168 resultater (0,25764 sekunder)

Vis alle filtre

Merke

Farge

Vis alle

Butikk

Pris (EUR)

Vis alle

Nullstill filter

Produkter
Fra
Butikker

Danfoss RA-DV 20 valve housing straight - Radiatorer og ventiler

Danfoss RA-DV 20 valve housing straight - Radiatorer og ventiler

The Danfoss Dynamic Valve is an innovative two-in-one radiator valve. It combines a thermostatic radiator valve for accurate temperature control with an automatic adjustment valve - all in the same valve. The built-in pressure difference regulator eliminates the pressure fluctuations in a 2-string heating system. The preset scale with 1-7+N is used to limit the maximum flow between 25-135 l/h. By using Dynamic Valve, a perfectly controlled and regulated heating system is achieved.

NOK 431.00
1

Danfoss RA DV 15 UK valve body reverse angle - Radiatorer og ventiler

Danfoss RA DV 15 UK valve body reverse angle - Radiatorer og ventiler

The Danfoss Dynamic Valve is an innovative two-in-one radiator valve. It combines a thermostatic radiator valve for accurate temperature control with an automatic adjustment valve - all in the same valve. The built-in pressure difference regulator eliminates the pressure fluctuations in a 2-string heating system. The preset scale with 1-7+N is used to limit the maximum flow between 25-135 l/h. By using Dynamic Valve, a perfectly controlled and regulated heating system is achieved.

NOK 400.00
1

Danfoss RA-DV 15 valve housing side flow left - Radiatorer og ventiler

Danfoss RA-DV 15 valve housing side flow left - Radiatorer og ventiler

The Danfoss Dynamic Valve is an innovative two-in-one radiator valve. It combines a thermostatic radiator valve for accurate temperature control with an automatic adjustment valve - all in the same valve. The built-in pressure difference regulator eliminates the pressure fluctuations in a 2-string heating system. The preset scale with 1-7+N is used to limit the maximum flow between 25-135 l/h. By using Dynamic Valve, a perfectly controlled and regulated heating system is achieved.

NOK 437.00
1

Danfoss RA-DV 15 valve housing side flow right - Radiatorer og ventiler

Danfoss RA-DV 15 valve housing side flow right - Radiatorer og ventiler

The Danfoss Dynamic Valve is an innovative two-in-one radiator valve. It combines a thermostatic radiator valve for accurate temperature control with an automatic adjustment valve - all in the same valve. The built-in pressure difference regulator eliminates the pressure fluctuations in a 2-string heating system. The preset scale with 1-7+N is used to limit the maximum flow between 25-135 l/h. By using Dynamic Valve, a perfectly controlled and regulated heating system is achieved.

NOK 437.00
1

Danfoss Devireg 330 -10 / +10 c din rail thermostat - Komponenter for switchboxes og skap

Danfoss Devireg 330 -10 / +10 c din rail thermostat - Komponenter for switchboxes og skap

DEVIreg TM 330 is a series of simple electronic thermostats for installation in cabinets withDIN rail bracket. To measure and control the desired temperature, either one must be usedwiring sensor (in the kit) or an external or space sensor. The thermostat must be installedafter a multi-pole switch. It has an LED indicator that shows standby periods (green light) andheating periods (red light).DEVIreg TM 330 has a relay with two contact pairs - NO (normally open) and NC (normally closed) andis intended to be used for heating and cooling systems. In addition, the NO and NC contact pairsnot supplied by a voltage source inside the thermostats and can be used forcontrol systems with any voltage up to 250 V.The series is designed with thermostats in three temperature ranges.DEVIreg TM 330 (-10 - +10 ° C) is primarily used to control a lower temperature range such asantifreeze. This thermostat has a knob for adjusting the temperature setting with a scalefrom -10 to +10 ° C. Special outdoor wire with white wire, 2,5m, is included in a set.

NOK 1715.00
1

Danfoss Connection kit to the cold cable - Kabler og ledninger

Danfoss Connection kit to the cold cable - Kabler og ledninger

DEVIcrimpTMconnectionsset forcable / cold cableself-limitingheating cables• 1 piece. 2cm shrink tubing12/3 MC225KT black• 1 piece. shrink tubing 19/5black with glue• 3 pieces. ritteitte m.shrink tube 1.5-2.5mm2• 2 pcs. 1.5cm shrink tubing4/1 IAKT black with glue• 1 piece. 2.5 cm shrink tubing12/3 MC225KT blackm-glue• 1 piece. 10 cm shrink tubingECC 3/4 Gender• 1 piece. 10 cm hot melt adhesiveTape 0.3 - 0.5x25mm• 1 piece. cable CU BLW0.248 R / m 0.30mm K-20.64

NOK 217.00
1

Danfoss Icon Master Controller OTA 24V with 10 channels - Gulvvarme

Danfoss Icon Master Controller OTA 24V with 10 channels - Gulvvarme

Danfoss Icon Master Controller 24V with 10 channels. Underfloor heating control for the Danfoss Icon series with 10 outputs for thermal actuators. Up to 10 room thermostats, wireless/wired, can be registered. The Master Controller must be combined with the Danfoss Icon radio module if wireless room thermostats are to be registered. Automatic balancing, active pump relay, function test and potential-free boiler relay are standard. It is possible to purchase the Danfoss Icon app-module which provides access to app-control of the underfloor heating system via an iOS or Android device. The app-module also provides access to online updating of the Master Controller firmware (OTA). Cooling control and demand-controlled flow temperature can be purchased using the Danfoss Icon expansion module. The Master Controller is compatible with Zigbee 3.0 systems such as Danfoss Ally or 3rd party Zigbee systems. For Zigbee integration, the Danfoss Icon Zigbee module is used, which is connected to the Master Controller's app input.

NOK 2886.00
1

Danfoss Icon Master Controller OTA 24v with 15 channels - Gulvvarme

Danfoss Icon Master Controller OTA 24v with 15 channels - Gulvvarme

Danfoss Icon Master Controller 24V with 15 channels. Underfloor heating control for the Danfoss Icon series with 15 outputs for thermal actuators. Up to 15 room thermostats, wireless/wired, can be registered. The Master Controller must be combined with the Danfoss Icon radio module if wireless room thermostats are to be registered. Automatic balancing, active pump relay, function test and potential-free boiler relay are standard. It is possible to purchase the Danfoss Icon app-module which provides access to app-control of the underfloor heating system via an iOS or Android device. The app-module also provides access to online updating of the Master Controller firmware (OTA). Cooling control and demand-controlled flow temperature can be purchased using the Danfoss Icon expansion module. The Master Controller is compatible with Zigbee 3.0 systems such as Danfoss Ally or 3rd party Zigbee systems. For Zigbee integration, the Danfoss Icon Zigbee module is used, which is connected to the Master Controller's app input.

NOK 3101.00
1

Danfoss floor heating manifold 8+8 SSM - Gulvvarme

Danfoss floor heating manifold 8+8 SSM - Gulvvarme

Danfoss SSM underfloor heating manifold in stainless steel with output for 8 heating circuits. SSM floor heating manifolds are equipped with integrated vents and filling/draining function on both flow and return manifold. Manifold SSM is used for heat control in underfloor heating systems. Each hose in the underfloor heating system is connected to the manifold, which makes it possible to regulate the heat supply to all rooms in the building independently. The manifold consists of a flow manifold and a return manifold. The flow manifold allows you to close each circuit independently. The manifold is without a built-in flowmeter. The return manifold is equipped with Danfoss' preset valves, which ensures optimal water balance in the system. The manifold valves can be controlled electronically using thermo actuators. The manifold is available in modules from 2-12 heating circuits. In addition, there are fittings that allow the manifolds to be combined in series - up to a maximum of 16 heating circuits. Ball valves are offered as an option for shutdown between the manifold and the rest of the system.

NOK 3967.00
1

Danfoss floor heating manifold 12+12 SSM with flowmeter - Gulvvarme

Danfoss floor heating manifold 12+12 SSM with flowmeter - Gulvvarme

Danfoss SSM underfloor heating manifold in stainless steel with output for 12 heating circuits and flow meters. SSM floor heating manifolds are equipped with integrated vents and filling/draining function on both flow and return manifold. Manifold SSM is used for heat control in underfloor heating systems. Each hose in the underfloor heating system is connected to the manifold, which makes it possible to regulate the heat supply to all rooms in the building independently. The manifold consists of a flow manifold and a return manifold. The flow manifold allows you to close each circuit independently. The manifold is with a built-in flowmeter. The return manifold is equipped with Danfoss' preset valves, which ensures optimal water balance in the system. The manifold valves can be controlled electronically using thermo actuators. The manifold is available in modules from 2-12 heating circuits. In addition, there are fittings that allow the manifolds to be combined in series - up to a maximum of 16 heating circuits. Ball valves are offered as an option for shutdown between the manifold and the rest of the system.

NOK 8469.00
1

Danfoss floor heating manifold 5+5 SSM - Gulvvarme

Danfoss floor heating manifold 5+5 SSM - Gulvvarme

Danfoss SSM underfloor heating manifold in stainless steel with output for 5 heating circuits. SSM floor heating manifolds are equipped with integrated vents and filling/draining function on both flow and return manifold. Manifold SSM is used for heat control in underfloor heating systems. Each hose in the underfloor heating system is connected to the manifold, which makes it possible to regulate the heat supply to all rooms in the building independently. The manifold consists of a flow manifold and a return manifold. The flow manifold allows you to close each circuit independently. The manifold is without a built-in flowmeter. The return manifold is equipped with Danfoss' preset valves, which ensures optimal water balance in the system. The manifold valves can be controlled electronically using thermo actuators. The manifold is available in modules from 2-12 heating circuits. In addition, there are fittings that allow the manifolds to be combined in series - up to a maximum of 16 heating circuits. Ball valves are offered as an option for shutdown between the manifold and the rest of the system.

NOK 2622.00
1

Danfoss floor heating manifold 4+4 SSM - Gulvvarme

Danfoss floor heating manifold 4+4 SSM - Gulvvarme

Danfoss SSM underfloor heating manifold in stainless steel with output for 4 heating circuits. SSM floor heating manifolds are equipped with integrated vents and filling/draining function on both flow and return manifold. Manifold SSM is used for heat control in underfloor heating systems. Each hose in the underfloor heating system is connected to the manifold, which makes it possible to regulate the heat supply to all rooms in the building independently. The manifold consists of a flow manifold and a return manifold. The flow manifold allows you to close each circuit independently. The manifold is without a built-in flowmeter. The return manifold is equipped with Danfoss' preset valves, which ensures optimal water balance in the system. The manifold valves can be controlled electronically using thermo actuators. The manifold is available in modules from 2-12 heating circuits. In addition, there are fittings that allow the manifolds to be combined in series - up to a maximum of 16 heating circuits. Ball valves are offered as an option for shutdown between the manifold and the rest of the system.

NOK 2184.00
1

Danfoss floor heating manifold 11+11 SSM - Gulvvarme

Danfoss floor heating manifold 11+11 SSM - Gulvvarme

Danfoss SSM underfloor heating manifold in stainless steel with output for 11 heating circuits. SSM floor heating manifolds are equipped with integrated vents and filling/draining function on both flow and return manifold. Manifold SSM is used for heat control in underfloor heating systems. Each hose in the underfloor heating system is connected to the manifold, which makes it possible to regulate the heat supply to all rooms in the building independently. The manifold consists of a flow manifold and a return manifold. The flow manifold allows you to close each circuit independently. The manifold is without a built-in flowmeter. The return manifold is equipped with Danfoss' preset valves, which ensures optimal water balance in the system. The manifold valves can be controlled electronically using thermo actuators. The manifold is available in modules from 2-12 heating circuits. In addition, there are fittings that allow the manifolds to be combined in series - up to a maximum of 16 heating circuits. Ball valves are offered as an option for shutdown between the manifold and the rest of the system.

NOK 5545.00
1

Danfoss floor heating manifold 10+10 SSM - Gulvvarme

Danfoss floor heating manifold 10+10 SSM - Gulvvarme

Danfoss SSM underfloor heating manifold in stainless steel with output for 10 heating circuits. SSM floor heating manifolds are equipped with integrated vents and filling/draining function on both flow and return manifold. Manifold SSM is used for heat control in underfloor heating systems. Each hose in the underfloor heating system is connected to the manifold, which makes it possible to regulate the heat supply to all rooms in the building independently. The manifold consists of a flow manifold and a return manifold. The flow manifold allows you to close each circuit independently. The manifold is without a built-in flowmeter. The return manifold is equipped with Danfoss' preset valves, which ensures optimal water balance in the system. The manifold valves can be controlled electronically using thermo actuators. The manifold is available in modules from 2-12 heating circuits. In addition, there are fittings that allow the manifolds to be combined in series - up to a maximum of 16 heating circuits. Ball valves are offered as an option for shutdown between the manifold and the rest of the system.

NOK 5064.00
1

Danfoss floor heating manifold 12+12 SSM - Gulvvarme

Danfoss floor heating manifold 12+12 SSM - Gulvvarme

Danfoss SSM underfloor heating manifold in stainless steel with output for 12 heating circuits. SSM floor heating manifolds are equipped with integrated vents and filling/draining function on both flow and return manifold. Manifold SSM is used for heat control in underfloor heating systems. Each hose in the underfloor heating system is connected to the manifold, which makes it possible to regulate the heat supply to all rooms in the building independently. The manifold consists of a flow manifold and a return manifold. The flow manifold allows you to close each circuit independently. The manifold is without a built-in flowmeter. The return manifold is equipped with Danfoss' preset valves, which ensures optimal water balance in the system. The manifold valves can be controlled electronically using thermo actuators. The manifold is available in modules from 2-12 heating circuits. In addition, there are fittings that allow the manifolds to be combined in series - up to a maximum of 16 heating circuits. Ball valves are offered as an option for shutdown between the manifold and the rest of the system.

NOK 5884.00
1

Danfoss floor heating manifold 9+9 SSM - Gulvvarme

Danfoss floor heating manifold 9+9 SSM - Gulvvarme

Danfoss SSM underfloor heating manifold in stainless steel with output for 9 heating circuits. SSM floor heating manifolds are equipped with integrated vents and filling/draining function on both flow and return manifold. Manifold SSM is used for heat control in underfloor heating systems. Each hose in the underfloor heating system is connected to the manifold, which makes it possible to regulate the heat supply to all rooms in the building independently. The manifold consists of a flow manifold and a return manifold. The flow manifold allows you to close each circuit independently. The manifold is without a built-in flowmeter. The return manifold is equipped with Danfoss' preset valves, which ensures optimal water balance in the system. The manifold valves can be controlled electronically using thermo actuators. The manifold is available in modules from 2-12 heating circuits. In addition, there are fittings that allow the manifolds to be combined in series - up to a maximum of 16 heating circuits. Ball valves are offered as an option for shutdown between the manifold and the rest of the system.

NOK 4523.00
1

Danfoss floor heating manifold 7+7 SSM - Gulvvarme

Danfoss floor heating manifold 7+7 SSM - Gulvvarme

Danfoss SSM underfloor heating manifold in stainless steel with output for 7 heating circuits. SSM floor heating manifolds are equipped with integrated vents and filling/draining function on both flow and return manifold. Manifold SSM is used for heat control in underfloor heating systems. Each hose in the underfloor heating system is connected to the manifold, which makes it possible to regulate the heat supply to all rooms in the building independently. The manifold consists of a flow manifold and a return manifold. The flow manifold allows you to close each circuit independently. The manifold is without a built-in flowmeter. The return manifold is equipped with Danfoss' preset valves, which ensures optimal water balance in the system. The manifold valves can be controlled electronically using thermo actuators. The manifold is available in modules from 2-12 heating circuits. In addition, there are fittings that allow the manifolds to be combined in series - up to a maximum of 16 heating circuits. Ball valves are offered as an option for shutdown between the manifold and the rest of the system.

NOK 3517.00
1

Danfoss floor heating manifold 6+6 SSM - Gulvvarme

Danfoss floor heating manifold 6+6 SSM - Gulvvarme

Danfoss SSM underfloor heating manifold in stainless steel with output for 6 heating circuits. SSM floor heating manifolds are equipped with integrated vents and filling/draining function on both flow and return manifold. Manifold SSM is used for heat control in underfloor heating systems. Each hose in the underfloor heating system is connected to the manifold, which makes it possible to regulate the heat supply to all rooms in the building independently. The manifold consists of a flow manifold and a return manifold. The flow manifold allows you to close each circuit independently. The manifold is without a built-in flowmeter. The return manifold is equipped with Danfoss' preset valves, which ensures optimal water balance in the system. The manifold valves can be controlled electronically using thermo actuators. The manifold is available in modules from 2-12 heating circuits. In addition, there are fittings that allow the manifolds to be combined in series - up to a maximum of 16 heating circuits. Ball valves are offered as an option for shutdown between the manifold and the rest of the system.

NOK 3074.00
1

Danfoss floor heating manifold 11+11 SSM with flowmeter - Gulvvarme

Danfoss floor heating manifold 11+11 SSM with flowmeter - Gulvvarme

Danfoss SSM underfloor heating manifold in stainless steel with output for 11 heating circuits and flow meters. SSM floor heating manifolds are equipped with integrated vents and filling/draining function on both flow and return manifold. Manifold SSM is used for heat control in underfloor heating systems. Each hose in the underfloor heating system is connected to the manifold, which makes it possible to regulate the heat supply to all rooms in the building independently. The manifold consists of a flow manifold and a return manifold. The flow manifold allows you to close each circuit independently. The manifold is with a built-in flowmeter. The return manifold is equipped with Danfoss' preset valves, which ensures optimal water balance in the system. The manifold valves can be controlled electronically using thermo actuators. The manifold is available in modules from 2-12 heating circuits. In addition, there are fittings that allow the manifolds to be combined in series - up to a maximum of 16 heating circuits. Ball valves are offered as an option for shutdown between the manifold and the rest of the system.

NOK 7817.00
1

Danfoss floor heating manifold 2+2 SSM - Gulvvarme

Danfoss floor heating manifold 2+2 SSM - Gulvvarme

Danfoss SSM underfloor heating manifold in stainless steel with output for 2 heating circuits. SSM floor heating manifolds are equipped with integrated vents and filling/draining function on both flow and return manifold. Manifold SSM is used for heat control in underfloor heating systems. Each hose in the underfloor heating system is connected to the manifold, which makes it possible to regulate the heat supply to all rooms in the building independently. The manifold consists of a flow manifold and a return manifold. The flow manifold allows you to close each circuit independently. The manifold is without a built-in flowmeter. The return manifold is equipped with Danfoss' preset valves, which ensures optimal water balance in the system. The manifold valves can be controlled electronically using thermo actuators. The manifold is available in modules from 2-12 heating circuits. In addition, there are fittings that allow the manifolds to be combined in series - up to a maximum of 16 heating circuits. Ball valves are offered as an option for shutdown between the manifold and the rest of the system.

NOK 1663.00
1

Danfoss Vlt fc51 micro drive 0.18kw ip20 132f0001 - Motorstyring

Danfoss Vlt fc51 micro drive 0.18kw ip20 132f0001 - Motorstyring

VLT® Micro Drive is an universal frequency converter for the control of AC-motors up to 22 kW. It is a small frequency converter with maximum power and operation reliability.VLT® Micro Drive is produced with respect for the environment and the unit meets the terms in the RoHS-directive. The perfect control for: industrial applications - HVAC-applications - OEM.Note!VLT® Micro Drive FC-51 is delivered without control panel and EMC decoupling kit. This must be ordered seperatly and is avaible in accessories.For Frame size M1, M2 and M3, please note that orders must be equal to 6, which is the amount in each industrialpackage.

NOK 2832.00
1