12 results (0,13420 seconds)

Show all filters

Brand

Colour

Show all

Size

Merchant

Price (EUR)

Show all

Reset filter

Products
From
Shops

Ansell Alpha-Tec 58-008 Gauntlet Size 09 (L) - Pack of 10

Ansell Alpha-Tec 58-008 Gauntlet Size 09 (L) - Pack of 10

AlphaTec 58-008 delivers chemical protection with the advantage of extended length protection covering the full arm. Designed for applications with a high splash risk or full immersion. AlphaTec 58-008s full length is 100% nitrile, offering the same protection at the fingertip to the end of the cuff, Nitrile polymer for excellent mechanical protection as well as resistance to oils, fats, greases and hydrocarbons , Lozenge grip for enhance grip in dry and wet conditions, Optimized fit that integrates the nylon liner into the nitrile and neoprene shell for better dexterity & tactility versus double gloving, Excellent dry & wet grip enhance dexterity and reduce hand fatigue , Wide cuff to allow donning over protection clothing , 25.2 (640mm) length , Food safe, EN ISO 374-1:2016 Type A Protective gloves against dangerous chemicals and micro-organisms. Terminology and performance requirements for chemical risks, AJKLOT, EN ISO 374-5:2016 Protective gloves against dangerous chemicals and micro-organisms. Terminology and performance requirements for micro-organisms risks, EN 388:2016 Protective gloves against mechanical risks 4102X, Level 4- Abrasion, Level 1- Cut Resistance , Level 0- Tear Resistance, Level 2- Puncture, Level X- ISO 13997 Cut Resistance

GBP 259.99
1

Ansell ANSELL ALPHATEC 04-005 GAUNTLET SIZE 09 (L) PK 12

Ansell ANSELL ALPHATEC 04-005 GAUNTLET SIZE 09 (L) PK 12

Heavyweight PVC supported glove with excellent comfort,Special nitrile and PVC blend formulation to provide good durability, protection and flexibility, even in low temperatures,13-gauge seamless cotton lining for added comfort and protection,Foam palm providing good oil resistant as well as good grip performance in wet & oily environment, 380mm length ,Food safe,EN ISO 374-1:2016 Type A Protective gloves against dangerous chemicals and micro-organisms. Terminology and performance requirements for chemical risks, JKLPMT, EN ISO 374-5:2016 Protective gloves against dangerous chemicals and micro-organisms. Terminology and performance requirements for micro-organisms risks,EN 388:2016 Protective gloves against mechanical risks 4131A,Level 4- Abrasion,Level 1- Cut Resistance ,Level 3- Tear Resistance,Level 1- Puncture,Level A ISO 13997 Cut Resistance

GBP 0.00
1

Ansell ANSELL ALPHATEC 04-004 GAUNTLET SIZE 09 (L) PK 12

Ansell ANSELL ALPHATEC 04-004 GAUNTLET SIZE 09 (L) PK 12

Heavyweight PVC supported glove with excellent comfort,Special nitrile and PVC blend formulation to provide good durability, protection and flexibility, even in low temperatures,13-gauge seamless cotton lining for added comfort and protection,Foam palm providing good oil resistant as well as good grip performance in wet & oily environment, 300mm length ,Food safe,EN ISO 374-1:2016 Type A Protective gloves against dangerous chemicals and micro-organisms. Terminology and performance requirements for chemical risks, JKLPMT, EN ISO 374-5:2016 Protective gloves against dangerous chemicals and micro-organisms. Terminology and performance requirements for micro-organisms risks,EN 388:2016 Protective gloves against mechanical risks 4131A,Level 4- Abrasion,Level 1- Cut Resistance ,Level 3- Tear Resistance,Level 1- Puncture,Level A ISO 13997 Cut Resistance

GBP 89.99
1

Ansell LOW VOLTAGE LEATHER PREMIUM GOAT SKIN PROTECTOR SZ 9 L

Ansell LOW VOLTAGE LEATHER PREMIUM GOAT SKIN PROTECTOR SZ 9 L

To ensure worker safety and the integrity of the rubber insulated glove the leather protectors need to be worn,Offers high dexterity while providing cut, puncture, and abrasion protection to your rubber insulated glove,Helps to extend the life of rubber insulated glove while provide mechanical protection,Used in Combination with Class 00 & 0 gloves such as the RIG011Y and RIG014Y,10 length ,EN 388:2016 Protective gloves against mechanical risks 2111B

GBP 27.99
1

Ansell 1800 Comfort Bound - Model 195 Size L Protective Suits

Ansell 1800 Comfort Bound - Model 195 Size L Protective Suits

The AlphaTec Chemical Protection Coveralls offer Type 5/6 protection against chemicals and airborne particulates. Designed for use in warm working environments, the moisture-permeable fabric prevents the build-up of body heat and keeps the wearer comfortable at all times. Features and Benefits Breathable SMS material to help reduce the risk of heat stress Silicone-free and suitable for spray painting applications Low linting for reduced risk of contamination in critical areas Elasticated waist, ankles, hood, and wrists for a secure and comfortable fit Anti-static treatment to disperse static build-up Designed to fit the contours of the body for improved comfort and safety Typical Applications Aerospace Automotive Boat and shipbuilding Life sciences Metal fabrication Wind turbine manufacturing Composites General maintenance Paint spraying Surface preparation Notes Type 5 EN ISO 13982-1 Dry particle suit Type 6 EN13034 Low-level spray tight suit EN1149-5 Anti-static EN1073-2 Barrier to radioactive particulates - Class 1 Notes Previously known as MICROGARD

GBP 9.99
1

Ansell HyFlex 11-842 Gloves Size 09L

Ansell HyFlex 11-842 Gloves Size 09L

Sustainable design: HyFlex 11-842 sustainable Multi-Purpose glove liners are designed with 90% recycled nylon yarn, reducing our carbon footprint by 75g CO2eq/pair,, and plastic-free inner packaging that contains 53% fewer materials, Increased durability: FORTIX Technology provides up to 20% greater abrasion resistance, Enhanced comfort: ZONZ Comfort Fit Technology helps improve breathability and dexterity, Touchscreen compatibility: These industrial gloves work with multiple touchscreen devices no need to remove them when switching between tasks for enhanced workplace safety, Certified skin-friendliness: These HyFlex gloves are dermatologically tested and free of harmful substances, Minimum recycled content of more than 30% in the final product (based on size 9), vs. standard nylon multi-purpose gloves, 71% less greenhouse gas emissions Ansells LCA, calculated as weight reduction, peerreviewed, vs. previous technology version , Foam nitrile palm coated, Recycled nylon spandex liner, 15 gauge , Food safe, Silicone free material: for no transfer of silicone containments to metal parts prior to painting, EN 388:2016 Protective gloves against mechanical risks 4131A, EN 407 Protective gloves against thermal risks X1XXXX

GBP 54.99
1

Ansell Alphatec 37-310 Glove Size 09 (L) X Pair

Ansell Alphatec 37-310 Glove Size 09 (L) X Pair

* These food-processing gloves offer an engineered fit to allow an optimum balance of fit and flexibility both on its own or as an over glove* 8mil/0.2mm thickness allows dexterity and tactility without a loss of durability* Nitrile Rubber (NBR) offering protection against light acids, greases, oils and liquids* The latex-free formulation of these meat-processing gloves presents no risk of Type 1 allergies* Reverse lozenge grip design* Unflocked to prevent the risk of food contamination* Long cuff extends to the forearm* 12.2 (310mm) Length * Green, 37-300 and Yellow, 37-320 Variants available upon request* EN ISO 374-1:2016 Type A Protective gloves against dangerous chemicals and micro-organisms. Terminology and performance requirements for chemical risks, JKT* EN ISO 374-5:2016 Protective gloves against dangerous chemicals and micro-organisms. Terminology and performance requirements for micro-organisms risks* EN 421 Protective gloves against ionizing radiation and radioactive contamination* ISO 18889:2019 Protective gloves for pesticide operators and re-entry workers. Performance requirements* EN 388:2016 Protective gloves against mechanical risks 2001X* Abrasion- Level 2* Cut Resistance- X* Tear- 0* Puncture- Level 1

GBP 2.99
1

Ansell 2000 Comfort Bound - Model 129 Size L Protective Suits

Ansell 2000 Comfort Bound - Model 129 Size L Protective Suits

Designed for working in warmer climates or warm working environments, these protective coveralls are constructed from breathable fabric to reduce the risk of heat stress. Delivering protection against low hazard liquid spray and biological hazards, these coveralls can be worn in conjunction with other complimentary PPE such as eye and hand protection. Features and Benefits Optimised body fit design to improve comfort and protection Super low linting to reduce product contamination Silicone-free and suitable for painting applications Elasticated waist, wrists, hood, and ankles for maximum flexibility and movement Re-sealable storm flap to protect the closure from particulate and against catching Thumb loops maintain secure coverage around the wrist for increased protection Protective back panel allows airflow around the suit to increase wearer comfort Bound seams ensure spray-tight front protection and excellent overall particle protection Typical Applications Life Sciences Automotive Inspection Metal fabrication Food processing Chemical Agriculture Emergency medical services Machinery operation Oil and gas Utilities Standards CE Category III EN ISO 139821 Type 5 Dry Particle Suit EN 13034 Type 6 Low Level Spray Tight Suit EN 10732 Class 2 Barrier to Radioactive Particles EN 11495 Anti-static Notes Seam type: stitched and taped Non woven

GBP 7.29
1

Ansell ANSELL ALPHATEC 37-310 GLOVE SIZE 09 (L) PK 144

Ansell ANSELL ALPHATEC 37-310 GLOVE SIZE 09 (L) PK 144

These food-processing gloves offer an engineered fit to allow an optimum balance of fit and flexibility both on its own or as an over glove, 8mil/0.2mm thickness allows dexterity and tactility without a loss of durability, Nitrile Rubber (NBR) offering protection against light acids, greases, oils and liquids, The latex-free formulation of these meat-processing gloves presents no risk of Type 1 allergies, Reverse lozenge grip design, Unflocked to prevent the risk of food contamination, Long cuff extends to the forearm, 12.2 (310mm) Length , Green, 37-300 and Yellow, 37-320 Variants available upon request, EN ISO 374-1:2016 Type A Protective gloves against dangerous chemicals and micro-organisms. Terminology and performance requirements for chemical risks, JKT, EN ISO 374-5:2016 Protective gloves against dangerous chemicals and micro-organisms. Terminology and performance requirements for micro-organisms risks, EN 421 Protective gloves against ionizing radiation and radioactive contamination, ISO 18889:2019 Protective gloves for pesticide operators and re-entry workers. Performance requirements, EN 388:2016 Protective gloves against mechanical risks 2001X, Abrasion- Level 2, Cut Resistance- X, Tear- 0, Puncture- Level 1

GBP 149.99
1

Ansell Alpha-Tec 58-005 Gauntlet Large Size 09 - Pack of 6

Ansell Alpha-Tec 58-005 Gauntlet Large Size 09 - Pack of 6

AlphaTec 58-005 is an evolution in chemical glove protection whilst making advancements in ergonomics to ensure exceptional fit, feel and tactility. Providing incredible durability and versality alongside a supported nylon liner for comfort, the AlphaTec 58-005 is the perfect chemical glove for acids, hydrocarbons, fats, oils amongst many others. Unique Nitrile/Neoprene blend provides enhanced chemical permeation and degradation resistance, Ansell Grip Technology for the handling of wet or oily parts providing enhanced dexterity, grip and comfort, Optimized fit that integrates the nylon liner into the nitrile and neoprene shell for better dexterity & tactility versus double gloving, Cuff can be folded to act as a gutter to prevent chemicals running down the arm, 13.8 (350mm) length , EN 407 Protective gloves against thermal risks X1XXXX, EN ISO 374-1:2016 Type A Protective gloves against dangerous chemicals and micro-organisms. Terminology and performance requirements for chemical risks, AJKLMNOPT, EN ISO 374-5:2016 Protective gloves against dangerous chemicals and micro-organisms. Terminology and performance requirements for micro-organisms risks, EN 388:2016 Protective gloves against mechanical risks 4122A, Level 4- Abrasion, Level 1- Cut Resistance , Level 2- Tear Resistance, Level 2- Puncture, Level A- ISO 13997 Cut Resistance

GBP 79.99
1