Awardvindende Google Marketing Powerhouse

Sealey VS528 Oxygen Sensor Port Thread Chaser M18 x 1.5mm

Suitable for cleaning and repairing damaged threads on the exhaust oxygen sensor port. Use with 21mm socket.

Sealey VS527 Oxygen Sensor Port Thread Chaser M12 x 1.25mm

Suitable for cleaning and repairing damaged threads on the exhaust oxygen sensor port. Use with 21mm socket.

Sealey HT111LED Head Torch 5W COB LED Auto-Sensor

Hands-free 5W COB LED spotlight with 40° angle adjustment. Dimmer switch allows brightness to be adjusted from 20% to 100%. Main light has one switch with four functions, on, flash, auto-sensor and off. Hold down switch to enable auto-sensor function which will allow turning on/off just by waving hand in front. Rear of strap includes a red LED warning light which has two functions, flash or on, ideal for a cycling light. Adjustable headband and foam brow for added comfort. Powered by 3 x AA batteries (not included).

Sealey VS925 Lambda Sensor Tester/Simulator

Tests Zirconia and Titania lambda sensors and ECU. Suitable for 1, 2, 3 and 4 wire sensors, heated and unheated. LED display shows crossover signal from sensor. Simulates rich or lean mixture signals to check ECU response. Insulation-piercing clip for quick and easy connection plus display to confirm wire identity. Features a low battery indicator and powered by 9V battery (supplied).

Sealey HT111R Rechargeable Head Torch 5W COB LED Auto-Sensor

Hands-free 5W COB LED spotlight with 40° angle adjustment. Dimmer switch allows brightness to be adjusted from 20% to 100%. Main light has one switch with four functions, on, flash, auto-sensor and off. Hold down switch to enable auto-sensor function which will allow turning on/off just by waving hand in front. Rear of strap includes a red LED warning light which has two functions, flash or on, ideal for a cycling light. Adjustable headband and foam brow for added comfort. Includes a battery charging level indicator. Powered by rechargeable 3.7V 2.2Ah Lithium-ion battery. Supplied with micro USB charging lead.

Sealey HT106LED Head Torch 3W CREE* LED Auto-Sensor Rechargeable

Hands-free 3W CREE* XPE LED spotlight with adjustable inclination to direct light as required. Features auto-sensor to switch on/off just by waving hand in front. Alternatively can be overridden to stay on/off by push-button. Two brightness settings. Adjustable headband and foam brow for added comfort. Powered by rechargeable Lithium-Polymer 3.7V 1.5Ah battery. Supplied with micro USB charging lead.

Sealey HT108LED Rechargeable Head Torch 5W CREE* XPG LED Auto-Sensor

Hands-free head torch with adjustable 5W CREE* XPG LED spotlight to direct light as required. Features auto-sensor to activate light with the wave of a hand and standard on/off switch. Two power options of full and a 30% energy saving mode. Powered by rechargeable 3.7V 2Ah Lithium-ion battery. Supplied with micro USB charging lead.

Sealey HT102R Rechargeable Head Torch 3W CREE* XPE LED Auto-Sensor

Hands-free head torch with adjustable 3W CREE* XPE LED spotlight to direct light as required. One switch features an auto-sensor to activate light with the wave of a hand and standard on/off switch. Produces up to 125 lumens. Other switch has four options - full, 50% energy saving mode, flash and red light. Powered by a rechargeable 3.7V 1.2Ah Lithium-ion battery. Supplied with micro USB charging lead.

Sealey GL93 Auto Light 1W COB LED with PIR Sensor 3 x AA Cell

Manufactured from a lightweight composite material. Two 0.5W bright white COB LEDs. Easily positioned on a 90° axis. Simple on/off switch or automatic setting, which switches the LEDs on when the PIR sensor detects movement. Suitable for garden sheds, garages or around the home. Requires 3 x AA batteries (not included).

Sealey LED360HT Rechargeable Head Torch 2W COB LED Auto-Sensor Black

New design 360° multifunction COB LED rechargeable head torch. Headband can also be used as a wristband. When the band is removed, the work light can be attached to objects via the integral clip. Can also be used as a standalone table light. One button includes five different lighting options. First press is 100% white light, second dims to 40% white light, third is red warning light (1W COB LED) and fourth is red warning flash, which makes it ideal for cycling. Holding the button enables auto-sensor function to switch on/off just by waving hand in front. Adjustable head/wristband and foam brow for added comfort. Powered by 3.7V 0.5Ah Li-Poly battery. Supplied with micro USB charging cable.

Sealey LED360HTG Rechargeable Head Torch 2W COB LED Auto-Sensor Green

New design 360° multifunction COB LED rechargeable head torch. Headband can also be used as a wristband. When the band is removed, the work light can be attached to objects via the integral clip. Can also be used as a standalone table light. One button includes five different lighting options. First press is 100% white light, second dims to 40% white light, third is red warning light (1W COB LED) and fourth is red warning flash, which makes it ideal for cycling. Holding the button enables auto-sensor function to switch on/off just by waving hand in front. Adjustable head/wristband and foam brow for added comfort. Powered by 3.7V 0.5Ah Lithium-Polymer battery. Supplied with micro USB charging cable.

Sealey LED360HTDB Rechargeable Head Torch Auto-Sensor Black 2W COB LED Display Box of 12

Display box includes 4 x Green, 4 x Red and 4 x Black models. New design 360° multifunction COB LED rechargeable head torch. Headband can also be used as a wristband. When the band is removed, the work light can be attached to objects via the integral clip. Can also be used as a standalone table light. One button includes five different lighting options. First press is 100% white light, second dims to 40% white light, third is red warning light (1W COB LED) and fourth is red warning flash, which makes it ideal for cycling. Holding the button enables auto-sensor function to switch on/off just by waving hand in front. Adjustable head/wristband and foam brow for added comfort. Powered by 3.7V 0.5Ah Lithium-Polymer battery. Supplied with micro USB charging cable.

Sealey Flame Sensor Replacement for Heater

Sealey SX0320 Oxygen Sensor & Thread Chaser Set 5pc

Suitable for oxygen sensors found on most modern vehicles. Cut-out and slots enable sockets to be fitted over wiring harness. Includes two chasers for cleaning and repairing damaged threads. Supplied in storage case.

Sealey TST18 Torque Limited Tyre Valve Tool 0.45Nm

Pocket size tool specifically designed to prevent over tightening of valve cores fitted to wheels/tyres with TPMS. Over-torquing can easily damage delicate pressure sensor packs, causing expensive repairs.

Sealey LEDSTR03 LED Strip Lighting 3pc

Linkable LED strip lights with PIR and CDS sensor. The sensor only works in dark (illuminance ?10-20 LUX). The PIR and CDS sensor can be set to two modes, 30 seconds and 1 minute before turning off. This allows you to leave the light on when not in use and it will turn off after the set period when no movement is detected. Each strip features 6 SMD LEDs and can be linked to up to five strips. Each pack includes two corner extensions, one cover for the end of the strip and six metal clips with option of using the included screws or adhesive strips to attach to almost any surface. USB powered and can be used with the battery case supplied (4 x AAA batteries not included) which can also be mounted using the bracket supplied, any 5V?1A/2A power bank or a 5V?1A/2A USB plug adaptor.

Sealey VS906 Mini Digital Thermometer

High precision digital thermometer with the sensor located in the tip of the stainless steel probe. Compact and lightweight, measuring both °C and °F with hold function. Ideal for testing automotive air conditioning output. Powered by 1.5V battery (supplied).

Sealey LED115PIR Extra Slim Floodlight with PIR Sensor 100W SMD LED

Mounted in die-cast powder coated aluminium extra slim housing with wall bracket. SMD LED technology allows ultra-bright illumination whilst still keeping costs lower than traditional halogen tubes. Even spread of light across a 110° angle. Features a PIR motion detector. Suitable for outdoor mounting.

Sealey LED113PIR Extra Slim Floodlight with PIR Sensor 50W SMD LED

Mounted in die-cast powder coated aluminium extra slim housing with wall bracket. SMD LED technology allows ultra-bright illumination whilst still keeping costs lower than traditional halogen tubes. Even spread of light across a 110° angle. Features a PIR motion detector. Supplied with power cable only and suitable for outdoor mounting.

Sealey TA101 Digital Automotive Analyser 12-Function

Durable case and integral stand suitable for the toughest workshop conditions. Large, high-contrast LCD display with 18mm high digital read-out and analogue bar graph. Includes auto-ranging, data-hold, auto-polarity, auto-power-off and low battery display functions. Bar graph simplifies lambda sensor testing. Supplied with capped test probes and K-type thermocouple.

Sealey SX032 Oxygen Sensor Socket Set 7pc 3/8" & 1/2"Sq Drive

Suitable for Titania and Zirconia oxygen sensors found on most modern vehicles. Windows and slots enable sockets to be fitted over wiring harness.

Sealey VS5235 Petrol Engine Timing Tool Kit, GM, Chevrolet, Suzuki 1.0, 1.2, 1.4, 1.6 - Chain Drive

Covers a wide range of Vauxhall/Opel and Chevrolet petrol engines. Includes the necessary tools for setting and locking the camshafts and crankshaft. Also includes the pins for locking the timing chain tensioner, locking tools for 1.0, 1.2, 1.4, 1.6 EcoTec/EcoFLEX (codes X and Z) chain engines, and the timing disc position gauge for the timing sensor on the inlet camshaft. Supplied in storage case with instructions and a warning tag.

Sealey IR55 Infrared Paraffin/Kerosene/Diesel Heater 45.5kW 230V

Infrared heater suitable for well ventilated applications. Designed to increase heat efficiency while eliminating the fragility and brittleness of ceramic cones. Clean burning unit operates on paraffin, kerosene or diesel. Produces an impressive output of 155,252 Btu/hr. 65L Tank allows a maximum of 15hrs running time. Features electronic flame control with photo resistance sensor. Outer cover cooled by forced air over the complete surface of the cone. Complies with rigorous standards and is fitted with a safety cut-out.

Sealey VSE953 Catalytic Converter Back Pressure Test Kit

Used to establish the working condition of the catalytic converter and silencer by measuring the relative back pressure of the system. Simply connect into the exhaust system using either of the two oxygen sensor dummy adaptors supplied in the kit. Gauge features a colour-coded scale for easy diagnosis and reads both pressure and vacuum so can be used on other areas of the vehicle allowing testing of low pressure fuel systems or engine vacuum. Supplied with gauge hanging chain to allow hands-free operation.

Sealey SM353CE Bandsaw 400mm Horizontal Hydraulic Arm

• Manufactured to comply with Safety of Machinery (Safety) Directives 1992 (and amendments) and fully CE approved. • Saw arm is fitted with hydraulic damping to prevent the arm being dropped onto the workpiece and to ensure smooth cutting performance. • Coolant fluid system. • 24V system for coolant pump and motor controls gives added safety to operator. • Heavy-duty single phase electric motor with over-current sensor to cut power in the event of blade jam. • This item is heavy. Extra assistance must be provided at the delivery point to help its safe delivery.