36 results (0,15095 seconds)

Show all filters

Brand

Merchant

Price (EUR)

Reset filter

Products
From
Shops

Advanced MXP-651D 5.0A 24V EN54-4 PSE amp Battery Charger - Deep Up to 2x 24Ah or 38Ah Batteries

Advanced MXP-651D 5.0A 24V EN54-4 PSE amp Battery Charger - Deep Up to 2x 24Ah or 38Ah Batteries

Advanced MXP-651D 5.0A 24V EN54-4 PSE Battery Charger - Deep Up to 2x 24Ah or 38Ah BatteriesThe Advanced MXP-650 is a 2.5A power supply unit which can be used for any fire alarm system including AOV systems. They are certified to EN54-4 by VdS and EN12101-10 by AFNOR ensuring reliable and safe operation.Suited for almost any application the power supply unit and battery charger have been developed using the latest technology to provide a high-efficiency switch-mode power supply.The units include intelligent battery charging technology mains and battery monitoring including two independent volt-free outputs. In addition they also provide deep battery discharge protection in case of a prolonged mains failure.The inclusion of LED indicators provides quick status diagnostics of the power supply.These power supply units compliment the MXP-549 1.5A model.Key Features5.0A outputHousing fits 2x 24Ah or 38Ah batteriesA range of power supply equipment with power output options to suit most applicationsUniversal AC inputIndependently monitored dual outputs of 27.6VdcHigh-efficiency switched mode power suppliesAlternative enclosure sizes to support standby battery backup optionsExterior status LEDs to support diagnosticsLoad-sharing supporting either rapid charging or brief high-current peak-loadsNo output interruption during automatic switchover between mains and battery powerDeep discharge protection disconnects battery from load when output voltage falls below 21.6VSelf-resetting battery fuse protectionThe image is for illustrative purposes only.

GBP 446.39
1

Advanced MXP-650 2.5A 24V EN54-4 PSE amp Battery Charger - Large Up To 2x 17Ah Batteries

Advanced MXP-650 2.5A 24V EN54-4 PSE amp Battery Charger - Large Up To 2x 17Ah Batteries

Advanced MXP-650 2.5A 24V EN54-4 PSE Battery Charger - Large Up To 2x 17Ah BatteriesThe Advanced MXP-650 is a 2.5A power supply unit which can be used for any fire alarm system including AOV systems. They are certified to EN54-4 by VdS and EN12101-10 by AFNOR ensuring reliable and safe operation.Suited for almost any application the power supply unit and battery charger have been developed using the latest technology to provide a high-efficiency switch-mode power supply.The units include intelligent battery charging technology mains and battery monitoring including two independent volt-free outputs. In addition they also provide deep battery discharge protection in case of a prolonged mains failure.The inclusion of LED indicators provides quick status diagnostics of the power supply.These power supply units compliment the MXP-549 1.5A model.Key Features2.5A outputHousing fits 2 x 17Ah batteriesA range of power supply equipment with power output options to suit most applicationsUniversal AC inputIndependently monitored dual outputs of 27.6VdcHigh-efficiency switched mode power suppliesAlternative enclosure sizes to support standby battery backup optionsExterior status LEDs to support diagnosticsLoad-sharing supporting either rapid charging or brief high-current peak-loadsNo output interruption during automatic switchover between mains and battery powerDeep discharge protection disconnects battery from load when output voltage falls below 21.6VSelf-resetting battery fuse protection

GBP 263.58
1

Advanced MXP-650D 2.5A 24V EN54-4 PSE amp Battery Charger - Deep Up to 2x 24Ah or 38Ah Batteries

Advanced MXP-650D 2.5A 24V EN54-4 PSE amp Battery Charger - Deep Up to 2x 24Ah or 38Ah Batteries

Advanced MXP-650D 2.5A 24V EN54-4 PSE Battery Charger - Deep Up to 2x 24Ah or 38Ah BatteriesThe Advanced MXP-650 is a 2.5A power supply unit which can be used for any fire alarm system including AOV systems. They are certified to EN54-4 by VdS and EN12101-10 by AFNOR ensuring reliable and safe operation.Suited for almost any application the power supply unit and battery charger have been developed using the latest technology to provide a high-efficiency switch-mode power supply.The units include intelligent battery charging technology mains and battery monitoring including two independent volt-free outputs. In addition they also provide deep battery discharge protection in case of a prolonged mains failure.The inclusion of LED indicators provides quick status diagnostics of the power supply.These power supply units compliment the MXP-549 1.5A model.Key Features2.5A outputHousing fits 2x 24Ah or 38Ah batteriesA range of power supply equipment with power output options to suit most applicationsUniversal AC inputIndependently monitored dual outputs of 27.6VdcHigh-efficiency switched mode power suppliesAlternative enclosure sizes to support standby battery backup optionsExterior status LEDs to support diagnosticsLoad-sharing supporting either rapid charging or brief high-current peak-loadsNo output interruption during automatic switchover between mains and battery powerDeep discharge protection disconnects battery from load when output voltage falls below 21.6VSelf-resetting battery fuse protectionThe image is for illustrative purposes only.

GBP 313.84
1

Advanced GO1V Go 1 Loop Addressable Fire Alarm Panel Argus 50 Addresses

Advanced GO1V Go 1 Loop Addressable Fire Alarm Panel Argus 50 Addresses

Advanced GO1V Go 1 Loop Addressable Fire Alarm Panel Argus 50 AddressesThe new Go series is an evolution for non-networked single-loop fire alarm systems. Its innovative design includes several improvements and upgrades to critical safety features while retaining all the benefits and user-friendly operation of an Advanced fire alarm control panel.The control panel now features an ergonomic layout and a high-resolution high-contrast graphical LCD display. The tactile keypad enables simple select-and-click programming making configuration faster for engineers and operation easier for end-users.Offering two performance options Go and Go the series provides different maximum numbers of configurable addresses ensuring greater flexibility for site-specific installations.Functional improvements include integral zonal LEDs which enable instant identification of alarm locations and ensure compliance with BS5839 without the cost of a separate LED zone card.The new PCB integrates both control panel and peripherals on the same board and incorporates the latest high-speed microprocessor technology for 9 times faster operation than MxPro 4.With powerful cause-and-effect programming and enhanced trace diagnostics the panel is ideal for a variety of applications from small to medium systems.Every Go series panel is fully programmable on-site through the control panel display or our updated user-friendly PC Configuration Tool.Key FeaturesMultiprotocol support Apollo Discovery XP95 Hochiki ESP Argus VEGAGraphical LCD user interface LED indicators push buttonsInstaller-friendly Auto-learn Loop detection and On-board scope facility500 fire 5000 general event logging with advanced diagnostic precision to aid installation fault-findingIntegral 15 Zone LEDs ensures compliance with BS5839 with35 additional software indication zonesUses a new Configuration Tool with Office365 appearance with better graphics and easier functions for programmingTwo on-board Sounder outputs three on-board Relay outputsOptional 3 monitored inputoutputs for FireFault routing with P-Bus adaptor routing card for full EN54 compliance when connected to an Alarm Receiving CentreDedicated USB Type B port for direct PC connectionFuture ethernet connectivity to AdvancedLive which will provide remote notification and panel managementInnovative no hinge removable door and hangable chassis for easier installationEmploying an identical monitoring feature as the Mx-5000 series the Go series meets the requirements of EN54-13 2005 Clauses 5.3.4.1 and 5.3.4.2 partial open short circuits for optimal fire system performance and complete peace of mind

GBP 530.18
1

Advanced GO1V Go 1 Loop Addressable Fire Alarm Panel Argus 240 Addresses

Advanced GO1V Go 1 Loop Addressable Fire Alarm Panel Argus 240 Addresses

Advanced GO1V Go 1 Loop Addressable Fire Alarm Panel Argus 240 AddressesThe new Go series is an evolution for non-networked single-loop fire alarm systems. Its innovative design includes several improvements and upgrades to critical safety features while retaining all the benefits and user-friendly operation of an Advanced fire alarm control panel.The control panel now features an ergonomic layout and a high-resolution high-contrast graphical LCD display. The tactile keypad enables simple select-and-click programming making configuration faster for engineers and operation easier for end-users.Offering two performance options Go and Go the series provides different maximum numbers of configurable addresses ensuring greater flexibility for site-specific installations.Functional improvements include integral zonal LEDs which enable instant identification of alarm locations and ensure compliance with BS5839 without the cost of a separate LED zone card.The new PCB integrates both control panel and peripherals on the same board and incorporates the latest high-speed microprocessor technology for 9 times faster operation than MxPro 4.With powerful cause-and-effect programming and enhanced trace diagnostics the panel is ideal for a variety of applications from small to medium systems.Every Go series panel is fully programmable on-site through the control panel display or our updated user-friendly PC Configuration Tool.Key FeaturesMultiprotocol support Apollo Discovery XP95 Hochiki ESP Argus VEGAGraphical LCD user interface LED indicators push buttonsInstaller-friendly Auto-learn Loop detection and On-board scope facility500 fire 5000 general event logging with advanced diagnostic precision to aid installation fault-findingIntegral 15 Zone LEDs ensures compliance with BS5839 with35 additional software indication zonesUses a new Configuration Tool with Office365 appearance with better graphics and easier functions for programmingTwo on-board Sounder outputs three on-board Relay outputsOptional 3 monitored inputoutputs for FireFault routing with P-Bus adaptor routing card for full EN54 compliance when connected to an Alarm Receiving CentreDedicated USB Type B port for direct PC connectionFuture ethernet connectivity to AdvancedLive which will provide remote notification and panel managementInnovative no hinge removable door and hangable chassis for easier installationEmploying an identical monitoring feature as the Mx-5000 series the Go series meets the requirements of EN54-13 2005 Clauses 5.3.4.1 and 5.3.4.2 partial open short circuits for optimal fire system performance and complete peace of mind

GBP 636.23
1

Advanced MXP-642 Commander BACnet Modbus IP Interface StandardBasic

Advanced MXP-642 Commander BACnet Modbus IP Interface StandardBasic

Advanced MXP-642 Commander BACnet Modbus IP Interface StandardBasicThe Advanced Commander is a powerful IP-based solution for customers requiring protocol translation between their Advanced Fire Control Equipment and a Building Management SystemBMS. The device can be used as a simple bridge between manufacturers components providing seamless integration and delivering guaranteed performance. The conversion protocols supported by the Advanced Commander are those generally found in use by the most common Building Management Systems on the market today and are currently BACNet or Modbus.The Advanced Commander supports up to 640 ObjectsTags of information which can be configured and passed between network components and delivered to the Building Managements Systems BMS using TCPIP technology. The Advanced Commander has powerful Windows- based software management suite built-in to provide engineers with the ability to write Cause Effect strategy check data logging calendar and timer functions. TCPIP connectivity permits the Advanced Commander to be located locally to the distributed network of Fire Control Panels but at the same time caters for remote programming and Building Management System BMS accessKey FeaturesBacNetModbus Protocol Integration640 Configurable ObjectTagsWindows-based ProgrammingPowerful IP ControllerConfigurable on a ZonePoint basis per Object for Fire Fault Alarm IsolationEngineer configurable over TCPIPSupports a single Ad-Net networkSmall CompactLow Voltage 12vDC - 24vDCPlease Note This unit requires MXP-510 BMS Interface.

GBP 2569.94
1

Advanced MXP-642C Commander BACnet Modbus IP Interface Configured

Advanced MXP-642C Commander BACnet Modbus IP Interface Configured

Advanced MXP-642C Commander BACnet Modbus IP Interface ConfiguredThe Advanced Commander is a powerful IP-based solution for customers requiring protocol translation between their Advanced Fire Control Equipment and a Building Management SystemBMS. The device can be used as a simple bridge between manufacturers components providing seamless integration and delivering guaranteed performance. The conversion protocols supported by the Advanced Commander are those generally found in use by the most common Building Management Systems on the market today and are currently BACNet or Modbus.The Advanced Commander supports up to 640 ObjectsTags of information which can be configured and passed between network components and delivered to the Building Managements Systems BMS using TCPIP technology. The Advanced Commander has powerful Windows- based software management suite built-in to provide engineers with the ability to write Cause Effect strategy check data logging calendar and timer functions. TCPIP connectivity permits the Advanced Commander to be located locally to the distributed network of Fire Control Panels but at the same time caters for remote programming and Building Management System BMS accessKey FeaturesBacNetModbus Protocol Integration640 Configurable ObjectTagsWindows-based ProgrammingPowerful IP ControllerConfigurable on a ZonePoint basis per Object for Fire Fault Alarm IsolationEngineer configurable over TCPIPSupports a single Ad-Net networkSmall CompactLow Voltage 12vDC - 24vDCConfigurable using specialised Cause EffectPlease Note This unit requires MXP-510 BMS Interface.

GBP 3253.97
1

Advanced SP-8629-00DFT EvacGo Controller in Deep Enclosure cw 1 Loop Card Expandable To 4 - Fault-Tolerant Network Card

Advanced SP-8629-00DFT EvacGo Controller in Deep Enclosure cw 1 Loop Card Expandable To 4 - Fault-Tolerant Network Card

Advanced SP-8629-00DFT EvacGo Controller in Deep Enclosure cw 1 Loop Card Expandable To 4 - Fault-Tolerant Network CardCombining robustness and reliability with speed and simplicity the evacuation alert system comes in a range of flexible formats with wired wireless and hybrid options available. The EvacGo panel is built using the industry- leading MxPro 5 panel technology and delivers proven performance quality and ease of use.The panel is supplied with 8 16 24 or 32 fire fighter evacuation alert areas as standard and is fully expandable from 1 to 4 loops. The panel includes the latest flash-based microprocessor technology and provides a simple at a glance overview of which evacuation zones are operating.The panel has a virtual display which enables the maintenance engineer to work remotely. The panel is suitable for a wide range of site applications from small to large buildings containing flats.It is fully programmable on site and all programming and servicing can be undertaken on a laptop connected to the EvacGo panel using Advanceds DynamixTools PC programming software.Key FeaturesModular constructionFully expandable from 1 to 4 loopsCan be customised on site if required via insert labelControl panel with latest dual flash-based microprocessor technologyRobust vandal-resistant steel enclosure with unique copy-protected keysVirtual screen for simple ease of use and remote programming and servicingDesigned to comply with the BS 8629 Code of PracticeFully programmable on site

GBP 3325.32
1

Advanced SP-8629-16-2C EvacGo Controller cw 1 Loop Card - 16 Evacuation Zones

Advanced SP-8629-16-2C EvacGo Controller cw 1 Loop Card - 16 Evacuation Zones

Advanced SP-8629-16-2C EvacGo Controller cw 1 Loop Card - 16 Evacuation ZonesCombining robustness and reliability with speed and simplicity the evacuation alert system comes in a range of flexible formats with wired wireless and hybrid options available. The EvacGo panel is built using the industry- leading MxPro 5 panel technology and delivers proven performance quality and ease of use.The panel is supplied with 8 16 24 or 32 fire fighter evacuation alert areas as standard and is fully expandable from 1 to 4 loops. The panel includes the latest flash-based microprocessor technology and provides a simple at a glance overview of which evacuation zones are operating.The panel has a virtual display which enables the maintenance engineer to work remotely. The panel is suitable for a wide range of site applications from small to large buildings containing flats.It is fully programmable on site and all programming and servicing can be undertaken on a laptop connected to the EvacGo panel using Advanceds DynamixTools PC programming software.Key FeaturesModular construction1 loop cardCan be customised on site if required via insert label16 evacuation zonesControl panel with latest dual flash-based microprocessor technologyRobust vandal-resistant steel enclosure with unique copy-protected keysVirtual screen for simple ease of use and remote programming and servicingDesigned to comply with the BS 8629 Code of PracticeFully programmable on site

GBP 8316.25
1

Advanced SP-8629-00FT EvacGo Controller cw 1 Loop Card Expandable To 4 - Fault-Tolerant Network Card

Advanced SP-8629-00FT EvacGo Controller cw 1 Loop Card Expandable To 4 - Fault-Tolerant Network Card

Advanced SP-8629-00FT EvacGo Controller cw 1 Loop Card Expandable To 4 - Fault-Tolerant Network CardCombining robustness and reliability with speed and simplicity the evacuation alert system comes in a range of flexible formats with wired wireless and hybrid options available. The EvacGo panel is built using the industry- leading MxPro 5 panel technology and delivers proven performance quality and ease of use.The panel is supplied with 8 16 24 or 32 fire fighter evacuation alert areas as standard and is fully expandable from 1 to 4 loops. The panel includes the latest flash-based microprocessor technology and provides a simple at a glance overview of which evacuation zones are operating.The panel has a virtual display which enables the maintenance engineer to work remotely. The panel is suitable for a wide range of site applications from small to large buildings containing flats.It is fully programmable on site and all programming and servicing can be undertaken on a laptop connected to the EvacGo panel using Advanceds DynamixTools PC programming software.Key FeaturesModular constructionFully expandable from 1 to 4 loopsCan be customised on site if required via insert labelControl panel with latest dual flash-based microprocessor technologyRobust vandal-resistant steel enclosure with unique copy-protected keysVirtual screen for simple ease of use and remote programming and servicingDesigned to comply with the BS 8629 Code of PracticeFully programmable on site

GBP 3265.74
1

Advanced SP-8629-16-2CFT EvacGo Controller cw 1 Loop Card - 16 Evacuation Zones - Fault Tolerant Network Card

Advanced SP-8629-16-2CFT EvacGo Controller cw 1 Loop Card - 16 Evacuation Zones - Fault Tolerant Network Card

Advanced SP-8629-16-2CFT EvacGo Controller cw 1 Loop Card - 16 Evacuation Zones - Fault Tolerant Network CardCombining robustness and reliability with speed and simplicity the evacuation alert system comes in a range of flexible formats with wired wireless and hybrid options available. The EvacGo panel is built using the industry- leading MxPro 5 panel technology and delivers proven performance quality and ease of use.The panel is supplied with 8 16 24 or 32 fire fighter evacuation alert areas as standard and is fully expandable from 1 to 4 loops. The panel includes the latest flash-based microprocessor technology and provides a simple at a glance overview of which evacuation zones are operating.The panel has a virtual display which enables the maintenance engineer to work remotely. The panel is suitable for a wide range of site applications from small to large buildings containing flats.It is fully programmable on site and all programming and servicing can be undertaken on a laptop connected to the EvacGo panel using Advanceds DynamixTools PC programming software.Key FeaturesModular construction1 loop cardCan be customised on site if required via insert label16 evacuation zonesControl panel with latest dual flash-based microprocessor technologyRobust vandal-resistant steel enclosure with unique copy-protected keysVirtual screen for simple ease of use and remote programming and servicingDesigned to comply with the BS 8629 Code of PracticeFully programmable on site

GBP 8900.66
1

Advanced SP-8629-16FT EvacGo Controller cw 1 Loop Card Expandable To 4 - Fault-Tolerant Network Card

Advanced SP-8629-16FT EvacGo Controller cw 1 Loop Card Expandable To 4 - Fault-Tolerant Network Card

Advanced SP-8629-16FT EvacGo Controller cw 1 Loop Card Expandable To 4 - Fault-Tolerant Network Card - 24 Evacuation ZonesCombining robustness and reliability with speed and simplicity the evacuation alert system comes in a range of flexible formats with wired wireless and hybrid options available. The EvacGo panel is built using the industry- leading MxPro 5 panel technology and delivers proven performance quality and ease of use.The panel is supplied with 8 16 24 or 32 fire fighter evacuation alert areas as standard and is fully expandable from 1 to 4 loops. The panel includes the latest flash-based microprocessor technology and provides a simple at a glance overview of which evacuation zones are operating.The panel has a virtual display which enables the maintenance engineer to work remotely. The panel is suitable for a wide range of site applications from small to large buildings containing flats.It is fully programmable on site and all programming and servicing can be undertaken on a laptop connected to the EvacGo panel using Advanceds DynamixTools PC programming software.Key FeaturesModular constructionFully expandable from 1 to 4 loopsCan be customised on site if required via insert labelSupplied with 8 16 24 or 32 fire fighter evacuation alert areas as standardControl panel with latest dual flash-based microprocessor technologyRobust vandal-resistant steel enclosure with unique copy-protected keysVirtual screen for simple ease of use and remote programming and servicingDesigned to comply with the BS 8629 Code of PracticeFully programmable on site

GBP 8900.66
1

Advanced SP-8629-32 EvacGo Controller cw 1 Loop Card Expandable To 4 and 32 Evacuation Zones

Advanced SP-8629-32 EvacGo Controller cw 1 Loop Card Expandable To 4 and 32 Evacuation Zones

Advanced SP-8629-32 EvacGo Controller cw 1 Loop Card Expandable To 4 and 32 Evacuation ZonesCombining robustness and reliability with speed and simplicity the evacuation alert system comes in a range of flexible formats with wired wireless and hybrid options available. The EvacGo panel is built using the industry- leading MxPro 5 panel technology and delivers proven performance quality and ease of use.The panel is supplied with 8 16 24 or 32 fire fighter evacuation alert areas as standard and is fully expandable from 1 to 4 loops. The panel includes the latest flash-based microprocessor technology and provides a simple at a glance overview of which evacuation zones are operating.The panel has a virtual display which enables the maintenance engineer to work remotely. The panel is suitable for a wide range of site applications from small to large buildings containing flats.It is fully programmable on site and all programming and servicing can be undertaken on a laptop connected to the EvacGo panel using Advanceds DynamixTools PC programming software.Key FeaturesModular constructionFully expandable from 1 to 4 loopsCan be customised on site if required via insert labelSupplied with 8 16 24 or 32 fire fighter evacuation alert areas as standardControl panel with latest dual flash-based microprocessor technologyRobust vandal-resistant steel enclosure with unique copy-protected keysVirtual screen for simple ease of use and remote programming and servicingDesigned to comply with the BS 8629 Code of PracticeFully programmable on site

GBP 10242.90
1

Advanced SP-8629-08FT EvacGo Controller cw 1 Loop Card Expandable To 4 - Fault-Tolerant Network Card

Advanced SP-8629-08FT EvacGo Controller cw 1 Loop Card Expandable To 4 - Fault-Tolerant Network Card

Advanced SP-8629-08FT EvacGo Controller cw 1 Loop Card Expandable To 4 - Fault-Tolerant Network Card - 8 Evacuation ZonesCombining robustness and reliability with speed and simplicity the evacuation alert system comes in a range of flexible formats with wired wireless and hybrid options available. The EvacGo panel is built using the industry- leading MxPro 5 panel technology and delivers proven performance quality and ease of use.The panel is supplied with 8 16 24 or 32 fire fighter evacuation alert areas as standard and is fully expandable from 1 to 4 loops. The panel includes the latest flash-based microprocessor technology and provides a simple at a glance overview of which evacuation zones are operating.The panel has a virtual display which enables the maintenance engineer to work remotely. The panel is suitable for a wide range of site applications from small to large buildings containing flats.It is fully programmable on site and all programming and servicing can be undertaken on a laptop connected to the EvacGo panel using Advanceds DynamixTools PC programming software.Key FeaturesModular constructionFully expandable from 1 to 4 loopsCan be customised on site if required via insert labelSupplied with 8 16 24 or 32 fire fighter evacuation alert areas as standardControl panel with latest dual flash-based microprocessor technologyRobust vandal-resistant steel enclosure with unique copy-protected keysVirtual screen for simple ease of use and remote programming and servicingDesigned to comply with the BS 8629 Code of PracticeFully programmable on site

GBP 7742.71
1

Advanced SP-8629-08 EvacGo Controller cw 1 Loop Card Expandable To 4 - 8 Evacuation Zones

Advanced SP-8629-08 EvacGo Controller cw 1 Loop Card Expandable To 4 - 8 Evacuation Zones

Advanced SP-8629-08 EvacGo Controller cw 1 Loop Card Expandable To 4 - 8 Evacuation ZonesCombining robustness and reliability with speed and simplicity the evacuation alert system comes in a range of flexible formats with wired wireless and hybrid options available. The EvacGo panel is built using the industry- leading MxPro 5 panel technology and delivers proven performance quality and ease of use.The panel is supplied with 8 16 24 or 32 fire fighter evacuation alert areas as standard and is fully expandable from 1 to 4 loops. The panel includes the latest flash-based microprocessor technology and provides a simple at a glance overview of which evacuation zones are operating.The panel has a virtual display which enables the maintenance engineer to work remotely. The panel is suitable for a wide range of site applications from small to large buildings containing flats.It is fully programmable on site and all programming and servicing can be undertaken on a laptop connected to the EvacGo panel using Advanceds DynamixTools PC programming software.Key FeaturesModular constructionFully expandable from 1 to 4 loopsCan be customised on site if required via insert labelSupplied with 8 16 24 or 32 fire fighter evacuation alert areas as standardControl panel with latest dual flash-based microprocessor technologyRobust vandal-resistant steel enclosure with unique copy-protected keysVirtual screen for simple ease of use and remote programming and servicingDesigned to comply with the BS 8629 Code of PracticeFully programmable on site

GBP 7158.30
1

Advanced SP-8629-24FT EvacGo Controller cw 1 Loop Card Expandable To 4 - Fault-Tolerant Network Card

Advanced SP-8629-24FT EvacGo Controller cw 1 Loop Card Expandable To 4 - Fault-Tolerant Network Card

Advanced SP-8629-24FT EvacGo Controller cw 1 Loop Card Expandable To 4 - Fault-Tolerant Network Card - 24 Evacuation ZonesCombining robustness and reliability with speed and simplicity the evacuation alert system comes in a range of flexible formats with wired wireless and hybrid options available. The EvacGo panel is built using the industry- leading MxPro 5 panel technology and delivers proven performance quality and ease of use.The panel is supplied with 8 16 24 or 32 fire fighter evacuation alert areas as standard and is fully expandable from 1 to 4 loops. The panel includes the latest flash-based microprocessor technology and provides a simple at a glance overview of which evacuation zones are operating.The panel has a virtual display which enables the maintenance engineer to work remotely. The panel is suitable for a wide range of site applications from small to large buildings containing flats.It is fully programmable on site and all programming and servicing can be undertaken on a laptop connected to the EvacGo panel using Advanceds DynamixTools PC programming software.Key FeaturesModular constructionFully expandable from 1 to 4 loopsCan be customised on site if required via insert labelSupplied with 8 16 24 or 32 fire fighter evacuation alert areas as standardControl panel with latest dual flash-based microprocessor technologyRobust vandal-resistant steel enclosure with unique copy-protected keysVirtual screen for simple ease of use and remote programming and servicingDesigned to comply with the BS 8629 Code of PracticeFully programmable on site

GBP 10055.80
1

Advanced SP-8629-32FT EvacGo Controller cw 1 Loop Card Expandable To 4 Fault-Tolerant Network Card

Advanced SP-8629-32FT EvacGo Controller cw 1 Loop Card Expandable To 4 Fault-Tolerant Network Card

Advanced SP-8629-32FT EvacGo Controller cw 1 Loop Card Expandable To 4 Fault-Tolerant Network CardCombining robustness and reliability with speed and simplicity the evacuation alert system comes in a range of flexible formats with wired wireless and hybrid options available. The EvacGo panel is built using the industry- leading MxPro 5 panel technology and delivers proven performance quality and ease of use.The panel is supplied with 8 16 24 or 32 fire fighter evacuation alert areas as standard and is fully expandable from 1 to 4 loops. The panel includes the latest flash-based microprocessor technology and provides a simple at a glance overview of which evacuation zones are operating.The panel has a virtual display which enables the maintenance engineer to work remotely. The panel is suitable for a wide range of site applications from small to large buildings containing flats.It is fully programmable on site and all programming and servicing can be undertaken on a laptop connected to the EvacGo panel using Advanceds DynamixTools PC programming software.Key FeaturesModular constructionFully expandable from 1 to 4 loopsCan be customised on site if required via insert labelSupplied with 8 16 24 or 32 fire fighter evacuation alert areas as standardControl panel with latest dual flash-based microprocessor technologyRobust vandal-resistant steel enclosure with unique copy-protected keysVirtual screen for simple ease of use and remote programming and servicingDesigned to comply with the BS 8629 Code of PracticeFully programmable on site

GBP 10827.30
1

Advanced SP-8629-24 EvacGo Controller cw 1 Loop Card Expandable To 4 - 24 Evacuation Zones

Advanced SP-8629-24 EvacGo Controller cw 1 Loop Card Expandable To 4 - 24 Evacuation Zones

Advanced SP-8629-24 EvacGo Controller cw 1 Loop Card Expandable To 4 - 24 Evacuation ZonesCombining robustness and reliability with speed and simplicity the evacuation alert system comes in a range of flexible formats with wired wireless and hybrid options available. The EvacGo panel is built using the industry- leading MxPro 5 panel technology and delivers proven performance quality and ease of use.The panel is supplied with 8 16 24 or 32 fire fighter evacuation alert areas as standard and is fully expandable from 1 to 4 loops. The panel includes the latest flash-based microprocessor technology and provides a simple at a glance overview of which evacuation zones are operating.The panel has a virtual display which enables the maintenance engineer to work remotely. The panel is suitable for a wide range of site applications from small to large buildings containing flats.It is fully programmable on site and all programming and servicing can be undertaken on a laptop connected to the EvacGo panel using Advanceds DynamixTools PC programming software.Key FeaturesModular constructionFully expandable from 1 to 4 loopsCan be customised on site if required via insert labelSupplied with 8 16 24 or 32 fire fighter evacuation alert areas as standardControl panel with latest dual flash-based microprocessor technologyRobust vandal-resistant steel enclosure with unique copy-protected keysVirtual screen for simple ease of use and remote programming and servicingDesigned to comply with the BS 8629 Code of PracticeFully programmable on site

GBP 9471.40
1

Advanced SP-8629-16 EvacGo Controller cw 1 Loop Card Expandable To 4 - 16 Evacuation Zones

Advanced SP-8629-16 EvacGo Controller cw 1 Loop Card Expandable To 4 - 16 Evacuation Zones

Advanced SP-8629-16 EvacGo Controller cw 1 Loop Card Expandable To 4 - 16 Evacuation ZonesCombining robustness and reliability with speed and simplicity the evacuation alert system comes in a range of flexible formats with wired wireless and hybrid options available. The EvacGo panel is built using the industry- leading MxPro 5 panel technology and delivers proven performance quality and ease of use.The panel is supplied with 8 16 24 or 32 fire fighter evacuation alert areas as standard and is fully expandable from 1 to 4 loops. The panel includes the latest flash-based microprocessor technology and provides a simple at a glance overview of which evacuation zones are operating.The panel has a virtual display which enables the maintenance engineer to work remotely. The panel is suitable for a wide range of site applications from small to large buildings containing flats.It is fully programmable on site and all programming and servicing can be undertaken on a laptop connected to the EvacGo panel using Advanceds DynamixTools PC programming software.Key FeaturesModular constructionFully expandable from 1 to 4 loopsCan be customised on site if required via insert labelSupplied with 8 16 24 or 32 fire fighter evacuation alert areas as standardControl panel with latest dual flash-based microprocessor technologyRobust vandal-resistant steel enclosure with unique copy-protected keysVirtual screen for simple ease of use and remote programming and servicingDesigned to comply with the BS 8629 Code of PracticeFully programmable on site

GBP 8316.25
1

Advanced Lux Intelligent ELEDM3PSGAU Exi-LED Wall Mounted 3 Hour Maintained Exit Sign with SilverGrey Finish Arrow Up

Advanced Lux Intelligent ELEDM3PSGAU Exi-LED Wall Mounted 3 Hour Maintained Exit Sign with SilverGrey Finish Arrow Up

Advanced Lux Intelligent ELEDM3PSGAU Exi-LED Wall Mounted 3 Hour Maintained Exit Sign with SilverGrey Finish Arrow UpThe Exi-LED exit sign is a reliable attractive product that offers excellent performance with long life and low energy benefits. Its slim but robust welded steel housing available in a selection of finishes provides a picture frame appearance around the brightly lit exit legend. These legends are available with a choice of directions and formats European or ISO.Although smaller than conventional fluorescent exit signs the Exi-LED still provides a useful 25 metre viewing distance in both mains and emergency modes with 15 high brightness white LEDs and state of the art reflector. The Exi-LED fully supports all features of the Lux Intelligent test system and complies with all the relevant requirements of EN60598.2.22.OperationThe Exi-LED panel features matrix dot coating to ensure the LEDs evenly illuminate the safety sign legend. Standard luminaires are supplied with integral maintained emergency control gear which in the event of a power failure will ensure the exit sign continues to operate with the same sign luminance for 3 Hours from the internal NiMH battery.InstallationThe Exi-LED mounts on the wall using simple keyhole slots or via the central BESA entry. The front cover simply hooks onto the back plate and is retained with a single fixture located centrally on the base.Key FeaturesFully compatible with LuxIntelligent test systemLong life and low energy performanceSleek stylish designFully complies with all aspects of EN60598.2.22Please Note Although listed under Emergency Lighting the 230v version is not an emergency light and should not be used as one. The 230v version is only for use as a standard light fitting.

GBP 272.97
1

Advanced Lux Intelligent ELEDM3PSGAR Exi-LED Wall Mounted 3 Hour Maintained Exit Sign with SilverGrey Finish Arrow Right

Advanced Lux Intelligent ELEDM3PSGAR Exi-LED Wall Mounted 3 Hour Maintained Exit Sign with SilverGrey Finish Arrow Right

Advanced Lux Intelligent ELEDM3PSGAR Exi-LED Wall Mounted 3 Hour Maintained Exit Sign with SilverGrey Finish Arrow RightThe Exi-LED exit sign is a reliable attractive product that offers excellent performance with long life and low energy benefits. Its slim but robust welded steel housing available in a selection of finishes provides a picture frame appearance around the brightly lit exit legend. These legends are available with a choice of directions and formats European or ISO.Although smaller than conventional fluorescent exit signs the Exi-LED still provides a useful 25 metre viewing distance in both mains and emergency modes with 15 high brightness white LEDs and state of the art reflector. The Exi-LED fully supports all features of the Lux Intelligent test system and complies with all the relevant requirements of EN60598.2.22.OperationThe Exi-LED panel features matrix dot coating to ensure the LEDs evenly illuminate the safety sign legend. Standard luminaires are supplied with integral maintained emergency control gear which in the event of a power failure will ensure the exit sign continues to operate with the same sign luminance for 3 Hours from the internal NiMH battery.InstallationThe Exi-LED mounts on the wall using simple keyhole slots or via the central BESA entry. The front cover simply hooks onto the back plate and is retained with a single fixture located centrally on the base.Key FeaturesFully compatible with LuxIntelligent test systemLong life and low energy performanceSleek stylish designFully complies with all aspects of EN60598.2.22Please Note Although listed under Emergency Lighting the 230v version is not an emergency light and should not be used as one. The 230v version is only for use as a standard light fitting.

GBP 272.97
1

Advanced Lux Intelligent ELEDM3PSGAL Exi-LED Wall Mounted 3 Hour Maintained Exit Sign with SilverGrey Finish Arrow Left

Advanced Lux Intelligent ELEDM3PSGAL Exi-LED Wall Mounted 3 Hour Maintained Exit Sign with SilverGrey Finish Arrow Left

Advanced Lux Intelligent ELEDM3PSGAL Exi-LED Wall Mounted 3 Hour Maintained Exit Sign with SilverGrey Finish Arrow LeftThe Exi-LED exit sign is a reliable attractive product that offers excellent performance with long life and low energy benefits. Its slim but robust welded steel housing available in a selection of finishes provides a picture frame appearance around the brightly lit exit legend. These legends are available with a choice of directions and formats European or ISO.Although smaller than conventional fluorescent exit signs the Exi-LED still provides a useful 25 metre viewing distance in both mains and emergency modes with 15 high brightness white LEDs and state of the art reflector. The Exi-LED fully supports all features of the Lux Intelligent test system and complies with all the relevant requirements of EN60598.2.22.OperationThe Exi-LED panel features matrix dot coating to ensure the LEDs evenly illuminate the safety sign legend. Standard luminaires are supplied with integral maintained emergency control gear which in the event of a power failure will ensure the exit sign continues to operate with the same sign luminance for 3 Hours from the internal NiMH battery.InstallationThe Exi-LED mounts on the wall using simple keyhole slots or via the central BESA entry. The front cover simply hooks onto the back plate and is retained with a single fixture located centrally on the base.Key FeaturesFully compatible with LuxIntelligent test systemLong life and low energy performanceSleek stylish designFully complies with all aspects of EN60598.2.22Please Note Although listed under Emergency Lighting the 230v version is not an emergency light and should not be used as one. The 230v version is only for use as a standard light fitting.

GBP 272.97
1

Advanced Lux Intelligent ELEDM3PBKAU Exi-LED Wall Mounted 3 Hour Maintained Exit Sign with White Finish Arrow Up

Advanced Lux Intelligent ELEDM3PBKAU Exi-LED Wall Mounted 3 Hour Maintained Exit Sign with White Finish Arrow Up

Advanced Lux Intelligent ELEDM3PBKAU Exi-LED Wall Mounted 3 Hour Maintained Exit Sign with White Finish Arrow UpThe Exi-LED exit sign is a reliable attractive product that offers excellent performance with long life and low energy benefits. Its slim but robust welded steel housing available in a selection of finishes provides a picture frame appearance around the brightly lit exit legend. These legends are available with a choice of directions and formats European or ISO.Although smaller than conventional fluorescent exit signs the Exi-LED still provides a useful 25 metre viewing distance in both mains and emergency modes with 15 high brightness white LEDs and state of the art reflector. The Exi-LED fully supports all features of the Lux Intelligent test system and complies with all the relevant requirements of EN60598.2.22.OperationThe Exi-LED panel features matrix dot coating to ensure the LEDs evenly illuminate the safety sign legend. Standard luminaires are supplied with integral maintained emergency control gear which in the event of a power failure will ensure the exit sign continues to operate with the same sign luminance for 3 Hours from the internal NiMH battery.InstallationThe Exi-LED mounts on the wall using simple keyhole slots or via the central BESA entry. The front cover simply hooks onto the back plate and is retained with a single fixture located centrally on the base.Key FeaturesFully compatible with LuxIntelligent test systemLong life and low energy performanceSleek stylish designFully complies with all aspects of EN60598.2.22Please Note Although listed under Emergency Lighting the 230v version is not an emergency light and should not be used as one. The 230v version is only for use as a standard light fitting.

GBP 348.85
1

Advanced Lux Intelligent ELEDM3PAR Exi-LED Wall Mounted 3 Hour Maintained Exit Sign with White Finish Arrow Right

Advanced Lux Intelligent ELEDM3PAR Exi-LED Wall Mounted 3 Hour Maintained Exit Sign with White Finish Arrow Right

Advanced Lux Intelligent ELEDM3PAR Exi-LED Wall Mounted 3 Hour Maintained Exit Sign with White Finish Arrow RightThe Exi-LED exit sign is a reliable attractive product that offers excellent performance with long life and low energy benefits. Its slim but robust welded steel housing available in a selection of finishes provides a picture frame appearance around the brightly lit exit legend. These legends are available with a choice of directions and formats European or ISO.Although smaller than conventional fluorescent exit signs the Exi-LED still provides a useful 25 metre viewing distance in both mains and emergency modes with 15 high brightness white LEDs and state of the art reflector. The Exi-LED fully supports all features of the Lux Intelligent test system and complies with all the relevant requirements of EN60598.2.22.OperationThe Exi-LED panel features matrix dot coating to ensure the LEDs evenly illuminate the safety sign legend. Standard luminaires are supplied with integral maintained emergency control gear which in the event of a power failure will ensure the exit sign continues to operate with the same sign luminance for 3 Hours from the internal NiMH battery.InstallationThe Exi-LED mounts on the wall using simple keyhole slots or via the central BESA entry. The front cover simply hooks onto the back plate and is retained with a single fixture located centrally on the base.Key FeaturesFully compatible with LuxIntelligent test systemLong life and low energy performanceSleek stylish designFully complies with all aspects of EN60598.2.22Please Note although listed under Emergency Lighting the 230v version is not an emergency light and should not be used as one. The 230v version is only for use as a standard light fitting.

GBP 348.85
1

Advanced Lux Intelligent ELEDM3PAL Exi-LED Wall Mounted 3 Hour Maintained Exit Sign with White Finish Arrow Left

Advanced Lux Intelligent ELEDM3PAL Exi-LED Wall Mounted 3 Hour Maintained Exit Sign with White Finish Arrow Left

Advanced Lux Intelligent ELEDM3PAL Exi-LED Wall Mounted 3 Hour Maintained Exit Sign with White Finish Arrow LeftThe Exi-LED exit sign is a reliable attractive product that offers excellent performance with long life and low energy benefits. Its slim but robust welded steel housing available in a selection of finishes provides a picture frame appearance around the brightly lit exit legend. These legends are available with a choice of directions and formats European or ISO.Although smaller than conventional fluorescent exit signs the Exi-LED still provides a useful 25 metre viewing distance in both mains and emergency modes with 15 high brightness white LEDs and state of the art reflector. The Exi-LED fully supports all features of the Lux Intelligent test system and complies with all the relevant requirements of EN60598.2.22.OperationThe Exi-LED panel features matrix dot coating to ensure the LEDs evenly illuminate the safety sign legend. Standard luminaires are supplied with integral maintained emergency control gear which in the event of a power failure will ensure the exit sign continues to operate with the same sign luminance for 3 Hours from the internal NiMH battery.InstallationThe Exi-LED mounts on the wall using simple keyhole slots or via the central BESA entry. The front cover simply hooks onto the back plate and is retained with a single fixture located centrally on the base.Key FeaturesFully compatible with LuxIntelligent test systemLong life and low energy performanceSleek stylish designFully complies with all aspects of EN60598.2.22Please Note Although listed under Emergency Lighting the 230v version is not an emergency light and should not be used as one. The 230v version is only for use as a standard light fitting.

GBP 348.85
1