8 results (0,13265 seconds)

Brand

Merchant

Price (EUR)

Reset filter

Products
From
Shops

Advanced Dynamix PC-NET-015 MxPro 5 Service Tool Software

Advanced LL-PGR Lifeline Vibrating Rechargeable Pager with USB Charger

Advanced LL-PGR Lifeline Vibrating Rechargeable Pager with USB Charger

Advanced LL-PGR Lifeline Vibrating Rechargeable Pager with USB ChargerThe LifeLine rechargeable pager is an alphanumeric pager with a large TFT colour display which displays easy-to-follow icons and twenty-five characters of text on up to six lines. The handheld battery-operated pager is specifically programmed to work supporting all the features of the LifeLine system in order meet the relevant standards.The pager is easy to use with six large buttons forming the user interface. Two of the buttons are soft keys menu driven from the display to allow quick and easy access to messages.Features include various tone and vibration settings and a selection of individual alarms an operator can set with all messages date and time stamped. The device also has a separate status LED in the top right-hand corner. When the pager receives a message the status LED will illuminate for five second along with an audibletactile alert. The device can store up to 200 messages and when full the oldest message will be removed to make room for the latest.The rechargeable Lithium battery is capable of providing up to ten days operation in standby mode and the display also includes a voltage level indicator. The recharging function is provided via a 5V mini-USB port.The pager comes complete with a belt holster charging cable and plug.There is no limit to the number of pagers that can be used with a LifeLine panel and each pager has its own identity for installation.Key FeaturesSupports all features of the LifeLine pager panelLarge TFT Colour display 2.2 Inch 320 240 pixelsRechargeable battery via 5V mini-USB PortUp to 10 Days battery life in standbyBattery Level IndicatorSelection of vibration and tone alert

GBP 462.60
1

Advanced LL-PGR-01 Lifeline Vibrating Rechargeable Pager with Out of Range Enabled and Charger

Advanced LL-PGR-01 Lifeline Vibrating Rechargeable Pager with Out of Range Enabled and Charger

Advanced LL-PGR-01 Lifeline Vibrating Rechargeable Pager with Out of Range Enabled and ChargerThe LifeLine rechargeable pager is an alphanumeric pager with a large TFT colour display which displays easy-to-follow icons and twenty-five characters of text on up to six lines. The handheld battery-operated pager is specifically programmed to work supporting all the features of the LifeLine system in order meet the relevant standards.The pager is easy to use with six large buttons forming the user interface. Two of the buttons are soft keys menu driven from the display to allow quick and easy access to messages.Features include various tone and vibration settings and a selection of individual alarms an operator can set with all messages date and time stamped. The device also has a separate status LED in the top right-hand corner. When the pager receives a message the status LED will illuminate for five second along with an audibletactile alert. The device can store up to 200 messages and when full the oldest message will be removed to make room for the latest.The rechargeable Lithium battery is capable of providing up to ten days operation in standby mode and the display also includes a voltage level indicator. The recharging function is provided via a 5V mini-USB port.The pager comes complete with a belt holster charging cable and plug.There is no limit to the number of pagers that can be used with a LifeLine panel and each pager has its own identity for installation.Key FeaturesSupports all features of the LifeLine pager panelLarge TFT Colour display 2.2 Inch 320 240 pixelsRechargeable battery via 5V mini-USB PortUp to 10 Days battery life in standbyBattery Level IndicatorSelection of vibration and tone alert

GBP 462.60
1

Advanced LL-PGR-02 Lifeline Engineering Vibrating Rechargeable Pager with USB Charger

Advanced LL-PGR-02 Lifeline Engineering Vibrating Rechargeable Pager with USB Charger

Advanced LL-PGR-02 Lifeline Engineering Vibrating Rechargeable Pager comes with USB ChargerThe LifeLine rechargeable pager is an alphanumeric pager with a large TFT colour display which displays easy-to-follow icons and twenty-five characters of text on up to six lines. The handheld battery-operated pager is specifically programmed to work supporting all the features of the LifeLine system in order meet the relevant standards.The pager is easy to use with six large buttons forming the user interface. Two of the buttons are soft keys menu driven from the display to allow quick and easy access to messages.Features include various tone and vibration settings and a selection of individual alarms an operator can set with all messages date and time stamped. The device also has a separate status LED in the top right-hand corner. When the pager receives a message the status LED will illuminate for five second along with an audibletactile alert. The device can store up to 200 messages and when full the oldest message will be removed to make room for the latest.The rechargeable Lithium battery is capable of providing up to ten days operation in standby mode and the display also includes a voltage level indicator. The recharging function is provided via a 5V mini-USB port.The pager comes complete with a belt holster charging cable and plug.There is no limit to the number of pagers that can be used with a LifeLine panel and each pager has its own identity for installation.Key FeaturesSupports all features of the LifeLine pager panelLarge TFT Colour display 2.2 Inch 320 240 pixelsRechargeable battery via 5V mini-USB PortUp to 10 Days battery life in standbyBattery Level IndicatorSelection of vibration and tone alert

GBP 462.60
1

Advanced MXP-650 2.5A 24V EN54-4 PSE amp Battery Charger - Large Up To 2x 17Ah Batteries

Advanced MXP-650 2.5A 24V EN54-4 PSE amp Battery Charger - Large Up To 2x 17Ah Batteries

Advanced MXP-650 2.5A 24V EN54-4 PSE Battery Charger - Large Up To 2x 17Ah BatteriesThe Advanced MXP-650 is a 2.5A power supply unit which can be used for any fire alarm system including AOV systems. They are certified to EN54-4 by VdS and EN12101-10 by AFNOR ensuring reliable and safe operation.Suited for almost any application the power supply unit and battery charger have been developed using the latest technology to provide a high-efficiency switch-mode power supply.The units include intelligent battery charging technology mains and battery monitoring including two independent volt-free outputs. In addition they also provide deep battery discharge protection in case of a prolonged mains failure.The inclusion of LED indicators provides quick status diagnostics of the power supply.These power supply units compliment the MXP-549 1.5A model.Key Features2.5A outputHousing fits 2 x 17Ah batteriesA range of power supply equipment with power output options to suit most applicationsUniversal AC inputIndependently monitored dual outputs of 27.6VdcHigh-efficiency switched mode power suppliesAlternative enclosure sizes to support standby battery backup optionsExterior status LEDs to support diagnosticsLoad-sharing supporting either rapid charging or brief high-current peak-loadsNo output interruption during automatic switchover between mains and battery powerDeep discharge protection disconnects battery from load when output voltage falls below 21.6VSelf-resetting battery fuse protection

GBP 263.58
1

Advanced MXP-650D 2.5A 24V EN54-4 PSE amp Battery Charger - Deep Up to 2x 24Ah or 38Ah Batteries

Advanced MXP-650D 2.5A 24V EN54-4 PSE amp Battery Charger - Deep Up to 2x 24Ah or 38Ah Batteries

Advanced MXP-650D 2.5A 24V EN54-4 PSE Battery Charger - Deep Up to 2x 24Ah or 38Ah BatteriesThe Advanced MXP-650 is a 2.5A power supply unit which can be used for any fire alarm system including AOV systems. They are certified to EN54-4 by VdS and EN12101-10 by AFNOR ensuring reliable and safe operation.Suited for almost any application the power supply unit and battery charger have been developed using the latest technology to provide a high-efficiency switch-mode power supply.The units include intelligent battery charging technology mains and battery monitoring including two independent volt-free outputs. In addition they also provide deep battery discharge protection in case of a prolonged mains failure.The inclusion of LED indicators provides quick status diagnostics of the power supply.These power supply units compliment the MXP-549 1.5A model.Key Features2.5A outputHousing fits 2x 24Ah or 38Ah batteriesA range of power supply equipment with power output options to suit most applicationsUniversal AC inputIndependently monitored dual outputs of 27.6VdcHigh-efficiency switched mode power suppliesAlternative enclosure sizes to support standby battery backup optionsExterior status LEDs to support diagnosticsLoad-sharing supporting either rapid charging or brief high-current peak-loadsNo output interruption during automatic switchover between mains and battery powerDeep discharge protection disconnects battery from load when output voltage falls below 21.6VSelf-resetting battery fuse protectionThe image is for illustrative purposes only.

GBP 313.84
1

Advanced MXP-651D 5.0A 24V EN54-4 PSE amp Battery Charger - Deep Up to 2x 24Ah or 38Ah Batteries

Advanced MXP-651D 5.0A 24V EN54-4 PSE amp Battery Charger - Deep Up to 2x 24Ah or 38Ah Batteries

Advanced MXP-651D 5.0A 24V EN54-4 PSE Battery Charger - Deep Up to 2x 24Ah or 38Ah BatteriesThe Advanced MXP-650 is a 2.5A power supply unit which can be used for any fire alarm system including AOV systems. They are certified to EN54-4 by VdS and EN12101-10 by AFNOR ensuring reliable and safe operation.Suited for almost any application the power supply unit and battery charger have been developed using the latest technology to provide a high-efficiency switch-mode power supply.The units include intelligent battery charging technology mains and battery monitoring including two independent volt-free outputs. In addition they also provide deep battery discharge protection in case of a prolonged mains failure.The inclusion of LED indicators provides quick status diagnostics of the power supply.These power supply units compliment the MXP-549 1.5A model.Key Features5.0A outputHousing fits 2x 24Ah or 38Ah batteriesA range of power supply equipment with power output options to suit most applicationsUniversal AC inputIndependently monitored dual outputs of 27.6VdcHigh-efficiency switched mode power suppliesAlternative enclosure sizes to support standby battery backup optionsExterior status LEDs to support diagnosticsLoad-sharing supporting either rapid charging or brief high-current peak-loadsNo output interruption during automatic switchover between mains and battery powerDeep discharge protection disconnects battery from load when output voltage falls below 21.6VSelf-resetting battery fuse protectionThe image is for illustrative purposes only.

GBP 446.39
1

Advanced MxPro MXP-542 24VDC - 24VDC Convertor Isolator

Advanced MxPro MXP-542 24VDC - 24VDC Convertor Isolator

Advanced MxPro MXP-542 24VDC - 24VDC Convertor IsolatorA 24VDC - 24VDC Convertor Isolator for use with Mxp-631 Fib.The Mxp-631 media converters are equipped with a multiple interface circuit that can handle RS-232 or RS-422485 serial interfaces and multi-mode or single-mode fiber. Mxp-631 converters are used to extend serial transmission up to 5km Mxp-631-MM with multi-mode fiber or up to 40km Mxp-631-SM with single-mode fiber. The Mxp-631 converters can be configured to convert either RS-232 signals or RS422485 signals but not both at the same time.The Mxp-631 converters can automatically detect the serial baudrate. This is an extremely convenient feature. Even if a devices baudrate is changed the signal will still be transmitted through the media converter without any data loss.The Mxp-631 converters can be used to connect serial devices to a fiber ring. To form the ring connect to the Tx port of one Mxp-631 to the Rx port of a neighbouring converter. Once the ring is set up simply use the DIP switches to configure the Mxp-631 converters for ring mode. When one node transmits a signal the signal travels around the ring until it returns back to the transmitting unit which then blocks the signal. With the Mxp-631 you can set up fiber rings that have a total circumference of up to 100km.ADDC is a patented hardware data flow solution to handle RS-485 data direction control. ADDC senses and controls RS-485 data direction automatically making it unnecessary to use the hand shaking signal.Key FeaturesExtends RS-232422485 transmission up to40 km with single-mode - Mxp-631-SM5 km with multi-mode - Mxp-631-MMCompact sizeProtects against electrical interference and chemical corrosionSupports baudrates of 50 bps to 921.6 KbpsWide temperature models available -40 to 75CPlease note this way of communication is not EN54 approved.

GBP 129.11
1