front leash harness from EUR 16 | See the cheapest prices and offers on css.lazzaweb.dk

Sealey FPSFC Fork Cradle Supports for Front Paddock Stands

Optional fork cradle support for front paddock stands. Designed to cradle and lift the front forks of a motorcycle for cleaning and storage. Yellow phosphate finish for added corrosion resistance. For safety always ensure that the rear of the bike is supported securely prior to lifting the front end of the motorcycle.

EUR 17.11

1

Sealey FPS7 Motorcycle Front Wheel Chock Heavy-Duty

Tubular wheel chock supports the front wheel of the motorcycle when in transit or storage. Fully adjustable to fit wheels 15"-21"(380-535mm). Features a pivot clamp which locks the front wheel securely by the motorcycle weight. Chock can be used freestanding or fixed to any hard surface.

EUR 134.00

1

Sealey FPS5 Front Headstock Stand

Strong tubular frame supplied with a range of pins to fit the most common headstock sizes. Once in place, access to all mechanical components at the front of the bike is made easy. Stand folds down for compact storage when not in use. Supplied with width and angle adjustable rubber support pads to quickly and easily use as rear support stand.

EUR 149.70

1

Sealey VSE4781 Front Suspension Bush Tool - VAG

Suitable for the removal/installation of the rear mounting bush on the front lower wishbone. Can be used in situ without removing the aluminium housing. Use with 24mm spanner only. Supplied in storage case.

EUR 120.00

1

Sealey FPS6 Motorcycle Front Wheel Chock

Features adjustable pivoting wheel guide, which secures front wheel within chock. Three adjustable heights depending on diameter of wheel. Suitable for wheels with tyre widths 90-130mm and diameters 17"-21"(430-535mm). Base can be permanently bolted to the floor (fixings included), and features a detachable upper assembly that can be easily stored and re-attached when required, stabilising motorcycles without the need for side or centre stands. Base features lashing strap gap for securing the bike in transport.

EUR 63.60

1

Sealey CSC5 Front Seat Protector Set 2pc Lightweight

Set includes two reusable front seat covers. Manufactured from water-resistant lightweight nylon. Ideal for protecting the vehicle's interior from dirt, grease and oil, as well as food and drink spills. Suitable for most cars and light commercial vehicles. Can be fitted to seats with or without airbags.

EUR 21.00

1

Sealey APMS54 Modular Wall Cabinet Tambour Front 680mm

For use with Model No's APMS51, APMS52, APMS57 and APMS59 Floor Cabinets. Supplied with appropriate fixings to make integral self supporting unit, or use in conjunction with Model No. APMS50BP Back Panel and upright supports if part of a larger modular system. Tambour style front for easy-access. Aluminium handles.

EUR 164.00

1

Sealey CSC6 Front Seat Protector Set 2pc Heavy-Duty

Set includes two reusable front seat covers. Manufactured from heavy-duty water-resistant nylon. Ideal for protecting the vehicle's interior from dirt, grease and oil, as well as food and drink spills. Suitable for most cars and light commercial vehicles. Can be fitted to seats with or without airbags.

EUR 30.36

1

Sealey VSE725 Front Axle Upper Ball Joint Extractor/Installer - VW T4

Suitable for removing and installing the upper front ball joint in situ without the need to disassemble. Features various adaptors used in different combinations for extracting and installing. Supplied in a storage case with each part numbered for simple selection.

EUR 219.00

1

Sealey SDBC1 Tungsten Carbide Rotary Burr Cylindrical Front End Cut Ripper/Coarse

Rotary burr with cylindrical front end cut. Manufactured from Tungsten Carbide with coarse teeth for aluminium or plastic cutting. Supplied in plastic storage box. Available individually or as a 3 or 5pc set.

EUR 27.17

1

Sealey VSE4785 Front Pivot Arm Bush Tool - Peugeot 407/508, Citroen C5/C6

Suitable for the removal/installation of the front lower suspension pivot arm bush. Can be used in situ without removing the aluminium hub carrier from the vehicle.

EUR 89.30

1

Sealey SX032 Oxygen Sensor Socket Set 7pc 3/8" & 1/2"Sq Drive

Suitable for Titania and Zirconia oxygen sensors found on most modern vehicles. Windows and slots enable sockets to be fitted over wiring harness.

EUR 84.71

1

Sealey SAC3103B Air Compressor 100L Belt Drive 3hp with Front Control Panel

Twin capacitors and a centrifugal switch aid trouble-free start-up on a good 13A supply. Pump features heavy-duty full cast cylinders, capped by alloy heads for improved heat dissipation and long-life. Features an easy-to-use bespoke control panel with two outlets, one regulated and one direct. Heavy-duty pneumatic wheels with single front castor for easy manoeuvrability. Supplied with hose reel to keep your workspace tidy. Includes a drain valve for easy release of condensed water build-up in the tank.

EUR 1182.00

1

Sealey SAC3153B Air Compressor 150L Belt Drive 3hp with Front Control Panel

Twin capacitors and a centrifugal switch aid trouble-free start-up on a good 13A supply. Pump features heavy-duty full cast cylinders, capped by alloy heads for improved heat dissipation and long-life. Features an easy-to-use bespoke control panel with two outlets, one regulated and one direct. Heavy-duty drive guards protect belt and flywheel that is designed to force air over the pump to aid cooling. Heavy-duty pneumatic wheels with single front lockable castor for easy manoeuvrability. Supplied with hose reel to keep your workspace tidy. Includes a drain valve for easy release of condensed water build-up in the tank.

EUR 1300.00

1

Sealey SAC3203B Air Compressor 200L Belt Drive 3hp with Front Control Panel

Twin capacitors and a centrifugal switch aid trouble-free start-up on a good 13A supply. Pump features heavy-duty full cast cylinders, capped by alloy heads for improved heat dissipation and long-life. Features an easy-to-use bespoke control panel with two outlets, one regulated and one direct. Heavy-duty drive guards protect belt and flywheel that is designed to force air over the pump to aid cooling. Heavy-duty pneumatic wheels with single front lockable castor for easy manoeuvrability. Supplied with hose reel to keep your workspace tidy. Includes a drain valve for easy release of condensed water build-up in the tank.

EUR 1492.60

1

Sealey SX0320 Oxygen Sensor & Thread Chaser Set 5pc

Suitable for oxygen sensors found on most modern vehicles. Cut-out and slots enable sockets to be fitted over wiring harness. Includes two chasers for cleaning and repairing damaged threads. Supplied in storage case.

EUR 50.40

1

Sealey SAC3203B3PH Air Compressor 200L Belt Drive 3hp with Front Control Panel 415V 3ph

Heavy-duty 3-phase compressor suitable for the professional workshop. Triple cylinder pump system coupled with a 3hp motor maximizes performance to keep running costs low compared to single stage, single phase models. Pump features heavy-duty full cast cylinders, capped by an alloy heads for improved heat dissipation and long-life. Features an easy-to-use bespoke control panel with two outlets, one regulated and one direct. Heavy-duty drive guards protect belt and flywheel that is designed to force air over the pump to aid cooling. Heavy-duty pneumatic wheels with single front lockable castor for easy manoeuvrability. Supplied with hose reel to keep your workspace tidy. Full CE certification, test certificates and operating/maintenance manual. Includes a drain valve for easy release of condensed water build-up in the tank.

EUR 1552.90

1

Sealey PC477AK1 Front Mounting Squeegee for PC477

Squeegee attachment for Model No. PC477 - Industrial Wet/Dry Vacuum Cleaner. Designed for improved floor cleaning results, particularly for liquids.

EUR 195.00

1

Sealey VS211 Fuel Injector Tester 12V - Petrol

Operates injectors individually to diagnose fuel delivery problems on petrol vehicles with electronic fuel injection. Works with engine off and pulse timer may be used with fuel pressure gauge. Powered by vehicle’s 12V battery.Can be used to locate fuel system faults such as:• Clogged or leaking fuel injectors.• Sluggish or sticky fuel injectors.• Wiring harness faults.• Fuel injector driver signal faults.

EUR 69.38

1

Sealey 502W Safety Helmet - Vented (White)

Available in seven colours. Widely accepted colour-coding indicates White = Site Manager/Competent Operative/Vehicle Marshall + Vest Sticker. Vented for user comfort. Hearing and face shield accessories available. Ratchet suspension harness. Pop, twist and lock fitting system prevents unintentional loosening of headband. Material webbing cradle rather than rigid plastic means greater comfort when wearing all day. Conforms to BS EN397.

EUR 16.38

1

Sealey SDB01 Tungsten Carbide Rotary Burr Cylindrical Front End Cut Ø10mm

Rotary burr manufactured from Tungsten Carbide with No. 6 cut (universal) with various shaped heads. For use on soft and hard metal, including welded seams. Supplied in plastic storage box.

EUR 21.30

1

Sealey VS7021 Wheel Bearing Removal/Installation Kit

Suitable for the installation and removal of front hub bearings without the need to dismantle the steering knuckle and strut assembly. Fast and simple-to-use. Suitable for most front wheel drive cars. Heavy-duty steel drifts with black phosphate finish for corrosion resistance. May be used with impact wrench.

EUR 168.00

1

Sealey MPS2 Two Arm Centre Stand

Quickly and safely lifts and stabilises front or back of a motorcycle with a traditional style double cradle frame design that has no engine, transmission or exhaust protrusions. Features height adjustment and soft PVC sheath for protection to underside of bike. Design of stand allows easy wheel maintenance and removal of front or rear wheel.

EUR 85.00

1

Sealey WCR02 Motorcycle Roll-in Wheel Clamp - Bolt Down

Increases the stability of the motorcycle by clamping the bottom and front of the tyre. Features a pivot clamp which locks the front wheel securely by the motorcycle weight. Suitable for fitting on trailers, in vans or to motorcycle lifts (Requires suitable fixings). Fully adjustable to fit wheels Ø15"-21"(380-535mm). Minimum/Maximum Tyre Width: 50-130mm. Please note: Motorcycle must also be secured using tie down straps. Fittings not included.

EUR 86.68

1

Sealey MS711 Motorcycle Disc Brake Piston Spreader Tool

Essential tool for retracting the brake piston to allow insertion of new brake pads. Suitable for most front and rear motorcycle brake calipers.

EUR 36.69

1

Awardvindende Google Marketing Powerhouse

Brand

Colour

Merchant

Price (EUR)