67 results (0,21680 seconds)

Brand

Colour

Merchant

Price (EUR)

Reset filter

Products
From
Shops

StarTech.com USB Dual Hard Drive Docking Station Uasp

StarTech.com USB Dual Hard Drive Docking Station Uasp

The SDOCK2U33 Dual 2.5/3.5" SATA hard drive docking station lets you dock and swap drives from your desktop or laptop computer simultaneously, using a single USB port.Enhanced with UASP , this hard drive docking station lets you get the most out of the fastest drive technologies such as SATA III , solid state drives and hybrid, drives with performance up to 70% faster than conventional USB 3.0 when paired with a UASP-enabled host controller. See our UASP testing results below for further details.The hard drive dock features independent power buttons for each individual drive, ensuring you can operate each hard drive separately. This gives you the freedom to hot-swap one drive while transferring data to another, saving you time.Extend the value of this hard drive docking station further with the addition of our SATA to IDE Hard Drive Adapter , allowing easy insertion of any 2.5 or 3.5in. IDE hard drive into a SATA hard drive dock.To ensure compatibility with your computer system, the SDOCK2U33 supports all of the leading operating systems, including: Microsoft Windows , Apple OSX , Linux, and Google Chrome OS.SDOCK2U33 is backed by a StarTech.com 2-year warranty and free lifetime technical support.Improved Performance with UASPUASP is supported in Windows 8, Mac OSX , and Linux. In testing, UASP performs with a 70% faster read speed and 40% faster write speed over traditional USB 3.0 at peak performance.At the same peak in testing UASP also shows an 80% reduction in required processor resources.Testing results were obtained using an Intel Ivy Bridge system, a UASP-enabled StarTech.com Enclosure, and a SATA III solid state drive.

GBP 84.99
1

StarTech.com Thunderbolt 3 to Dual DP Adapter 4K 8K

StarTech.com 2 Port 10Gbps USB-A and USB-C PCIe Card

StarTech.com 2 Port 10Gbps USB-A and USB-C PCIe Card

This USB 3.1 Gen 2 card lets you add one USB-C port and one USB-A port to your computer, through a PCI Express slot. It enables you to upgrade your current system by adding two USB 3.1 Gen 2 ports to your computer and giving you access to data transfer speeds up to 10Gbps per port. USB 3.1 Gen 2 (also known as USB 3.2 Gen 2x1) PCIe Add-On card supports Multiple INs, maintains optimal bandwidth even when mixed speed devices are connected.Plus, by adding one USB-C and one USB-A port to your PC, you can easily connect legacy, modern, and future USB devices, regardless of the USB connector type.USB 3.1 Gen 2 PerformanceBy adding 10Gbps USB ports to your computer, you can harness the speed of USB 3.1 Gen 2 and rest assured you're ready for both current and future high-bandwidth USB-A and USB-C devices.With higher data throughput support, this USB 3.1 PCIe card is a necessity for external drives, drive enclosures, and many other USB 3.1 peripherals. Plus, the expansion card with SATA power enables supplemental power to the USB ports (when motherboard power is insufficient) providing up to 5V 3A/15W via the USB-C port and 5V 0.9A/4.5W via the USB-A port. The card is ideal for use with high performance external storage solutions.Compatible with Older USB DevicesConnecting older peripherals isn't a problem. This versatile dual-port USB 3.1 card is backward compatible with legacy USB 3.0/2.0 devices that use the common USB Type-A port, so you can eliminate the added expense and aggravation of purchasing new devices. You can also connect older devices on the USB Type-C port using a variety of USB-C cables and adapters.Easy InstallationThe USB 3.1 card is compatible with a broad range of Windows, macOS and Linux operating systems. Plus, the high-quality card includes both standard-profile and low-profile brackets, making it easy to install in full or small form-factor PCs and servers.Faster Transfer Speeds with UASPThe card supports USB data transfer speeds of 10Gbps. But, you can experience transfer speeds up to 70% faster than conventional USB, when connected to a computer that also supports UASP. With UASP you can utilize the full potential of a SATA III SSD or HDD. UASP is supported in Windows 8, macOS (10.8 or above), and Linux.In testing, UASP performs with a 70% faster read speed and 40% faster write speed over traditional USB 3.1 Gen 2 at peak performance.At the same peak in testing, UASP also shows an 80% reduction in required processor resources.The PEXUSB311AC3 is backed by a StarTech.com 2-year warranty and free lifetime technical support.

GBP 49.99
1

StarTech.com 2m Cisco Compatible Sfp+ 10GbE Cable

StarTech.com 1m Cisco Compatible Sfp+ 10 10GbE Cable

StarTech.com PCIe Card 2PT USB 3.1 10Gbps Plus eSATA

StarTech.com USB3.1 Enclosure for 2.5in SATA Drives

StarTech.com 2m Cisco Comp SFPPlus 10GbE Twinax Cable

StarTech.com MSA 10Gb SFP Plus Direct Attach Cable

StarTech.com 5m MSA 10Gb SFP Plus Direct Attach Cable

StarTech.com 2.5m Cisco Comp SFPPlus Direct Attach

StarTech.com 12m White CAT8 LSZH Ethernet Cable

StarTech.com 12m White CAT8 LSZH Ethernet Cable

Connect to a 25/40Gbps switch or networking device using this Snagless S/FTP Category 8 Ethernet Cable. The 2000MHz maximum frequency enables up to four times higher throughput than Cat6a.Pure Bare Copper WireOur Snagless Cat8 Cables are designed for long-lasting performance. The 4-Pair Shielded and Foiled Twisted Pair (S/FTP) construction utilizes 26AWG pure bare copper wire for improved conductivity and low resistance, ensuring reliable transmission and minimal signal loss.Pure bare copper wiring offers consistent performance characteristics across different environments. Each pair is shielded in aluminium-mylar foil and tinned copper braid for enhanced EMI protection.Durable ConstructionThe Cat8 Ethernet Cable features snagless 50-micro gold-plated connectors that enable a precise fit to minimize wear and are rated beyond 750 connector mating cycles. The flexible Low Smoke Zero Halogen (LSZH) flame-retardant jacket emits low smoke and toxic fumes when exposed to extreme heat or in the event of a fire. This enables safer installations in poorly-ventilated areas including some industrial settings, self-contained environments such as trains and aircraft, as well as residential settings where compliance with building codes must be considered.The cable is rated to withstand -/+90-degree bends and routes well in confined spaces.Versatile DependabilityThe Shielded Cat8 Patch Cord is ideal for high-density 25/40GBASE-T networks and supports up to 100W output to Power over Ethernet (PoE++) devices. Establish connectivity to 25G/40G switches, Network Attached Storage (NAS), Storage Area Networks (SANs), and SFP modules. It facilitates reliable throughput and power to low-latency and critical PoE devices, including PoE switches, access points, and IP cameras.Backward compatibility with Cat 6/6a and Cat 5/5e standards ensure seamless integration into existing network environments. Our Snagless Cat8 cables are Fluke channel tested for guaranteed Cat8 performance.

GBP 71.99
1

StarTech.com StarTech Gigabit Fiber SFP Transceiver Module

StarTech.com Ac dc Power Adapter Supply for USB Hubs

StarTech.com Single Bay USB 3.1/eSATA to SATA Hard Drive Docking Station

StarTech.com Startech 4 Port PCIE Low Profile USB 2.0 Card

StarTech.com 3 Port 2b 1a LP 1394 PCIe FireWire Card

StarTech.com Cisco GLC TE Comp Module 1000BASET

StarTech.com 30m SC/SC OS2 Single Mode Fibre Cable

StarTech.com 30m SC/SC OS2 Single Mode Fibre Cable

OS2 SC to SC Single Mode Simplex Fiber Optic Patch cable facilitates connectivity across 40G/100G networks. It supports Coarse Wavelength Division Multiplexing (CWDM) across an extended wavelength range of 1260-1625nm, improving channel isolation for optimal signal strength over long distances.CompatibilityConnect to single-fibre networking devices including simplex patch panels, SFP transceivers, and fibre NICs. This 9/125m OS2 simplex single mode fibre patch cord is backward compatible with OS1 networks, ensuring a reliable connection in legacy fibre environments.Engineered for Optimal PerformancePrecision-manufactured ceramic ferrules ensure accurate fibre alignment for an insertion loss below 0.3dB. Ultra Physical Contact (UPC)-polished SC to SC fibre ends greatly improve return loss characteristics over older PC polishing techniques. The Bend Insensitive fibre core is surrounded by a layer of low refractive index material. This material reduces the amount of light that can escape the fibre cable by reflecting the light back into the fibre. The OS2 fibre patch cord is engineered for low attenuation and performance that exceeds ITU-T G652.D/G657.A1 and IEC60703-2-50 type B1.3/B6.a1 industry standards.LSZH Cable JacketHoused in a Low-Smoke Zero-Halogen (LSZH) flame-retardant jacket, the OS2 fibre cable emits low smoke and toxic fumes when exposed to extreme heat or in the event of a fire. This enables safer cable installations in areas with poor ventilation including some industrial settings, self-contained environments such as trains and aircraft, as well as residential settings where compliance with building codes must be considered.Each OS2 fibre cable is individually tested for insertion loss performance and includes a test report, for guaranteed compatibility and 100% reliability.

GBP 69.99
1

StarTech.com 20m LC to LC OS2 Single Mode Duplex Fibre Optic Cable

StarTech.com 20m LC to LC OS2 Single Mode Duplex Fibre Optic Cable

OS2 LC to LC Single Mode Duplex Fiber Optic Patch cable facilitates connectivity across 100G networks. It supports Coarse Wavelength Division Multiplexing (CWDM) across an extended wavelength range of 1260-1625nm, improving channel isolation for optimal signal strength over long distances.CompatibilityThis 9/125m Single Mode fibre cable supports 1260-1625nm laser-optimized sources and is ideal for critical connections between servers, switches, and data centre equipment. It is backward compatible with OS1 networks, ensuring a reliable connection in legacy fibre environments.Engineered for Optimal PerformancePrecision-manufactured ceramic ferrules ensure accurate fibre alignment for an insertion loss below 0.3dB. Ultra Physical Contact (UPC) -polished LC to LC fibre ends greatly improve return loss characteristics over older PC polishing techniques. The Bend Insensitive fibre core is surrounded by a layer of low refractive index material. This material reduces the amount of light that can escape the fibre cable by reflecting the light back into the fibre. The OS2 fibre patch cord is engineered for low attenuation and performance that exceeds ITU-T G652.D/G657.A1 and IEC60703-2-50 type B1.3/B6.a1 industry standards.LSZH Cable JacketHoused in a Low-Smoke Zero-Halogen (LSZH) flame-retardant jacket, the OS2 fibre cable emits low smoke and toxic fumes when exposed to extreme heat or in the event of a fire. This enables safer cable installations in areas with poor ventilation including some industrial settings, self-contained environments such as trains and aircraft, as well as residential settings where compliance with building codes must be considered.Each OS2 fibre cable is individually tested for insertion loss performance and includes a test report, for guaranteed compatibility and 100% reliability.

GBP 43.99
1

StarTech.com Cisco Glc-t Compatible GB SFP 1000BASE-T

StarTech.com TV Wall Mount Fixed For 60 to 100in TVs

StarTech.com TV Wall Mount Fixed For 60 to 100in TVs

TV Wall Mount Fixed For 60 to 100in TVs This heavy-duty TV wall mount is ideal for commercial and business purposes such as digital signage in lobbies, displays for boardrooms or anywhere a large professional display needs to be mounted. Engineered for Heavy Duty Commercial Grade TVsThis TV wall mount is designed to be used with commercial or heavy-duty televisions and displays. It supports a weight of up to 165 lbs. or 75 kilograms and has been thoroughly tested to triple the rated weight capacity to ensure premium product quality and reliable performance. The mount is ideal for 60" to 100" TVs including curved TVs; however, most larger or smaller TVs can be accommodated if they fall within the listed weight capacity. Straightforward Installation & RemovalThis TV mount is VESA compatible and has two rows of seventeen mounting holes across the wall bracket to accommodate a variety of spacing between studs and helping you to centre your display. The included bubble level helps to ensure an accurate mount to the wall. Once the wall bracket is attached to the wall and the vertical brackets are attached to the TV, the TV simply attaches to the mount using the spring locks and can be as easily removed using the release pull straps. Comprehensive Product Testing & Expert Technical Support StarTech. com conducts thorough compatibility and performance testing on all our products to ensure we are meeting or exceeding industry standards and providing high-quality products to our customers. Our local StarTech. com Technical Advisors have broad product expertise and work directly with StarTech. com Engineers to provide support for our customers both pre and post-sales. FPWFXB1 is backed by a StarTech. com 5-year warranty and free lifetime technical support.

GBP 81.99
1

StarTech.com StarTech 10m USB 2.0 Active Extension Cable