135 results (0,16344 seconds)

Show all filters

Brand

Merchant

Price (EUR)

Show all

Reset filter

Products
From
Shops

Teng TTPC09 Punch & Chisel Set, 9 Piece

Teng TTPC09 Punch & Chisel Set, 9 Piece

This Teng Tools 9 piece punch set contains a selection of punches and cold chisels. These striking tools are made of steel, which is hardened to ensure a long working life. The pin punches can be used to drive pins for affixing a fixture to a rotating shaft, whereas the centre punch is ideal for marking the centre of a point as a guide for drilling. Supplied in storage tray. Contents: 1 x 150mm Centre Punch: 5mm.6 x 150mm Parallel Punches: 3, 4, 5, 6, 7 and 8mm.1 x 150mm Flat Chisel: 19mm.1 x 200mm Flat Chisel: 25mm. Specification Dimensions: 265 x 142 x 50mm.Weight: 1.4kg.

EUR 83.00
1

Teng TT3592 A/F Combination Spanner Set, 8 Piece

Teng TT3592 A/F Combination Spanner Set, 8 Piece

This Teng Tools 8 piece AF combination spanner set consists of spanners which have the same dimension at both ends. One end has an open head, and the other has a 12-point ring head, which is set at a 15 degree angle to increase ease of access to the fastening. The spanners are manufactured from chrome vanadium steel for strength and durability and have a satin finish and polished heads. Manufactured to DIN 3113A standards. Supplied in a handy storage tray. Contents: 8 x Combination Spanners 5/16, 3/8, 7/16, 1/2 , 9/16, 5/8, 11/16 and 3/4 AF. Specification Dimensions: 265 x 142 x 50mm.Weight: 1.0kg.

EUR 90.70
1

Teng T3835AF Socket Set of 35 A/F 3/8in Drive

Teng T3835AF Socket Set of 35 A/F 3/8in Drive

Teng Tools sockets are manufactured from strong chrome vanadium steel in accordance with ISO9000 and AS954. They provide excellent torque, whilst reducing the risk of rounding fasteners. The T3835AF 35 piece socket set contains short and long, six-point sockets in imperial AF sizes. The set also includes a fibre reinforced ratchet handle, universal joint, extension bars and a bit socket, adaptor, spark plug sockets, as well as 11 different bits. The tools and accessories are supplied in a red plastic box with a latch lock, folding handle and hinges with metal pins. The case is fitted with rubber feet to prevent it from sliding. This 35-piece set contains the following: 10 x 3/8in AF Hex Sockets 5/16, 3/8, 7/16, 1/2 , 9/16, 5/8, 11/16, 3/4, 13/16 & 7/8in.6 x 3/8in AF Hex Deep Sockets 3/8, 7/16, 1/2 , 9/16, 11/16 & 3/4in.2 x 3/8in Spark Plug Sockets 16 & 21mm.1 x 3/8in Reversible Ratchet, 1 x 3/8in Universal Joint.2 x 3/8in Extension Bars 100 & 150mm.1 x 3/8-1/2in Adaptor, 1 x 3/8-1/4in Hex Bit Adaptor.2 x 1/4in Slotted Bits: 4 & 5.5mm.2 x 1/4in Phillips Bits: PH1 & PH2.2 x 1/4in Pozidriv Bits: PZ1 & PZ2.2 x 1/4in Hex Bits: 5 & 6mm.3 x 1/4in TORX Bits: TX10, TX15 & TX20.

EUR 176.68
1

Teng TTMDQ49 Bit & Quick Chuck Driver Set, 49 Piece - 1/4in Drive

Teng TTMDQ49 Bit & Quick Chuck Driver Set, 49 Piece - 1/4in Drive

The Teng TTMDQ49 Bit & Quick Chuck Driver Set contains a selection of regular sockets, as well as a comprehensive range of bits together with the Quick Chuck Handle Driver and 1/4in Drive Ratchet Head Adaptor. Supplied in the unique Teng Tools TC tray for use on its own or as part of the Teng Tools Tool Control System. Contents: 3 x 25mm Phillips Bits: PH1, PH2 and PH33 x 25mm Pozidriv Bits: PZ1, PZ2 and PZ33 x 25mm Slotted Bits: 3.5, 5.5 and 8mm6 x 25mm TORX Bits: TX10, TX15, TX20, TX25, TX30 and TX403 x 25mm TORX Security Bits: TTX20, TTX25 and TTX306 x 25mm Hex Bits: 2, 3, 4, 5, 6 and 8mm3 x 25mm Robertson Bits: 1, 2 and 3 2 x 89mm Phillips Bits: PH1 and PH21 x 89mm Pozidriv Bit: PZ23 x 89mm TORX Bits: TX10, TX20 and TX251 x 89mm Slotted Bit: 4mm1 x 89mm Hex Bit: 4mm 11 x 1/4in Drive Sockets: 4, 5, 5.5, 6, 7, 8, 9, 10, 11, 12 and 13mm 1 x 1/4in Drive Quick Chuck Driver 147mm1 x 1/4in Drive Ratchet Head Adaptor1 x 1/4in M:1/4in Hex Adaptor

EUR 100.78
1

Teng T1435AF Socket Set of 35 A/F 1/4in Drive

Teng T1435AF Socket Set of 35 A/F 1/4in Drive

Teng Tools sockets are manufactured from strong chrome vanadium steel in accordance with ISO9000 and AS954. They provide excellent torque, whilst reducing the risk of rounding fasteners. This T1435AF 1/4 inch drive AF socket set comprises 35 pieces, which are supplied in a plastic carry case with a snap lock and metal pin hinges. This 35-piece set comprises:1 x 1/4 inch square drive ratchet. 1 x Universal Joint. 1 x 2 inch Extension. 1 x 4 inch Extension. 1 x 3/8inch female x 1/4 inch male adaptor. 1 x T - Bar Adaptor. 3 x Hexagon Keys: 1.5mm, 2mm and 2.5mm. 9 x 1/4 inch drive AF regular sockets: 3/16 inch, 7/32 inch, 1/4 inch, 9/32 inch, 5/16 inch, 11/32 inch, 3/8 inch, 7/16 inch and 1/2inch.6 x 1/4 inch drive AF deep sockets: 3/16 inch, 1/4 inch, 5/16 inch, 3/8 inch, 7/16 inch and 1/2inch.3 x TORX screwdriver bits: TX10, TX15 and TX20. 2 x Hex screwdriver bits: 5mm and 6mm. 2 x Pozidriv screwdriver bits: PZ1 and PZ2.2 x Phillips screwdriver bits: PH1 and PH2. 2 x slotted screwdriver bits: 4mm and 5.5mm.

EUR 101.16
1

Teng Combination Spanner Set, 10 Piece

Teng Combination Spanner Set, 10 Piece

This Teng Tools 10 piece combination spanner set consists of spanners which have the same dimension at both ends. One end has an open head, and the other has a 12-point ring head, which is set at a 15° angle to increase ease of access to the fastening. The spanners are manufactured from chrome vanadium steel for strength and durability and have a satin finish and polished heads. Manufactured to DIN 3113A standards. Supplied in a handy plastic holder, which is ideal for easy transportation, mounting to a wall or fixing on a workbench panel. The TEN6510A 10 piece set contains the following spanner sizes:8mm, 10mm, 11mm, 12mm, 13mm, 14mm, 15mm, 16mm, 17mm and 19mm.

EUR 90.88
1

Teng TT1236 Metric Combination Spanner Set, 12 Piece

Teng TT1236 Metric Combination Spanner Set, 12 Piece

This Teng Tools 12 piece combination spanner set consists of spanners which have the same dimension at both ends. One end has an open head, and the other has a 12-point ring head, which is set at a 15 degree angle to increase ease of access to the fastening. The spanners are manufactured from chrome vanadium steel for strength and durability and have a satin finish and polished heads. Manufactured to DIN 3113A standards. The TENTT1236 12 piece set contains the following spanner sizes:8mm, 9mm, 10mm, 11mm, 12mm, 13mm, 14mm, 15mm, 16mm, 17mm, 18mm and 19mm. Supplied in a handy storage tray

EUR 84.10
1

Teng TTHP08 Hook & Pin Wrench Set, 8 Piece

Teng TTHP08 Hook & Pin Wrench Set, 8 Piece

These Teng Tools wrenches are made from strong chrome vanadium steel. The set consists of 3 hook spanners, with 3 pin adaptors and 2 spare pins. Ideal for use to work on locking nuts which have a series of notches cut in their outer surface. The hook/pin is placed in one of the notches and the handle turned to loosen or tighten the nut. The wrenches are supplied in a handy storage tray with a removable lid and dove tail joints. Suitable for use on its own, or as part of the Teng Tools TC control system. The TTP08 8-piece set contains the following: 3 x Hook handles: 3/4in to 2in, 1.1/4in to 3in and 2in to 4.3/4in. 3 x Pin adaptors: 4mm, 5mm and 6mm. 2 x Spare pins: 6 and 8mm.

EUR 175.00
1

Teng Speed Brace 3/8in Drive

Teng Speed Brace 3/8in Drive

This Teng Tools Speed Brace has a crank-shaped handle used to drive sockets. It is ideally used instead of a ratchet in situations when a lot of turning (i.e., a lot of fasteners) is needed, where it can save substantial time. The speed brace requires ample room to swing the handle and ample access to the fastener heads. Also it can be used occasionally in automotive repair or job shop work.This Speed Brace has a 3/8in square drive. It is manufactured from chrome vanadium steel for strength and durability, and has a satin chrome finish. For comfortable grip, the speed brace has a plastic handle. Specifications: Length: 380mm (15 in).Drive: 3/8 in.Weight: 310g.  

EUR 28.50
1

Teng 1492AG-E Torque Wrench 1/4in Drive 5-25Nm

Teng 1492AG-E Torque Wrench 1/4in Drive 5-25Nm

This Teng Tools Torque Wrench is manufactured according to DIN 3122 standards. With a ratchet head, the torque wrench can be used for both tightening and final checking of the torque. It is reversible with its lever but only for right hand action when torque checking. The wrench is equipped with an angular gauge for after the tightening. It is graduated in both Nm and ft.lb, and has a degree scale for after the tightening of cylinder heads. The ratchet head has a satin finish and, for comfort and excellent grip, the wrench has a rubber handle. Specifications: Accuracy: ± 4%.Torque range: 5 to 25nm / 4 to 18 ft.lb.Length : 277mm (11in).Weight: 797g.

EUR 93.60
1

Teng TM111 Tool Set of 111 Metric & AF 1/4in 3/8in & 1/2in Drive

Teng TM111 Tool Set of 111 Metric & AF 1/4in 3/8in & 1/2in Drive

The Teng 111 piece Socket Set contains 1/4 inch, 3/8 inch and 1/2 inch drive regular sockets and accessories, 3/8 inch drive deep sockets, spark plug sockets as well as ¼ inch and 5/16 inch hex bits.The set comes supplied in a plastic carrying case with a latch lid, a retractable handle specifically designed for comfort and durability. It has hard wearing hinges with metal pins for extended life and rubber feet to prevent the set from sliding, and also to protect it from scratching.        

EUR 621.03
1

Teng Metric Hexagon Key Set, 9 Piece

Teng Metric Hexagon Key Set, 9 Piece

This Teng Tools 9 piece set of hexagon keys is supplied in a handy folding plastic holder for easy storage. The keys are made from chrome vanadium steel for strength and durability. They have a long arm which allows access to more difficult to reach places, and a short arm which ensures excellent torque and leverage. Colour: black. The Teng Tools TEN1479MMR Hex Key Set comprises the following key sizes: 1.5mm, 2mm, 2.5mm, 3mm, 4mm, 5mm, 6mm, 8mm and 10mm.

EUR 18.30
1

Teng TTX2032 Metric Combination Spanner Set, 7 Piece

Teng TTX2032 Metric Combination Spanner Set, 7 Piece

The Teng Tools Metric Combination Spanner Set consists of spanners which have the same dimension at both ends. One end has an open head, and the other has a 12-point ring head, which is set at a 15° angle to increase ease of access to the fastening. The spanners are manufactured from chrome vanadium steel for strength and durability and have a satin finish and polished heads. Supplied in a handy storage tray. Contents: 7 x Combination Spanners: 20, 21, 22, 24, 27, 30 and 32mm. Specification Dimensions : 560 x 110 x 60mm.Weight: 2.6kg.

EUR 156.08
1

Teng TTTX7 TX/TPX TORX T-Handle Screwdriver Set, 7 Piece

Teng TTTX7 TX/TPX TORX T-Handle Screwdriver Set, 7 Piece

This Teng Tools TORX keys with T handles, each have a short arm and a long arm. The short arm allows excellent leverage allowing easy tightening and loosening and also has a slot to work on tamperproof screws. The long arm allows access to more difficult to reach areas. The keys are made from Chrome Molybdenum alloy steel for extra strength. This 7 piece set of TORX keys for internal TX heads consists of the following sizes: 3 x 100mm TX/TPX keys (TX/TPX10, TX/TPX15 and TX/TPX20). 3 x 150mm TX/TPX keys (TX/TPX25, TX/TPX27 and TX/TPX30). 1 x 190mm TX/TPX key (TX/TPX40). Supplied in handy storage tray.

EUR 67.05
1

Teng MB461 Mega Bite Long Nose Pliers 150mm (6in)

Teng MB461 Mega Bite Long Nose Pliers 150mm (6in)

The Teng Tools Mega Bite range of Pliers have been designed to ensure the highest quality and optimum functionality. The overall length of the pliers gives a maximum leverage to suit the pliers function. These Teng Tools Long Nose Pliers have long, straight jaws with serrated grip surfaces and allow up to a 72 degree cutting angle. They are made from high Carbon Steel, with Titanium coated joints for excellent strength and durabililty. For a comfortable grip, the pliers have vinyl coated handles. The TENMB461 Mega Bite Long Nose Pliers have the following specifications: Length: 155mm (6 inch). Cutting capacity piano wire: 0.5mm.Cutting capacity Steel wire: 1.0mm.

EUR 29.60
1

Teng Mega Bite Heavy-Duty Side Cut Pliers 200mm (8in)

Teng Mega Bite Heavy-Duty Side Cut Pliers 200mm (8in)

The Teng Tools Mega Bite range of Pliers have been designed to ensure the highest quality and optimum functionality. The overall length of the pliers gives a maximum leverage to suit the pliers function. These Teng Tools Side Cutting Pliers are suitable for heavy-duty applications and allow up to a 72 degree cutting angle. They are manufactured from high carbon steel, with Titanium coated joints for excellent strength and durability. For a comfortable grip, the pliers have Vinyl-coated handles. The TENMB442 Mega Bite Side Cutting Pliers have the following specifications:Length: 200mm (8 inch).Cutting capacity piano wire: 2.5mm.Cutting capacity Steel wire: 4.0mm.

EUR 35.70
1