127 results (0,14354 seconds)

Show all filters

Brand

Merchant

Price (EUR)

Show all

Reset filter

Products
From
Shops

Advanced LLED3M3PSUR LED-Lite Addressable Maintained 3 Hour 3W LED in White Surface Mount Box

Advanced LLED3M3PSUR LED-Lite Addressable Maintained 3 Hour 3W LED in White Surface Mount Box

Advanced LLED3M3PSUR LED-Lite Addressable Maintained 3 Hour 3W LED in White Surface Mount BoxThe LLED3M3PSUR is a LED-Lite Addressable Maintained 3 Hour 3W LED in White Surface Mount Box.The LED-Lite range of surface mount luminaires offers a simple method of providing discrete emergency lighting in areas that require a robust surface-mounted self-contained solution. Available with a symmetrical wide-angle lens or an asymmetrical corridor lens for escape routes the luminaire simply requires a permanent 230-volt supply and addressable wiring to provide effective non-maintained emergency lighting with a 3-hour duration. The LED-Lite fully supports all features of the Lux Intelligent test system.OperationThe LED-Lite is supplied with integral non-maintained emergency lighting control gear. The self-contained unit offers 3-hour emergency lighting duration from integral nickel-metal hydride batteries. The LED-Lite incorporates a high brightness green LED into the white polycarbonate bezel to provide battery charge indication. The luminaires will automatically provide emergency lighting in the event of a loss of local mains supply. The benefits of modern LEDs are well documented.Installation The LED-Lite units have a BESA rear entry and 20mm knock-outs for surface conduit entry. When the corridor lens is specified the LED can easily be rotated to align the distribution along the escape route.

GBP 398.18
1

Advanced LLED3NM3PSUR LED-Lite Addressable Non-Maintained 3 Hour 3W LED in White Surface Mount Box

Advanced LLED3NM3PSUR LED-Lite Addressable Non-Maintained 3 Hour 3W LED in White Surface Mount Box

Advanced LLED3NM3PSUR LED-Lite Addressable Non-Maintained 3 Hour 3W LED in White Surface Mount BoxLED-Lite Addressable Non-Maintained 3 Hour 3W LED in White Surface Mount Box.The LED-Lite range of surface mount luminaires offers a simple method of providing discrete emergency lighting in areas that require a robust surface-mounted self-contained solution. Available with a symmetrical wide-angle lens or an asymmetrical corridor lens for escape routes the luminaire simply requires a permanent 230-volt supply and addressable wiring to provide effective non-maintained emergency lighting with a 3-hour duration. The LED-Lite fully supports all features of the Lux Intelligent test system.OperationThe LED-Lite is supplied with integral non-maintained emergency lighting control gear. The self-contained unit offers 3-hour emergency lighting duration from integral nickel-metal hydride batteries. The LED-Lite incorporates a high brightness green LED into the white polycarbonate bezel to provide battery charge indication. The luminaires will automatically provide emergency lighting in the event of a loss of local mains supply. The benefits of modern LEDs are well documented.Installation The LED-Lite units have a BESA rear entry and 20mm knock-outs for surface conduit entry. When the corridor lens is specified the LED can easily be rotated to align the distribution along the escape route.

GBP 398.18
1

Advanced LLED3M3PCSUR LED-Lite Addressable Maintained 3 Hour 3W Corridor Lens LED in White Surface Mount Box

Advanced LLED3M3PCSUR LED-Lite Addressable Maintained 3 Hour 3W Corridor Lens LED in White Surface Mount Box

Advanced LLED3M3PCSUR LED-Lite Addressable Maintained 3 Hour 3W Corridor Lens LED in White Surface Mount BoxTheLLED3M3PCSUR is aLED-Lite Addressable Maintained 3 Hour 3W Corridor Lens LED in White Surface Mount Box.The LED-Lite range of surface mount luminaires offers a simple method of providing discrete emergency lighting in areas that require a robust surface-mounted self-contained solution. Available with a symmetrical wide-angle lens or an asymmetrical corridor lens for escape routes the luminaire simply requires a permanent 230-volt supply and addressable wiring to provide effective non-maintained emergency lighting with a 3-hour duration. The LED-Lite fully supports all features of the Lux Intelligent test system.OperationThe LED-Lite is supplied with integral non-maintained emergency lighting control gear. The self-contained unit offers 3-hour emergency lighting duration from integral nickel-metal hydride batteries. The LED-Lite incorporates a high brightness green LED into the white polycarbonate bezel to provide battery charge indication. The luminaires will automatically provide emergency lighting in the event of a loss of local mains supply. The benefits of modern LEDs are well documented.Installation The LED-Lite units have a BESA rear entry and 20mm knock-outs for surface conduit entry. When the corridor lens is specified the LED can easily be rotated to align the distribution along the escape route.

GBP 398.18
1

Advanced Lux Intelligent BLEDM3PAD Emergency Light in White Finish Arrow Down

Advanced Lux Intelligent BLEDM3PAD Emergency Light in White Finish Arrow Down

Advanced Lux Intelligent BLEDM3PADSurface LED Blade-Lite Maintained 3 Hour DS Addr. Emergency Light in White Finish Arrow DownThe Blade-LED range of LED exit sign luminaires meet all the expectations of LED luminaires long life lower energy and a choice of attractive design solutions. All variations are supplied with legend screens been mounted on to the face of an acrylic panel. The luminaires can be surface mounted suspended or recessed. The recessed units look more conventional but still use the latest LED technology.The surface mounted and suspended versions feature extruded aluminium housings for the LEDs and associated control gear with separate kits available to convert a standard ceiling mounting luminaire in to a suspended or wall mounted variation. Suspended and surface mounted Blade LEDs are much smaller and attractive than their conventional fluorescent counterparts but still meet all the requirements including achieving the 28-metre viewing distance. Fifteen high brightness white LEDs clearly and evenly illuminate the safety sign legends.OperationAll units are supplied with integral maintained emergency lighting control gear which can be configured to run in a non-maintained condition also. In the event of a supply failure the exit signs will be illuminated for three hours. The luminaires support all the features of the Lux Intelligent range of emergency lighting test panels.InstallationA range of mounting brackets are available to allow direct fixing to walls and ceilings for both surface and suspended versions while the recessed version comes complete with adjustable arms to simplify installation into different thickness supporting surfaces. The recessed unit is supplied with a visible ceiling plate.Key FeaturesLong life and low energy performanceFully compatible with Lux Intelligent test systemVersatile stylish designComplies with EN60598.2.22

GBP 450.60
1

Advanced BLEDM3PRAL Blade-Lite LED Recess 3Hr M SS Addr White Arrow Left

Advanced BLEDM3PRAL Blade-Lite LED Recess 3Hr M SS Addr White Arrow Left

Advanced BLEDM3PRAL Blade-Lite LED Recess 3Hr M SS Addr White Arrow LeftThe Blade-LED range of LED exit sign luminaires meet all the expectations of LED luminaires long life lower energy and a choice of attractive design solutions. All variations are supplied with legend screens been mounted on to the face of an acrylic panel. The luminaires can be surface mounted suspended or recessed. The recessed units look more conventional but still use the latest LED technology. The surface mounted and suspended versions feature extruded aluminium housings for the LEDs and associated control gear with separate kits available to convert a standard ceiling mounting luminaire in to a suspended or wall mounted variation.Suspended and surface mounted Blade LEDs are much smaller and attractive than their conventional fluorescent counterparts but still meet all the requirements including achieving the 28 metre viewing distance. Fifteen high brightness white LEDs clearly and evenly illuminate the safety sign legends. Operation All units are supplied with integral maintained emergency lighting control gear which can be configured to run in a non-maintained condition also. In the event of a supply failure the exit signs will be illuminated for three hours. The luminaires support all the features of the Lux Intelligent range of emergency lighting test panels.Installation A range of mounting brackets are available to allow direct fixing to walls and ceilings for both surface and suspended versions while the recessed version comes complete with adjustable arms to simplify installation into different thickness supporting surfaces. The recessed unit is supplied with a visible ceiling plate.Key Features Long life and low energy performanceFully compatible with Lux Intelligent test systemVersatile stylish designComplies with EN60598.2.22

GBP 450.60
1

Advanced BLEDM3PRAR Blade-Lite LED Recess 3Hr M SS Addr White Arrow Right

Advanced BLEDM3PRAR Blade-Lite LED Recess 3Hr M SS Addr White Arrow Right

Advanced BLEDM3PRAR Blade-Lite LED Recess 3Hr M SS Addr White Arrow RightThe Blade-LED range of LED exit sign luminaires meet all the expectations of LED luminaires long life lower energy and a choice of attractive design solutions. All variations are supplied with legend screens been mounted on to the face of an acrylic panel. The luminaires can be surface mounted suspended or recessed. The recessed units look more conventional but still use the latest LED technology. The surface mounted and suspended versions feature extruded aluminium housings for the LEDs and associated control gear with separate kits available to convert a standard ceiling mounting luminaire in to a suspended or wall mounted variation.Suspended and surface mounted Blade LEDs are much smaller and attractive than their conventional fluorescent counterparts but still meet all the requirements including achieving the 28 metre viewing distance. Fifteen high brightness white LEDs clearly and evenly illuminate the safety sign legends. Operation All units are supplied with integral maintained emergency lighting control gear which can be configured to run in a non-maintained condition also. In the event of a supply failure the exit signs will be illuminated for three hours. The luminaires support all the features of the Lux Intelligent range of emergency lighting test panels.Installation A range of mounting brackets are available to allow direct fixing to walls and ceilings for both surface and suspended versions while the recessed version comes complete with adjustable arms to simplify installation into different thickness supporting surfaces. The recessed unit is supplied with a visible ceiling plate.Key Features Long life and low energy performanceFully compatible with Lux Intelligent test systemVersatile stylish designComplies with EN60598.2.22

GBP 450.60
1

Advanced LED-Lite Addressable Non-Maintained 3 Hour 3W Corridor Lens LED in White Surface Mount Box

Advanced LED-Lite Addressable Non-Maintained 3 Hour 3W Corridor Lens LED in White Surface Mount Box

Advanced LLED3NM3PSURC LED-Lite Addressable Non-Maintained 3 Hour 3W Corridor Lens LED in White Surface Mount BoxThe LED-Lite range of surface mount luminaires offers a simple method of providing discrete emergency lighting in areas that require a robust surface mounted self-contained solution. Available with a symmetrical wide angle lens or an asymmetrical corridor lens for escape routes the luminaire simply requires a permanent 230 Volt supply and addressable wiring to provide effective non-maintained emergency lighting with a 3 hour duration. The LED-Lite fully supports all features of the Lux Intelligent test system.OperationThe LED-Lite is supplied with integral non-maintained emergency lighting control gear.The self-contained unit offers 3 hour emergency lighting duration from integral nickel-metal hydride batteries. The LED-Lite incorporates a high brightness green LED into the white polycarbonate bezel to provide battery charge indication. The luminaires will automatically provide emergency lighting in the event of a loss of local mains supply. The benefits of modern LEDs are well documented.InstallationThe LED-Lite units have a BESA rear entry and 20mm knock-outs for surface conduit entry. When the corridor lens is specified the LED can easily be rotated to align the distribution along the escape route.Key FeaturesFully compatible with Lux Intelligent test systemAvailable as open area or corridor optionsReliable LED technologyLow power consumptionExcellent spacing valuesDiscrete surface mounted LED luminaireRobust construction

GBP 398.18
1

Advanced Lux Intelligent ELED230P Exi-LED Wall Mounted Slave Exit Sign with White finish Arrow Down

Advanced Lux Intelligent ELED230P Exi-LED Wall Mounted Slave Exit Sign with White finish Arrow Down

Advanced Lux Intelligent ELED230P Exi-LED Wall Mounted Slave Exit Sign with White finish Arrow DownThe Exi-LED exit sign is a reliable attractive product that offers excellent performance with long life and low energy benefits. Its slim but robust welded steel housing available in a selection of finishes provides a picture frame appearance around the brightly lit exit legend. These legends are available with a choice of directions and formats European or ISO.Although smaller than conventional fluorescent exit signs the Exi-LED still provides a useful 25 metre viewing distance in both mains and emergency modes with 15 high brightness white LEDs and state of the art reflector. The Exi-LED fully supports all features of the Lux Intelligent test system and complies with all the relevant requirements of EN60598.2.22.OperationThe Exi-LED panel features matrix dot coating to ensure the LEDs evenly illuminate the safety sign legend. Standard luminaires are supplied with integral maintained emergency control gear which in the event of a power failure will ensure the exit sign continues to operate with the same sign luminance for 3 Hours from the internal NiMH battery.InstallationThe Exi-LED mounts on the wall using simple keyhole slots or via the central BESA entry. The front cover simply hooks onto the back plate and is retained with a single fixture located centrally on the base.Key FeaturesFully compatible with LuxIntelligent test systemLong life and low energy performanceSleek stylish designFully complies with all aspects of EN60598.2.22Please Note Although listed under Emergency Lighting the 230v version is not an emergency light and should not be used as one. The 230v version is only for use as a standard light fitting.

GBP 335.51
1

Advanced Lux Intelligent BLEDM3PRAD Recessed LED Blade-Lite Maintained 3 Hour DS Addressable Emergency Light White Arrow Down

Advanced Lux Intelligent BLEDM3PRAD Recessed LED Blade-Lite Maintained 3 Hour DS Addressable Emergency Light White Arrow Down

Advanced Lux Intelligent BLEDM3PRAD Recessed LED Blade-Lite Maintained 3 Hour DS Addressable Emergency Light White Arrow DownThe Blade-LED range of LED exit sign luminaires meet all the expectations of LED luminaires long life lower energy and a choice of attractive design solutions. All variations are supplied with legend screens been mounted on to the face of an acrylic panel. The luminaires can be surface mounted suspended or recessed. The recessed units look more conventional but still use the latest LED technology.The surface mounted and suspended versions feature extruded aluminium housings for the LEDs and associated control gear with separate kits available to convert a standard ceiling mounting luminaire in to a suspended or wall mounted variation. Suspended and surface mounted Blade LEDs are much smaller and attractive than their conventional fluorescent counterparts but still meet all the requirements including achieving the 28-metre viewing distance. Fifteen high brightness white LEDs clearly and evenly illuminate the safety sign legends.OperationAll units are supplied with integral maintained emergency lighting control gear which can be configured to run in a non-maintained condition also. In the event of a supply failure the exit signs will be illuminated for three hours. The luminaires support all the features of the Lux Intelligent range of emergency lighting test panels.InstallationA range of mounting brackets are available to allow direct fixing to walls and ceilings for both surface and suspended versions while the recessed version comes complete with adjustable arms to simplify installation into different thickness supporting surfaces. The recessed unit is supplied with a visible ceiling plate.Key FeaturesLong life and low energy performanceFully compatible with Lux Intelligent test systemVersatile stylish designComplies with EN60598.2.22

GBP 450.60
1

Advanced Lux Intelligent ELEDM3PBKAL Exi-LED Wall Mounted 3 Hour Maintained Exit Sign with White Finish Arrow Left

Advanced Lux Intelligent ELEDM3PBKAL Exi-LED Wall Mounted 3 Hour Maintained Exit Sign with White Finish Arrow Left

Advanced Lux Intelligent ELEDM3PBKAL Exi-LED Wall Mounted 3 Hour Maintained Exit Sign with White Finish Arrow LeftThe Exi-LED exit sign is a reliable attractive product that offers excellent performance with long life and low energy benefits. Its slim but robust welded steel housing available in a selection of finishes provides a picture frame appearance around the brightly lit exit legend. These legends are available with a choice of directions and formats European or ISO.Although smaller than conventional fluorescent exit signs the Exi-LED still provides a useful 25 metre viewing distance in both mains and emergency modes with 15 high brightness white LEDs and state of the art reflector. The Exi-LED fully supports all features of the Lux Intelligent test system and complies with all the relevant requirements of EN60598.2.22.OperationThe Exi-LED panel features matrix dot coating to ensure the LEDs evenly illuminate the safety sign legend. Standard luminaires are supplied with integral maintained emergency control gear which in the event of a power failure will ensure the exit sign continues to operate with the same sign luminance for 3 Hours from the internal NiMH battery.InstallationThe Exi-LED mounts on the wall using simple keyhole slots or via the central BESA entry. The front cover simply hooks onto the back plate and is retained with a single fixture located centrally on the base.Key FeaturesFully compatible with LuxIntelligent test systemLong life and low energy performanceSleek stylish designFully complies with all aspects of EN60598.2.22Please Note Although listed under Emergency Lighting the 230v version is not an emergency light and should not be used as one. The 230v version is only for use as a standard light fitting.

GBP 348.85
1

Advanced Lux Intelligent ELEDM3P Exi-LED Wall Mounted 3 Hour Maintained Exit Sign with White Finish Arrow Down

Advanced Lux Intelligent ELEDM3P Exi-LED Wall Mounted 3 Hour Maintained Exit Sign with White Finish Arrow Down

Advanced Lux Intelligent ELEDM3P Exi-LED Wall Mounted 3 Hour Maintained Exit Sign with White Finish Arrow DownThe Exi-LED exit sign is a reliable attractive product that offers excellent performance with long life and low energy benefits. Its slim but robust welded steel housing available in a selection of finishes provides a picture frame appearance around the brightly lit exit legend. These legends are available with a choice of directions and formats European or ISO.Although smaller than conventional fluorescent exit signs the Exi-LED still provides a useful 25 metre viewing distance in both mains and emergency modes with 15 high brightness white LEDs and state of the art reflector. The Exi-LED fully supports all features of the Lux Intelligent test system and complies with all the relevant requirements of EN60598.2.22.OperationThe Exi-LED panel features matrix dot coating to ensure the LEDs evenly illuminate the safety sign legend. Standard luminaires are supplied with integral maintained emergency control gear which in the event of a power failure will ensure the exit sign continues to operate with the same sign luminance for 3 Hours from the internal NiMH battery.InstallationThe Exi-LED mounts on the wall using simple keyhole slots or via the central BESA entry. The front cover simply hooks onto the back plate and is retained with a single fixture located centrally on the base.Key FeaturesFully compatible with LuxIntelligent test systemLong life and low energy performanceSleek stylish designFully complies with all aspects of EN60598.2.22Please Note Although listed under Emergency Lighting the 230v version is not an emergency light and should not be used as one. The 230v version is only for use as a standard light fitting.

GBP 348.85
1

Advanced Lux Intelligent ELEDM3PAU Exi-LED Wall Mounted 3 Hour Maintained Exit Sign with White Finish Arrow Up

Advanced Lux Intelligent ELEDM3PAU Exi-LED Wall Mounted 3 Hour Maintained Exit Sign with White Finish Arrow Up

Advanced Lux Intelligent ELEDM3PAU Exi-LED Wall Mounted 3 Hour Maintained Exit Sign with White Finish Arrow UpThe Exi-LED exit sign is a reliable attractive product that offers excellent performance with long life and low energy benefits. Its slim but robust welded steel housing available in a selection of finishes provides a picture frame appearance around the brightly lit exit legend. These legends are available with a choice of directions and formats European or ISO.Although smaller than conventional fluorescent exit signs the Exi-LED still provides a useful 25 metre viewing distance in both mains and emergency modes with 15 high brightness white LEDs and state of the art reflector. The Exi-LED fully supports all features of the Lux Intelligent test system and complies with all the relevant requirements of EN60598.2.22.OperationThe Exi-LED panel features matrix dot coating to ensure the LEDs evenly illuminate the safety sign legend. Standard luminaires are supplied with integral maintained emergency control gear which in the event of a power failure will ensure the exit sign continues to operate with the same sign luminance for 3 Hours from the internal NiMH battery.InstallationThe Exi-LED mounts on the wall using simple keyhole slots or via the central BESA entry. The front cover simply hooks onto the back plate and is retained with a single fixture located centrally on the base.Key FeaturesFully compatible with LuxIntelligent test systemLong life and low energy performanceSleek stylish designFully complies with all aspects of EN60598.2.22Please Note Although listed under Emergency Lighting the 230v version is not an emergency light and should not be used as one. The 230v version is only for use as a standard light fitting.

GBP 348.85
1

Advanced Lux Intelligent ELEDM3PAL Exi-LED Wall Mounted 3 Hour Maintained Exit Sign with White Finish Arrow Left

Advanced Lux Intelligent ELEDM3PAL Exi-LED Wall Mounted 3 Hour Maintained Exit Sign with White Finish Arrow Left

Advanced Lux Intelligent ELEDM3PAL Exi-LED Wall Mounted 3 Hour Maintained Exit Sign with White Finish Arrow LeftThe Exi-LED exit sign is a reliable attractive product that offers excellent performance with long life and low energy benefits. Its slim but robust welded steel housing available in a selection of finishes provides a picture frame appearance around the brightly lit exit legend. These legends are available with a choice of directions and formats European or ISO.Although smaller than conventional fluorescent exit signs the Exi-LED still provides a useful 25 metre viewing distance in both mains and emergency modes with 15 high brightness white LEDs and state of the art reflector. The Exi-LED fully supports all features of the Lux Intelligent test system and complies with all the relevant requirements of EN60598.2.22.OperationThe Exi-LED panel features matrix dot coating to ensure the LEDs evenly illuminate the safety sign legend. Standard luminaires are supplied with integral maintained emergency control gear which in the event of a power failure will ensure the exit sign continues to operate with the same sign luminance for 3 Hours from the internal NiMH battery.InstallationThe Exi-LED mounts on the wall using simple keyhole slots or via the central BESA entry. The front cover simply hooks onto the back plate and is retained with a single fixture located centrally on the base.Key FeaturesFully compatible with LuxIntelligent test systemLong life and low energy performanceSleek stylish designFully complies with all aspects of EN60598.2.22Please Note Although listed under Emergency Lighting the 230v version is not an emergency light and should not be used as one. The 230v version is only for use as a standard light fitting.

GBP 348.85
1

Advanced Lux Intelligent ELEDM3PBKAU Exi-LED Wall Mounted 3 Hour Maintained Exit Sign with White Finish Arrow Up

Advanced Lux Intelligent ELEDM3PBKAU Exi-LED Wall Mounted 3 Hour Maintained Exit Sign with White Finish Arrow Up

Advanced Lux Intelligent ELEDM3PBKAU Exi-LED Wall Mounted 3 Hour Maintained Exit Sign with White Finish Arrow UpThe Exi-LED exit sign is a reliable attractive product that offers excellent performance with long life and low energy benefits. Its slim but robust welded steel housing available in a selection of finishes provides a picture frame appearance around the brightly lit exit legend. These legends are available with a choice of directions and formats European or ISO.Although smaller than conventional fluorescent exit signs the Exi-LED still provides a useful 25 metre viewing distance in both mains and emergency modes with 15 high brightness white LEDs and state of the art reflector. The Exi-LED fully supports all features of the Lux Intelligent test system and complies with all the relevant requirements of EN60598.2.22.OperationThe Exi-LED panel features matrix dot coating to ensure the LEDs evenly illuminate the safety sign legend. Standard luminaires are supplied with integral maintained emergency control gear which in the event of a power failure will ensure the exit sign continues to operate with the same sign luminance for 3 Hours from the internal NiMH battery.InstallationThe Exi-LED mounts on the wall using simple keyhole slots or via the central BESA entry. The front cover simply hooks onto the back plate and is retained with a single fixture located centrally on the base.Key FeaturesFully compatible with LuxIntelligent test systemLong life and low energy performanceSleek stylish designFully complies with all aspects of EN60598.2.22Please Note Although listed under Emergency Lighting the 230v version is not an emergency light and should not be used as one. The 230v version is only for use as a standard light fitting.

GBP 348.85
1

Advanced Lux Intelligent ELEDM3PBKAR Exi-LED Wall Mounted 3 Hour Maintained Exit Sign with White Finish Arrow Right

Advanced Lux Intelligent ELEDM3PBKAR Exi-LED Wall Mounted 3 Hour Maintained Exit Sign with White Finish Arrow Right

Advanced Lux Intelligent ELEDM3PBKAR Exi-LED Wall Mounted 3 Hour Maintained Exit Sign with White Finish Arrow RightThe Exi-LED exit sign is a reliable attractive product that offers excellent performance with long life and low energy benefits. Its slim but robust welded steel housing available in a selection of finishes provides a picture frame appearance around the brightly lit exit legend. These legends are available with a choice of directions and formats European or ISO.Although smaller than conventional fluorescent exit signs the Exi-LED still provides a useful 25 metre viewing distance in both mains and emergency modes with 15 high brightness white LEDs and state of the art reflector. The Exi-LED fully supports all features of the Lux Intelligent test system and complies with all the relevant requirements of EN60598.2.22.OperationThe Exi-LED panel features matrix dot coating to ensure the LEDs evenly illuminate the safety sign legend. Standard luminaires are supplied with integral maintained emergency control gear which in the event of a power failure will ensure the exit sign continues to operate with the same sign luminance for 3 Hours from the internal NiMH battery.InstallationThe Exi-LED mounts on the wall using simple keyhole slots or via the central BESA entry. The front cover simply hooks onto the back plate and is retained with a single fixture located centrally on the base.Key FeaturesFully compatible with LuxIntelligent test systemLong life and low energy performanceSleek stylish designFully complies with all aspects of EN60598.2.22Please Note Although listed under Emergency Lighting the 230v version is not an emergency light and should not be used as one. The 230v version is only for use as a standard light fitting.

GBP 348.85
1

Advanced Lux Intelligent ELEDM3PAR Exi-LED Wall Mounted 3 Hour Maintained Exit Sign with White Finish Arrow Right

Advanced Lux Intelligent ELEDM3PAR Exi-LED Wall Mounted 3 Hour Maintained Exit Sign with White Finish Arrow Right

Advanced Lux Intelligent ELEDM3PAR Exi-LED Wall Mounted 3 Hour Maintained Exit Sign with White Finish Arrow RightThe Exi-LED exit sign is a reliable attractive product that offers excellent performance with long life and low energy benefits. Its slim but robust welded steel housing available in a selection of finishes provides a picture frame appearance around the brightly lit exit legend. These legends are available with a choice of directions and formats European or ISO.Although smaller than conventional fluorescent exit signs the Exi-LED still provides a useful 25 metre viewing distance in both mains and emergency modes with 15 high brightness white LEDs and state of the art reflector. The Exi-LED fully supports all features of the Lux Intelligent test system and complies with all the relevant requirements of EN60598.2.22.OperationThe Exi-LED panel features matrix dot coating to ensure the LEDs evenly illuminate the safety sign legend. Standard luminaires are supplied with integral maintained emergency control gear which in the event of a power failure will ensure the exit sign continues to operate with the same sign luminance for 3 Hours from the internal NiMH battery.InstallationThe Exi-LED mounts on the wall using simple keyhole slots or via the central BESA entry. The front cover simply hooks onto the back plate and is retained with a single fixture located centrally on the base.Key FeaturesFully compatible with LuxIntelligent test systemLong life and low energy performanceSleek stylish designFully complies with all aspects of EN60598.2.22Please Note although listed under Emergency Lighting the 230v version is not an emergency light and should not be used as one. The 230v version is only for use as a standard light fitting.

GBP 348.85
1

Advanced Lux Intelligent ELEDM3PBK Exi-LED Wall Mounted 3 Hour Maintained Exit Sign with White Finish Arrow Down

Advanced Lux Intelligent ELEDM3PBK Exi-LED Wall Mounted 3 Hour Maintained Exit Sign with White Finish Arrow Down

Advanced Lux Intelligent ELEDM3PBK Exi-LED Wall Mounted 3 Hour Maintained Exit Sign with White Finish Arrow DownThe Exi-LED exit sign is a reliable attractive product that offers excellent performance with long life and low energy benefits. Its slim but robust welded steel housing available in a selection of finishes provides a picture frame appearance around the brightly lit exit legend. These legends are available with a choice of directions and formats European or ISO.Although smaller than conventional fluorescent exit signs the Exi-LED still provides a useful 25 metre viewing distance in both mains and emergency modes with 15 high brightness white LEDs and state of the art reflector. The Exi-LED fully supports all features of the Lux Intelligent test system and complies with all the relevant requirements of EN60598.2.22.OperationThe Exi-LED panel features matrix dot coating to ensure the LEDs evenly illuminate the safety sign legend. Standard luminaires are supplied with integral maintained emergency control gear which in the event of a power failure will ensure the exit sign continues to operate with the same sign luminance for 3 Hours from the internal NiMH battery.InstallationThe Exi-LED mounts on the wall using simple keyhole slots or via the central BESA entry. The front cover simply hooks onto the back plate and is retained with a single fixture located centrally on the base.Key FeaturesFully compatible with LuxIntelligent test systemLong life and low energy performanceSleek stylish designFully complies with all aspects of EN60598.2.22Please Note although listed under Emergency Lighting the 230v version is not an emergency light and should not be used as one. The 230v version is only for use as a standard light fitting.

GBP 348.85
1

Advanced Lux Intelligent BLEDM3PRAU Recessed LED Blade-Lite Maintained 3 Hour DS Addressable Emergency Light White Arrow Up

Advanced Lux Intelligent BLEDM3PRAU Recessed LED Blade-Lite Maintained 3 Hour DS Addressable Emergency Light White Arrow Up

Advanced Lux Intelligent BLEDM3PRAU Recessed LED Blade-Lite Maintained 3 Hour DS Addressable Emergency Light White Arrow UpThe Blade-LED range of LED exit sign luminaires meet all the expectations of LED luminaires long life lower energy and a choice of attractive design solutions. All variations are supplied with legend screens been mounted on to the face of an acrylic panel. The luminaires can be surface mounted suspended or recessed. The recessed units look more conventional but still use the latest LED technology.The surface mounted and suspended versions feature extruded aluminium housings for the LEDs and associated control gear with separate kits available to convert a standard ceiling mounting luminaire in to a suspended or wall mounted variation. Suspended and surface mounted Blade LEDs are much smaller and attractive than their conventional fluorescent counterparts but still meet all the requirements including achieving the 28-metre viewing distance. Fifteen high brightness white LEDs clearly and evenly illuminate the safety sign legends.OperationAll units are supplied with integral maintained emergency lighting control gear which can be configured to run in a non-maintained condition also. In the event of a supply failure the exit signs will be illuminated for three hours. The luminaires support all the features of the Lux Intelligent range of emergency lighting test panels.InstallationA range of mounting brackets are available to allow direct fixing to walls and ceilings for both surface and suspended versions while the recessed version comes complete with adjustable arms to simplify installation into different thickness supporting surfaces. The recessed unit is supplied with a visible ceiling plate.Key FeaturesLong life and low energy performanceFully compatible with Lux Intelligent test systemVersatile stylish designComplies with EN60598.2.22

GBP 450.60
1

Advanced Lux Intelligent RLEDM3PSLEXAR Slim-line Mor-LED 3 Hr Maintained Addressable Bulkhead cw 16 White LEDs

Advanced Lux Intelligent RLEDM3PSLEXAR Slim-line Mor-LED 3 Hr Maintained Addressable Bulkhead cw 16 White LEDs

Advanced Lux IntelligentRLEDM3PSLEXAR Slim-line Mor-LED 3 Hr Maintained Addressable Bulkhead cw 16 White LEDs and Fresnel Lens Exit LegendThe Mor-LED bulkhead is a robust IP65 rated polycarbonate base combined with a clear fresnel lens housing 16 high output white LEDs and constant current maintained drive circuit. The luminaire provides 90 lumens and the lens generates a wide intensity distribution ideal for providing good luminance on an escape route. A deep 150mm opal diffuser is available to provide double sided signage if required. The Mor-LED fully supports all features of the Lux Intelligent test system and complies fully with all the relevant requirements of EN60598.2.22.OperationThe Mor-LED is supplied with integral maintained emergency lighting control gear. Non-maintained operation is achieved by excluding the switched Live supply. The self-contained variants offer 3-hour emergency lighting duration from integral nickel cadmium batteries. The luminaires can be used for standard switched mains lighting but will automatically provide emergency lighting in the event of a loss of local mains supply. The benefits of modern LEDs are well documented. They are very energy efficient and offer very long life typically over 50000 hours. They also operate at low temperatures no cold starting problems and do not create higher internal temperatures therefore improving the life of the internal batteries as well as making them more suitable for use in cold store environments. They are ideal for low maintenance applications offering 4 to 5 years of maintenance free operation.Installation20mm drilling points are available at either end of the base as well as one on the rear.Key FeaturesFully compatible with Lux Intelligent test systemLong life LEDs 50000 HoursIP65 Rated bulkheadLow power consumption less than 10WSuitable for use in cold stores down to -20CFully complies with all aspects of EN60598.2.22Lens can be fitted with 100mm high self-adhesive signs

GBP 192.34
1

Advanced Lux Intelligent ELEDM3PWHAL Exi-LED Wall Mounted 3 Hour Maintained Exit Sign with Textured White Finish Arrow Left

Advanced Lux Intelligent ELEDM3PWHAL Exi-LED Wall Mounted 3 Hour Maintained Exit Sign with Textured White Finish Arrow Left

Advanced Lux Intelligent ELEDM3PWHAL Exi-LED Wall Mounted 3 Hour Maintained Exit Sign with Textured White Finish Arrow LeftThe Exi-LED exit sign is a reliable attractive product that offers excellent performance with long life and low energy benefits. Its slim but robust welded steel housing available in a selection of finishes provides a picture frame appearance around the brightly lit exit legend. These legends are available with a choice of directions and formats European or ISO.Although smaller than conventional fluorescent exit signs the Exi-LED still provides a useful 25 metre viewing distance in both mains and emergency modes with 15 high brightness white LEDs and state of the art reflector. The Exi-LED fully supports all features of the Lux Intelligent test system and complies with all the relevant requirements of EN60598.2.22.OperationThe Exi-LED panel features matrix dot coating to ensure the LEDs evenly illuminate the safety sign legend. Standard luminaires are supplied with integral maintained emergency control gear which in the event of a power failure will ensure the exit sign continues to operate with the same sign luminance for 3 Hours from the internal NiMH battery.InstallationThe Exi-LED mounts on the wall using simple keyhole slots or via the central BESA entry. The front cover simply hooks onto the back plate and is retained with a single fixture located centrally on the base.Key FeaturesFully compatible with LuxIntelligent test systemLong life and low energy performanceSleek stylish designFully complies with all aspects of EN60598.2.22Please Note Although listed under Emergency Lighting the 230v version is not an emergency light and should not be used as one. The 230v version is only for use as a standard light fitting.

GBP 274.80
1