26 resultater (0,17505 sekunder)

Vis alle filtre

Merke

Farge

Butikk

Pris (EUR)

Vis alle

Nullstill filter

Produkter
Fra
Butikker

Danfoss Cas145 pressure switch 4-40 bar g1/4 spdt ip67 - Varmekontroll

Danfoss Cas145 pressure switch 4-40 bar g1/4 spdt ip67 - Varmekontroll

In the CAS pressure switches series, special attention has been given to meeting demands for a high level of enclosure, low differential, robust, compact construction and resistance to shock and vibration. The CAS series covers most outdoor as well as indoor application requirements. CAS pressure switches are suitable for use in alarm and regulation systems in factories, diesel plant, compressors, power stations and on board ships. •Pressure ranges: 0 to 60 bar •Low differential (fixed) micro switch •Enclosure IP67. Sturdy and sea water resistant •Robust and compact construction •Resistance to shock and vibrations •Diaphragm version applications with: Pulsations/pressure peaks and seawater as media •Also available as differential pressure switch •Available with all relevant land and marine approvals

NOK 4318.00
1

Danfoss RA DV 15 UK valve body reverse angle - Radiatorer og ventiler

Danfoss RA DV 15 UK valve body reverse angle - Radiatorer og ventiler

The Danfoss Dynamic Valve is an innovative two-in-one radiator valve. It combines a thermostatic radiator valve for accurate temperature control with an automatic adjustment valve - all in the same valve. The built-in pressure difference regulator eliminates the pressure fluctuations in a 2-string heating system. The preset scale with 1-7+N is used to limit the maximum flow between 25-135 l/h. By using Dynamic Valve, a perfectly controlled and regulated heating system is achieved.

NOK 394.00
1

Danfoss RA-DV 15 valve housing side flow left - Radiatorer og ventiler

Danfoss RA-DV 15 valve housing side flow left - Radiatorer og ventiler

The Danfoss Dynamic Valve is an innovative two-in-one radiator valve. It combines a thermostatic radiator valve for accurate temperature control with an automatic adjustment valve - all in the same valve. The built-in pressure difference regulator eliminates the pressure fluctuations in a 2-string heating system. The preset scale with 1-7+N is used to limit the maximum flow between 25-135 l/h. By using Dynamic Valve, a perfectly controlled and regulated heating system is achieved.

NOK 435.00
1

Danfoss RA-DV 20 valve housing straight - Radiatorer og ventiler

Danfoss RA-DV 20 valve housing straight - Radiatorer og ventiler

The Danfoss Dynamic Valve is an innovative two-in-one radiator valve. It combines a thermostatic radiator valve for accurate temperature control with an automatic adjustment valve - all in the same valve. The built-in pressure difference regulator eliminates the pressure fluctuations in a 2-string heating system. The preset scale with 1-7+N is used to limit the maximum flow between 25-135 l/h. By using Dynamic Valve, a perfectly controlled and regulated heating system is achieved.

NOK 440.00
1

Danfoss RA-DV 15 valve housing side flow right - Radiatorer og ventiler

Danfoss RA-DV 15 valve housing side flow right - Radiatorer og ventiler

The Danfoss Dynamic Valve is an innovative two-in-one radiator valve. It combines a thermostatic radiator valve for accurate temperature control with an automatic adjustment valve - all in the same valve. The built-in pressure difference regulator eliminates the pressure fluctuations in a 2-string heating system. The preset scale with 1-7+N is used to limit the maximum flow between 25-135 l/h. By using Dynamic Valve, a perfectly controlled and regulated heating system is achieved.

NOK 437.00
1

Danfoss Mbc 5100 block-type compact pressure switches - Behandle instrumentering

Danfoss Mbc 5100 block-type compact pressure switches - Behandle instrumentering

MBC pressure switches are used in marine applications where space and reliability are the most important features. MBCs are compact pressure switches, designed according to our new block design to survive in the harsh conditions known from machine rooms onboard ships.MBCs have high vibration resistance and feature all commonly marine approvals. The fixed, but low differential guarantees accurate monitoring of critical pressures. MBV test valves can be delivered as standard option for MBC pressure switches. •All relevant marine approvals •Pressure ranges: -0.2 to 400 bar •Low differential (fixed) micro switch •Resistant to shock and vibrations •Enclosure IP65 •Diaphragm version for applications with pulsations/pressure peaks •Compact design •Low installations costs •Fast and easy to operate •Easy to mount on block test valve •Available as differential pressure switch

NOK 2486.00
1

Danfoss Cas 180 thermostat - Varmekontroll

Danfoss Cas 180 thermostat - Varmekontroll

In the CAS thermostats series, special attention has been given to meeting demands for a high level of enclosure, robust, compact construction and resistance to shock and vibration.The CAS series covers most outdoor as well as indoor application requirements. CAS thermostats are suitable for use in alarm and monitoring systems in factories, diesel plant, compressors, power stations and on board ships. •Temperature ranges: 20°C to 150°C •Low differential (fixed) micro switch •Enclosure IP67. Sturdy and sea water resistant •Robust and compact construction •Resistance to shock and vibrations •Available with all relevant land and marine approvals •Available as 2-step thermostats (see CAS 2-step)

NOK 4339.00
1

Danfoss Icon Master Controller OTA 24V with 10 channels - Gulvvarme

Danfoss Icon Master Controller OTA 24V with 10 channels - Gulvvarme

Danfoss Icon Master Controller 24V with 10 channels. Underfloor heating control for the Danfoss Icon series with 10 outputs for thermal actuators. Up to 10 room thermostats, wireless/wired, can be registered. The Master Controller must be combined with the Danfoss Icon radio module if wireless room thermostats are to be registered. Automatic balancing, active pump relay, function test and potential-free boiler relay are standard. It is possible to purchase the Danfoss Icon app-module which provides access to app-control of the underfloor heating system via an iOS or Android device. The app-module also provides access to online updating of the Master Controller firmware (OTA). Cooling control and demand-controlled flow temperature can be purchased using the Danfoss Icon expansion module. The Master Controller is compatible with Zigbee 3.0 systems such as Danfoss Ally or 3rd party Zigbee systems. For Zigbee integration, the Danfoss Icon Zigbee module is used, which is connected to the Master Controller's app input.

NOK 2907.00
1

Danfoss Icon Master Controller OTA 24v with 15 channels - Gulvvarme

Danfoss Icon Master Controller OTA 24v with 15 channels - Gulvvarme

Danfoss Icon Master Controller 24V with 15 channels. Underfloor heating control for the Danfoss Icon series with 15 outputs for thermal actuators. Up to 15 room thermostats, wireless/wired, can be registered. The Master Controller must be combined with the Danfoss Icon radio module if wireless room thermostats are to be registered. Automatic balancing, active pump relay, function test and potential-free boiler relay are standard. It is possible to purchase the Danfoss Icon app-module which provides access to app-control of the underfloor heating system via an iOS or Android device. The app-module also provides access to online updating of the Master Controller firmware (OTA). Cooling control and demand-controlled flow temperature can be purchased using the Danfoss Icon expansion module. The Master Controller is compatible with Zigbee 3.0 systems such as Danfoss Ally or 3rd party Zigbee systems. For Zigbee integration, the Danfoss Icon Zigbee module is used, which is connected to the Master Controller's app input.

NOK 3053.00
1

Danfoss floor heating manifold 8+8 SSM - Gulvvarme

Danfoss floor heating manifold 8+8 SSM - Gulvvarme

Danfoss SSM underfloor heating manifold in stainless steel with output for 8 heating circuits. SSM floor heating manifolds are equipped with integrated vents and filling/draining function on both flow and return manifold. Manifold SSM is used for heat control in underfloor heating systems. Each hose in the underfloor heating system is connected to the manifold, which makes it possible to regulate the heat supply to all rooms in the building independently. The manifold consists of a flow manifold and a return manifold. The flow manifold allows you to close each circuit independently. The manifold is without a built-in flowmeter. The return manifold is equipped with Danfoss' preset valves, which ensures optimal water balance in the system. The manifold valves can be controlled electronically using thermo actuators. The manifold is available in modules from 2-12 heating circuits. In addition, there are fittings that allow the manifolds to be combined in series - up to a maximum of 16 heating circuits. Ball valves are offered as an option for shutdown between the manifold and the rest of the system.

NOK 3967.00
1

Danfoss floor heating manifold 12+12 SSM with flowmeter - Gulvvarme

Danfoss floor heating manifold 12+12 SSM with flowmeter - Gulvvarme

Danfoss SSM underfloor heating manifold in stainless steel with output for 12 heating circuits and flow meters. SSM floor heating manifolds are equipped with integrated vents and filling/draining function on both flow and return manifold. Manifold SSM is used for heat control in underfloor heating systems. Each hose in the underfloor heating system is connected to the manifold, which makes it possible to regulate the heat supply to all rooms in the building independently. The manifold consists of a flow manifold and a return manifold. The flow manifold allows you to close each circuit independently. The manifold is with a built-in flowmeter. The return manifold is equipped with Danfoss' preset valves, which ensures optimal water balance in the system. The manifold valves can be controlled electronically using thermo actuators. The manifold is available in modules from 2-12 heating circuits. In addition, there are fittings that allow the manifolds to be combined in series - up to a maximum of 16 heating circuits. Ball valves are offered as an option for shutdown between the manifold and the rest of the system.

NOK 8469.00
1

Danfoss floor heating manifold 5+5 SSM - Gulvvarme

Danfoss floor heating manifold 5+5 SSM - Gulvvarme

Danfoss SSM underfloor heating manifold in stainless steel with output for 5 heating circuits. SSM floor heating manifolds are equipped with integrated vents and filling/draining function on both flow and return manifold. Manifold SSM is used for heat control in underfloor heating systems. Each hose in the underfloor heating system is connected to the manifold, which makes it possible to regulate the heat supply to all rooms in the building independently. The manifold consists of a flow manifold and a return manifold. The flow manifold allows you to close each circuit independently. The manifold is without a built-in flowmeter. The return manifold is equipped with Danfoss' preset valves, which ensures optimal water balance in the system. The manifold valves can be controlled electronically using thermo actuators. The manifold is available in modules from 2-12 heating circuits. In addition, there are fittings that allow the manifolds to be combined in series - up to a maximum of 16 heating circuits. Ball valves are offered as an option for shutdown between the manifold and the rest of the system.

NOK 2622.00
1

Danfoss floor heating manifold 4+4 SSM - Gulvvarme

Danfoss floor heating manifold 4+4 SSM - Gulvvarme

Danfoss SSM underfloor heating manifold in stainless steel with output for 4 heating circuits. SSM floor heating manifolds are equipped with integrated vents and filling/draining function on both flow and return manifold. Manifold SSM is used for heat control in underfloor heating systems. Each hose in the underfloor heating system is connected to the manifold, which makes it possible to regulate the heat supply to all rooms in the building independently. The manifold consists of a flow manifold and a return manifold. The flow manifold allows you to close each circuit independently. The manifold is without a built-in flowmeter. The return manifold is equipped with Danfoss' preset valves, which ensures optimal water balance in the system. The manifold valves can be controlled electronically using thermo actuators. The manifold is available in modules from 2-12 heating circuits. In addition, there are fittings that allow the manifolds to be combined in series - up to a maximum of 16 heating circuits. Ball valves are offered as an option for shutdown between the manifold and the rest of the system.

NOK 2184.00
1

Danfoss floor heating manifold 11+11 SSM - Gulvvarme

Danfoss floor heating manifold 11+11 SSM - Gulvvarme

Danfoss SSM underfloor heating manifold in stainless steel with output for 11 heating circuits. SSM floor heating manifolds are equipped with integrated vents and filling/draining function on both flow and return manifold. Manifold SSM is used for heat control in underfloor heating systems. Each hose in the underfloor heating system is connected to the manifold, which makes it possible to regulate the heat supply to all rooms in the building independently. The manifold consists of a flow manifold and a return manifold. The flow manifold allows you to close each circuit independently. The manifold is without a built-in flowmeter. The return manifold is equipped with Danfoss' preset valves, which ensures optimal water balance in the system. The manifold valves can be controlled electronically using thermo actuators. The manifold is available in modules from 2-12 heating circuits. In addition, there are fittings that allow the manifolds to be combined in series - up to a maximum of 16 heating circuits. Ball valves are offered as an option for shutdown between the manifold and the rest of the system.

NOK 5545.00
1

Danfoss floor heating manifold 10+10 SSM - Gulvvarme

Danfoss floor heating manifold 10+10 SSM - Gulvvarme

Danfoss SSM underfloor heating manifold in stainless steel with output for 10 heating circuits. SSM floor heating manifolds are equipped with integrated vents and filling/draining function on both flow and return manifold. Manifold SSM is used for heat control in underfloor heating systems. Each hose in the underfloor heating system is connected to the manifold, which makes it possible to regulate the heat supply to all rooms in the building independently. The manifold consists of a flow manifold and a return manifold. The flow manifold allows you to close each circuit independently. The manifold is without a built-in flowmeter. The return manifold is equipped with Danfoss' preset valves, which ensures optimal water balance in the system. The manifold valves can be controlled electronically using thermo actuators. The manifold is available in modules from 2-12 heating circuits. In addition, there are fittings that allow the manifolds to be combined in series - up to a maximum of 16 heating circuits. Ball valves are offered as an option for shutdown between the manifold and the rest of the system.

NOK 5064.00
1

Danfoss floor heating manifold 12+12 SSM - Gulvvarme

Danfoss floor heating manifold 12+12 SSM - Gulvvarme

Danfoss SSM underfloor heating manifold in stainless steel with output for 12 heating circuits. SSM floor heating manifolds are equipped with integrated vents and filling/draining function on both flow and return manifold. Manifold SSM is used for heat control in underfloor heating systems. Each hose in the underfloor heating system is connected to the manifold, which makes it possible to regulate the heat supply to all rooms in the building independently. The manifold consists of a flow manifold and a return manifold. The flow manifold allows you to close each circuit independently. The manifold is without a built-in flowmeter. The return manifold is equipped with Danfoss' preset valves, which ensures optimal water balance in the system. The manifold valves can be controlled electronically using thermo actuators. The manifold is available in modules from 2-12 heating circuits. In addition, there are fittings that allow the manifolds to be combined in series - up to a maximum of 16 heating circuits. Ball valves are offered as an option for shutdown between the manifold and the rest of the system.

NOK 5884.00
1

Danfoss floor heating manifold 9+9 SSM - Gulvvarme

Danfoss floor heating manifold 9+9 SSM - Gulvvarme

Danfoss SSM underfloor heating manifold in stainless steel with output for 9 heating circuits. SSM floor heating manifolds are equipped with integrated vents and filling/draining function on both flow and return manifold. Manifold SSM is used for heat control in underfloor heating systems. Each hose in the underfloor heating system is connected to the manifold, which makes it possible to regulate the heat supply to all rooms in the building independently. The manifold consists of a flow manifold and a return manifold. The flow manifold allows you to close each circuit independently. The manifold is without a built-in flowmeter. The return manifold is equipped with Danfoss' preset valves, which ensures optimal water balance in the system. The manifold valves can be controlled electronically using thermo actuators. The manifold is available in modules from 2-12 heating circuits. In addition, there are fittings that allow the manifolds to be combined in series - up to a maximum of 16 heating circuits. Ball valves are offered as an option for shutdown between the manifold and the rest of the system.

NOK 4523.00
1

Danfoss floor heating manifold 7+7 SSM - Gulvvarme

Danfoss floor heating manifold 7+7 SSM - Gulvvarme

Danfoss SSM underfloor heating manifold in stainless steel with output for 7 heating circuits. SSM floor heating manifolds are equipped with integrated vents and filling/draining function on both flow and return manifold. Manifold SSM is used for heat control in underfloor heating systems. Each hose in the underfloor heating system is connected to the manifold, which makes it possible to regulate the heat supply to all rooms in the building independently. The manifold consists of a flow manifold and a return manifold. The flow manifold allows you to close each circuit independently. The manifold is without a built-in flowmeter. The return manifold is equipped with Danfoss' preset valves, which ensures optimal water balance in the system. The manifold valves can be controlled electronically using thermo actuators. The manifold is available in modules from 2-12 heating circuits. In addition, there are fittings that allow the manifolds to be combined in series - up to a maximum of 16 heating circuits. Ball valves are offered as an option for shutdown between the manifold and the rest of the system.

NOK 3517.00
1

Danfoss floor heating manifold 6+6 SSM - Gulvvarme

Danfoss floor heating manifold 6+6 SSM - Gulvvarme

Danfoss SSM underfloor heating manifold in stainless steel with output for 6 heating circuits. SSM floor heating manifolds are equipped with integrated vents and filling/draining function on both flow and return manifold. Manifold SSM is used for heat control in underfloor heating systems. Each hose in the underfloor heating system is connected to the manifold, which makes it possible to regulate the heat supply to all rooms in the building independently. The manifold consists of a flow manifold and a return manifold. The flow manifold allows you to close each circuit independently. The manifold is without a built-in flowmeter. The return manifold is equipped with Danfoss' preset valves, which ensures optimal water balance in the system. The manifold valves can be controlled electronically using thermo actuators. The manifold is available in modules from 2-12 heating circuits. In addition, there are fittings that allow the manifolds to be combined in series - up to a maximum of 16 heating circuits. Ball valves are offered as an option for shutdown between the manifold and the rest of the system.

NOK 3074.00
1

Danfoss floor heating manifold 11+11 SSM with flowmeter - Gulvvarme

Danfoss floor heating manifold 11+11 SSM with flowmeter - Gulvvarme

Danfoss SSM underfloor heating manifold in stainless steel with output for 11 heating circuits and flow meters. SSM floor heating manifolds are equipped with integrated vents and filling/draining function on both flow and return manifold. Manifold SSM is used for heat control in underfloor heating systems. Each hose in the underfloor heating system is connected to the manifold, which makes it possible to regulate the heat supply to all rooms in the building independently. The manifold consists of a flow manifold and a return manifold. The flow manifold allows you to close each circuit independently. The manifold is with a built-in flowmeter. The return manifold is equipped with Danfoss' preset valves, which ensures optimal water balance in the system. The manifold valves can be controlled electronically using thermo actuators. The manifold is available in modules from 2-12 heating circuits. In addition, there are fittings that allow the manifolds to be combined in series - up to a maximum of 16 heating circuits. Ball valves are offered as an option for shutdown between the manifold and the rest of the system.

NOK 7817.00
1

Danfoss floor heating manifold 2+2 SSM - Gulvvarme

Danfoss floor heating manifold 2+2 SSM - Gulvvarme

Danfoss SSM underfloor heating manifold in stainless steel with output for 2 heating circuits. SSM floor heating manifolds are equipped with integrated vents and filling/draining function on both flow and return manifold. Manifold SSM is used for heat control in underfloor heating systems. Each hose in the underfloor heating system is connected to the manifold, which makes it possible to regulate the heat supply to all rooms in the building independently. The manifold consists of a flow manifold and a return manifold. The flow manifold allows you to close each circuit independently. The manifold is without a built-in flowmeter. The return manifold is equipped with Danfoss' preset valves, which ensures optimal water balance in the system. The manifold valves can be controlled electronically using thermo actuators. The manifold is available in modules from 2-12 heating circuits. In addition, there are fittings that allow the manifolds to be combined in series - up to a maximum of 16 heating circuits. Ball valves are offered as an option for shutdown between the manifold and the rest of the system.

NOK 1663.00
1