96 results (0,19380 seconds)

Show all filters

Brand

Show all

Merchant

Price (EUR)

Reset filter

Products
From
Shops

Tapco Composite Slate Roof Tile - 305mm x 445mm Grey

Tapco Composite Slate Roof Tile - 305mm x 445mm Grey

TapcoSlate Classic roofing is a ultimate solution to tile roofing on domestic and commercial properties. Each individual tile features pre-marked screw andamp; fixings guides as well as horizontal spacers (5mm each side, making 305mm overall) on each side of the tile to inform the installer how close the tiles should be placed next to each other. These features make the installation process even easier and faster.If needed, these tiles, as well as the ridges can be cut with a fine-toothed handsaw or a jigsaw. A fully installed composite roofing system is impermeable; it is BBA approved, has a BROOF(t4) designation, EN15601 wind rated (at 12 and 14 degrees) and has a Class IV hail rating, making it a great alternative to traditional slate, while being easier to handle and install.Click here to view our full installation guide for composite slate roofing tiles.Roof PitchGaugeTiles Per Square Metre12 to 25 degreesandnbsp;152mm2225 to 27.5 degrees165mm2027.5 to 30 degrees178mm1930 to 70 degrees191mm18andnbsp;

GBP 3.46
1

White Fascia Capping Board Double End Joint - 500mm x 42mm

White Fascia Capping Board Double End Joint - 500mm x 42mm

Fascia joint covers are used to hide the 10mm expansion gap that should be left between two boards.To enable the system to expand and contract correctly in a different range of temperatures, one side of any joint or corner on any PVC fascia installation should be glued to the board and the other side should be sealed with low modulus silicon, which allows movement within the joint.Double ended joints can be cut to size with a standard hacksaw or fine toothed saw.

GBP 2.16
1

White Fascia Capping Board Joint - 300mm

White Fascia Capping Board Joint - 300mm

Fascia joint covers are used to hide the 10mm expansion gap that should be left between two boards.To enable the system to expand and contract correctly in a different range of temperatures, one side of any joint or corner on any PVC fascia installation should be glued to the board and the other side should be sealed with low modulus silicon, which allows movement within the joint.Joints can be cut to size with a standard hacksaw or fine toothed saw.

GBP 2.59
1

Weatherboard Cladding Butt Joint - Sand

Weatherboard Cladding Butt Joint - Sand

The Weatherboard Cladding Butt Joint Trim is to be used to join boards together and when used breaks up the line a little bit on larger installations covering the joint in a staggered effect.The butt joint is usually used as an alternative to a centre joint trim which produces a straight line joint.The Butt joint is available across the Weatherboard Cladding range including White, Colonial Blue, Storm Grey, Slate Grey, Sage Green and Sand and is to be used in conjunction the 170mm Weatherboard panel.

GBP 3.56
1

Ogee Fascia Corner - 300mm White

Ogee Fascia Corner - 300mm White

Corner trims are used to hide the 10mm expansion gap that should be left between two boards at the corner of the eaves.To enable the system to expand and contract correctly in a different range of temperatures, one side of any joint or corner on any PVC fascia installation should be glued to the board and the other side should be sealed with low modulus silicon, which allows movement within the joint. Fascia corners can be cut to size with a standard hacksaw or fine toothed saw.

GBP 3.98
1

Weatherboard Cladding Butt Joint - Storm Grey

Weatherboard Cladding Butt Joint - Storm Grey

The Weatherboard Cladding Butt Joint Trim is to be used to join boards together and when used breaks up the line a little bit on larger installations covering the joint in a staggered effect.The butt joint is usually used as an alternative to a centre joint trim which produces a straight line joint.The Butt joint is available across the Weatherboard Cladding range including White, Colonial Blue, Storm Grey, Slate Grey, Sage Green and Sand and is to be used in conjunction the 170mm Weatherboard panel.

GBP 3.56
1

Weatherboard Cladding Butt Joint - White

Weatherboard Cladding Butt Joint - White

The Weatherboard Cladding Butt Joint Trim is to be used to join boards together and when used breaks up the line a little bit on larger installations covering the joint in a staggered effect.The butt joint is usually used as an alternative to a centre joint trim which produces a straight line joint.The Butt joint is available across the Weatherboard Cladding range including White, Colonial Blue, Storm Grey, Slate Grey, Sage Green and Sand and is to be used in conjunction the 170mm Weatherboard panel.

GBP 3.56
1

Weatherboard Cladding Butt Joint - Colonial Blue

Weatherboard Cladding Butt Joint - Colonial Blue

The Weatherboard Cladding Butt Joint Trim is to be used to join boards together and when used breaks up the line a little bit on larger installations covering the joint in a staggered effect.The butt joint is usually used as an alternative to a centre joint trim which produces a straight line joint.The Butt joint is available across the Weatherboard Cladding range including White, Colonial Blue, Storm Grey, Slate Grey, Sage Green and Sand and is to be used in conjunction the 170mm Weatherboard panel.

GBP 3.56
1

White Fascia Capping Board Double End Corner - 500mm x 42mm

White Fascia Capping Board Double End Corner - 500mm x 42mm

Corner trims are used to hide the 10mm expansion gap that should be left between two boards at the corner of the eaves.To enable the system to expand and contract correctly in a different range of temperatures, one side of any joint or corner on any PVC fascia installation should be glued to the board and the other side should be sealed with low modulus silicon, which allows movement within the joint.Double ended corners can be cut to size with a standard hacksaw or fine toothed saw.

GBP 2.37
1

White Fascia Capping Board External Corner - 300mm

White Fascia Capping Board External Corner - 300mm

Corner trims are used to hide the 10mm expansion gap that should be left between two boards at the corner of the eaves.To enable the system to expand and contract correctly in a different range of temperatures, one side of any joint or corner on any PVC fascia installation should be glued to the board and the other side should be sealed with low modulus silicon, which allows movement within the joint.Double ended corners can be cut to size with a standard hacksaw or fine toothed saw.

GBP 2.66
1

Fascia Double End Joint Trim - 500mm x 35mm White

Fascia Double End Joint Trim - 500mm x 35mm White

Joint covers are used to hide the 10mm expansion gap that should be left between two fascia boards.To enable the system to expand and contract correctly in a different range of temperatures, one side of any joint or corner on any PVC fascia installation should be glued to the board and the other side should be sealed with low modulus silicon, which allows movement within the joint.ÂÂandnbsp;Double ended joints can be cut to size with a standard hacksaw or fine toothed saw.

GBP 2.59
1