feed zone portables from GBP 19 | See the cheapest prices and offers on css.lazzaweb.dk

C-Tec CFP765 Relay Output Card 4 Output Per Zone Relays for CFP704-4

C-Tec CFP765 Relay Output Card 4 Output Per Zone Relays for CFP704-4 An optional system expansion device for use withCFP704-4 Standard 4 Zone Fire PanelsorCFP704-2 AlarmSense 4 Zone Fire Panels.Provides four output per zone relays which will changeover when the corresponding zone is in alarm.Key FeaturesPCB mounts inside the CFP fire panelOutputs are NOT designed to switch mains voltages

GBP 37.87

1

C-Tec CFP766 Relay Output Card 2 Output Per Zone Relays For CFP702-4

C-Tec CFP766 Relay Output Card 2 Output Per Zone Relays For CFP702-4 An optional system expansion device for use withCFP702-4 Standard 2 Zone Fire PanelsorCFP702-2 AlarmSense 2 Zone Fire Panels.Provides two output per zone relays which will changeover when the corresponding zone is in alarm.Key FeaturesPCB mounts inside the CFP fire panelOutputs are NOT designed to switch mains voltages

GBP 32.76

1

C-Tec CFP Relay Output Card 8 Outputs Per Zone Relays for CFP708-4 CFP764

C-Tec CFP Relay Output Card 8 Outputs Per Zone Relays for CFP708-4 CFP764An optional system expansion device for use withCFP708-4 Standard 8 Zone Fire PanelsorCFP708-2 AlarmSense 8 Zone Fire Panels.Provides eight output per zone relays which will changeover when the corresponding zone is in alarm.Key FeaturesPCB mounts inside the CFP fire panel.Outputs are NOT designed to switch mains voltages.

GBP 42.96

1

C-Tec FF374X FPX Expansion Loom and Terminals

C-Tec FF374X FPX Expansion Loom and TerminalsAn expansion Loom and Terminals for use with FP 2-14 zone panels.

GBP 39.24

1

C-Tec NC809DBBT Conventional Accessible Toilet Reset Point with Sounder

C-Tec NC809DBBT Conventional Accessible Toilet Reset Point with SounderThe NC809DBBT is a remote reset point cw sounder specifically designed for use in Accessible Toilet Alarm systems. The device allows calls generated by an NC807C ceiling pull unit to be cancelled at source i.e. inside the WC.On-board reassurance LED and sounder provide audible and visual indication of an acknowledged call to reassure users that help is on the way calls are acknowledgedaccepted at an NC943B Single Zone Call Controller or an NC91020 Range 10 to 20 Zone Call Controller.Key FeaturesMounts on a standard UK 25mm single gang flush or surface back box.Also available as part of the NC951 Accessible Toilet Alarm kit.

GBP 19.48

1

C-Tec XFP385 XFP Flush Mounting Bezel

C-Tec XFP385 XFP Flush Mounting BezelAllows XFP 1-2 Loop 32 Zone FirePanels to be semi-flush mounted.Key FeaturesAttractive slimline design.Finished in mild steel.Front face when in situmeasures 456 W x 293 H mm.Hole required to accommodate the bezel and the fire panel is412 W x 255 H x 50 D mm.

GBP 32.59

1

C-Tec NC885 Standard 51 Input Expander

C-Tec NC885 Standard 51 Input Expander -used to provide areazonal indicationInput expanders are used to give area indication and have five inputs and one output which can operate overdoor lights interface modules or zone indicators on a panel in another part of the building. The outputs of several input expanders can be connected together. Fix by self-adhesive pad.Key FeaturesSize53mm x 25mm x 20mm

GBP 27.98

1

C-Tec EP214 System Line Terminator

Ctec System Line Terminator EP214The EP214 is an optional system expansion device for use withthe EP203 three zone automatic extinguisher panel.Ideal for terminating the EP203s release output to a gas release solenoid or multiple metronsigniting actuators.Key FeaturesOne EP214 terminator is required per solenoid.Max. 2 x EP214 terminators per EP203 note one is supplied with the EP203.Measures just 55m W x 55mm H x 22mm D.

GBP 30.92

1

C-Tec NC888D Conventional Remote Sounder

C-Tec NC888D Conventional Remote SounderThe NC888D can be connected to any multi-zone 800 Series Call Controller MasterIndicator Panel or Switchable Sounder to increase call indication levels.Key FeaturesIndicates Standard calls via a constant tone and Emergency calls via a pulsing toneNo more than two remote sounders should be connected to thehosting deviceWhen connected to an NC887D Switchable Sounder switching the NC887D off will also disable anyremote sounders connected to it

GBP 24.77

1

C-Tec NC804DE Conventional Emergency Call Reset Point with Button Reset

C-Tec NC804DE Conventional Emergency Call Reset Point with Button ResetA button-operated callresetpoint capable of generating Emergency calls on an 800 Series Call System. Onboard reset button cancels Emergency calls made from the NC804DE and Standard calls made from other devices wired on the same zone such as ceiling pull units in Ensuite areas. Ideal for use as a reset point for ceiling pull units that will allow a more urgent Emergency call to be made if additional assistance is required.Key FeaturesRed reassurance LED confirms a call has been made.Mounts on a standard UK 25mm single gang flush or surface back box.

GBP 36.24

1

C-Tec NC802DB Conventional Call Point with Button Reset and Remote Socket

C-Tec NC802DB Conventional Call Point with Button Reset and Remote SocketAn attractively designed button-operated callreset point capable of generating Standard calls on an 800 Series Call System. Includes a 6.35mm jack plug socket for the connection of an optional tail call lead pressure mat or other ancillary calling device.Key FeaturesRed reassurance LED confirms a call has been made.Onboard reset button cancels calls made from the NC802DB and standard calls made from other devices wired on the same zone such as ceiling pull units in en-suite areasMounts on a standard UK 25mm single gang flush or surface back box

GBP 27.18

1

C-Tec NC802DEB-12 Conventional Emergency Call Point with Button Reset and Remote Socket

C-Tec NC802DEB-12 Conventional Emergency Call Point with Button Reset and Remote SocketAn attractively designed button-operated callreset point capable of generating Standard and Emergency calls on an 800 Series Call System. Includes a 6.35mm jack plug socket for the connection of an optional tail call lead pressure mat or other ancillary calling device.Key FeaturesRed reassurance LED confirms a call has been madeOnboard reset button cancels Standard and Emergency calls made from the NC802DEB-12 and Standard calls made from other devices wired on the same zone such as ceiling pull units in Ensuite areasMounts on a standard UK 25mm single gang flush or surface back box

GBP 43.27

1

C-Tec SPE0849000 NC802DB cw QT602E Label

C-Tec SPE0849000 NC802DB cw QT602E LabelThe SPE0849000 is a NC802DB which comes with a QT602E Label.An attractively designed button-operated callreset point capable of generating Standard calls on an 800 Series Call System.Key FeaturesIncludes a 6.35mm jack plug socket for the connection of an optional tail call lead pressure mat or other ancillary calling deviceRed reassurance LED confirms a call has been madeOnboard reset button cancels calls made from the NC802DB and standard calls made from other devices wired on the same zone such as ceiling pull units in Ensuite areasMounts on a standard UK 25mm single gang flush or surface back box

GBP 25.38

1

Awardvindende Google Marketing Powerhouse

Brand

Merchant

Price (EUR)