10 rezultate (0,13054 secunde)

Afișează toate filtrele

Comerciant

Preț (EUR)

Resetare filtru

Produse
De la
Magazine

Chauvet dj intimidator hybrid 140sr moving head beam spot wash

Chauvet dj intimidator hybrid 140sr moving head beam spot wash

Echipat cu o lampa cu descarcare de 140W functie SPOT, BEAM, WASH doua roti cu gobos-uri controlabile independent zoom motorizat ce functioneaza in toate functiile(Spot, Beam sau Wash) Aimentare intrare iesire PowerCON pentru inseriere usoara optica superioara din sticla de foarte buna calitate pentru proiectii bine definite si culori stralucitoare compatibil si cu lampi Osram 132 W Afisaj full-color comptibil cu telecomanda de control IRC-6, functia totem (caracteristica unica Chauvet) compatibil cu geanta Chauvet CHS-50 VIP functionare DMX in: 13 sau 19 canale, conexiune XLR 3 pini Pan Tilt: 540 270 Pan Tilt controlabil: 180 , 360 , 540 pan 90 , 180 , 270 tilt culori: 12 + white, split, scroll continuu la diferite viteze sursa de lumina: (inclusa): Osram Sirius HRI 140 W lampa cu descarcare (6000 ore); (optional): Osram Sirius HRI 132 W lampa cu descarcare (6000 ore) Strobe Rate: 0-20 Hz putere luminoasa: (3 beam): 382000 lux la 5 m; (7 spot): 104700 lux la 5 m; (14 wash): 4680 lux la 5 m inseriere putere:6 unitati la 230 V alimentare: 240 VAC, 50 60 Hz putere si consum: 254 W, 1.3 A la 230 V, 50 Hz dimensiuni gobo: (rotating): 13.7 mm exterior, 11 mm imagine, 1 mm max grosime unghi de deschidere si zoom: (beam): 3 -11 ; (spot): 7 -21 ; (wash): 14 -28 greutate: 15.2 kg dimensiuni: 322 x 220 x 513 mm gobo roata 1: 9 + open, rotative, interschimbabile, slot-n-lock, scroll continuu la diferite viteze gobo roata 2: 17 + open, metalice, croll continuu la diferite viteze controlabil optional: IRC-6

RON 6144.00
1

Chauvet dj intimidator hybrid 140sr moving head beam spot wash

Chauvet dj intimidator hybrid 140sr moving head beam spot wash

Echipat cu o lampa cu descarcare de 140W functie SPOT, BEAM, WASH doua roti cu gobos-uri controlabile independent zoom motorizat ce functioneaza in toate functiile(Spot, Beam sau Wash) Aimentare intrare iesire PowerCON pentru inseriere usoara optica superioara din sticla de foarte buna calitate pentru proiectii bine definite si culori stralucitoare compatibil si cu lampi Osram 132 W Afisaj full-color comptibil cu telecomanda de control IRC-6, functia totem (caracteristica unica Chauvet) compatibil cu geanta Chauvet CHS-50 VIP functionare DMX in: 13 sau 19 canale, conexiune XLR 3 pini Pan Tilt: 540 270 Pan Tilt controlabil: 180 , 360 , 540 pan 90 , 180 , 270 tilt culori: 12 + white, split, scroll continuu la diferite viteze sursa de lumina: (inclusa): Osram Sirius HRI 140 W lampa cu descarcare (6000 ore); (optional): Osram Sirius HRI 132 W lampa cu descarcare (6000 ore) Strobe Rate: 0-20 Hz putere luminoasa: (3 beam): 382000 lux la 5 m; (7 spot): 104700 lux la 5 m; (14 wash): 4680 lux la 5 m inseriere putere:6 unitati la 230 V alimentare: 240 VAC, 50 60 Hz putere si consum: 254 W, 1.3 A la 230 V, 50 Hz dimensiuni gobo: (rotating): 13.7 mm exterior, 11 mm imagine, 1 mm max grosime unghi de deschidere si zoom: (beam): 3 -11 ; (spot): 7 -21 ; (wash): 14 -28 greutate: 15.2 kg dimensiuni: 322 x 220 x 513 mm gobo roata 1: 9 + open, rotative, interschimbabile, slot-n-lock, scroll continuu la diferite viteze gobo roata 2: 17 + open, metalice, croll continuu la diferite viteze controlabil optional: IRC-6

RON 6144.00
1

Triton rack podea 19" 42u 800x1000 gri

Triton rack podea 19" 42u 800x1000 gri

Free-standing cabinet RMA N1 Welded cabinet with removable side panels and rear cover, IP20, load capacity 800 kg A universal cabinet for data and telecommunication purposes. Sufficient capacity for common applications, a large selection of sizes and options together with a wide selection of accessories and excellent development make it the best-selling cabinet in our range. Product details Rigid construction RMA has a robust welded construction. High quality workmanship and the newest technologies ensure a perfect look of the cabinet. The skeleton rails have a new shape, are wider and made of 1.3 mm thick material. Flexible door opening The hinge system allows the door to open 165°. The door can be easily removed and re-mounted to change the direction of opening. The double wing doors are equipped with hook-on hinges. Glass The metal doors with glued glass are made of 4 mm thick tempered safety glass, which is resistant to common impacts. When broken, it forms a number of small fragments like automotive glass. For safety reasons, we recommend closing the door after installing the equipment in the cabinet to prevent collision with other objects. Used glass is tested in a certified testing laboratory and meet the requirements of ČSN EN 12150-1+A: Glass in construction – Thermally tempered soda-lime-silicate safety glass. The tested glass meets the standard for the disintegration of glass after breakage, Certificate of Conformity CQ-24- 2023, Test Protocol IKATES 58A-2024.

RON 5386.00
1

Triton rack podea 19" 42u 800x1000 gri

Triton rack podea 19" 42u 800x1000 gri

Free-standing cabinet RMA N1 Welded cabinet with removable side panels and rear cover, IP20, load capacity 800 kg A universal cabinet for data and telecommunication purposes. Sufficient capacity for common applications, a large selection of sizes and options together with a wide selection of accessories and excellent development make it the best-selling cabinet in our range. Product details Rigid construction RMA has a robust welded construction. High quality workmanship and the newest technologies ensure a perfect look of the cabinet. The skeleton rails have a new shape, are wider and made of 1.3 mm thick material. Flexible door opening The hinge system allows the door to open 165°. The door can be easily removed and re-mounted to change the direction of opening. The double wing doors are equipped with hook-on hinges. Glass The metal doors with glued glass are made of 4 mm thick tempered safety glass, which is resistant to common impacts. When broken, it forms a number of small fragments like automotive glass. For safety reasons, we recommend closing the door after installing the equipment in the cabinet to prevent collision with other objects. Used glass is tested in a certified testing laboratory and meet the requirements of ČSN EN 12150-1+A: Glass in construction – Thermally tempered soda-lime-silicate safety glass. The tested glass meets the standard for the disintegration of glass after breakage, Certificate of Conformity CQ-24- 2023, Test Protocol IKATES 58A-2024.

RON 5386.00
1

Triton rack podea 19" 42u 600x1000 gri

Triton rack podea 19" 42u 600x1000 gri

Free-standing cabinet RMA N1 Welded cabinet with removable side panels and rear cover, IP20, load capacity 800 kg A universal cabinet for data and telecommunication purposes. Sufficient capacity for common applications, a large selection of sizes and options together with a wide selection of accessories and excellent development make it the best-selling cabinet in our range. Product details Rigid construction RMA has a robust welded construction. High quality workmanship and the newest technologies ensure a perfect look of the cabinet. The skeleton rails have a new shape, are wider and made of 1.3 mm thick material. Flexible door opening The hinge system allows the door to open 165°. The door can be easily removed and re-mounted to change the direction of opening. The double wing doors are equipped with hook-on hinges. Glass The metal doors with glued glass are made of 4 mm thick tempered safety glass, which is resistant to common impacts. When broken, it forms a number of small fragments like automotive glass. For safety reasons, we recommend closing the door after installing the equipment in the cabinet to prevent collision with other objects. Used glass is tested in a certified testing laboratory and meet the requirements of ČSN EN 12150-1+A: Glass in construction – Thermally tempered soda-lime-silicate safety glass. The tested glass meets the standard for the disintegration of glass after breakage, Certificate of Conformity CQ-24- 2023, Test Protocol IKATES 58A-2024.

RON 4804.00
1

Triton rack podea 19" 42u 600x1000 gri

Triton rack podea 19" 42u 600x1000 gri

Free-standing cabinet RMA N1 Welded cabinet with removable side panels and rear cover, IP20, load capacity 800 kg A universal cabinet for data and telecommunication purposes. Sufficient capacity for common applications, a large selection of sizes and options together with a wide selection of accessories and excellent development make it the best-selling cabinet in our range. Product details Rigid construction RMA has a robust welded construction. High quality workmanship and the newest technologies ensure a perfect look of the cabinet. The skeleton rails have a new shape, are wider and made of 1.3 mm thick material. Flexible door opening The hinge system allows the door to open 165°. The door can be easily removed and re-mounted to change the direction of opening. The double wing doors are equipped with hook-on hinges. Glass The metal doors with glued glass are made of 4 mm thick tempered safety glass, which is resistant to common impacts. When broken, it forms a number of small fragments like automotive glass. For safety reasons, we recommend closing the door after installing the equipment in the cabinet to prevent collision with other objects. Used glass is tested in a certified testing laboratory and meet the requirements of ČSN EN 12150-1+A: Glass in construction – Thermally tempered soda-lime-silicate safety glass. The tested glass meets the standard for the disintegration of glass after breakage, Certificate of Conformity CQ-24- 2023, Test Protocol IKATES 58A-2024.

RON 4804.00
1

Triton rack podea 22u 600x600 gri

Triton rack podea 22u 600x600 gri

Rigid construction RMA has a robust welded construction. High quality workmanship and the newest technologies ensure a perfect look of the cabinet. The skeleton rails have a new shape, are wider and made of 1.3 mm thick material. Flexible door opening The hinge system allows the door to open almost 180°. The door can be easily removed and re-mounted to change the direction of opening. The double wing doors are equipped with hook-on hinges. Tritón handles We manufacture our own handles for the free-standing cabinets. By replacing the plastic module (not included), a half-cylindrical lock insert can be fitted. Patent: PUV 2013-27443 Adjustable vertical rails Vertical 19” rails can be adjusted freely in any depth of the cabinet. This simplifies mounting of the device and configuration of cables. Removable side panels and rear cover RMA has a welded frame and removable side panels. These are fixed as standard to the frame using a lock with the same key as the door and rear cover. Door for fan units With this cabinet type, it is possible to order a special metal door ready for mounting RAx-CH-X0x-X3 fan units. Further information is available in the section Active cooling. Break-out blanking panels Entry openings for cables are covered with breakout-type blanking panels. To prevent dust penetration, cables can be sealed in the opening with a brush strip, or simply secure by a protective fringe edge (both supplied with the cabinet). Opening for a fan unit A large opening covered with a breakout-type blanking panel enables mounting and removal of the Triton fan unit from the outside of the cabinet without the need of using screws. Castors, levelling feet, base The cabinet can be placed on levelling feet (included) or, with optional equipment, on a base, castors or heavy-duty castors with reinforcing frame. Rear side of the cabinet There are two cable entries on the rear wall of the cabinet covered with breakout panels. One is at the top and the other at the bottom edge of the cover. The other cable entries are on the ceiling and in the base of the cabinet. Perforation of the skeleton The RMA cabinets have a perforated skeleton to provide cooling air access to the installed technology. Cooling can be supported by the installation of fan units. Bonding All detachable parts are bonded together according to the requirements of the relevant standard. Flex frame (valid for 800mm wide cabinets) The system allows the installation of sliding rails in 19”, 21” and 23” spans. Another option is to shift the 19” vertical rail spacing to one side to provide more space on the other side. Middle pair of vertical rails For enclosures deeper than 800 mm, a third pair of vertical rails for mounting the technology is supplied as standard. Thanks to their open profile, they do not restrict the installation of deeper equipment. Shorter devices can be mounted on the central vertical rail using different types of brackets (optional accessories). Wide skeleton rails

RON 2484.00
1

Triton rack podea 22u 600x600 gri

Triton rack podea 22u 600x600 gri

Rigid construction RMA has a robust welded construction. High quality workmanship and the newest technologies ensure a perfect look of the cabinet. The skeleton rails have a new shape, are wider and made of 1.3 mm thick material. Flexible door opening The hinge system allows the door to open almost 180°. The door can be easily removed and re-mounted to change the direction of opening. The double wing doors are equipped with hook-on hinges. Tritón handles We manufacture our own handles for the free-standing cabinets. By replacing the plastic module (not included), a half-cylindrical lock insert can be fitted. Patent: PUV 2013-27443 Adjustable vertical rails Vertical 19” rails can be adjusted freely in any depth of the cabinet. This simplifies mounting of the device and configuration of cables. Removable side panels and rear cover RMA has a welded frame and removable side panels. These are fixed as standard to the frame using a lock with the same key as the door and rear cover. Door for fan units With this cabinet type, it is possible to order a special metal door ready for mounting RAx-CH-X0x-X3 fan units. Further information is available in the section Active cooling. Break-out blanking panels Entry openings for cables are covered with breakout-type blanking panels. To prevent dust penetration, cables can be sealed in the opening with a brush strip, or simply secure by a protective fringe edge (both supplied with the cabinet). Opening for a fan unit A large opening covered with a breakout-type blanking panel enables mounting and removal of the Triton fan unit from the outside of the cabinet without the need of using screws. Castors, levelling feet, base The cabinet can be placed on levelling feet (included) or, with optional equipment, on a base, castors or heavy-duty castors with reinforcing frame. Rear side of the cabinet There are two cable entries on the rear wall of the cabinet covered with breakout panels. One is at the top and the other at the bottom edge of the cover. The other cable entries are on the ceiling and in the base of the cabinet. Perforation of the skeleton The RMA cabinets have a perforated skeleton to provide cooling air access to the installed technology. Cooling can be supported by the installation of fan units. Bonding All detachable parts are bonded together according to the requirements of the relevant standard. Flex frame (valid for 800mm wide cabinets) The system allows the installation of sliding rails in 19”, 21” and 23” spans. Another option is to shift the 19” vertical rail spacing to one side to provide more space on the other side. Middle pair of vertical rails For enclosures deeper than 800 mm, a third pair of vertical rails for mounting the technology is supplied as standard. Thanks to their open profile, they do not restrict the installation of deeper equipment. Shorter devices can be mounted on the central vertical rail using different types of brackets (optional accessories). Wide skeleton rails

RON 2483.00
1

Triton rack podea 19" 42u 600x800 negru

Triton rack podea 19" 42u 600x800 negru

Free-standing cabinet RMA N1 Welded cabinet with removable side panels and rear cover, IP20, load capacity 800 kg A universal cabinet for data and telecommunication purposes. Sufficient capacity for common applications, a large selection of sizes and options together with a wide selection of accessories and excellent development make it the best-selling cabinet in our range. Product details Rigid construction RMA has a robust welded construction. High quality workmanship and the newest technologies ensure a perfect look of the cabinet. The skeleton rails have a new shape, are wider and made of 1.3 mm thick material. Flexible door opening The hinge system allows the door to open 165°. The door can be easily removed and re-mounted to change the direction of opening. The double wing doors are equipped with hook-on hinges. Glass The metal doors with glued glass are made of 4 mm thick tempered safety glass, which is resistant to common impacts. When broken, it forms a number of small fragments like automotive glass. For safety reasons, we recommend closing the door after installing the equipment in the cabinet to prevent collision with other objects. Used glass is tested in a certified testing laboratory and meet the requirements of ČSN EN 12150-1+A: Glass in construction – Thermally tempered soda-lime-silicate safety glass. The tested glass meets the standard for the disintegration of glass after breakage, Certificate of Conformity CQ-24- 2023, Test Protocol IKATES 58A-2024. Adjustable vertical rails Vertical 19” rails can be adjusted freely in any depth of the cabinet. This simplifies mounting of the device and configuration of cables. Removable side panels and rear cover RMA has a welded frame and removable side panels. These are fixed as standard to the frame using a lock with the same key as the door and rear cover. Door for fan units With this cabinet type, it is possible to order a special metal door ready for mounting RAx-CH-X0x-X3 fan units. Further information is available in the section Active cooling. Break-out blanking panels Entry openings for cables are covered with breakout-type blanking panels. To prevent dust penetration, cables can be sealed in the opening with a brush strip, or simply secure by a protective fringe edge (both supplied with the cabinet). Opening for a fan unit A large opening covered with a breakout-type blanking panel enables mounting and removal of the Triton fan unit from the outside of the cabinet without the need of using screws. Castors, levelling feet, base The cabinet can be placed on levelling feet (included) or, with optional equipment, on a base, castors or heavy-duty castors with reinforcing frame. Rear side of the cabinet There are two cable entries on the rear wall of the cabinet covered with breakout panels. One is at the top and the other at the bottom edge of the cover. The other cable entries are on the ceiling and in the base of the cabinet. Perforation of the skeleton The RMA cabinets have a

RON 3822.00
1

Triton rack podea 19" 42u 600x800 negru

Triton rack podea 19" 42u 600x800 negru

Free-standing cabinet RMA N1 Welded cabinet with removable side panels and rear cover, IP20, load capacity 800 kg A universal cabinet for data and telecommunication purposes. Sufficient capacity for common applications, a large selection of sizes and options together with a wide selection of accessories and excellent development make it the best-selling cabinet in our range. Product details Rigid construction RMA has a robust welded construction. High quality workmanship and the newest technologies ensure a perfect look of the cabinet. The skeleton rails have a new shape, are wider and made of 1.3 mm thick material. Flexible door opening The hinge system allows the door to open 165°. The door can be easily removed and re-mounted to change the direction of opening. The double wing doors are equipped with hook-on hinges. Glass The metal doors with glued glass are made of 4 mm thick tempered safety glass, which is resistant to common impacts. When broken, it forms a number of small fragments like automotive glass. For safety reasons, we recommend closing the door after installing the equipment in the cabinet to prevent collision with other objects. Used glass is tested in a certified testing laboratory and meet the requirements of ČSN EN 12150-1+A: Glass in construction – Thermally tempered soda-lime-silicate safety glass. The tested glass meets the standard for the disintegration of glass after breakage, Certificate of Conformity CQ-24- 2023, Test Protocol IKATES 58A-2024. Adjustable vertical rails Vertical 19” rails can be adjusted freely in any depth of the cabinet. This simplifies mounting of the device and configuration of cables. Removable side panels and rear cover RMA has a welded frame and removable side panels. These are fixed as standard to the frame using a lock with the same key as the door and rear cover. Door for fan units With this cabinet type, it is possible to order a special metal door ready for mounting RAx-CH-X0x-X3 fan units. Further information is available in the section Active cooling. Break-out blanking panels Entry openings for cables are covered with breakout-type blanking panels. To prevent dust penetration, cables can be sealed in the opening with a brush strip, or simply secure by a protective fringe edge (both supplied with the cabinet). Opening for a fan unit A large opening covered with a breakout-type blanking panel enables mounting and removal of the Triton fan unit from the outside of the cabinet without the need of using screws. Castors, levelling feet, base The cabinet can be placed on levelling feet (included) or, with optional equipment, on a base, castors or heavy-duty castors with reinforcing frame. Rear side of the cabinet There are two cable entries on the rear wall of the cabinet covered with breakout panels. One is at the top and the other at the bottom edge of the cover. The other cable entries are on the ceiling and in the base of the cabinet. Perforation of the skeleton The RMA cabinets have a

RON 3822.00
1