248 results (0,16024 seconds)

Show all filters

Brand

Merchant

Price (EUR)

Reset filter

Products
From
Shops

Advanced MxPro 5 MX-5010 Remote Display Terminal with Standard Network

Advanced MxPro 5 MX-5010 Remote Display Terminal with Standard Network

Advanced MxPro 5 MX-5010 Remote Display Terminal with Standard NetworkThe remote terminals utilise the same graphical LCD user interface that can be found on the MxPro 5 series fire panels and are based upon the same advanced flash based microprocessor technology. The MxPro 5 panels and remote terminals can communicate over the same 2-core network cable. They feature an integral network interface incorporating a special screen termination to prevent mains frequency earth-loop currents flowing between network nodes.The Ad-NeT network operates as a true peer-to-peer system with full cross panel reporting control and cause-and-effect functionality of up to 2000 zones. All remote terminals incorporate buzzer mute view enabledisable and test facilities with dedicated system and navigation keys for simple user control.The display information is fully programmable by individual zone or sector and can display any combination of fires faults pre-alarms or plant alarms. E.g. can display all information in its own sector but can only show fire signals from other sectors of a building.Key FeaturesProgrammable switch inputGraphical LCD DisplayAd-NeTAd-NeT CompatibleSlide-in LabelsSmall Robust compact24V DC Operating voltage3 Year WarrantyDisableenable options

GBP 636.48
1

Advanced MxPro 5 MX-5010FT Remote Display Terminal with Fault Tolerant Network

Advanced MxPro 5 MX-5010FT Remote Display Terminal with Fault Tolerant Network

Advanced MxPro 5 MX-5010FT Remote Display Terminal with Fault Tolerant NetworkThe remote terminals utilise the same graphical LCD user interface that can be found on the MxPro 5 series fire panels and are based upon the same advanced flash based microprocessor technology. The MxPro 5 panels and remote terminals can communicate over the same 2-core network cable. They feature an integral network interface incorporating a special screen termination to prevent mains frequency earth-loop currents flowing between network nodes.The Ad-NeT network operates as a true peer-to-peer system with full cross panel reporting control and cause-and-effect functionality of up to 2000 zones. All remote terminals incorporate buzzer mute view enabledisable and test facilities with dedicated system and navigation keys for simple user control.The display information is fully programmable by individual zone or sector and can display any combination of fires faults pre-alarms or plant alarms. E.g. can display all information in its own sector but can only show fire signals from other sectors of a building.Key FeaturesProgrammable switch inputGraphical LCD DisplayAd-NeTAd-NeT CompatibleSlide-in LabelsSmall Robust compact24V DC Operating voltage3 Year WarrantyDisableenable options

GBP 1198.82
1

Advanced MxPro 4 MX-4010 Remote Display Terminal with Standard Network Interface

Advanced MxPro 4 MX-4010 Remote Display Terminal with Standard Network Interface

Advanced MxPro 4 MX-4010 Remote Display Terminal with Standard Network InterfaceBased around two core products the MxPro 4 Remote Display Terminal RDT and the fully functional MxPro 4 Remote Control Terminal RCT both utilise the same graphical LCD user interface that can be found on the MxPro 4 series fire panels and are based upon the same advanced flash based microprocessor technology.All MxPro 4 series panels and remote terminals can communicate over the same 2-core network cable. Integral network interface incorporating a special screen termination to prevent mains frequency earth-loop currents flowing between network nodes. The Ad-NeT network operates as a true peer-to-peer system with full cross panel reporting control and cause and effect functionality of up to 1000 zones.Key FeaturesNetworked for System DisplayNetworked for System Control24V DC Operating Voltage3 Year warrantyGraphical LCD DisplayAd-NeTAd-NeT CompatibleSmall Robust

GBP 746.17
1

Advanced MxPro 4 MX-4010FT Remote Display Terminal with Fault Tolerant Network Interface

Advanced MxPro 4 MX-4010FT Remote Display Terminal with Fault Tolerant Network Interface

Advanced MxPro 4 MX-4010FT Remote Display Terminal with Fault Tolerant Network InterfaceBased around two core products the MxPro 4 Remote Display Terminal RDT and the fully functional MxPro 4 Remote Control Terminal RCT both utilise the same graphical LCD user interface that can be found on the MxPro 4 series fire panels and are based upon the same advanced flash based microprocessor technology.All MxPro 4 series panels and remote terminals can communicate over the same 2-core network cable. Integral network interface incorporating a special screen termination to prevent mains frequency earth-loop currents flowing between network nodes. The Ad-NeT network operates as a true peer-to-peer system with full cross panel reporting control and cause and effect functionality of up to 1000 zones.Key FeaturesNetworked for System DisplayNetworked for System Control24V DC Operating Voltage3 Year warrantyGraphical LCD DisplayAd-NeTAd-NeT CompatibleSmall Robust

GBP 1455.28
1

Advanced MxPro 5 MX-5020 Remote Control Terminal with Standard Network

Advanced MxPro 5 MX-5020 Remote Control Terminal with Standard Network

Advanced MxPro 5 MX-5020 Remote Control Terminal with Standard NetworkThe remote terminals utilise the same graphical LCD user interface that can be found on the MxPro 5 series fire panels and are based upon the same advanced flash based microprocessor technology. The MxPro 5 panels and remote terminals can communicate over the same 2-core network cable. They feature an integral network interface incorporating a special screen termination to prevent mains frequency earth-loop currents flowing between network nodes.The Ad-NeT network operates as a true peer-to-peer system with full cross panel reporting control and cause-and-effect functionality of up to 2000 zones. All remote terminals incorporate buzzer mute view enabledisable and test facilities with dedicated system and navigation keys for simple user control. The display information is fully programmable by individual zone or sector and can display any combination of fires faults pre-alarms or plant alarms. E.g. can display all information in its own sector but can only show fire signals from other sectors of a building.Key FeaturesProgrammable switch inputGraphical LCD DisplayAd-NeTAd-NeT CompatibleSlide-in LabelsSmall robust compact24V DC Operating voltage3 Year WarrantyDisableenable options

GBP 786.18
1

Advanced MxPro 5 MX-5020FT Remote Control Terminal with Fault Tolerant Network

Advanced MxPro 5 MX-5020FT Remote Control Terminal with Fault Tolerant Network

Advanced MxPro 5 MX-5020FT Remote Control Terminal with Fault Tolerant NetworkThe remote terminals utilise the same graphical LCD user interface that can be found on the MxPro 5 series fire panels and are based upon the same advanced flash based microprocessor technology. The MxPro 5 panels and remote terminals can communicate over the same 2-core network cable. They feature an integral network interface incorporating a special screen termination to prevent mains frequency earth-loop currents flowing between network nodes.The Ad-NeT network operates as a true peer-to-peer system with full cross panel reporting control and cause-and-effect functionality of up to 2000 zones. All remote terminals incorporate buzzer mute view enabledisable and test facilities with dedicated system and navigation keys for simple user control. The display information is fully programmable by individual zone or sector and can display any combination of fires faults pre-alarms or plant alarms. E.g. can display all information in its own sector but can only show fire signals from other sectors of a building.Key FeaturesProgrammable switch inputGraphical LCD DisplayAd-NeTAd-NeT CompatibleSlide-in LabelsSmall robust compact24V DC Operating voltage3 Year WarrantyDisableenable options

GBP 1348.54
1

Advanced MxPro 5 MX-5030FT Remote Control Terminal Fault Tolerant Network with Large Enclosure

Advanced MxPro 5 MX-5030FT Remote Control Terminal Fault Tolerant Network with Large Enclosure

Advanced MxPro 5 MX-5030FT Remote Control Terminal Fault Tolerant Network with Large EnclosureThe remote terminals utilise the same graphical LCD user interface that can be found on the MxPro 5 series fire panels and are based upon the same advanced flash based microprocessor technology. The MxPro 5 panels and remote terminals can communicate over the same 2-core network cable. They feature an integral network interface incorporating a special screen termination to prevent mains frequency earth-loop currents flowing between network nodes.The Ad-NeT network operates as a true peer-to-peer system with full cross panel reporting control and cause-and-effect functionality of up to 2000 zones. All remote terminals incorporate buzzer mute view enabledisable and test facilities with dedicated system and navigation keys for simple user control. The display information is fully programmable by individual zone or sector and can display any combination of fires faults pre-alarms or plant alarms. E.g. can display all information in its own sector but can only show fire signals from other sectors of a building.Key FeaturesProgrammable switch inputGraphical LCD DisplayAd-NeTAd-NeT CompatibleSlide-in LabelsSmall robust compact24V DC Operating voltage3 Year WarrantyDisableenable options

GBP 1521.97
1

Advanced MxPro 5 MX-5030 Remote Control Terminal Standard Network with Large Enclosure

Advanced MxPro 5 MX-5030 Remote Control Terminal Standard Network with Large Enclosure

Advanced MxPro 5 MX-5030 Remote Control Terminal Standard Network with Large EnclosureThe remote terminals utilise the same graphical LCD user interface that can be found on the MxPro 5 series fire panels and are based upon the same advanced flash based microprocessor technology. The MxPro 5 panels and remote terminals can communicate over the same 2-core network cable. They feature an integral network interface incorporating a special screen termination to prevent mains frequency earth-loop currents flowing between network nodes.The Ad-NeT network operates as a true peer-to-peer system with full cross panel reporting control and cause-and-effect functionality of up to 2000 zones. All remote terminals incorporate buzzer mute view enabledisable and test facilities with dedicated system and navigation keys for simple user control. The display information is fully programmable by individual zone or sector and can display any combination of fires faults pre-alarms or plant alarms. E.g. can display all information in its own sector but can only show fire signals from other sectors of a building.Key FeaturesProgrammable switch inputGraphical LCD DisplayAd-NeTAd-NeT CompatibleSlide-in LabelsSmall robust compact24V DC Operating voltage3 Year WarrantyDisableenable options

GBP 961.03
1

Advanced LL-PGR Lifeline Vibrating Rechargeable Pager with USB Charger

Advanced LL-PGR Lifeline Vibrating Rechargeable Pager with USB Charger

Advanced LL-PGR Lifeline Vibrating Rechargeable Pager with USB ChargerThe LifeLine rechargeable pager is an alphanumeric pager with a large TFT colour display which displays easy-to-follow icons and twenty-five characters of text on up to six lines. The handheld battery-operated pager is specifically programmed to work supporting all the features of the LifeLine system in order meet the relevant standards.The pager is easy to use with six large buttons forming the user interface. Two of the buttons are soft keys menu driven from the display to allow quick and easy access to messages.Features include various tone and vibration settings and a selection of individual alarms an operator can set with all messages date and time stamped. The device also has a separate status LED in the top right-hand corner. When the pager receives a message the status LED will illuminate for five second along with an audibletactile alert. The device can store up to 200 messages and when full the oldest message will be removed to make room for the latest.The rechargeable Lithium battery is capable of providing up to ten days operation in standby mode and the display also includes a voltage level indicator. The recharging function is provided via a 5V mini-USB port.The pager comes complete with a belt holster charging cable and plug.There is no limit to the number of pagers that can be used with a LifeLine panel and each pager has its own identity for installation.Key FeaturesSupports all features of the LifeLine pager panelLarge TFT Colour display 2.2 Inch 320 240 pixelsRechargeable battery via 5V mini-USB PortUp to 10 Days battery life in standbyBattery Level IndicatorSelection of vibration and tone alert

GBP 462.60
1

Advanced LL-PGR-01 Lifeline Vibrating Rechargeable Pager with Out of Range Enabled and Charger

Advanced LL-PGR-01 Lifeline Vibrating Rechargeable Pager with Out of Range Enabled and Charger

Advanced LL-PGR-01 Lifeline Vibrating Rechargeable Pager with Out of Range Enabled and ChargerThe LifeLine rechargeable pager is an alphanumeric pager with a large TFT colour display which displays easy-to-follow icons and twenty-five characters of text on up to six lines. The handheld battery-operated pager is specifically programmed to work supporting all the features of the LifeLine system in order meet the relevant standards.The pager is easy to use with six large buttons forming the user interface. Two of the buttons are soft keys menu driven from the display to allow quick and easy access to messages.Features include various tone and vibration settings and a selection of individual alarms an operator can set with all messages date and time stamped. The device also has a separate status LED in the top right-hand corner. When the pager receives a message the status LED will illuminate for five second along with an audibletactile alert. The device can store up to 200 messages and when full the oldest message will be removed to make room for the latest.The rechargeable Lithium battery is capable of providing up to ten days operation in standby mode and the display also includes a voltage level indicator. The recharging function is provided via a 5V mini-USB port.The pager comes complete with a belt holster charging cable and plug.There is no limit to the number of pagers that can be used with a LifeLine panel and each pager has its own identity for installation.Key FeaturesSupports all features of the LifeLine pager panelLarge TFT Colour display 2.2 Inch 320 240 pixelsRechargeable battery via 5V mini-USB PortUp to 10 Days battery life in standbyBattery Level IndicatorSelection of vibration and tone alert

GBP 462.60
1

Advanced LL-PGR-02 Lifeline Engineering Vibrating Rechargeable Pager with USB Charger

Advanced LL-PGR-02 Lifeline Engineering Vibrating Rechargeable Pager with USB Charger

Advanced LL-PGR-02 Lifeline Engineering Vibrating Rechargeable Pager comes with USB ChargerThe LifeLine rechargeable pager is an alphanumeric pager with a large TFT colour display which displays easy-to-follow icons and twenty-five characters of text on up to six lines. The handheld battery-operated pager is specifically programmed to work supporting all the features of the LifeLine system in order meet the relevant standards.The pager is easy to use with six large buttons forming the user interface. Two of the buttons are soft keys menu driven from the display to allow quick and easy access to messages.Features include various tone and vibration settings and a selection of individual alarms an operator can set with all messages date and time stamped. The device also has a separate status LED in the top right-hand corner. When the pager receives a message the status LED will illuminate for five second along with an audibletactile alert. The device can store up to 200 messages and when full the oldest message will be removed to make room for the latest.The rechargeable Lithium battery is capable of providing up to ten days operation in standby mode and the display also includes a voltage level indicator. The recharging function is provided via a 5V mini-USB port.The pager comes complete with a belt holster charging cable and plug.There is no limit to the number of pagers that can be used with a LifeLine panel and each pager has its own identity for installation.Key FeaturesSupports all features of the LifeLine pager panelLarge TFT Colour display 2.2 Inch 320 240 pixelsRechargeable battery via 5V mini-USB PortUp to 10 Days battery life in standbyBattery Level IndicatorSelection of vibration and tone alert

GBP 462.60
1

Advanced MXP-013-050 50 Zone LED Card for MX-4200 4400 with Door amp Label Retro-Fit

Advanced MXP-013-050 50 Zone LED Card for MX-4200 4400 with Door amp Label Retro-Fit

Advanced MXP-013-050 50 Zone LED Card for MX-4200 4400 with Door Label Retro-FitThe Zonal LED indicator cards are a range of panel mounted peripheral modules that can be added to the MxPro 4 series of control panels. The display cards are available in numerous configurations and provide individual indication of the zones in fire.The units fully support dynamic zoning on networked or larger stand-alone systems and can be used to provide individual zonal LED indication at one location. 20 zone units are available which are fitted to the front display plate on the MxPro 4 series control panel. The Mxp-013-050F Mxp-013-100F and Mxp-013-200F incorporate 50 100 or 200 LED indicators respectively and are compatible with all MxPro 4 series multiloop panels.FeaturesThe cards are capable of simultaneously displaying all zones in a fire condition and incorporate a unique power saving feature to minimise the power drawn from the control panel in the event of a major fire. Several other options are also available within the MxPro 4 range for applications where indication of fire signals from zones in addition to the panels graphical display is required. These options include Advanced Mimic Units graphical systems and printers.Key FeaturesUp to 200 zones available3 year warranty as standardFactory fitted or retro fitDynamic zoningCost effective against ancillary hardware

GBP 355.63
1

Advanced MXP-024 MxPro 20 Zone LED Card for MX-4100

Advanced MXP-024 MxPro 20 Zone LED Card for MX-4100

Advanced MXP-024 MxPro 20 Zone LED Card for MX-4100The Zonal LED indicator cards are a range of panel mounted peripheral modules that can be added to the MxPro 4 series of control panels. The display cards are available in numerous configurations and provide individual indication of the zones in fire.The units fully support dynamic zoning on networked or larger stand-alone systems and can be used to provide individual zonal LED indication at one location. 20 zone units are available which are fitted to the front display plate on the MxPro 4 series control panel. The Mxp-013-050F Mxp-013-100F and Mxp-013-200F incorporate 50 100 or 200 LED indicators respectively and are compatible with all MxPro 4 series multiloop panels.FeaturesThe cards are capable of simultaneously displaying all zones in a fire condition and incorporate a unique power saving feature to minimise the power drawn from the control panel in the event of a major fire. Several other options are also available within the MxPro 4 range for applications where indication of fire signals from zones in addition to the panels graphical display is required. These options include Advanced Mimic Units graphical systems and printers.Key FeaturesUp to 200 zones available3 year warranty as standardFactory fitted or retro fitDynamic zoningCost effective against ancillary hardware

GBP 76.08
1

Advanced MXP-013-100 MxPro 100 Zone LED Card for MX-4200 4400 4800 Retro-fit

Advanced MXP-013-100 MxPro 100 Zone LED Card for MX-4200 4400 4800 Retro-fit

AdvancedMXP-013-100MxPro 100 Zone LED Card for MX-4200 4400 4800 with Door Label Retro-fit -MXP-013-100The Zonal LED indicator cards are a range of panel mounted peripheral modules that can be added to the MxPro 4 series of control panels. The display cards are available in numerous configurations and provide individual indication of the zones in fire.The units fully support dynamic zoning on networked or larger stand-alone systems and can be used to provide individual zonal LED indication at one location. 20 zone units are available which are fitted to the front display plate on the MxPro 4 series control panel. The Mxp-013-050F Mxp-013-100F and Mxp-013-200F incorporate 50 100 or 200 LED indicators respectively and are compatible with all MxPro 4 series multiloop panels.FeaturesThe cards are capable of simultaneously displaying all zones in a fire condition and incorporate a unique power saving feature to minimise the power drawn from the control panel in the event of a major fire. Several other options are also available within the MxPro 4 range for applications where indication of fire signals from zones in addition to the panels graphical display is required. These options include Advanced Mimic Units graphical systems and printers.Key FeaturesUp to 200 zones available3 year warranty as standardFactory fitted or retro fitDynamic zoningCost effective against ancillary hardware

GBP 491.29
1

Advanced Remote Status Indicator LCD LED Indicators with Release Button Mode Select Key Switch EX-3031

Advanced Remote Status Indicator LCD LED Indicators with Release Button Mode Select Key Switch EX-3031

Advanced Remote Status Indicator LCD LED Indicators with Release Button Mode Select Key Switch EX-3031The Ex Remote Status Indicators are available in two formats a basic display only with optional key switches or a manual release version with optional keyswitch for automaticmanual mode. The Ex-extinguishing system detects a fire in the same manner as a fire alarm system but in addition to sounding alarms it also controls the release of an extinguishing agent.The extinguishing agent can take many forms from CO through to specialist gasses developed solely for extinguishing purposes. The agent is released into the atmosphere in the area where a fire has been detected reducing the density of oxygen in the atmosphere around the fire thus extinguishing the fire. The Ex-extinguishing system is used primarily in areas of significant valuestrategic importance to businesses e.g. computer suites telecom switch-rooms thus providing a cost effective solution to protect your work place.Key FeaturesSmall and compactRS485 network portOptional manual release or display onlySurface mount or semi-flush optionUp to 7 remote status indicators per one ExGo 1 loop panel3 year warranty as standardKey switch option for mode select or enable controlsMultiple languagesProgrammable inputs outputs

GBP 264.70
1

Advanced Remote Status Indicator Panel with LCD and LED Indicators EX-3020

Advanced Remote Status Indicator Panel with LCD and LED Indicators EX-3020

Advanced Remote Status Indicator Panel with LCD and LED Indicators EX-3020The Remote Status Indicators are available in two formats a basic display only with optional key switches or a manual release version with optional key-switch for automaticmanual mode. The Ex-Extinguishing system detects a fire in the same manner as a fire alarm system but in addition to sounding alarms it also controls the release of an extinguishing agent. The extinguishing agent can take many forms from CO through to specialist gasses developed solely for extinguishing purposes.The agent is released into the atmosphere in the area where a fire has been detected reducing the density of oxygen in the atmosphere around the fire thus extinguishing the fire. The Ex-Extinguishing system is used primarily in areas of significant valuestrategic importance to businesses e.g. computer suites telecom switch-rooms thus providing a cost effective solution to protect your work place.Key FeaturesRS485 Network PortSmall and CompactOptional Manual Release or Display OnlySurface Mount or Semi Flush OptionUp to 7 Remote Status Indicators per one Ex-3001 Panel3 Year Warranty as standardKey Switch Option for mode select or enable controlsMultiple LanguagesSlide In Labels

GBP 205.06
1

Advanced Remote Status Indicator LCD LED Indicators with Mode Select Key Switch EX-3021

Advanced Remote Status Indicator LCD LED Indicators with Mode Select Key Switch EX-3021

Advanced Remote Status Indicator LCD LED Indicators with Mode Select Key Switch EX-3021The Ex Remote Status Indicators are available in two formats a basic display only with optional key switches or a manual release version with optional keyswitch for automaticmanual mode. The Ex-extinguishing system detects a fire in the same manner as a fire alarm system but in addition to sounding alarms it also controls the release of an extinguishing agent.The extinguishing agent can take many forms from CO through to specialist gasses developed solely for extinguishing purposes. The agent is released into the atmosphere in the area where a fire has been detected reducing the density of oxygen in the atmosphere around the fire thus extinguishing the fire. The Ex-extinguishing system is used primarily in areas of significant valuestrategic importance to businesses e.g. computer suites telecom switch-rooms thus providing a cost effective solution to protect your work place.Key FeaturesSmall and compactRS485 network portOptional manual release or display onlySurface mount or semi-flush optionUp to 7 remote status indicators per one ExGo 1 loop panel3 year warranty as standardKey switch option for mode select or enable controlsMultiple languagesProgrammable inputs outputs

GBP 229.76
1

Advanced Ex-3030 Remote Status Indicator Panel with LCD LED and Manual Release Button

Advanced Ex-3030 Remote Status Indicator Panel with LCD LED and Manual Release Button

Advanced Ex-3030 Remote Status Indicator Panel with LCD LED and Manual Release ButtonThe Remote Status Indicators are available in two formats a basic display only with optional key switches or a manual release version with optional key-switch for automaticmanual mode. The Ex-Extinguishing system detects a fire in the same manner as a fire alarm system but in addition to sounding alarms it also controls the release of an extinguishing agent. The extinguishing agent can take many forms from CO through to specialist gasses developed solely for extinguishing purposes.The agent is released into the atmosphere in the area where a fire has been detected reducing the density of oxygen in the atmosphere around the fire thus extinguishing the fire. The Ex-Extinguishing system is used primarily in areas of significant valuestrategic importance to businesses e.g. computer suites telecom switch-rooms thus providing a cost effective solution to protect your work place.FeaturesRS485 Network PortSmall and CompactOptional Manual Release or Display OnlySurface Mount or Semi Flush OptionUp to 7 Remote Status Indicators per one Ex-3001 Panel3 Year Warranty as standardKey Switch Option for mode select or enable controlsMultiple LanguagesSlide In Labels

GBP 242.87
1

Advanced Semi-Flushing Bezel for Remote Status Indicator EXM-002

Advanced Semi-Flushing Bezel for Remote Status Indicator EXM-002

Advanced Semi-Flushing Bezel for Remote Status IndicatorEXM-002The Ex Remote Status Indicators are available in two formats a basic display only with optional key switches or a manual release version with optional key switch for automaticmanual mode.The Ex-extinguishing system detects a fire in the same manner as a fire alarm system but in addition to sounding alarms it also controls the release of an extinguishing agent.The extinguishing agent can take many forms from CO through to specialist gases developed solely for extinguishing purposes.The agent is released into the atmosphere in the area where a fire has been detected reducing the density of oxygen in the atmosphere around the fire thus extinguishing the fire.The Ex-extinguishing system is used primarily in areas of significant valuestrategic importance to businesses e.g. computer suites and telecom switch-rooms thus providing a cost-effective solution to protect your work place.Key FeaturesSmall and compactRS485 network portOptional manual release or display onlySurface mount or semi-flush optionUp to 7 remote status indicators per one ExGo 1 loop panel3-year warranty as standardKey switch option for mode select or enable controlsMultiple languagesProgrammable inputs and outputs

GBP 66.50
1

Advanced MxPro 5 MXP-513-050RY 25 Zone LED Card FIRE Red FAULT Y for Extended Enclosure

Advanced MxPro 5 MXP-513-050RY 25 Zone LED Card FIRE Red FAULT Y for Extended Enclosure

Advanced MxPro 5 MXP-513-050RY 25 Zone LED Card FIRE Red FAULT Y for Extended EnclosureThe LED indicator cards are a range of panel mounted peripheral modules that can be added to theMxPro 5series of control panels. The display cards are available in numerous configurations and provide individual indication of the zones in Fire by default but are also fully programmable.The units fully support dynamic zoning on networked or larger standalone systems and can be used to provide individual zonal LED indication at one location.ApplicationsThe zoneLED indicator card can be fitted to allMxPro 5control panels to provide indication of the zones in fire in addition to the panel graphical display. The LED will illuminate when the corresponding zone enters a Fire condition.This next generation in LED technology also allows the LED to be fully programmed. Each LED can now operate in accordance with the cause-and-effect strategy in which the LED can illuminate upon Fault Isolation Output Group plus many more.LED cards can now be ordered with Red and Yellow LED arrangements or provided with bi-colour LEDs with slide-in labels to assist identifying the origin of the condition.Key FeaturesProgrammable LEDs3-year warranty as standardFactory fitted or retro-fitSupports dynamic zoningFully programmableCost effective against ancillary hardware

GBP 234.06
1

Advanced MxPro 5 MXP-513L-050RY 25 Zone LED Card FIRE RED FAULT Yellow for Large Enclosure

Advanced MxPro 5 MXP-513L-050RY 25 Zone LED Card FIRE RED FAULT Yellow for Large Enclosure

Advanced MxPro 5 MXP-513L-050RY 25 Zone LED Card FIRE RED FAULT Yellow for Large EnclosureThe LED indicator cards are a range of panel mounted peripheral modules that can be added to theMxPro 5series of control panels. The display cards are available in numerous configurations and provide individual indication of the zones in Fire by default but are also fully programmable.The units fully support dynamic zoning on networked or larger standalone systems and can be used to provide individual zonal LED indication at one location.ApplicationsThe zoneLED indicator card can be fitted to allMxPro 5control panels to provide indication of the zones in fire in addition to the panel graphical display. The LED will illuminate when the corresponding zone enters a Fire condition.This next generation in LED technology also allows the LED to be fully programmed. Each LED can now operate in accordance with the cause-and-effect strategy in which the LED can illuminate upon Fault Isolation Output Group plus many more.LED cards can now be ordered with Red and Yellow LED arrangements or provided with bi-colour LEDs with slide-in labels to assist identifying the origin of the condition.Key FeaturesProgrammable LEDs3-year warranty as standardFactory fitted or retro-fitSupports dynamic zoningFully programmableCost effective against ancillary hardware

GBP 234.06
1