26 results (0,59326 seconds)

Show all filters

Brand

Merchant

Price (EUR)

Reset filter

Products
From
Shops

3M Cubitron II Fibre Disc 987C, 125mm x 22mm, 60+, Slotted (Pack of 25)

3M Cubitron II Fibre Disc 987C, 125mm x 22mm, 60+, Slotted (Pack of 25)

3M™ Fibre Disc 501C features sharp alumina zirconia mineral on a durable fiber backing, making it ideal for weld removal and other medium pressure applications such as deburring or rust removal. Alumina zirconia offers a fast cut and consistent finish on mild steel yet can also be used with good results on stainless steel.Use 3M™ Fibre Disc 501C for weld removal and other medium pressure applications such as deburring or rust removal. Our discs feature sharp alumina zirconia mineral on a durable fibre backing for a fast cut and consistent finish on mild steel. They can also be used with good results on stainless steel. The Alumina zirconia breaks down to produce a consistently sharp edge that cuts faster than aluminium oxide and is suitable for stock removal on all metals. A stiff fibre backing provides the durability needed for weld removal and other medium pressure applications such as deburring or rust removal. The durable resin bond resists deterioration from heat, increasing disc life, and provides excellent mineral retention for edge grinding. Closed coat provides added life and cut 22.23 mm centre hole mount is compatible with 3M™ disc pad face plates and hubs, and requires the use of a disc retainer nut.

EUR 71.05
1

3M 86820 Cubitron II Hookit Film Disc 775L, 152 mm, No Hole, 80+ (Pack of 50)

3M 86820 Cubitron II Hookit Film Disc 775L, 152 mm, No Hole, 80+ (Pack of 50)

Use 3M Cubitron II Hookit Film Disc 775L for a cut that’s up to twice as fast and a disc which lasts up to six times as long as normal abrasives. Our discs have a film backing which offers better tear resistance and edge retention than paper discs. These film discs feature 3M Precision Shaped Grain which forms into triangular points that slice through metal rather than gouging or ploughing like traditional abrasives. These points continuously self-sharpen as they fracture, generating an extremely fast cut. 3M offer a complete line of hook and loop style Hookit discs for work spaces where adhesive backed discs may become contaminated by dust or dirt. Hookit discs tend to leave finer finishes than adhesive backed discs, so are often used in applications where a 3M Stikit disc may be too aggressive. Hookit sanding discs conveniently attach to a hook-and-loop backup disc pad (sold separately). They are removed easily and can be reused for the entire life of the abrasive. For best results pair with 3M Elite Random Orbital Sanders.

EUR 53.66
1

3M Cubitron II Fibre Disc 982C, 125 mm x 22 mm, 36+, Slotted (Pack of 25)

3M Cubitron II Fibre Disc 982C, 125 mm x 22 mm, 36+, Slotted (Pack of 25)

3M™ Cubitron™ II Fibre Disc 982C slices through carbon steel with 3M Precision Shaped Grain and generates up to twice the cut-rate, durability, and life of other fiber discs—all with less grinding pressure. That means less operator fatigue, faster throughput, and more parts per disc when tackling high pressure grinding applications such as medium to heavy-duty stock removal.Use our heavy duty 3M™ Cubitron™ II Fibre Disc 982C for a variety of applications including edge chamfering, bevelling and removing carbon steel welds, mill scale, pits and imperfections, machining grooves and more. Our discs raise the bar for high performing abrasives, offering up to double the cut rate and lifespan than conventional ceramic industrial abrasive discs, with less grinding pressure required. Use for grinding and blending large and small areas of metal surfaces. In heavy duty applications, more parts per disc are completed, reducing the need for disc changes. Our discs feature 3M Precision Shaped Grain technology, which generates triangular shaped grains, electrostatically positioned on the backing. These turn into sharp peaks that act like individual cutting tools, slicing through metal with extreme efficiency. The grains wear evenly and continuously self-sharpen as the points break off. This reduces heat due to friction and extends the lifespan of the disc. The tough, stiff backing is made from a vulcanized fibre that resists wear and can handle tough grinding applications. Our discs are designed to maximise cutting potential, minimising grinding pressure and operator fatigue.

EUR 89.10
1

3M Cubitron II Fibre Disc 982C, 115 mm x 22 mm, 60+, Slotted (Pack of 25)

3M Cubitron II Fibre Disc 982C, 115 mm x 22 mm, 60+, Slotted (Pack of 25)

3M™ Cubitron™ II Fibre Disc 982C slices through carbon steel with 3M Precision Shaped Grain and generates up to twice the cut-rate, durability, and life of other fiber discs—all with less grinding pressure. That means less operator fatigue, faster throughput, and more parts per disc when tackling high pressure grinding applications such as medium to heavy-duty stock removal.Use our heavy duty 3M™ Cubitron™ II Fibre Disc 982C for a variety of applications including edge chamfering, bevelling and removing carbon steel welds, mill scale, pits and imperfections, machining grooves and more. Our discs raise the bar for high performing abrasives, offering up to double the cut rate and lifespan than conventional ceramic industrial abrasive discs, with less grinding pressure required. Use for grinding and blending large and small areas of metal surfaces. In heavy duty applications, more parts per disc are completed, reducing the need for disc changes. Our discs feature 3M Precision Shaped Grain technology, which generates triangular shaped grains, electrostatically positioned on the backing. These turn into sharp peaks that act like individual cutting tools, slicing through metal with extreme efficiency. The grains wear evenly and continuously self-sharpen as the points break off. This reduces heat due to friction and extends the lifespan of the disc. The tough, stiff backing is made from a vulcanized fibre that resists wear and can handle tough grinding applications. Our discs are designed to maximise cutting potential, minimising grinding pressure and operator fatigue.

EUR 60.18
1

3M Cubitron II Hookit Clean Sanding Film Disc 775L, 152 mm, Clean Sand, 240+ (Pack of 50)

3M Cubitron II Hookit Clean Sanding Film Disc 775L, 152 mm, Clean Sand, 240+ (Pack of 50)

3M™ Cubitron™ II Hookit™ Clean Sanding Film Disc 775L cuts up to two times faster and lasts up to six times longer than conventional abrasives. Our film discs are ideal for a broad range of applications focused primarily on stock removal and are effective on a wide variety of substrates.Use 3M™ Cubitron™ II Hookit™ Clean Sanding Film Disc 775L for better tear resistance than paper discs. Our discs cut up to two times faster and last up to six times longer than conventional abrasives. The multi-hole pattern on our Clean Sanding products evacuates dust at a higher rate than 5 or 6 hole products. Sandpaper discs cut better and last longer when dust isn’t loading the cutting surface of the abrasives. This design doesn’t require alignment of holes with the disc pad making disc changes fast and simple. An open coat construction means the abrasive grains have space between them to help evacuate dust and other sanding debris. This helps avoid clogging the cutting edge of the grains. The load resistant coating allows the disc to continue cutting even when sanding softwoods, paints and other materials that would usually clog the disc, leading to reduced sanding ability. Our film discs feature 3M Precision Shaped Grain which forms into triangular points that slice through metal rather than gouging or ploughing like traditional abrasives. These points continuously self-sharpen as they fracture, generating an extremely fast cut. 3M offers a complete line of hook and loop style Hookit discs for work spaces where adhesive backed discs may become contaminated by dust or dirt. Hookit discs tend to leave finer finishes than adhesive backed discs, so are often used in applications where a 3M™ Stikit™ disc may be too aggressive. Our discs are ideal for a range of applications focused on stock removal and are effective on a wide variety of substrates – including metals, composites, gelcoat and whitewood. Hookit sanding discs conveniently attach to a hook-and-loop backup disc pad (sold separately). They can be easily removed and can be reused for the entire life of the abrasive. For maximum dust extraction use with 3M Elite Random Orbital Sanders and 3M Hookit Clean Sanding pads (both sold separately).

EUR 57.42
1

3M Cubitron II Hookit Clean Sanding Film Disc 775L, 127 mm , Clean Sand, 150+ (Pack of 50)

3M Cubitron II Hookit Clean Sanding Film Disc 775L, 127 mm , Clean Sand, 150+ (Pack of 50)

This 3M™ precision shaped abrasive grain disc is an aluminum oxide, open coat, Hookit™ disc with precise multiple hole design for improved dust extraction. Constructed on a film backing. Primary markets: metalworking, woodworking.Use 3M™ Cubitron™ II Hookit™ Clean Sanding Film Disc 775L for better tear resistance than paper discs. Our discs cut up to two times faster and last up to six times longer than conventional abrasives. The multi-hole pattern on our Clean Sanding products evacuates dust at a higher rate than 5 or 6 hole products. Sandpaper discs cut better and last longer when dust isn’t loading the cutting surface of the abrasives. This design doesn’t require alignment of holes with the disc pad making disc changes fast and simple. An open coat construction means the abrasive grains have space between them to help evacuate dust and other sanding debris. This helps avoid clogging the cutting edge of the grains. The load resistant coating allows the disc to continue cutting even when sanding softwoods, paints and other materials that would usually clog the disc, leading to reduced sanding ability. Our film discs feature 3M Precision Shaped Grain which forms into triangular points that slice through metal rather than gouging or ploughing like traditional abrasives. These points continuously self-sharpen as they fracture, generating an extremely fast cut. 3M offers a complete line of hook and loop style Hookit discs for work spaces where adhesive backed discs may become contaminated by dust or dirt. Hookit discs tend to leave finer finishes than adhesive backed discs, so are often used in applications where a 3M™ Stikit™ disc may be too aggressive. Our discs are ideal for a range of applications focused on stock removal and are effective on a wide variety of substrates – including metals, composites, gelcoat and whitewood. Hookit sanding discs conveniently attach to a hook-and-loop backup disc pad (sold separately). They can be easily removed and can be reused for the entire life of the abrasive. For maximum dust extraction use with 3M Elite Random Orbital Sanders and 3M Hookit Clean Sanding pads (both sold separately).

EUR 43.56
1

3M Cubitron II Hookit Clean Sanding Film Disc 775L, 152 mm, Clean Sand, 400+ (Pack of 50)

3M Cubitron II Hookit Clean Sanding Film Disc 775L, 152 mm, Clean Sand, 400+ (Pack of 50)

3M™ Cubitron™ II Hookit™ Clean Sanding Film Disc 775L cuts up to two times faster and lasts up to six times longer than conventional abrasives. Our film discs are ideal for a broad range of applications focused primarily on stock removal and are effective on a wide variety of substrates.Use 3M™ Cubitron™ II Hookit™ Clean Sanding Film Disc 775L for better tear resistance than paper discs. Our discs cut up to two times faster and last up to six times longer than conventional abrasives. The multi-hole pattern on our Clean Sanding products evacuates dust at a higher rate than 5 or 6 hole products. Sandpaper discs cut better and last longer when dust isn’t loading the cutting surface of the abrasives. This design doesn’t require alignment of holes with the disc pad making disc changes fast and simple. An open coat construction means the abrasive grains have space between them to help evacuate dust and other sanding debris. This helps avoid clogging the cutting edge of the grains. The load resistant coating allows the disc to continue cutting even when sanding softwoods, paints and other materials that would usually clog the disc, leading to reduced sanding ability. Our film discs feature 3M Precision Shaped Grain which forms into triangular points that slice through metal rather than gouging or ploughing like traditional abrasives. These points continuously self-sharpen as they fracture, generating an extremely fast cut. 3M offers a complete line of hook and loop style Hookit discs for work spaces where adhesive backed discs may become contaminated by dust or dirt. Hookit discs tend to leave finer finishes than adhesive backed discs, so are often used in applications where a 3M™ Stikit™ disc may be too aggressive. Our discs are ideal for a range of applications focused on stock removal and are effective on a wide variety of substrates – including metals, composites, gelcoat and whitewood. Hookit sanding discs conveniently attach to a hook-and-loop backup disc pad (sold separately). They can be easily removed and can be reused for the entire life of the abrasive. For maximum dust extraction use with 3M Elite Random Orbital Sanders and 3M Hookit Clean Sanding pads (both sold separately).

EUR 57.42
1

3M Cubitron II Hookit Clean Sanding Film Disc 775L, 127 mm, Clean Sand, 240+ (Pack of 50)

3M Cubitron II Hookit Clean Sanding Film Disc 775L, 127 mm, Clean Sand, 240+ (Pack of 50)

This 3M™ precision shaped abrasive grain disc is an aluminum oxide, open coat, Hookit™ disc with precise multiple hole design for improved dust extraction. Constructed on a film backing. Primary markets: metalworking, woodworking.Use 3M™ Cubitron™ II Hookit™ Clean Sanding Film Disc 775L for better tear resistance than paper discs. Our discs cut up to two times faster and last up to six times longer than conventional abrasives. The multi-hole pattern on our Clean Sanding products evacuates dust at a higher rate than 5 or 6 hole products. Sandpaper discs cut better and last longer when dust isn’t loading the cutting surface of the abrasives. This design doesn’t require alignment of holes with the disc pad making disc changes fast and simple. An open coat construction means the abrasive grains have space between them to help evacuate dust and other sanding debris. This helps avoid clogging the cutting edge of the grains. The load resistant coating allows the disc to continue cutting even when sanding softwoods, paints and other materials that would usually clog the disc, leading to reduced sanding ability. Our film discs feature 3M Precision Shaped Grain which forms into triangular points that slice through metal rather than gouging or ploughing like traditional abrasives. These points continuously self-sharpen as they fracture, generating an extremely fast cut. 3M offers a complete line of hook and loop style Hookit discs for work spaces where adhesive backed discs may become contaminated by dust or dirt. Hookit discs tend to leave finer finishes than adhesive backed discs, so are often used in applications where a 3M™ Stikit™ disc may be too aggressive. Our discs are ideal for a range of applications focused on stock removal and are effective on a wide variety of substrates – including metals, composites, gelcoat and whitewood. Hookit sanding discs conveniently attach to a hook-and-loop backup disc pad (sold separately). They can be easily removed and can be reused for the entire life of the abrasive. For maximum dust extraction use with 3M Elite Random Orbital Sanders and 3M Hookit Clean Sanding pads (both sold separately).

EUR 43.56
1

3M Xtract Cubitron II Hookit Clean Sanding Film Disc 775L, 127 mm, Clean Sand, 400+ (Pack of 50)

3M Xtract Cubitron II Hookit Clean Sanding Film Disc 775L, 127 mm, Clean Sand, 400+ (Pack of 50)

This 3M™ precision shaped abrasive grain disc is an aluminum oxide, open coat, Hookit™ disc with precise multiple hole design for improved dust extraction. Constructed on a film backing. Primary markets: metalworking, woodworking.Use 3M™ Cubitron™ II Hookit™ Clean Sanding Film Disc 775L for better tear resistance than paper discs. Our discs cut up to two times faster and last up to six times longer than conventional abrasives. The multi-hole pattern on our Clean Sanding products evacuates dust at a higher rate than 5 or 6 hole products. Sandpaper discs cut better and last longer when dust isn’t loading the cutting surface of the abrasives. This design doesn’t require alignment of holes with the disc pad making disc changes fast and simple. An open coat construction means the abrasive grains have space between them to help evacuate dust and other sanding debris. This helps avoid clogging the cutting edge of the grains. The load resistant coating allows the disc to continue cutting even when sanding softwoods, paints and other materials that would usually clog the disc, leading to reduced sanding ability. Our film discs feature 3M Precision Shaped Grain which forms into triangular points that slice through metal rather than gouging or ploughing like traditional abrasives. These points continuously self-sharpen as they fracture, generating an extremely fast cut. 3M offers a complete line of hook and loop style Hookit discs for work spaces where adhesive backed discs may become contaminated by dust or dirt. Hookit discs tend to leave finer finishes than adhesive backed discs, so are often used in applications where a 3M™ Stikit™ disc may be too aggressive. Our discs are ideal for a range of applications focused on stock removal and are effective on a wide variety of substrates – including metals, composites, gelcoat and whitewood. Hookit sanding discs conveniently attach to a hook-and-loop backup disc pad (sold separately). They can be easily removed and can be reused for the entire life of the abrasive. For maximum dust extraction use with 3M Elite Random Orbital Sanders and 3M Hookit Clean Sanding pads (both sold separately).

EUR 43.56
1

3M Cubitron II Hookit Clean Sanding Film Disc 775L, 127 mm, Clean Sand, 80+ (Pack of 50)

3M Cubitron II Hookit Clean Sanding Film Disc 775L, 127 mm, Clean Sand, 80+ (Pack of 50)

3M™ Cubitron™ II Hookit™ Clean Sanding Film Disc 775L cuts up to two times faster and lasts up to six times longer than conventional abrasives. Our film discs are ideal for a broad range of applications focused primarily on stock removal and are effective on a wide variety of substrates.Use 3M™ Cubitron™ II Hookit™ Clean Sanding Film Disc 775L for better tear resistance than paper discs. Our discs cut up to two times faster and last up to six times longer than conventional abrasives. The multi-hole pattern on our Clean Sanding products evacuates dust at a higher rate than 5 or 6 hole products. Sandpaper discs cut better and last longer when dust isn’t loading the cutting surface of the abrasives. This design doesn’t require alignment of holes with the disc pad making disc changes fast and simple. An open coat construction means the abrasive grains have space between them to help evacuate dust and other sanding debris. This helps avoid clogging the cutting edge of the grains. The load resistant coating allows the disc to continue cutting even when sanding softwoods, paints and other materials that would usually clog the disc, leading to reduced sanding ability. Our film discs feature 3M Precision Shaped Grain which forms into triangular points that slice through metal rather than gouging or ploughing like traditional abrasives. These points continuously self-sharpen as they fracture, generating an extremely fast cut. 3M offers a complete line of hook and loop style Hookit discs for work spaces where adhesive backed discs may become contaminated by dust or dirt. Hookit discs tend to leave finer finishes than adhesive backed discs, so are often used in applications where a 3M™ Stikit™ disc may be too aggressive. Our discs are ideal for a range of applications focused on stock removal and are effective on a wide variety of substrates – including metals, composites, gelcoat and whitewood. Hookit sanding discs conveniently attach to a hook-and-loop backup disc pad (sold separately). They can be easily removed and can be reused for the entire life of the abrasive. For maximum dust extraction use with 3M Elite Random Orbital Sanders and 3M Hookit Clean Sanding pads (both sold separately).

EUR 48.44
1

3M Cubitron II Hookit Clean Sanding Film Disc 775L, 127 mm , Clean Sand, 220+ (Pack of 50)

3M Cubitron II Hookit Clean Sanding Film Disc 775L, 127 mm , Clean Sand, 220+ (Pack of 50)

This 3M™ precision shaped abrasive grain disc is an aluminum oxide, open coat, Hookit™ disc with precise multiple hole design for improved dust extraction. Constructed on a film backing. Primary markets: metalworking, woodworking.Use 3M™ Cubitron™ II Hookit™ Clean Sanding Film Disc 775L for better tear resistance than paper discs. Our discs cut up to two times faster and last up to six times longer than conventional abrasives. The multi-hole pattern on our Clean Sanding products evacuates dust at a higher rate than 5 or 6 hole products. Sandpaper discs cut better and last longer when dust isn’t loading the cutting surface of the abrasives. This design doesn’t require alignment of holes with the disc pad making disc changes fast and simple. An open coat construction means the abrasive grains have space between them to help evacuate dust and other sanding debris. This helps avoid clogging the cutting edge of the grains. The load resistant coating allows the disc to continue cutting even when sanding softwoods, paints and other materials that would usually clog the disc, leading to reduced sanding ability. Our film discs feature 3M Precision Shaped Grain which forms into triangular points that slice through metal rather than gouging or ploughing like traditional abrasives. These points continuously self-sharpen as they fracture, generating an extremely fast cut. 3M offers a complete line of hook and loop style Hookit discs for work spaces where adhesive backed discs may become contaminated by dust or dirt. Hookit discs tend to leave finer finishes than adhesive backed discs, so are often used in applications where a 3M™ Stikit™ disc may be too aggressive. Our discs are ideal for a range of applications focused on stock removal and are effective on a wide variety of substrates – including metals, composites, gelcoat and whitewood. Hookit sanding discs conveniently attach to a hook-and-loop backup disc pad (sold separately). They can be easily removed and can be reused for the entire life of the abrasive. For maximum dust extraction use with 3M Elite Random Orbital Sanders and 3M Hookit Clean Sanding pads (both sold separately).

EUR 43.56
1

3M Cubitron II Hookit Clean Sanding Film Disc 775L, 127 mm, Clean Sand, 120+ (Pack of 50)

3M Cubitron II Hookit Clean Sanding Film Disc 775L, 127 mm, Clean Sand, 120+ (Pack of 50)

This 3M™ precision shaped abrasive grain disc is an aluminum oxide, open coat, Hookit™ disc with precise multiple hole design for improved dust extraction. Constructed on a film backing. Primary markets: metalworking, woodworking.Use 3M™ Cubitron™ II Hookit™ Clean Sanding Film Disc 775L for better tear resistance than paper discs. Our discs cut up to two times faster and last up to six times longer than conventional abrasives. The multi-hole pattern on our Clean Sanding products evacuates dust at a higher rate than 5 or 6 hole products. Sandpaper discs cut better and last longer when dust isn’t loading the cutting surface of the abrasives. This design doesn’t require alignment of holes with the disc pad making disc changes fast and simple. An open coat construction means the abrasive grains have space between them to help evacuate dust and other sanding debris. This helps avoid clogging the cutting edge of the grains. The load resistant coating allows the disc to continue cutting even when sanding softwoods, paints and other materials that would usually clog the disc, leading to reduced sanding ability. Our film discs feature 3M Precision Shaped Grain which forms into triangular points that slice through metal rather than gouging or ploughing like traditional abrasives. These points continuously self-sharpen as they fracture, generating an extremely fast cut. 3M offers a complete line of hook and loop style Hookit discs for work spaces where adhesive backed discs may become contaminated by dust or dirt. Hookit discs tend to leave finer finishes than adhesive backed discs, so are often used in applications where a 3M™ Stikit™ disc may be too aggressive. Our discs are ideal for a range of applications focused on stock removal and are effective on a wide variety of substrates – including metals, composites, gelcoat and whitewood. Hookit sanding discs conveniently attach to a hook-and-loop backup disc pad (sold separately). They can be easily removed and can be reused for the entire life of the abrasive. For maximum dust extraction use with 3M Elite Random Orbital Sanders and 3M Hookit Clean Sanding pads (both sold separately).

EUR 43.56
1

3M Cubitron II Hookit Clean Sanding Film Disc 775L, 152 mm, Clean Sand, 150+ (Pack of 50)

3M Cubitron II Hookit Clean Sanding Film Disc 775L, 152 mm, Clean Sand, 150+ (Pack of 50)

3M™ Cubitron™ II Hookit™ Clean Sanding Film Disc 775L cuts up to two times faster and lasts up to six times longer than conventional abrasives. Our film discs are ideal for a broad range of applications focused primarily on stock removal and are effective on a wide variety of substrates.Use 3M™ Cubitron™ II Hookit™ Clean Sanding Film Disc 775L for better tear resistance than paper discs. Our discs cut up to two times faster and last up to six times longer than conventional abrasives. The multi-hole pattern on our Clean Sanding products evacuates dust at a higher rate than 5 or 6 hole products. Sandpaper discs cut better and last longer when dust isn’t loading the cutting surface of the abrasives. This design doesn’t require alignment of holes with the disc pad making disc changes fast and simple. An open coat construction means the abrasive grains have space between them to help evacuate dust and other sanding debris. This helps avoid clogging the cutting edge of the grains. The load resistant coating allows the disc to continue cutting even when sanding softwoods, paints and other materials that would usually clog the disc, leading to reduced sanding ability. Our film discs feature 3M Precision Shaped Grain which forms into triangular points that slice through metal rather than gouging or ploughing like traditional abrasives. These points continuously self-sharpen as they fracture, generating an extremely fast cut. 3M offers a complete line of hook and loop style Hookit discs for work spaces where adhesive backed discs may become contaminated by dust or dirt. Hookit discs tend to leave finer finishes than adhesive backed discs, so are often used in applications where a 3M™ Stikit™ disc may be too aggressive. Our discs are ideal for a range of applications focused on stock removal and are effective on a wide variety of substrates – including metals, composites, gelcoat and whitewood. Hookit sanding discs conveniently attach to a hook-and-loop backup disc pad (sold separately). They can be easily removed and can be reused for the entire life of the abrasive. For maximum dust extraction use with 3M Elite Random Orbital Sanders and 3M Hookit Clean Sanding pads (both sold separately).

EUR 57.42
1

3M Xtract Cubitron II Hookit Clean Sanding Film Disc 775L, 127 mm, Clean Sand, 320+ (Pack of 50)

3M Xtract Cubitron II Hookit Clean Sanding Film Disc 775L, 127 mm, Clean Sand, 320+ (Pack of 50)

This 3M™ precision shaped abrasive grain disc is an aluminum oxide, open coat, Hookit™ disc with precise multiple hole design for improved dust extraction. Constructed on a film backing. Primary markets: metalworking, woodworking.Use 3M™ Cubitron™ II Hookit™ Clean Sanding Film Disc 775L for better tear resistance than paper discs. Our discs cut up to two times faster and last up to six times longer than conventional abrasives. The multi-hole pattern on our Clean Sanding products evacuates dust at a higher rate than 5 or 6 hole products. Sandpaper discs cut better and last longer when dust isn’t loading the cutting surface of the abrasives. This design doesn’t require alignment of holes with the disc pad making disc changes fast and simple. An open coat construction means the abrasive grains have space between them to help evacuate dust and other sanding debris. This helps avoid clogging the cutting edge of the grains. The load resistant coating allows the disc to continue cutting even when sanding softwoods, paints and other materials that would usually clog the disc, leading to reduced sanding ability. Our film discs feature 3M Precision Shaped Grain which forms into triangular points that slice through metal rather than gouging or ploughing like traditional abrasives. These points continuously self-sharpen as they fracture, generating an extremely fast cut. 3M offers a complete line of hook and loop style Hookit discs for work spaces where adhesive backed discs may become contaminated by dust or dirt. Hookit discs tend to leave finer finishes than adhesive backed discs, so are often used in applications where a 3M™ Stikit™ disc may be too aggressive. Our discs are ideal for a range of applications focused on stock removal and are effective on a wide variety of substrates – including metals, composites, gelcoat and whitewood. Hookit sanding discs conveniently attach to a hook-and-loop backup disc pad (sold separately). They can be easily removed and can be reused for the entire life of the abrasive. For maximum dust extraction use with 3M Elite Random Orbital Sanders and 3M Hookit Clean Sanding pads (both sold separately).

EUR 37.55
1

3M Cubitron II Hookit Clean Sanding Film Disc 775L, 152 mm, Clean Sand, 180+ (Pack of 50)

3M Cubitron II Hookit Clean Sanding Film Disc 775L, 152 mm, Clean Sand, 180+ (Pack of 50)

3M™ Cubitron™ II Hookit™ Clean Sanding Film Disc 775L cuts up to two times faster and lasts up to six times longer than conventional abrasives. Our film discs are ideal for a broad range of applications focused primarily on stock removal and are effective on a wide variety of substrates.Use 3M™ Cubitron™ II Hookit™ Clean Sanding Film Disc 775L for better tear resistance than paper discs. Our discs cut up to two times faster and last up to six times longer than conventional abrasives. The multi-hole pattern on our Clean Sanding products evacuates dust at a higher rate than 5 or 6 hole products. Sandpaper discs cut better and last longer when dust isn’t loading the cutting surface of the abrasives. This design doesn’t require alignment of holes with the disc pad making disc changes fast and simple. An open coat construction means the abrasive grains have space between them to help evacuate dust and other sanding debris. This helps avoid clogging the cutting edge of the grains. The load resistant coating allows the disc to continue cutting even when sanding softwoods, paints and other materials that would usually clog the disc, leading to reduced sanding ability. Our film discs feature 3M Precision Shaped Grain which forms into triangular points that slice through metal rather than gouging or ploughing like traditional abrasives. These points continuously self-sharpen as they fracture, generating an extremely fast cut. 3M offers a complete line of hook and loop style Hookit discs for work spaces where adhesive backed discs may become contaminated by dust or dirt. Hookit discs tend to leave finer finishes than adhesive backed discs, so are often used in applications where a 3M™ Stikit™ disc may be too aggressive. Our discs are ideal for a range of applications focused on stock removal and are effective on a wide variety of substrates – including metals, composites, gelcoat and whitewood. Hookit sanding discs conveniently attach to a hook-and-loop backup disc pad (sold separately). They can be easily removed and can be reused for the entire life of the abrasive. For maximum dust extraction use with 3M Elite Random Orbital Sanders and 3M Hookit Clean Sanding pads (both sold separately).

EUR 57.42
1

3M Cubitron II Hookit Clean Sanding Film Disc 775L, 127 mm, Clean Sand, 80+ (Pack of 50)

3M Cubitron II Hookit Clean Sanding Film Disc 775L, 127 mm, Clean Sand, 80+ (Pack of 50)

This 3M™ precision shaped abrasive grain disc is an aluminum oxide, open coat, Hookit™ disc with precise multiple hole design for improved dust extraction. Constructed on a film backing. Primary markets: metalworking, woodworking.Use 3M™ Cubitron™ II Hookit™ Clean Sanding Film Disc 775L for better tear resistance than paper discs. Our discs cut up to two times faster and last up to six times longer than conventional abrasives. The multi-hole pattern on our Clean Sanding products evacuates dust at a higher rate than 5 or 6 hole products. Sandpaper discs cut better and last longer when dust isn’t loading the cutting surface of the abrasives. This design doesn’t require alignment of holes with the disc pad making disc changes fast and simple. An open coat construction means the abrasive grains have space between them to help evacuate dust and other sanding debris. This helps avoid clogging the cutting edge of the grains. The load resistant coating allows the disc to continue cutting even when sanding softwoods, paints and other materials that would usually clog the disc, leading to reduced sanding ability. Our film discs feature 3M Precision Shaped Grain which forms into triangular points that slice through metal rather than gouging or ploughing like traditional abrasives. These points continuously self-sharpen as they fracture, generating an extremely fast cut. 3M offers a complete line of hook and loop style Hookit discs for work spaces where adhesive backed discs may become contaminated by dust or dirt. Hookit discs tend to leave finer finishes than adhesive backed discs, so are often used in applications where a 3M™ Stikit™ disc may be too aggressive. Our discs are ideal for a range of applications focused on stock removal and are effective on a wide variety of substrates – including metals, composites, gelcoat and whitewood. Hookit sanding discs conveniently attach to a hook-and-loop backup disc pad (sold separately). They can be easily removed and can be reused for the entire life of the abrasive. For maximum dust extraction use with 3M Elite Random Orbital Sanders and 3M Hookit Clean Sanding pads (both sold separately).

EUR 43.56
1

3M Fibre Disc 782C, 115 mm x 22 mm, 36+, Slotted (Pack of 25)

3M Fibre Disc 782C, 115 mm x 22 mm, 36+, Slotted (Pack of 25)

3M™ Fibre Disc 782C is a fibre disc engineered for an ultra-rapid cut on carbon steel. These discs feature our advanced abrasive technology, 3M Precision Shaped Grain. Their stiff fibre backing and strong resin bond provides durability and tear resistance. These discs are compatible with 3M disc pad face plates and hubs (sold separately).Engineered for ultra-rapid cut on carbon steel, 3M™ Fibre Disc 782C offers outstanding cut, durability, and ease of use. Our discs are a major step up in performance over conventional fibre discs. Advanced abrasive technology makes it an excellent choice for tough applications including weld removal, blending and finish refinement. Premium performance tackles carbon steel applications Balance cost and output by selecting the abrasive with precisely the right amount of cut and life. These discs contain Precision Shaped Grain (PSG) to optimise the balance of speed and longevity for many of your carbon steel operations. Disc construction includes a stiff fibre backing and strong resin bond that provide durability and tear resistance, which along with fast cutting abrasive grain enables operators to complete more parts per disc, and requires fewer disc changes. The exceptional life and cut of 782C make it one of 3M’s best grinding discs for high production environments, providing significant gains over conventional fibre discs. With jobs where a higher-tier fibre disc could be under-utilised, but productivity is still your bottom line, these fibre discs deliver outstanding throughput. They’re an excellent choice for a range of applications including edge chamfering, bevelling, deburring, and weld removal. Step up production with 3M Precision Shaped Grain Developed for improved output on light to heavy stock removal, 3M Precision Shaped Grain lets operators finish tough tasks faster and with less fatigue. Because the grain wears evenly and stays sharp, PSG abrasives last significantly longer than their conventional ceramic counterparts, ensuring extended high performance in production applications. To accomplish this level of performance, 3M engineers apply proprietary micro replication technology to create precise triangular structures of 3M Ceramic Abrasive Grain, and then electrostatically orient them on the backing to form sharp peaks. These ultra-sharp peaks slice cleanly through metal rather than gouging or ‘ploughing’ as conventional abrasives do, and continuously self-sharpen as the points break off. Tips for optimal use Fibre discs are heavy duty abrasives featuring a tough, stiff backing made from vulcanised fibre that resists wear, and can handle tough grinding applications. For optimal performance, these discs should be used with a back up pad of the appropriate density for the application—a lighter density back up pad for lighter weight grinding applications, and a harder density back up pad for more heavy weight grinding applications. Using the correct back up pad for the application ensures that the abrasive mineral will re-sharpen, maximising the life of the abrasive. 3M engineered for peak productivity 3M Abrasives engineers know abrasive construction. For more than 100 years 3M has been a leading abrasive supplier for the metalworking and woodworking industries, and offer a complete line of high quality metalworking abrasive solutions to meet your tough jobs. Fibre Disc 782C is designed to enable operators to take production to the next level by completing more work in less time. It is a prime example of how 3M science provides advanced solutions to help industrial businesses operate faster, better and more efficiently.

EUR 38.64
1

3M Fibre Disc 782C, 125 mm x 22 mm, 80+, Slotted (Pack of 25)

3M Fibre Disc 782C, 125 mm x 22 mm, 80+, Slotted (Pack of 25)

3M™ Fibre Disc 782C is a fibre disc engineered for an ultra-rapid cut on carbon steel. These discs feature our advanced abrasive technology, 3M Precision Shaped Grain. Their stiff fibre backing and strong resin bond provides durability and tear resistance. These discs are compatible with 3M disc pad face plates and hubs (sold separately).Engineered for ultra-rapid cut on carbon steel, 3M™ Fibre Disc 782C offers outstanding cut, durability, and ease of use. Our discs are a major step up in performance over conventional fibre discs. Advanced abrasive technology makes it an excellent choice for tough applications including weld removal, blending and finish refinement. Premium performance tackles carbon steel applications Balance cost and output by selecting the abrasive with precisely the right amount of cut and life. These discs contain Precision Shaped Grain (PSG) to optimise the balance of speed and longevity for many of your carbon steel operations. Disc construction includes a stiff fibre backing and strong resin bond that provide durability and tear resistance, which along with fast cutting abrasive grain enables operators to complete more parts per disc, and requires fewer disc changes. The exceptional life and cut of 782C make it one of 3M’s best grinding discs for high production environments, providing significant gains over conventional fibre discs. With jobs where a higher-tier fibre disc could be under-utilised, but productivity is still your bottom line, these fibre discs deliver outstanding throughput. They’re an excellent choice for a range of applications including edge chamfering, bevelling, deburring, and weld removal. Step up production with 3M Precision Shaped Grain Developed for improved output on light to heavy stock removal, 3M Precision Shaped Grain lets operators finish tough tasks faster and with less fatigue. Because the grain wears evenly and stays sharp, PSG abrasives last significantly longer than their conventional ceramic counterparts, ensuring extended high performance in production applications. To accomplish this level of performance, 3M engineers apply proprietary micro replication technology to create precise triangular structures of 3M Ceramic Abrasive Grain, and then electrostatically orient them on the backing to form sharp peaks. These ultra-sharp peaks slice cleanly through metal rather than gouging or ‘ploughing’ as conventional abrasives do, and continuously self-sharpen as the points break off. Tips for optimal use Fibre discs are heavy duty abrasives featuring a tough, stiff backing made from vulcanised fibre that resists wear, and can handle tough grinding applications. For optimal performance, these discs should be used with a back up pad of the appropriate density for the application—a lighter density back up pad for lighter weight grinding applications, and a harder density back up pad for more heavy weight grinding applications. Using the correct back up pad for the application ensures that the abrasive mineral will re-sharpen, maximising the life of the abrasive. 3M engineered for peak productivity 3M Abrasives engineers know abrasive construction. For more than 100 years 3M has been a leading abrasive supplier for the metalworking and woodworking industries, and offer a complete line of high quality metalworking abrasive solutions to meet your tough jobs. Fibre Disc 782C is designed to enable operators to take production to the next level by completing more work in less time. It is a prime example of how 3M science provides advanced solutions to help industrial businesses operate faster, better and more efficiently.

EUR 44.98
1