18 resultater (0,16815 sekunder)

Vis alle filtre

Merke

Butikk

Pris (EUR)

Vis alle

Nullstill filter

Produkter
Fra
Butikker

ABB Latching relay e290-16-10/230 - Komponenter for switchboxes og skap

ABB Latching relay e290-16-10/230 - Komponenter for switchboxes og skap

Latching relays are electromagnetically operated devices. The E290 range from ABB can be used to realise a simple, energy saving and efficient lighting control system. These devices are mainly used in private houses, factory premises and commercial and public buildings as well as in industrial plants. As a rule, latching relays controlled by means of impulse buttons are installed where it is necessary for lighting to be operated from at least three different places. Each time a command is initiated (by means of an impulse button), an electrical pulse is applied to the coil of the latching relay. The coil in the device is briefly energised and activated. That short pulse to the coil leads to the mechanical latch of the internal main contacts. The internal switching mechanism enables us to achieve a safe and reliable interlock (in the same way as a ballpoint pen). Each pulse that is sent to the magnetic coil system switches the device to its previous position where it is held mechanically until the next control pulse is received. The devices are designed for rated currents 16 and 32A. Through the combinable accessories the main modules can be used in nearly all market applications.

NOK 460.00
1

ABB knx ip router mdrc ipr/s3.1.1 - Intelligente bygnings installasjoner

ABB knx ip router mdrc ipr/s3.1.1 - Intelligente bygnings installasjoner

ABB KNX IP router connects the KNX bus with the Ethernet network. The device uses the KNXnet/IP protocol for communication (Routing and Tunneling).It can be used as a fast line and area coupler. The full filter table for main groups 0-31 is supported.KNX devices can be programmed via the LAN using ETS. For this and further clients 5 Tunneling Server are available.DIN 90X36X64 mm (H x W x D)The IP address can be fixed or can be received from a DHCP server. Power supply via 12..30 V DC or PoE.The KNX Standard Communication (Multicast) can be switched off. In this case, up to 10 IPR/S3.1.1 can communicate using unicast communication.

NOK 7579.00
1

ABB Ms116-4.0 manual motor starter trip class 10a 2.5 - 4.0a - Komponenter for switchboxes og skap

ABB Ms116-4.0 manual motor starter trip class 10a 2.5 - 4.0a - Komponenter for switchboxes og skap

MS116-4.0 manual motor starter is a compact 45 mm width devices with a rated operational current of Ie = 4.0 A. This device is used to manually switch on and off motors and to protect them reliably and without the need for a fuse from short-circuits, overload and phase failures. The manual motor starter offers a rated service short-circuit breaking capacity Ics = 50 kA at 400 VAC and the trip class 10A. Further features are the build-in disconnect function, temperature compensation, trip-free mechanism and a rotary handle with a clear switch position indication. The manual motor starter is suitable for three- and single-phase applications. Auxiliary contacts, signalling contacts, undervoltage releases, shunt trips, 3-phase bus bars, power in-feed blocks and locking devices for protection against unauthorized changes are available as accessory.

NOK 669.00
1

ABB Ms116-6.3 manual motor starter trip class 10a 4.0 - 6.3a - Komponenter for switchboxes og skap

ABB Ms116-6.3 manual motor starter trip class 10a 4.0 - 6.3a - Komponenter for switchboxes og skap

MS116-6.3 manual motor starter is a compact 45 mm width devices with a rated operational current of Ie = 6.3 A. This device is used to manually switch on and off motors and to protect them reliably and without the need for a fuse from short-circuits, overload and phase failures. The manual motor starter offers a rated service short-circuit breaking capacity Ics = 50 kA at 400 VAC and the trip class 10A. Further features are the build-in disconnect function, temperature compensation, trip-free mechanism and a rotary handle with a clear switch position indication. The manual motor starter is suitable for three- and single-phase applications. Auxiliary contacts, signalling contacts, undervoltage releases, shunt trips, 3-phase bus bars, power in-feed blocks and locking devices for protection against unauthorized changes are available as accessory.

NOK 592.00
1

ABB Ms116-16 manual motor starter trip class 10a 10 - 16a - Komponenter for switchboxes og skap

ABB Ms116-16 manual motor starter trip class 10a 10 - 16a - Komponenter for switchboxes og skap

MS116-16 manual motor starter is a compact 45 mm width devices with a rated operational current of Ie = 16.0 A. This device is used to manually switch on and off motors and to protect them reliably and without the need for a fuse from short-circuits, overload and phase failures. The manual motor starter offers a rated service short-circuit breaking capacity Ics = 16 kA at 400 VAC and the trip class 10A. Further features are the build-in disconnect function, temperature compensation, trip-free mechanism and a rotary handle with a clear switch position indication. The manual motor starter is suitable for three- and single-phase applications. Auxiliary contacts, signalling contacts, undervoltage releases, shunt trips, 3-phase bus bars, power in-feed blocks and locking devices for protection against unauthorized changes are available as accessory.

NOK 693.00
1

ABB Ms116-1.6 manual motor starter trip class 10a 1.0 - 1.6a - Komponenter for switchboxes og skap

ABB Ms116-1.6 manual motor starter trip class 10a 1.0 - 1.6a - Komponenter for switchboxes og skap

MS116-1.6 manual motor starter is a compact 45 mm width devices with a rated operational current of Ie = 1.6 A. This device is used to manually switch on and off motors and to protect them reliably and without the need for a fuse from short-circuits, overload and phase failures. The manual motor starter offers a rated service short-circuit breaking capacity Ics = 50 kA at 400 VAC and the trip class 10A. Further features are the build-in disconnect function, temperature compensation, trip-free mechanism and a rotary handle with a clear switch position indication. The manual motor starter is suitable for three- and single-phase applications. Auxiliary contacts, signalling contacts, undervoltage releases, shunt trips, 3-phase bus bars, power in-feed blocks and locking devices for protection against unauthorized changes are available as accessory.

NOK 669.00
1

ABB Ms116-2.5 manual motor starter trip class 10a 1.6 - 2.5a - Komponenter for switchboxes og skap

ABB Ms116-2.5 manual motor starter trip class 10a 1.6 - 2.5a - Komponenter for switchboxes og skap

MS116-2.5 manual motor starter is a compact 45 mm width devices with a rated operational current of Ie = 2.5 A. This device is used to manually switch on and off motors and to protect them reliably and without the need for a fuse from short-circuits, overload and phase failures. The manual motor starter offers a rated service short-circuit breaking capacity Ics = 50 kA at 400 VAC and the trip class 10A. Further features are the build-in disconnect function, temperature compensation, trip-free mechanism and a rotary handle with a clear switch position indication. The manual motor starter is suitable for three- and single-phase applications. Auxiliary contacts, signalling contacts, undervoltage releases, shunt trips, 3-phase bus bars, power in-feed blocks and locking devices for protection against unauthorized changes are available as accessory.

NOK 592.00
1