing chassis reinforcement while protecting the driver in high-performance conditions. ✔ Fully MSUK Compliant – Approved for competitive racing ✔ CNC-Bent & Notched Tubing – Ensures a precise and tight fit ✔ High-Strength Steel – Designed for safety and longevity ✔ MSUK-Spec Mounting Plates Included – Welded into place for a secure installation 💡 For full compliance details, refer to the MSUK Blue Book Regulations on roll cage requirements. 🔹 Installation & Fitment Guide This bolt-in multipoint roll cage is designed for easy installation, requiring MSUK-compliant mounting plates to be welded into place before bolting in the cage. 🔧 Installation Overview: 1️⃣ Prepare the interior – Remove seats & trim to access the mounting areas 2️⃣ Weld the MSUK-spec mounting plates into place 3️⃣ Assemble & bolt the cage into position

GBP 1260.00

1

Mini R56 Bolt In Multipoint Competition Roll Cage (Colour: Unpainted, Design Options: JPC2 - Single Doorbars, X Rear)

🔧 Mini R56 Bolt-In Multipoint Roll Cage – MSUK-Approved for Competition! Take your Mini R56 to full competition spec with our MSUK-compliant bolt-in multipoint roll cage. This cage is engineered for track, rally, sprint, and hill climb events, delivering exceptional chassis rigidity, maximum driver protection, and competition-level durability. ✔ MSUK-Approved – Compliant for all Motorsport UK events ✔ Competition-Grade Safety – Designed for track, rally, and hill climbs ✔ Customisable Configurations – Available in six different designs ✔ Bolt-In Convenience – Secure fitment with MSUK-approved mounting plates ✔ Powder-Coated Finish – Choose from a range of colours ✔ Professional Fitting Available – Contact us for expert installation 💡 Need a weld-in alternative? Check out our Mini R56 Weld-In Roll Cage for permanent chassis reinforcement. 🔹 Choose Your Roll Cage Specification We offer six competition-ready configurations, allowing you to choose the best balance of protection, weight, and reinforcement for your build. 📌 JPC1.5 – Lightweight & Essential Protection ✔ Single Door Bars – Strengthens side impact zones ✔ Diagonal Rear Brace – Reinforces chassis rigidity ✔ Harness Bar – Secure mounting point for race harnesses 📌 JPC2 – Increased Chassis Strength ✔ Single Door Bars – Offers essential side protection ✔ X-Rear Brace – Improves rear-end stability ✔ Harness Bars – Provides a compliant harness mounting point 📌 JPC3 – Double Door Bar Safety ✔ Double Door Bars – Increased side-impact protection ✔ X-Rear Brace – Reinforces rear chassis rigidity ✔ Harness Bars – Ensures secure harness positioning 📌 JPC4 – Maximum Competition-Level Rigidity ✔ Double Door Bars & X-Rear Brace – Ultimate chassis reinforcement ✔ Harness Bars – Motorsport-compliant mounting points ✔ A-Pillar Supports – Strengthens front impact zones 📌 JPC4.5 – Enhanced Roof & Side Bracing ✔ Double Door Bars & X-Rear Brace – Maximum driver safety ✔ Harness Bars & A-Pillar Supports – Front-end reinforcement ✔ Diagonal Roof Brace – Additional roll-over protection 📌 JPC5 – Full FIA-Level Reinforcement ✔ Double Door Bars & X-Rear Brace – Ultimate crash safety ✔ Harness Bars & A-Pillar Supports – Additional front chassis support ✔ X-Roof Bracing – The strongest roll cage design for extreme motorsport conditions 💡 Not sure which configuration suits your build? Contact us for advice or check out our Roll Cage Specification Guide. 🔹 Built for Performance – Engineered for Safety Our Mini R56 Bolt-In Multipoint Roll Cage is precision-engineered for maximum strength and compliance, providing chassis reinforcement while protecting the driver in high-performance conditions. ✔ Fully MSUK Compliant – Approved for competitive racing ✔ CNC-Bent & Notched Tubing – Ensures a precise and tight fit ✔ High-Strength Steel – Designed for safety and longevity ✔ MSUK-Spec Mounting Plates Included – Welded into place for a secure installation 💡 For full compliance details, refer to the MSUK Blue Book Regulations on roll cage requirements. 🔹 Installation & Fitment Guide This bolt-in multipoint roll cage is designed for easy installation, requiring MSUK-compliant mounting plates to be welded into place before bolting in the cage. 🔧 Installation Overview: 1️⃣ Prepare the interior – Remove seats & trim to access the mounting areas 2️⃣ Weld the MSUK-spec mounting plates into place 3️⃣ Assemble & bolt the cage into position

GBP 882.00

1

Mini R56 Bolt In Multipoint Competition Roll Cage (Design Options: JPC4.5 - JPC4 with Diagonal roof)

🔧 Mini R56 Bolt-In Multipoint Roll Cage – MSUK-Approved for Competition! Take your Mini R56 to full competition spec with our MSUK-compliant bolt-in multipoint roll cage. This cage is engineered for track, rally, sprint, and hill climb events, delivering exceptional chassis rigidity, maximum driver protection, and competition-level durability. ✔ MSUK-Approved – Compliant for all Motorsport UK events ✔ Competition-Grade Safety – Designed for track, rally, and hill climbs ✔ Customisable Configurations – Available in six different designs ✔ Bolt-In Convenience – Secure fitment with MSUK-approved mounting plates ✔ Powder-Coated Finish – Choose from a range of colours ✔ Professional Fitting Available – Contact us for expert installation 💡 Need a weld-in alternative? Check out our Mini R56 Weld-In Roll Cage for permanent chassis reinforcement. 🔹 Choose Your Roll Cage Specification We offer six competition-ready configurations, allowing you to choose the best balance of protection, weight, and reinforcement for your build. 📌 JPC1.5 – Lightweight & Essential Protection ✔ Single Door Bars – Strengthens side impact zones ✔ Diagonal Rear Brace – Reinforces chassis rigidity ✔ Harness Bar – Secure mounting point for race harnesses 📌 JPC2 – Increased Chassis Strength ✔ Single Door Bars – Offers essential side protection ✔ X-Rear Brace – Improves rear-end stability ✔ Harness Bars – Provides a compliant harness mounting point 📌 JPC3 – Double Door Bar Safety ✔ Double Door Bars – Increased side-impact protection ✔ X-Rear Brace – Reinforces rear chassis rigidity ✔ Harness Bars – Ensures secure harness positioning 📌 JPC4 – Maximum Competition-Level Rigidity ✔ Double Door Bars & X-Rear Brace – Ultimate chassis reinforcement ✔ Harness Bars – Motorsport-compliant mounting points ✔ A-Pillar Supports – Strengthens front impact zones 📌 JPC4.5 – Enhanced Roof & Side Bracing ✔ Double Door Bars & X-Rear Brace – Maximum driver safety ✔ Harness Bars & A-Pillar Supports – Front-end reinforcement ✔ Diagonal Roof Brace – Additional roll-over protection 📌 JPC5 – Full FIA-Level Reinforcement ✔ Double Door Bars & X-Rear Brace – Ultimate crash safety ✔ Harness Bars & A-Pillar Supports – Additional front chassis support ✔ X-Roof Bracing – The strongest roll cage design for extreme motorsport conditions 💡 Not sure which configuration suits your build? Contact us for advice or check out our Roll Cage Specification Guide. 🔹 Built for Performance – Engineered for Safety Our Mini R56 Bolt-In Multipoint Roll Cage is precision-engineered for maximum strength and compliance, providing chassis reinforcement while protecting the driver in high-performance conditions. ✔ Fully MSUK Compliant – Approved for competitive racing ✔ CNC-Bent & Notched Tubing – Ensures a precise and tight fit ✔ High-Strength Steel – Designed for safety and longevity ✔ MSUK-Spec Mounting Plates Included – Welded into place for a secure installation 💡 For full compliance details, refer to the MSUK Blue Book Regulations on roll cage requirements. 🔹 Installation & Fitment Guide This bolt-in multipoint roll cage is designed for easy installation, requiring MSUK-compliant mounting plates to be welded into place before bolting in the cage. 🔧 Installation Overview: 1️⃣ Prepare the interior – Remove seats & trim to access the mounting areas 2️⃣ Weld the MSUK-spec mounting plates into place 3️⃣ Assemble & bolt the cage into position

GBP 1486.80

1

Mini R56 Bolt In Multipoint Competition Roll Cage (Design Options: JPC2 - Single Doorbars, X Rear)

🔧 Mini R56 Bolt-In Multipoint Roll Cage – MSUK-Approved for Competition! Take your Mini R56 to full competition spec with our MSUK-compliant bolt-in multipoint roll cage. This cage is engineered for track, rally, sprint, and hill climb events, delivering exceptional chassis rigidity, maximum driver protection, and competition-level durability. ✔ MSUK-Approved – Compliant for all Motorsport UK events ✔ Competition-Grade Safety – Designed for track, rally, and hill climbs ✔ Customisable Configurations – Available in six different designs ✔ Bolt-In Convenience – Secure fitment with MSUK-approved mounting plates ✔ Powder-Coated Finish – Choose from a range of colours ✔ Professional Fitting Available – Contact us for expert installation 💡 Need a weld-in alternative? Check out our Mini R56 Weld-In Roll Cage for permanent chassis reinforcement. 🔹 Choose Your Roll Cage Specification We offer six competition-ready configurations, allowing you to choose the best balance of protection, weight, and reinforcement for your build. 📌 JPC1.5 – Lightweight & Essential Protection ✔ Single Door Bars – Strengthens side impact zones ✔ Diagonal Rear Brace – Reinforces chassis rigidity ✔ Harness Bar – Secure mounting point for race harnesses 📌 JPC2 – Increased Chassis Strength ✔ Single Door Bars – Offers essential side protection ✔ X-Rear Brace – Improves rear-end stability ✔ Harness Bars – Provides a compliant harness mounting point 📌 JPC3 – Double Door Bar Safety ✔ Double Door Bars – Increased side-impact protection ✔ X-Rear Brace – Reinforces rear chassis rigidity ✔ Harness Bars – Ensures secure harness positioning 📌 JPC4 – Maximum Competition-Level Rigidity ✔ Double Door Bars & X-Rear Brace – Ultimate chassis reinforcement ✔ Harness Bars – Motorsport-compliant mounting points ✔ A-Pillar Supports – Strengthens front impact zones 📌 JPC4.5 – Enhanced Roof & Side Bracing ✔ Double Door Bars & X-Rear Brace – Maximum driver safety ✔ Harness Bars & A-Pillar Supports – Front-end reinforcement ✔ Diagonal Roof Brace – Additional roll-over protection 📌 JPC5 – Full FIA-Level Reinforcement ✔ Double Door Bars & X-Rear Brace – Ultimate crash safety ✔ Harness Bars & A-Pillar Supports – Additional front chassis support ✔ X-Roof Bracing – The strongest roll cage design for extreme motorsport conditions 💡 Not sure which configuration suits your build? Contact us for advice or check out our Roll Cage Specification Guide. 🔹 Built for Performance – Engineered for Safety Our Mini R56 Bolt-In Multipoint Roll Cage is precision-engineered for maximum strength and compliance, providing chassis reinforcement while protecting the driver in high-performance conditions. ✔ Fully MSUK Compliant – Approved for competitive racing ✔ CNC-Bent & Notched Tubing – Ensures a precise and tight fit ✔ High-Strength Steel – Designed for safety and longevity ✔ MSUK-Spec Mounting Plates Included – Welded into place for a secure installation 💡 For full compliance details, refer to the MSUK Blue Book Regulations on roll cage requirements. 🔹 Installation & Fitment Guide This bolt-in multipoint roll cage is designed for easy installation, requiring MSUK-compliant mounting plates to be welded into place before bolting in the cage. 🔧 Installation Overview: 1️⃣ Prepare the interior – Remove seats & trim to access the mounting areas 2️⃣ Weld the MSUK-spec mounting plates into place 3️⃣ Assemble & bolt the cage into position

GBP 1008.00

1

Mini R56 Bolt In Multipoint Competition Roll Cage (Colour: Unpainted, Design Options: JPC1.5 (single diagonal, harness bar and single doorbars))

🔧 Mini R56 Bolt-In Multipoint Roll Cage – MSUK-Approved for Competition! Take your Mini R56 to full competition spec with our MSUK-compliant bolt-in multipoint roll cage. This cage is engineered for track, rally, sprint, and hill climb events, delivering exceptional chassis rigidity, maximum driver protection, and competition-level durability. ✔ MSUK-Approved – Compliant for all Motorsport UK events ✔ Competition-Grade Safety – Designed for track, rally, and hill climbs ✔ Customisable Configurations – Available in six different designs ✔ Bolt-In Convenience – Secure fitment with MSUK-approved mounting plates ✔ Powder-Coated Finish – Choose from a range of colours ✔ Professional Fitting Available – Contact us for expert installation 💡 Need a weld-in alternative? Check out our Mini R56 Weld-In Roll Cage for permanent chassis reinforcement. 🔹 Choose Your Roll Cage Specification We offer six competition-ready configurations, allowing you to choose the best balance of protection, weight, and reinforcement for your build. 📌 JPC1.5 – Lightweight & Essential Protection ✔ Single Door Bars – Strengthens side impact zones ✔ Diagonal Rear Brace – Reinforces chassis rigidity ✔ Harness Bar – Secure mounting point for race harnesses 📌 JPC2 – Increased Chassis Strength ✔ Single Door Bars – Offers essential side protection ✔ X-Rear Brace – Improves rear-end stability ✔ Harness Bars – Provides a compliant harness mounting point 📌 JPC3 – Double Door Bar Safety ✔ Double Door Bars – Increased side-impact protection ✔ X-Rear Brace – Reinforces rear chassis rigidity ✔ Harness Bars – Ensures secure harness positioning 📌 JPC4 – Maximum Competition-Level Rigidity ✔ Double Door Bars & X-Rear Brace – Ultimate chassis reinforcement ✔ Harness Bars – Motorsport-compliant mounting points ✔ A-Pillar Supports – Strengthens front impact zones 📌 JPC4.5 – Enhanced Roof & Side Bracing ✔ Double Door Bars & X-Rear Brace – Maximum driver safety ✔ Harness Bars & A-Pillar Supports – Front-end reinforcement ✔ Diagonal Roof Brace – Additional roll-over protection 📌 JPC5 – Full FIA-Level Reinforcement ✔ Double Door Bars & X-Rear Brace – Ultimate crash safety ✔ Harness Bars & A-Pillar Supports – Additional front chassis support ✔ X-Roof Bracing – The strongest roll cage design for extreme motorsport conditions 💡 Not sure which configuration suits your build? Contact us for advice or check out our Roll Cage Specification Guide. 🔹 Built for Performance – Engineered for Safety Our Mini R56 Bolt-In Multipoint Roll Cage is precision-engineered for maximum strength and compliance, providing chassis reinforcement while protecting the driver in high-performance conditions. ✔ Fully MSUK Compliant – Approved for competitive racing ✔ CNC-Bent & Notched Tubing – Ensures a precise and tight fit ✔ High-Strength Steel – Designed for safety and longevity ✔ MSUK-Spec Mounting Plates Included – Welded into place for a secure installation 💡 For full compliance details, refer to the MSUK Blue Book Regulations on roll cage requirements. 🔹 Installation & Fitment Guide This bolt-in multipoint roll cage is designed for easy installation, requiring MSUK-compliant mounting plates to be welded into place before bolting in the cage. 🔧 Installation Overview: 1️⃣ Prepare the interior – Remove seats & trim to access the mounting areas 2️⃣ Weld the MSUK-spec mounting plates into place 3️⃣ Assemble & bolt the cage into position

GBP 756.00

1

Mini R56 Bolt In Multipoint Competition Roll Cage (Design Options: JPC4 - With A Pillar Supports)

🔧 Mini R56 Bolt-In Multipoint Roll Cage – MSUK-Approved for Competition! Take your Mini R56 to full competition spec with our MSUK-compliant bolt-in multipoint roll cage. This cage is engineered for track, rally, sprint, and hill climb events, delivering exceptional chassis rigidity, maximum driver protection, and competition-level durability. ✔ MSUK-Approved – Compliant for all Motorsport UK events ✔ Competition-Grade Safety – Designed for track, rally, and hill climbs ✔ Customisable Configurations – Available in six different designs ✔ Bolt-In Convenience – Secure fitment with MSUK-approved mounting plates ✔ Powder-Coated Finish – Choose from a range of colours ✔ Professional Fitting Available – Contact us for expert installation 💡 Need a weld-in alternative? Check out our Mini R56 Weld-In Roll Cage for permanent chassis reinforcement. 🔹 Choose Your Roll Cage Specification We offer six competition-ready configurations, allowing you to choose the best balance of protection, weight, and reinforcement for your build. 📌 JPC1.5 – Lightweight & Essential Protection ✔ Single Door Bars – Strengthens side impact zones ✔ Diagonal Rear Brace – Reinforces chassis rigidity ✔ Harness Bar – Secure mounting point for race harnesses 📌 JPC2 – Increased Chassis Strength ✔ Single Door Bars – Offers essential side protection ✔ X-Rear Brace – Improves rear-end stability ✔ Harness Bars – Provides a compliant harness mounting point 📌 JPC3 – Double Door Bar Safety ✔ Double Door Bars – Increased side-impact protection ✔ X-Rear Brace – Reinforces rear chassis rigidity ✔ Harness Bars – Ensures secure harness positioning 📌 JPC4 – Maximum Competition-Level Rigidity ✔ Double Door Bars & X-Rear Brace – Ultimate chassis reinforcement ✔ Harness Bars – Motorsport-compliant mounting points ✔ A-Pillar Supports – Strengthens front impact zones 📌 JPC4.5 – Enhanced Roof & Side Bracing ✔ Double Door Bars & X-Rear Brace – Maximum driver safety ✔ Harness Bars & A-Pillar Supports – Front-end reinforcement ✔ Diagonal Roof Brace – Additional roll-over protection 📌 JPC5 – Full FIA-Level Reinforcement ✔ Double Door Bars & X-Rear Brace – Ultimate crash safety ✔ Harness Bars & A-Pillar Supports – Additional front chassis support ✔ X-Roof Bracing – The strongest roll cage design for extreme motorsport conditions 💡 Not sure which configuration suits your build? Contact us for advice or check out our Roll Cage Specification Guide. 🔹 Built for Performance – Engineered for Safety Our Mini R56 Bolt-In Multipoint Roll Cage is precision-engineered for maximum strength and compliance, providing chassis reinforcement while protecting the driver in high-performance conditions. ✔ Fully MSUK Compliant – Approved for competitive racing ✔ CNC-Bent & Notched Tubing – Ensures a precise and tight fit ✔ High-Strength Steel – Designed for safety and longevity ✔ MSUK-Spec Mounting Plates Included – Welded into place for a secure installation 💡 For full compliance details, refer to the MSUK Blue Book Regulations on roll cage requirements. 🔹 Installation & Fitment Guide This bolt-in multipoint roll cage is designed for easy installation, requiring MSUK-compliant mounting plates to be welded into place before bolting in the cage. 🔧 Installation Overview: 1️⃣ Prepare the interior – Remove seats & trim to access the mounting areas 2️⃣ Weld the MSUK-spec mounting plates into place 3️⃣ Assemble & bolt the cage into position

GBP 1499.40

1

Mini R56 Bolt In Multipoint Competition Roll Cage (Design Options: JPC4.5 - JPC4 with Diagonal roof)

🔧 Mini R56 Bolt-In Multipoint Roll Cage – MSUK-Approved for Competition! Take your Mini R56 to full competition spec with our MSUK-compliant bolt-in multipoint roll cage. This cage is engineered for track, rally, sprint, and hill climb events, delivering exceptional chassis rigidity, maximum driver protection, and competition-level durability. ✔ MSUK-Approved – Compliant for all Motorsport UK events ✔ Competition-Grade Safety – Designed for track, rally, and hill climbs ✔ Customisable Configurations – Available in six different designs ✔ Bolt-In Convenience – Secure fitment with MSUK-approved mounting plates ✔ Powder-Coated Finish – Choose from a range of colours ✔ Professional Fitting Available – Contact us for expert installation 💡 Need a weld-in alternative? Check out our Mini R56 Weld-In Roll Cage for permanent chassis reinforcement. 🔹 Choose Your Roll Cage Specification We offer six competition-ready configurations, allowing you to choose the best balance of protection, weight, and reinforcement for your build. 📌 JPC1.5 – Lightweight & Essential Protection ✔ Single Door Bars – Strengthens side impact zones ✔ Diagonal Rear Brace – Reinforces chassis rigidity ✔ Harness Bar – Secure mounting point for race harnesses 📌 JPC2 – Increased Chassis Strength ✔ Single Door Bars – Offers essential side protection ✔ X-Rear Brace – Improves rear-end stability ✔ Harness Bars – Provides a compliant harness mounting point 📌 JPC3 – Double Door Bar Safety ✔ Double Door Bars – Increased side-impact protection ✔ X-Rear Brace – Reinforces rear chassis rigidity ✔ Harness Bars – Ensures secure harness positioning 📌 JPC4 – Maximum Competition-Level Rigidity ✔ Double Door Bars & X-Rear Brace – Ultimate chassis reinforcement ✔ Harness Bars – Motorsport-compliant mounting points ✔ A-Pillar Supports – Strengthens front impact zones 📌 JPC4.5 – Enhanced Roof & Side Bracing ✔ Double Door Bars & X-Rear Brace – Maximum driver safety ✔ Harness Bars & A-Pillar Supports – Front-end reinforcement ✔ Diagonal Roof Brace – Additional roll-over protection 📌 JPC5 – Full FIA-Level Reinforcement ✔ Double Door Bars & X-Rear Brace – Ultimate crash safety ✔ Harness Bars & A-Pillar Supports – Additional front chassis support ✔ X-Roof Bracing – The strongest roll cage design for extreme motorsport conditions 💡 Not sure which configuration suits your build? Contact us for advice or check out our Roll Cage Specification Guide. 🔹 Built for Performance – Engineered for Safety Our Mini R56 Bolt-In Multipoint Roll Cage is precision-engineered for maximum strength and compliance, providing chassis reinforcement while protecting the driver in high-performance conditions. ✔ Fully MSUK Compliant – Approved for competitive racing ✔ CNC-Bent & Notched Tubing – Ensures a precise and tight fit ✔ High-Strength Steel – Designed for safety and longevity ✔ MSUK-Spec Mounting Plates Included – Welded into place for a secure installation 💡 For full compliance details, refer to the MSUK Blue Book Regulations on roll cage requirements. 🔹 Installation & Fitment Guide This bolt-in multipoint roll cage is designed for easy installation, requiring MSUK-compliant mounting plates to be welded into place before bolting in the cage. 🔧 Installation Overview: 1️⃣ Prepare the interior – Remove seats & trim to access the mounting areas 2️⃣ Weld the MSUK-spec mounting plates into place 3️⃣ Assemble & bolt the cage into position

GBP 1600.20

1

Mini R56 Bolt In Multipoint Competition Roll Cage (Design Options: JPC5 - JPC4 with X roof)

🔧 Mini R56 Bolt-In Multipoint Roll Cage – MSUK-Approved for Competition! Take your Mini R56 to full competition spec with our MSUK-compliant bolt-in multipoint roll cage. This cage is engineered for track, rally, sprint, and hill climb events, delivering exceptional chassis rigidity, maximum driver protection, and competition-level durability. ✔ MSUK-Approved – Compliant for all Motorsport UK events ✔ Competition-Grade Safety – Designed for track, rally, and hill climbs ✔ Customisable Configurations – Available in six different designs ✔ Bolt-In Convenience – Secure fitment with MSUK-approved mounting plates ✔ Powder-Coated Finish – Choose from a range of colours ✔ Professional Fitting Available – Contact us for expert installation 💡 Need a weld-in alternative? Check out our Mini R56 Weld-In Roll Cage for permanent chassis reinforcement. 🔹 Choose Your Roll Cage Specification We offer six competition-ready configurations, allowing you to choose the best balance of protection, weight, and reinforcement for your build. 📌 JPC1.5 – Lightweight & Essential Protection ✔ Single Door Bars – Strengthens side impact zones ✔ Diagonal Rear Brace – Reinforces chassis rigidity ✔ Harness Bar – Secure mounting point for race harnesses 📌 JPC2 – Increased Chassis Strength ✔ Single Door Bars – Offers essential side protection ✔ X-Rear Brace – Improves rear-end stability ✔ Harness Bars – Provides a compliant harness mounting point 📌 JPC3 – Double Door Bar Safety ✔ Double Door Bars – Increased side-impact protection ✔ X-Rear Brace – Reinforces rear chassis rigidity ✔ Harness Bars – Ensures secure harness positioning 📌 JPC4 – Maximum Competition-Level Rigidity ✔ Double Door Bars & X-Rear Brace – Ultimate chassis reinforcement ✔ Harness Bars – Motorsport-compliant mounting points ✔ A-Pillar Supports – Strengthens front impact zones 📌 JPC4.5 – Enhanced Roof & Side Bracing ✔ Double Door Bars & X-Rear Brace – Maximum driver safety ✔ Harness Bars & A-Pillar Supports – Front-end reinforcement ✔ Diagonal Roof Brace – Additional roll-over protection 📌 JPC5 – Full FIA-Level Reinforcement ✔ Double Door Bars & X-Rear Brace – Ultimate crash safety ✔ Harness Bars & A-Pillar Supports – Additional front chassis support ✔ X-Roof Bracing – The strongest roll cage design for extreme motorsport conditions 💡 Not sure which configuration suits your build? Contact us for advice or check out our Roll Cage Specification Guide. 🔹 Built for Performance – Engineered for Safety Our Mini R56 Bolt-In Multipoint Roll Cage is precision-engineered for maximum strength and compliance, providing chassis reinforcement while protecting the driver in high-performance conditions. ✔ Fully MSUK Compliant – Approved for competitive racing ✔ CNC-Bent & Notched Tubing – Ensures a precise and tight fit ✔ High-Strength Steel – Designed for safety and longevity ✔ MSUK-Spec Mounting Plates Included – Welded into place for a secure installation 💡 For full compliance details, refer to the MSUK Blue Book Regulations on roll cage requirements. 🔹 Installation & Fitment Guide This bolt-in multipoint roll cage is designed for easy installation, requiring MSUK-compliant mounting plates to be welded into place before bolting in the cage. 🔧 Installation Overview: 1️⃣ Prepare the interior – Remove seats & trim to access the mounting areas 2️⃣ Weld the MSUK-spec mounting plates into place 3️⃣ Assemble & bolt the cage into position

GBP 1512.00

1

Mini R56 Bolt In Multipoint Competition Roll Cage (Design Options: JPC3 - X rear, Double doorbars and centre brace)

🔧 Mini R56 Bolt-In Multipoint Roll Cage – MSUK-Approved for Competition! Take your Mini R56 to full competition spec with our MSUK-compliant bolt-in multipoint roll cage. This cage is engineered for track, rally, sprint, and hill climb events, delivering exceptional chassis rigidity, maximum driver protection, and competition-level durability. ✔ MSUK-Approved – Compliant for all Motorsport UK events ✔ Competition-Grade Safety – Designed for track, rally, and hill climbs ✔ Customisable Configurations – Available in six different designs ✔ Bolt-In Convenience – Secure fitment with MSUK-approved mounting plates ✔ Powder-Coated Finish – Choose from a range of colours ✔ Professional Fitting Available – Contact us for expert installation 💡 Need a weld-in alternative? Check out our Mini R56 Weld-In Roll Cage for permanent chassis reinforcement. 🔹 Choose Your Roll Cage Specification We offer six competition-ready configurations, allowing you to choose the best balance of protection, weight, and reinforcement for your build. 📌 JPC1.5 – Lightweight & Essential Protection ✔ Single Door Bars – Strengthens side impact zones ✔ Diagonal Rear Brace – Reinforces chassis rigidity ✔ Harness Bar – Secure mounting point for race harnesses 📌 JPC2 – Increased Chassis Strength ✔ Single Door Bars – Offers essential side protection ✔ X-Rear Brace – Improves rear-end stability ✔ Harness Bars – Provides a compliant harness mounting point 📌 JPC3 – Double Door Bar Safety ✔ Double Door Bars – Increased side-impact protection ✔ X-Rear Brace – Reinforces rear chassis rigidity ✔ Harness Bars – Ensures secure harness positioning 📌 JPC4 – Maximum Competition-Level Rigidity ✔ Double Door Bars & X-Rear Brace – Ultimate chassis reinforcement ✔ Harness Bars – Motorsport-compliant mounting points ✔ A-Pillar Supports – Strengthens front impact zones 📌 JPC4.5 – Enhanced Roof & Side Bracing ✔ Double Door Bars & X-Rear Brace – Maximum driver safety ✔ Harness Bars & A-Pillar Supports – Front-end reinforcement ✔ Diagonal Roof Brace – Additional roll-over protection 📌 JPC5 – Full FIA-Level Reinforcement ✔ Double Door Bars & X-Rear Brace – Ultimate crash safety ✔ Harness Bars & A-Pillar Supports – Additional front chassis support ✔ X-Roof Bracing – The strongest roll cage design for extreme motorsport conditions 💡 Not sure which configuration suits your build? Contact us for advice or check out our Roll Cage Specification Guide. 🔹 Built for Performance – Engineered for Safety Our Mini R56 Bolt-In Multipoint Roll Cage is precision-engineered for maximum strength and compliance, providing chassis reinforcement while protecting the driver in high-performance conditions. ✔ Fully MSUK Compliant – Approved for competitive racing ✔ CNC-Bent & Notched Tubing – Ensures a precise and tight fit ✔ High-Strength Steel – Designed for safety and longevity ✔ MSUK-Spec Mounting Plates Included – Welded into place for a secure installation 💡 For full compliance details, refer to the MSUK Blue Book Regulations on roll cage requirements. 🔹 Installation & Fitment Guide This bolt-in multipoint roll cage is designed for easy installation, requiring MSUK-compliant mounting plates to be welded into place before bolting in the cage. 🔧 Installation Overview: 1️⃣ Prepare the interior – Remove seats & trim to access the mounting areas 2️⃣ Weld the MSUK-spec mounting plates into place 3️⃣ Assemble & bolt the cage into position

GBP 1197.00

1

Awardvindende Google Marketing Powerhouse

Brand

Merchant

Price (EUR)

Lambo Countach Reproduction Chassis (Material: Lightweight Performance, 50% Deposit: No)

Lambo Countach Reproduction Chassis (Material: Standard, 50% Deposit: Yes)

Lambo Countach Reproduction Chassis (Material: Lightweight Performance, 50% Deposit: Yes)

Lambo Countach Reproduction Chassis (Material: Standard, 50% Deposit: No)

Classic Mini Weld-In Roll Cage Kit – Motorsport-Ready Safety (Material: Standard CDS, Design Options: JPC1.5 (single diagonal, harness bar and single

Classic Mini Weld-In Roll Cage Kit – Motorsport-Ready Safety (Material: LIGHTWEIGHT BS4-T45 - Unapproved for competition, Design Options: JPC1.5 (sing

Classic Mini Weld-In Roll Cage Kit – Motorsport-Ready Safety (Material: LIGHTWEIGHT BS4-T45 - Unapproved for competition, Design Options: JPC4 - X REA

Classic Mini Weld-In Roll Cage Kit – Motorsport-Ready Safety (Material: Standard CDS, Design Options: JPC3 - X rear, Double doorbars and centre brace)

Classic Mini Weld-In Roll Cage Kit – Motorsport-Ready Safety (Material: LIGHTWEIGHT BS4-T45 - Unapproved for competition, Design Options: JPC2 - Singl

Classic Mini Weld-In Roll Cage Kit – Motorsport-Ready Safety (Material: Standard CDS, Design Options: JPC2 - Single Doorbars, X Rear)

Classic Mini Weld-In Roll Cage Kit – Motorsport-Ready Safety (Material: Standard CDS, Design Options: JPC4 - X REAR, DOUBLE DOORBARS, A PILLAR SUPPORT

Classic Mini Weld-In Roll Cage Kit – Motorsport-Ready Safety (Material: LIGHTWEIGHT BS4-T45 - Unapproved for competition, Design Options: JPC3 - X rea

Mini R56 Bolt In Multipoint Competition Roll Cage (Design Options: JPC2 - Single Doorbars, X Rear)

Mini R56 Bolt In Multipoint Competition Roll Cage (Colour: Specific Metallic RAL, Design Options: JPC3 - X rear, Double doorbars and centre brace)

Mini R56 Bolt In Multipoint Competition Roll Cage (Colour: Specific Metallic RAL, Design Options: JPC5 - JPC4 with X roof)

Mini R56 Bolt In Multipoint Competition Roll Cage (Design Options: JPC1.5 (single diagonal, harness bar and single doorbars))

Mini R56 Bolt In Multipoint Competition Roll Cage (Colour: Unpainted, Design Options: JPC4 - With A Pillar Supports)

Mini R56 Bolt In Multipoint Competition Roll Cage (Colour: Unpainted, Design Options: JPC2 - Single Doorbars, X Rear)

Mini R56 Bolt In Multipoint Competition Roll Cage (Design Options: JPC4.5 - JPC4 with Diagonal roof)

Mini R56 Bolt In Multipoint Competition Roll Cage (Design Options: JPC2 - Single Doorbars, X Rear)

Mini R56 Bolt In Multipoint Competition Roll Cage (Colour: Unpainted, Design Options: JPC1.5 (single diagonal, harness bar and single doorbars))

Mini R56 Bolt In Multipoint Competition Roll Cage (Design Options: JPC4 - With A Pillar Supports)

Mini R56 Bolt In Multipoint Competition Roll Cage (Design Options: JPC4.5 - JPC4 with Diagonal roof)

Mini R56 Bolt In Multipoint Competition Roll Cage (Design Options: JPC5 - JPC4 with X roof)

Mini R56 Bolt In Multipoint Competition Roll Cage (Design Options: JPC3 - X rear, Double doorbars and centre brace)

Powered by Cobiro