knee support for walking from EUR 6 | See the cheapest prices and offers on css.lazzaweb.dk

Sealey 9711 Hard Shell Gel Knee Pads - Pair

Hard-wearing composite front cover for extended life with an anti-slip grip design. Adjustable wide straps. Gel core shapes to knee for comfort.

EUR 31.14

1

Sealey SSP63 Heavy-Duty Double Gel Knee Pads - Pair

Anti-compression genuine double gel foam gives maximum cushioning for added comfort and manoeuvrability. Hard-wearing non-scratch pads for extended life. Twin hook-and-loop straps offer a more comfortable fit and stops knee pads from slipping.

EUR 30.00

1

Sealey ASC50 High Level Commercial Vehicle Support Stand 5tonne

Heavy-duty high level stand to safely support vehicles when wheel free operations are being carried out. Independently UK load tested. Supplied with three interchangeable crutches for even load support. Heavy gauge steel frame and welded construction give superior strength and safety. Features captive, spring-assisted, multi-position pin load support and retracting castors for easy manoeuvrability. Ideal for commercial vehicles. Sold as singles, but MUST be used in pairs, or multiples of.

EUR 804.00

1

Sealey High Level Commercial Vehicle Support Stand 7 Tonne

Heavy-duty high level stand to safely support vehicles when wheel free operations are being carried out. Independently UK load tested. Supplied with three interchangeable crutches for even load support. Heavy gauge steel frame and welded construction give superior strength and safety. Features captive, spring-assisted, multi-position pin load support and retracting castors for easy manoeuvrability. Ideal for commercial vehicles. Sold as singles, but MUST be used in pairs, or multiples of.

EUR 972.00

1

Sealey ASC120 High Level Commercial Vehicle Support Stand 12tonne

Heavy-duty high level stand to safely support vehicles when wheel free operations are being carried out. Independently UK load tested. Supplied with three interchangeable crutches for even load support. Heavy gauge steel frame and welded construction give superior strength and safety. Features captive, spring-assisted, multi-position pin load support and retracting castors for easy manoeuvrability. Ideal for commercial vehicles. Sold as singles, but MUST be used in pairs, or multiples of.

EUR 990.00

1

Sealey VS7037 Adjustable Press Support Plate

Designed to be used with a standard workshop press. Adjustable diameter and six interchangeable support legs provide quick alignment of hub or suspension frame for secure and level pressing. Ideal when removing and installing wheel bearings and bushes.

EUR 336.00

1

Sealey VS7036 Universal Press Support Block

Designed to be used with a standard workshop press. Multiple threaded holes in aluminium base plate enable the support bars to be installed in virtually any position, allowing the bearing or bush to be positioned horizontally. Includes a packing block for added versatility. Ideal for the removal of wheel bearings and bushes.

EUR 271.00

1

Sealey SPBC30 Battery Support Unit & Charger 30A

Fully automatic 7-stage battery charger, designed for charging a variety of EFB & AGM (stop/start), GEL, lead acid and calcium batteries with auto chemistry selection. Additional function to charge lithium batteries via selection button on front of unit. Zero volt battery charging, enabling recovery and charging of a completely discharged battery (providing any load removed from the rechargeable battery). Old battery sulfation repair function. 13.5V DC power supply for battery support function providing support for the battery during prolonged electronic diagnostic checks. Reverse polarity, short circuit, over temperature and overcharging protection. Built-in cooling fan that only operates when required. Intuitive LED screen displays charging voltage, current, battery capacity percentage, automatically selected 6V/12V or 24V charging, lithium charging mode, DC power supply mode and illuminated charging stages. Compact design with mounting brackets for permanent fitting.

EUR 393.10

1

Sealey SPBC40 Battery Support Unit & Charger 40A

Fully automatic 7-stage battery charger, designed for charging a variety of EFB & AGM (stop/start), GEL, lead acid and calcium batteries with auto chemistry selection. Additional function to charge lithium batteries via selection button on front of unit. Zero volt battery charging, enabling recovery and charging of a completely discharged battery (providing any load removed from the rechargeable battery). Old battery sulfation repair function. 13.5V DC power supply for battery support function providing support for the battery during prolonged electronic diagnostic checks. Reverse polarity, short circuit, over temperature and overcharging protection. Built-in cooling fan that only operates when required. Intuitive LED screen displays charging voltage, current, battery capacity percentage, automatically selected 6V/12V or 24V charging, lithium charging mode, DC power supply mode and illuminated charging stages. Compact design with mounting brackets for permanent fitting.

EUR 490.50

1

Sealey 9707L Back Support Belt Large - 965-1120mm

Designed to give all day support whilst bending and lifting.

EUR 8.24

1

Sealey 9707M Back Support Belt Medium - 840-1020mm

Designed to give all day support whilst bending and lifting.

EUR 6.29

1

Sealey ES601 Engine Support Beam with Cross Beam 500kg Capacity

Designed to support and assist to accurately position engines during maintenance operations such as replacing anti-vibration mountings and certain body panels. Also used as an aid for the removal of gearboxes and transmissions. Beams supported on rubber feet and fine adjustment control is obtained by using screw/hook mechanisms. This model has the additional advantage of a 360° adjustable rotating cross beam to enable a greater range of support options when in use.

EUR 257.10

1

Sealey BSCU25 Battery Support Unit & Charger 12V-25A/24V-12.5A

High frequency inverter type unit designed to both charge a battery and provide support for the battery during prolonged electronic diagnostic checks. Charge cycle has nine profiles designed to optimise the condition of the battery and the speed of the charge. Designed for use with vehicle batteries including Calcium, Wet, Gel, AGM and VRLA types on 12V and 24V systems. High frequency inverter type unit designed to both charge a battery and provide support for the battery during prolonged electronic diagnostic checks. Charge cycle has nine profiles designed to optimise the condition of the battery and the speed of the charge. Designed for use with vehicle batteries including Calcium, Wet, Gel, AGM and VRLA types on 12V and 24V systems. Temperature sensor allows accurate charging of battery, even when cold. Safety circuitry prevents sparks or polarity reversal. Once fully charged, battery may be left connected to be automatically conditioned and maintained.

EUR 242.00

1

Sealey VS5214 Engine Support Bracket - for BMW Mini

Designed to provide a safe secure method for supporting the engine if the engine mounting has to be removed for cylinder head work. Prevents the engine from slipping or dropping unexpectedly. When installed the vehicle can be moved to another location without the need to use a lifting device. Suitable for N12, N14, N16 and N18 Engines fitted in BMW Mini models.

EUR 44.06

1

Sealey BSCU170 Schumacher Battery Support Unit & Charger - 12V 100A

Fully automatic microprocessor controlled unit designed to both charge a battery and provide support for the battery during prolonged electronic diagnostic checks. Up to 100Amp power supply maintains stable voltage under varying loads during major vehicle ECU reprogramming and diagnostic work. Voltage settings between 13-14.8V for programming. 5m Heavy-duty cable, clamps and Anderson plug. Recovery/Desulfation mode will recover a discharged battery (>2V) to almost 100% of its original capacity. 70A continuous output current or up to 100A maximum for up to three minutes as required. Patent-Pending “thermal runaway” protection and algorithms allow fast and safe charging. Designed for use with regular automotive, lead-acid, calcium, AGM/GEL and start-stop battery types. Dual temperature controlled cooling fans. Once fully charged, battery may be left connected to be automatically conditioned and maintained. Mounting brackets for installation on vehicle lifts. Durable aluminium case.

EUR 952.00

1

Sealey RPS1BS Bobbin Supports for RPS2

Optional Bobbin Support for Model No. RPS2. Designed to give extra support and added stability once rear axle has been located and raised. Yellow phosphate finish for added corrosion resistance.

EUR 17.15

1

Sealey ADT7 Adjustable Gearbox Support 500kg Capacity for 300ETJ & 500ETJ

Fully adjustable saddle with forward, backward and side-to-side tilt. Suitable for use with Model No's 300ETJ and 500ETJ.

EUR 167.60

1

Sealey ES502 Engine Support Beam 500kg Capacity Double Support

Supports and accurately positions engine during maintenance operations such as replacing anti-vibration mountings and certain body panels. Also used as an aid for the removal of gearboxes and transmissions. Beam supported on rubber feet and fine adjustment control is obtained by using double screw/hook mechanisms. Supplied with two short lengths of chain.

EUR 221.90

1