75 results (0,13603 seconds)

Show all filters

Brand

Merchant

Price (EUR)

Show all

Reset filter

Products
From
Shops

Apollo RW1800-060APO Reach Survey Kit Lite

Apollo RW1800-060APO Reach Survey Kit Lite

Apollo RW1800-060APO Reach Survey Kit LiteThe RW1800-060APO is a portable battery-powered toolkit for surveying signal strength of the REACH Wireless system ahead of installation into a building.The REACH range is designed to solve challenging installation scenarios for structures with restricted or complex access and installation conditions such as listed buildings out-buildings temporary structures where wired installation or long site downtime is not possible.Key FeaturesIncludes 1x network host device 1x field-device 1x extendable detector mounting poleField-device includes an RGB LED for signal strength indicationBi-directional wireless communicationDual channel redundancy

GBP 311.16
1

Apollo RW1300-260APO REACH Sounder VAD Base - Black

Apollo RW1300-260APO REACH Sounder VAD Base - Black

Apollo RW1300-260APO REACH Sounder VAD Base - BlackThe RW1300-260APO is a wireless analogue addressable sounderVAD bases that can be used as a stand-alone notification device with ablanking cap or as a combined solution with a REACH Wireless detector.Device AddressingDevice addressing is handled by the REACH WirelessLoop Interface device RW1700-030APO. Devices are soft-addressed automaticallywhen pairing with the Loop Interface and can be changed manually.Hard-addressing using Apollo XPERT cards are not supported.Key FeaturesCompatible only with REACH Wireless16 tone pairsFour volume settingsBi-directional wireless communicationDual-channel redundancyFive-year battery life

GBP 287.00
1

Apollo XPander Remote Indicator Module - XPA-IN-14102-APO

Apollo XPander Remote Indicator Module - XPA-IN-14102-APO

Apollo XPander Remote Indicator Module - XPA-IN-14102-APODesigned and manufactured using the latest techniques and surface-mount technology to ensure component count is kept to a minimum whilst maximising reliability the XPander Remote Indicator Module is used to indicate the activation of an individual device or zone.Brand InformationThe device is powered by a low-voltage dual supply alkaline battery pack which has been tested to provide a five-year life at normal conditions 15C to 35C the condition of which is continually monitored. The system indicates the remaining battery capacity with a low battery condition being indicated as a fault allowing 30 days for the battery pack to be changed before unit failure occurs.An additional warning is also given seven days before unit failure occurs. Removal of the remote indicator from the fixing plate will indicate a fault condition. The device is fully compliant with EN 54-25 and incorporates a locking screw to prevent unauthorised removal.

GBP 209.51
1

Apollo XP95 Heat Detector High Temperature 55000-401APO

Apollo XP95 Heat Detector High Temperature 55000-401APO

Apollo XP95 Heat Detector High Temperature 55000-401APOThe XP95 Heat Detector monitors temperature by using a single thermistor which provides a count output proportional to the external air temperature. The XP95 range features two heat detectors standard and high temperature. The standard heat detector is classified as an A2S device and will report an alarm at 55C. The high temperature detector classified as a CS device will report an alarm at 90C.OperationThe XP95 heat detectors have a low air flow resistance case made of self-extinguishing white polycarbonate. The devices monitor heat by using a single thermistor network which provides a voltage output proportional to the external air temperature. The standard heat detectors 55000-400 and 55000-420 respond to increasing air temperature in such a way that they are classified as an A2S device. Both devices will give 55 counts at 55C. A high temperature CS heat detector 55000-401 which can be installed in a typical ambient temperature of 55C is available. This device will give 55 counts at 90C.ApplicationThe choice of detector from the XP95 range follows the well-established principles of system design. That is the optimum detector type will depend on the type of fire risk and fire load and the type of environment in which the detector is sited. For general use smoke detectors are recommended since these give the highest level of protection. Smoke detectors from the XP95 range may be optical or multisensor types. It is generally accepted that ionisation types have a high sensitivity to flaming fires whereas optical detectors have high sensitivity to smouldering fires.Key FeaturesIdeal in environments that are dirty or smoky under natural conditionsWell suited for warehouses loading bays and car-parksUnaffected by wind or atmospheric pressure

GBP 32.66
1

Apollo XP95 Heat Detector Standard Temperature 55000-400APO

Apollo XP95 Heat Detector Standard Temperature 55000-400APO

Apollo XP95 Heat Detector Standard Temperature 55000-400APOThe XP95 Heat Detector monitors temperature by using a single thermistor which provides a count output proportional to the external air temperature. The XP95 range features two heat detectors standard and high temperature. The standard heat detector is classified as an A2S device and will report an alarm at 55C. The high temperature detector classified as a CS device will report an alarm at 90C.Brand InformationThe XP95 range of analogue addressable fire detectors uses tried and trusted technology to give the best performance and has unique features that benefit the installer and the end user. It is suitable for medium-to-large applications with simple installation requirements. As it operates using digital communication XP95 has a high immunity from corruption and is therefore often preferred in a large system where life safety is critical. XP95 products are frequently used in commercial industrial financial government ITtelecoms and healthcare applications.OperationThe XP95 heat detectors have a low air flow resistance case made of self-extinguishing white polycarbonate. The devices monitor heat by using a single thermistor network which provides a voltage output proportional to the external air temperature.The standard heat detectors 55000-400 and 55000-420 respond to increasing air temperature in such a way that they are classified as an A2S device. Both devices will give 55 counts at 55C. A high temperature CS heat detector 55000-401 which can be installed in a typical ambient temperature of 55C is available. This device will give 55 counts at 90C.Key FeaturesIdeal in environments that are dirty or smoky under normal conditionsWell-suited to warehouses loading bays and car parksUnaffected by wind or atmospheric pressureOther part codes include AD-2002

GBP 32.66
1

Apollo 55000-590APO XP95 InputOutput Module - Three Channel - Isolating

Apollo 55000-590APO XP95 InputOutput Module - Three Channel - Isolating

Apollo 55000-590APO XP95 InputOutput Module - Three Channel - IsolatingThe Three Channel InputOutput module provides three single pole voltage-free clean contact changeover relay outputs with common normally open and normally closed terminals provided for field cabling and three monitored switch inputs.The inputs are monitored for short and open circuit conditions and are protected against accidental connection to the detection loop.The device is loop-powered and incorporates bidirectional isolation circuitry to provide against detection loop short circuits. On-board LED status indication is provided for service and commissioning purposes a feature that can be deactivated during normal operation to reduce the current draw on the system.A 10-way DIP switch is provided to set the device address and LED control.Key FeaturesUses a single addressBuilt-in Short Circuit Isolator3mm screw fixing supplied or DIN Rail mounting optionDiagnostic LED IndicationsMonitored inputs

GBP 109.62
1

Apollo Intelligent Open Area Red Sounder Sonos - 55000-001APO

Apollo Intelligent Open Area Red Sounder Sonos - 55000-001APO

Apollo Intelligent Open Area Red Sounder Sonos - 55000-001APOThe Intelligent Open-Area Sounder has beendesigned for use in open areas and can be connected to any Discovery or XP95 system.Key Features Self-test fault monitoringChoice of tones on standard device Apollo Slow Whoop and DINTwo volume settings 92dBA and 100dBASynchronisation of tonesIndividual and group addressingBuilt in isolatorRed or white optionsLoop-poweredIP65 rated

GBP 44.81
1

Apollo RW1500-110APO Reach Open-Area Sounder White Body

Apollo RW1500-110APO Reach Open-Area Sounder White Body

Apollo RW1500-110APO Reach Open-Area Sounder White BodyThe RW1500-110APO is a wireless addressable interface and conventional open-area wall sounder that can be used as a stand-alone notification device.The REACH Wireless Open-Area Wall Sounder VAD Base includes a 360 LED indicator which to indicate status conditions.REACH Wireless devices are supplied with two CR123 batteries battery A and B. The device switches periodically between the two batteries on a controlled sequence. For correct operation of the device both batteries are required with adequate capacity reserves.The REACH range is designed to solve challenging installation scenarios for structures with restricted or complex access and installation conditions such as listed buildings out-buildings temporary structures where wired installation or long site downtime is not possible.Key FeaturesCompatible only with REACH Wireless16 tone pairsFour Volume SettingsBi-directional wireless communicationDual channel redundancyFive year battery lifeFive year product warranty

GBP 196.39
1

Apollo RW1000-660APO REACH Optical Smoke Detector Black Body

Apollo RW1000-660APO REACH Optical Smoke Detector Black Body

Apollo RW1000-660APO REACH Optical Smoke Detector Black BodyThe RW1000-660APO is a wireless addressable optical smokedetector that utilises dual-optical smoke detection technology for improvedperformance maintaining the highest levels of false-alarm rejection.Device AddressingDevice addressing is handled by the REACH WirelessLoop Interface device RW1700-030APO.Devices are soft-addressed automatically when pairing withthe Loop Interface and can be changed manually. Hard-addressing using ApolloXPERT cards are not supported.CommunicationREACH Wireless Devices use radio-frequency wireless communicationto connect to the Loop-Interface.The Loop-Interface RW1700-030APO translates the wireless communicationinto wired Apollo protocol communication with each device addressableindividually by the fire panel. Tamper detectionREACH Wireless devices contain an anti-tamper mechanism. In theevent of removal from its base it sends a tamper detection message to theLoop-Interface.Key FeaturesTwin alarm bi-colour LEDs for 360 visibilityAdvanced dual-optical chamber designAdvanced drift compensationBi-directional wireless communicationDual-channel redundancyTen-year battery life

GBP 178.81
1

Apollo Intelligent Red Open-Area Sounder Beacon - 55000-005APO

Apollo Intelligent Red Open-Area Sounder Beacon - 55000-005APO

Apollo Intelligent Red Open-Area Sounder Beacon - 55000-005APOThe Intelligent Open-Area Sounder Visual Indicator is designed for use in open areas and can be connected to an Apollo Discovery or XP95 system.Key Features Self-test monitoringChoice of tones on standard device Apollo Slow Whoop and DINTwo volume settings 92dBA and 100dBAIndividual and group addressingSynchronisation of tones and flashesBuilt in isolatorLoop-poweredIP65 ratedRed and clear lens options

GBP 69.17
1

Apollo RW1500-210APO Reach Open-Area Sounder VAD Cat. W White Body White-Flash W-2.5-7

Apollo RW1500-210APO Reach Open-Area Sounder VAD Cat. W White Body White-Flash W-2.5-7

Apollo RW1500-210APO Reach Open-Area Sounder VAD Cat. W White Body White-Flash W-2.5-7The RW1500-210APO is a wireless analogue addressable interface and a conventional open-area sounder VAD that can be used as a stand-alone notification device.The REACH Wireless Open-Area Wall Sounder VAD Base includes a 360 LED indicator which to indicate status conditions.REACH Wireless devices are supplied with two CR123 batteries battery A and B. The device switches periodically between the two batteries on a controlled sequence. For correct operation of the device both batteries are required with adequate capacity reserves.The REACH range is designed to solve challenging installation scenarios for structures with restricted or complex access and installation conditions such as listed buildings out-buildings temporary structures where wired installation or long site downtime is not possible.Key FeaturesCompatible only with REACH Wireless16 tone pairsFour Volume SettingsBi-directional wireless communicationDual channel redundancyFive year battery lifeFive year product warranty

GBP 260.92
1

Apollo RW1500-220APO Reach Open-Area Sounder VAD Cat. W Red Body White Flash W-2.5-7

Apollo RW1500-220APO Reach Open-Area Sounder VAD Cat. W Red Body White Flash W-2.5-7

Apollo RW1500-220APO Reach Open-Area Sounder VAD Cat. W Red Body White Flash W-2.5-7The RW1500-220APO is a wireless analogue addressable interface and a conventional open-area sounder VAD that can be used as a stand-alone notification device.The REACH Wireless Open-Area Wall Sounder VAD Base includes a 360 LED indicator which to indicate status conditions.REACH Wireless devices are supplied with two CR123 batteries battery A and B. The device switches periodically between the two batteries on a controlled sequence. For correct operation of the device both batteries are required with adequate capacity reserves.The REACH range is designed to solve challenging installation scenarios for structures with restricted or complex access and installation conditions such as listed buildings out-buildings temporary structures where wired installation or long site downtime is not possible.Key FeaturesCompatible only with REACH Wireless16 tone pairsFour Volume SettingsBi-directional wireless communicationDual channel redundancyFive year battery lifeFive year product warranty

GBP 260.92
1

Apollo 29600-664 Conventional Open-Area Sounder VAD Cat. W - Outdoor - Red Body Red Flash

Apollo 29600-664 Conventional Open-Area Sounder VAD Cat. W - Outdoor - Red Body Red Flash

Apollo 29600-664 Conventional Open-Area Sounder VAD Cat. W - Outdoor - Red Body Red FlashThe Conventional Open-Area Wall Sounder VAD is used to provide audible and visual warning of a fire. Combining an EN 54-3 compliant sounder with an EN 54-23 compliant VAD enables this device to be used in areas that require the use of both an audible and a visual alarm.Key FeaturesFor use outdoorsRed body with red flashConventional

GBP 176.29
1

Apollo Intelligent Clear Open-Area Sounder Beacon - 55000-006APO

Apollo Intelligent Clear Open-Area Sounder Beacon - 55000-006APO

Apollo Intelligent Clear Open-Area Sounder Beacon - 55000-006APOThe Intelligent Open-Area Sounder Visual Indicator is designed for use in open areas and can be connected to an Apollo Discovery or XP95 system. A nominal sound output of 100dBA is achieved at a current consumption of 5mA in the case of the sounder and 8mA for the sounder beacon. Many control panels will be able to drive up to 20 sounders and up to 15 sounder beacons per loop on average.The maximum number of devices that may be connected to a particular loop should however be determined by a loop loading calculation using the Apollo Loop Calculator. Since the alarm devices are intended for use in open areas it is possible for more than one device to be audible at any given point in a building. For this reason the operation of all may be synchronised by the control panel.Key FeaturesSelf-test monitoringChoice of tones on standard device Apollo Slow Whoop and DINTwo volume settings 92dBA and 100dBAIndividual and group addressingSynchronisation of tones and flashesBuilt in isolatorLoop-poweredIP65 rated

GBP 69.17
1

Apollo Intelligent Open Area White Sounder Sonos - 55000-002APO

Apollo Intelligent Open Area White Sounder Sonos - 55000-002APO

Apollo Intelligent Open Area White Sounder Sonos - 55000-002APOThe Intelligent Open-Area Sounder has been designed for use in open areas and can be connected to any Discovery or XP95 system. A nominal sound output of 100dBA is achieved at a current consumption of 5mA in the case of the sounder and 8mA for the sounder beacon. Many control panels will be able to drive up to 20 sounders and up to 15 sounder beacons per loop on average.The maximum number of devices that may be connected to a particular loop should however be determined by a loop loading calculation using the Apollo Loop Calculator. Since the alarm devices are intended for use in open areas it is possible for more than one device to be audible at any given point in a building. For this reason the operation of all may be synchronised by the control panel.Key FeaturesSelf-test fault monitoringChoice of tones on standard device Apollo Slow Whoop and DINTwo volume settings 92dBA and 100dBASynchronisation of tones Individual and group addressingBuilt in isolator Red or white optionsLoop-poweredIP65 rated

GBP 44.81
1

Apollo 55000-982APO Addressable Door Retainer

Apollo 55000-982APO Addressable Door Retainer

Apollo 55000-982APO Addressable Door RetainerThe Apollo ADR is an XP95 device designed for installation directly onto an addressable loop and is suitable for use on all types of fire door including critical actuation doors. The addressable functionality allows panel cause effect programming in complex buildings that facilitates evacuation whilst closing fire doors in alarmed areas.Key FeaturesPatented Permanent Magnet TechnologyExtra low voltage usage200N Holding ForceSuitable for Critical Actuation Category A installations when connected to A compliant fire panel

GBP 197.92
1

Apollo Orbis CR Heat Detector - ORB-HT-11005-APO

Apollo Orbis CR Heat Detector - ORB-HT-11005-APO

Apollo Orbis CR Heat Detector - ORB-HT-11005-APOThe Orbis Heat Detector monitors the temperature by using a single thermistor which provides a voltage output proportional to the external air temperature.Key FeaturesCan be used for applications where smoke detectors are unsuitableIdeal in environments that are dirty or smoky under normal conditionsRed flashing LED at StartUp confirms that the device is operating. SensAlert yellow flashing LED indicates faulty operationFasTest takes just four seconds to test and confirm detectors are functioning correctly

GBP 15.80
1

Apollo Orbis A1S Heat Detector - ORB-HT-11166-APO

Apollo Orbis A1S Heat Detector - ORB-HT-11166-APO

Apollo Orbis A1S Heat Detector - ORB-HT-11166-APOThe Orbis Heat Detector monitors the temperature by using a single thermistor which provides a voltage output proportional to the external air temperature.Key FeaturesCan be used for applications where smoke detectors are unsuitableIdeal in environments that are dirty or smoky under normal conditionsRed flashing LED at StartUp confirms that the device is operating. SensAlert yellow flashing LED indicates faulty operationFasTest takes just four seconds to test and confirm detectors are functioning correctly

GBP 14.72
1

Apollo Orbis BR Heat Detector - ORB-HT-11003-APO

Apollo Orbis BR Heat Detector - ORB-HT-11003-APO

Apollo Orbis BR Heat Detector - ORB-HT-11003-APOThe Orbis Heat Detector monitors the temperature by using a single thermistor which provides a voltage output proportional to the external air temperature.Key FeaturesCan be used for applications where smoke detectors are unsuitableIdeal in environments that are dirty or smoky under normal conditionsRed flashing LED at StartUp confirms that the device is operating. SensAlert yellow flashing LED indicates faulty operationFasTest takes just four seconds to test and confirm detectors are functioning correctly

GBP 15.80
1

Apollo Orbis A1R Heat Detector - ORB-HT-11001-APO

Apollo Orbis A1R Heat Detector - ORB-HT-11001-APO

Apollo Orbis A1R Heat Detector - ORB-HT-11001-APOThe Orbis Heat Detector monitors the temperature by using a single thermistor which provides a voltage output proportional to the external air temperature.Key FeaturesCan be used for applications where smoke detectors are unsuitableIdeal in environments that are dirty or smoky under normal conditionsRed flashing LED at StartUp confirms that the device is operating. SensAlert yellow flashing LED indicates faulty operationFasTest takes just four seconds to test and confirm detectors are functioning correctly

GBP 14.72
1

Apollo Red Multi-Tone Open-Area Sounder Beacon with Isolator - 55000-293APO

Apollo Red Multi-Tone Open-Area Sounder Beacon with Isolator - 55000-293APO

Apollo Red Multi-Tone Open-Area Sounder Beacon with Isolator - 55000-293APOThe Multi-Tone Open-Area Sounder Visual Indicatoris designed for use in indoor open areas and can be connected to any Discovery or XP95 system. The sounder visual indicator complements Apollos intelligent and integrated base sounders as well as the Multi-Tone Open-Area Sounder.Key Features Choice of tones on standard device Apollo Slow Whoop and DINTwo volume settings 92dBA and 100dBASynchronisation of alert and evacuate tonesIndividual and group addressingBuilt in isolatorIP21C

GBP 101.80
1

Apollo Orbis A2S Heat Detector - ORB-HT-11002-APO

Apollo Orbis A2S Heat Detector - ORB-HT-11002-APO

Apollo Orbis A2S Heat Detector - ORB-HT-11002-APOThe Orbis Heat Detector monitors the temperature by using a single thermistor which provides a voltage output proportional to the external air temperature.Key FeaturesCan be used for applications where smoke detectors are unsuitableIdeal in environments that are dirty or smoky under normal conditionsRed flashing LED at StartUp confirms that the device is operating. SensAlert yellow flashing LED indicates faulty operationFasTest takes just four seconds to test and confirm detectors are functioning correctly

GBP 14.72
1