48 results (0,14082 seconds)

Show all filters

Brand

Merchant

Price (EUR)

Show all

Reset filter

Products
From
Shops

C-Tec QT302RXW Quantec Master IR Ceiling Receiver White

C-Tec QT302RXW Quantec Master IR Ceiling Receiver White

C-Tec QT302RXW Quantec Master IR Ceiling Receiver WhiteThe QT302RXW Quantec Master IR Ceiling Receiver is designed to accept infrared calls from compatible Quantec staff attack transmitters patient neckwrist pendants and staff attendance pendants.Typically used in bedrooms corridors common rooms and any other area requiring infrared coverage.Key FeaturesIncludes a red confidence lightTypical 10m line of sight receiving rangeUp to three QT302RXS slave receivers can be connected to a master ceiling receiver to increase IR coverageColour White

GBP 75.01
1

C-Tec QT302RXR Quantec Round Master Infrared Ceiling Receiver

C-Tec QT302RXR Quantec Round Master Infrared Ceiling Receiver

C-Tec QT302RXR Quantec Round Master Infrared Ceiling ReceiverAn unobtrusive white round version of our Quantec Master Ceiling Receiver. Designed to accept infrared calls from compatible Quantec staff attack transmitters patient neckwrist pendants and staff attendance pendants. Typically used in bedrooms corridors common rooms and any other area requiring infrared coverage.Key FeaturesInclude a red confidence light.Typical 10m line of sight receiving range.Up to three QT302RXRS slave receivers can be connected to a master ceiling receiver to increase IR coverage.

GBP 81.77
1

C-Tec QT302RXSW Quantec Slave Infrared Ceiling Receiver White

C-Tec QT302RXSW Quantec Slave Infrared Ceiling Receiver White

C-Tec QT302RXSW Quantec Slave Infrared Ceiling Receiver WhiteThe Quantec Slave Infrared Ceiling Receiver connects to amaster Quantec infrared receiving device to increase IR coverage. It acceptsinfrared calls from compatible Quantec staff attack transmitters patientneckwrist pendants and staff attendance pendants.Key FeaturesTypically used in bedrooms corridors common rooms and anyother area requiring extended infrared coverageTypical 10m line of sight receiving rangeUp to three QT302RXS slave receivers can be used per masterPlease note The image is for illustrative purposes only. This product will come in the colour white.

GBP 64.69
1

C-Tec QT602RS Quantec Call Point with Sounder IR Receiver and Button Reset

C-Tec QT602RS Quantec Call Point with Sounder IR Receiver and Button Reset

C-Tec QT602RS Quantec Call Point with Sounder IR Receiver and Button ResetA programmable Quantec addressable call point cw infrared receiver call follower sounder and remote jack socket. Includes a Call button Resetbuttonand redgreen confidence light. Onboard infrared receiver accepts calls from compatible Quantecinfrared transmitters. Can make up to 7 levels of call - Standard Ensuite Help Required Emergency Attack Presence Attendance dependent on configuration and ancillary devices used.Key FeaturesRemote socket allows the connection of optional tail call leads pressure mats etc.Can be programmed to operate in a multitude of ways using a QT423 configurator.Connections provided for additional slave devices such as ceiling pulls overdoor lights slave infrared receivers and more.Call follower sounder can be optionally used to inform staff that other calls are waiting when the system is in Night mode.QT602RSM magnetic reset version also available.

GBP 61.07
1

C-Tec QT602ERSM Quantec Euro Call Point with Sounder IR Receiver and Magnetic Reset

C-Tec QT602ERSM Quantec Euro Call Point with Sounder IR Receiver and Magnetic Reset

C-Tec QT602ERSM Quantec Euro Call Point with Sounder IR Receiver and Magnetic ResetA programmable Quantec addressable call point cw iconised label infrared receiver call follower sounder and remote jack socket. Includes a Call buttonResetbuttons and redgreen confidence light. Onboard infrared receiver accepts calls from compatible Quantecinfrared transmitters. Can make up to 7 levels of call - Standard Ensuite Help Required Emergency Attack Presence Attendance dependent on configuration and ancillary devices used.Key FeaturesRemote socket allows the connection of optional tail call leads pressure mats etc.Can be programmed to operate in a multitude of ways using a QT423 configurator.Connections provided for additional slave devices such as ceiling pulls overdoor lights slave infrared receivers and more.Call follower sounder can be optionally used to inform staff that other calls are waiting when the system is in Night modesee Technical Specifications for further details.Magnetic reset version.

GBP 66.88
1

C-Tec QT609RSM Quantec Call Point Magnetic Reset with Sounder and Infrared Receiver No Remote Sockets

C-Tec QT609RSM Quantec Call Point Magnetic Reset with Sounder and Infrared Receiver No Remote Sockets

C-Tec QT609RSM Quantec Call Point Magnetic Reset with Sounder and Infrared Receiver No Remote SocketsA programmable Quantec addressable call point cw infrared receiver and call follower sounder. Includes a Call button Resetbuttonand redgreen confidence light. Onboard infrared receiver accepts calls from compatible Quantecinfrared transmitters. Can make up to 7 levels of call - Standard Ensuite Help Required Emergency Attack Presence Attendance dependent on configuration and ancillary devices used.Key FeaturesCan be programmed to operate in a multitude of ways using a QT423 configurator.Connections provided for additional slave devices such as ceiling pulls overdoor lights slave infrared receivers and more.Call follower sounder can be optionally used to inform staff that other calls are waiting when the system is in Night modesee Technical Specifications for further details.Magnetic reset version.

GBP 65.51
1

C-Tec QT302RX Quantec Master Infrared Ceiling Receiver

C-Tec QT302RX Quantec Master Infrared Ceiling Receiver

C-Tec QT302RX Quantec Master Infrared Ceiling ReceiverDesigned to accept infrared calls from compatible Quantec staff attack transmitters patient neckwrist pendants and staff attendance pendants. Typically used in bedrooms corridors common rooms and any other area requiring infrared coverage.Key FeaturesInclude a red confidence light.Typical 10m line of sight receiving range.Up to three QT302RXS slave receivers can be connected to a master ceiling receiver to increase IR coverage.

GBP 78.76
1

C-Tec QT602ERS Quantec Euro Call Point with Sounder IR Receiver and Button Reset

C-Tec QT602ERS Quantec Euro Call Point with Sounder IR Receiver and Button Reset

C-Tec QT602ERS Quantec Euro Call Point with Sounder IR Receiver and Button ResetA programmable Quantec addressable call point cw iconised label infrared receiver call follower sounder and remote jack socket. Includes a Call buttonResetbuttons and redgreen confidence light. Onboard infrared receiver accepts calls from compatible Quantecinfrared transmitters. Can make up to 7 levels of call - Standard Ensuite Help Required Emergency Attack Presence Attendance dependent on configuration and ancillary devices used.Key FeaturesRemote socket allows the connection of optional tail call leads pressure mats etc.Can be programmed to operate in a multitude of ways using a QT423 configurator.Connections provided for additional slave devices such as ceiling pulls overdoor lights slave infrared receivers and more.Call follower sounder can be optionally used to inform staff that other calls are waiting when the system is in Night modesee Technical Specifications for further details.QT602ERSM magnetic reset version also available.

GBP 66.88
1

C-Tec QT609RS Quantec Call Point Button Reset with Sounder and Infrared Receiver No Remote Sockets

C-Tec QT609RS Quantec Call Point Button Reset with Sounder and Infrared Receiver No Remote Sockets

C-Tec QT609RS Quantec Call Point Button Reset with Sounder and Infrared Receiver No Remote SocketsA programmable Quantec addressable call point cw infrared receiver and call follower sounder. Includes a Call button Resetbuttonand redgreen confidence light. Onboard infrared receiver accepts calls from compatible Quantecinfrared transmitters. Can make up to 7 levels of call - Standard Ensuite Help Required Emergency Attack Presence Attendance dependent on configuration and ancillary devices used.Key FeaturesCan be programmed to operate in a multitude of ways using a QT423 configurator.Connections provided for additional slave devices such as ceiling pulls overdoor lights slave infrared receivers and more.Call follower sounder can be optionally used to inform staff that other calls are waiting when the system is in Night modesee Technical Specifications for further details.QT609RSM magnetic reset version also available.

GBP 62.71
1

C-Tec QT302RXRS Quantec Round Slave Infrared Ceiling Receiver

C-Tec QT302RXRS Quantec Round Slave Infrared Ceiling Receiver

C-Tec QT302RXRS Quantec Round Slave Infrared Ceiling ReceiverAn unobtrusive white roundslave infrared receiver. Connects to a master Quantec infrared receiving device to increase IR coverage. Designed to accept infrared calls from compatible Quantec staff attack transmitters patient neckwrist pendants and staff attendance pendants. Typically used in bedrooms corridors common rooms and any other area requiring infrared coverage.Key FeaturesTypical 10m line of sight receiving range.Up to three QT302RXRS slave receivers can be used permaster.

GBP 64.69
1

C-Tec QT422RX Quantec Mk2 Radio Receiver

C-Tec QT422RX Quantec Mk2 Radio Receiver

C-Tec QT422RX Quantec Mk2 Radio ReceiverDesigned for use with Quantecs QT412 QT432 range of infraredradio transmitters and pendants. Allows standard help required emergency andor attack calls to be generated from external areas such as car parks loading bays etc.Key FeaturesTypical RF coverage is 60m depending on physical conditions environmental factors.Optional external extension aerial QT422RXEX can increase coverage to up to 90m.Test Mode allows localised transmitterreceiver testing.Optional QT421 RF Integrity Transmitter can be used to send regular test transmissions to the Receiver to ensure it is operational a fault is flagged if a transmission is not received.Can be configured to receive calls from certain transmitters only via an RF grouping facility.Operates at radio frequency RF 868.3 MHz.

GBP 304.93
1

C-Tec NC302RXC Conventional Infrared Master Ceiling Receiver

C-Tec NC302RXC Conventional Infrared Master Ceiling Receiver

C-Tec NC302RXC Conventional Infrared Master Ceiling ReceiverA ceiling-mountable infrared receiver that will accept Standard Emergency calls from compatible 800 Series infrared transmitters. Can receive line-of-sight infrared signals from around 10m away dependent on physical conditions and environmental factors.Key FeaturesRed reassurance LED confirms a call has been made.Can be connected to up to three NC302RXCS slave infrared ceiling receivers to increase coverage in long corridors large rooms etc.Requires a separate remote reset point such as our NC802DB button reset NC809DM magnetic reset or NC899IRR keyswitch reset points for cancelling calls.Mounts on a standard UK 25mm single gang flush or surface back box.

GBP 50.45
1

C-Tec PDA200E AKT1 Hearing Loop Kit for TV Music Lounge 200m2

C-Tec PDA200E AKT1 Hearing Loop Kit for TV Music Lounge 200m2

C-Tec PDA200E AKT1 Hearing Loop Kit for TV Music Lounge 200m2Hearing loop systems allow hearing impaired people to hear more clearly. Most hearing aids have a T or MT switch which allows them to pick up the electromagnetic field generated by a hearing loop system. The hearing aid converts this signal into a sound suited to its users specific hearing requirements.Any person with a hearing aid positioned within or near the loop can hear the loop signal by switching their hearing aid to the correct position allowing them to participate more effectively in general conversation ordering goods or services listening to public performances etc.Includes a PDA200E hearingloop amplifier AMP handheld microphone APS SCART to double phono lead APXM outreach plate APL outreach plate AL5 lead and 2 x 6m Belden cable. Ideal for creatinga high-quality induction loop system for aTV or Music lounge.Key FeaturesWall-mountable PDA200E amplifier capable of driving a perimeter loop of up to 200m2.Internal drive level and metal compensation controls.Two balanced unbalanced line level inputs.One microphone input with 12V phantom power for electret microphones.Full compatibility with the Outreach plate audio input extension system.Fully compliant withBS EN 60118-4 when correctly installed.Loop cable not included-use our LOOP2W1mm2 cable or download our AFILS loop calculator from our Software Apps page formore precise recommendations.Technical SpecificationInduction Loop Type Wall mounting requires fixed mains wiringCoverage 200m2 approx.Dimensions W 273 x H 200 x D 77mm amplifier only 2.82kgInputs 1 x Microphone 2 x LineOutreachIndicators Input level Power Compression Peak Current 321Controls Metal Compensation Input level loop drivePlease Note the AK range of hearing loop kits dont come with loop cable please use 1mm2 single core cable such as C-Tecs LOOP2W cable.

GBP 843.79
1

C-Tec NC432W Conventional Infrared Wrist Pendant Transmitter

C-Tec NC432W Conventional Infrared Wrist Pendant Transmitter

C-Tec NC432W Conventional Infrared Wrist Pendant TransmitterThe NC432W allows patients in bedrooms and communal areas to remotely trigger standard calls via an 800 series infrared call point ceiling receiver or radio receiver. Suppliedon an adjustable wrist strap alleviating the need for longandpotentially hazardous tail call leads.Key Features10m line-of-sight IR transmitting rangePowered by a user-replaceable 12V alkaline battery

GBP 82.98
1

C-Tec QT302RXS Quantec Slave Infrared Ceiling Receiver

C-Tec QT302RXS Quantec Slave Infrared Ceiling Receiver

C-Tec QT302RXS Quantec Slave Infrared Ceiling ReceiverConnects to a master Quantec infrared receiving device to increase IR coverage. Accepts infrared calls from compatible Quantec staff attack transmitters patient neckwrist pendants and staff attendance pendants. Typically used in bedrooms corridors common rooms and any other area requiring extended infrared coverage.Key FeaturesTypical 10m line of sight receiving range.Up to three QT302RXS slave receivers can be used permaster.

GBP 64.69
1

C-Tec QT432W Quantec Infrared Radio Patient Wrist Pendant with Wrist Strap

C-Tec QT432W Quantec Infrared Radio Patient Wrist Pendant with Wrist Strap

C-Tec QT432W Quantec Infrared Radio Patient Wrist Pendant with Wrist StrapAllows patients in bedrooms and communal areas to remotely trigger standard calls via a Quantec infrared call point ceiling receiver or radio receiver. Suppliedon an adjustable wrist strap alleviating the need for longandpotentially hazardous tail call leads.Key Features10m line-of-sight IR transmitting range.Radio coverage dependent on the Quantec receiving device used.Powered by a user-replaceable 12V alkaline battery.Can be programmed with a unique User ID so staff can see who is calling using a QT423 configurator.Supplied with a sheet of coloured markable labels.

GBP 64.68
1

C-Tec QT432 Quantec Infrared Radio Patient Neck Pendant with Lanyard

C-Tec QT432 Quantec Infrared Radio Patient Neck Pendant with Lanyard

C-Tec QT432 Quantec Infrared Radio Patient Neck Pendant with LanyardAllows patients in bedrooms and communal areas to remotely trigger standard calls via a Quantec infrared call point ceiling receiver or radio receiver Alleviates the need for long potentially hazardous tail call leads.Key FeaturesSupplied with an anti-ligature neck lanyard.10m line-of-sight IR transmitting range.Radio coverage dependent on the Quantec receiving device used.Powered by a user-replaceable 12V alkaline battery.Can be programmed with a unique User ID so staff can see who is calling using a QT423 configurator.Supplied with a sheet of coloured markable labels.

GBP 64.67
1

C-Tec QT432S Spare Wrist Straps Pack of 10

C-Tec QT432S Spare Wrist Straps Pack of 10

C-Tec QT432S Spare Wrist Straps Pack of 10The QT432S allows patients in bedrooms and communal areas to remotely trigger standard calls via a Quantec infrared call point ceiling receiver or radio receiver. It is suppliedon an adjustable wrist strap alleviating the need for longandpotentially hazardous tail call leads.Key Features10m line-of-sight IR transmitting range.Radio coverage dependent on the Quantec receiving device used.Powered by a user-replaceable 12V alkaline battery.Can be programmed with a unique User ID so staff can see who is calling using a QT423 configurator.Supplied with a sheet of coloured markable labels.Please note This is for the spare wrist straps ONLY. To purchase the full product please Click Here.

GBP 56.32
1

C-Tec QT412RXCA Infrared Radio Transmitter Push for Call Pull for Attack

C-Tec QT412RXCA Infrared Radio Transmitter Push for Call Pull for Attack

C-Tec QT412RXCA Infrared Radio Transmitter Push for Call Pull for AttackAllows staff to remotely trigger Attack and Standard calls via a Quantec infrared call point ceiling receiver or radio receiver. Can also be used on 800 Series call systems to trigger Standard and Emergency calls via an800 Series infrared receiving device.Key Features10m line-of-sight IR transmitting range.Radio coverage dependent on the Quantec receiving device used.Includes a Karabiner clip for attaching to staff uniforms.Calls are triggered by pulling the transmitters retaining clip or activating one ofits two buttons.Can be recharged using a QT4241 single-way or QT42410 ten-way charging unit.Can be programmed to generate different call levels using a QT423 configurator.Transmitters used on Quantec systems can also be programmed to includeaunique User IDname.

GBP 115.03
1

C-Tec QT412RXA Infrared Radio Transmitter Push for Attack Pull for Attack

C-Tec QT412RXA Infrared Radio Transmitter Push for Attack Pull for Attack

C-Tec QT412RXA Infrared Radio Transmitter Push for Attack Pull for AttackAllows staff working in high-risk environments to remotely trigger an Attack call via a Quantec infrared call point ceiling receiver or radio receiver. Can also be used on 800 Series call systems to trigger Standard and Emergency calls via an800 Series infrared receiving device.Key Features10m line-of-sight IR transmitting range.Radio coverage dependent on the Quantec receiving device used.Includes a Karabiner clip for attaching to staff uniforms.Calls are triggered by pulling the transmitters retaining clip or activating one ofits two buttons.Can be recharged using a QT4241 single-way or QT42410 ten-way charging unit.Can be programmed to generate different call levels using a QT423 configurator.Transmitters used on Quantec systems can also be programmed to includeaunique User IDname.

GBP 115.03
1

C-Tec NC802DERM Conventional Infrared Call Point with Magnetic Reset and Remote Socket

C-Tec NC802DERM Conventional Infrared Call Point with Magnetic Reset and Remote Socket

C-Tec NC802DERM Conventional Infrared Call Point with Magnetic Reset and Remote SocketA button operated call point which comes with an infrared receiver capable of generating Standard and Emergency calls on an 800 Series Call System. Includes a magnetic reset target that requires an NC803M magnetic reset key to operate.Onboard infrared receiver will accept Standard Emergency calls from compatible 800 Series infrared transmitters. Calls can also be made by activating the call points CALL button to make a Standard call and the call points CALL RESET target together for an emergency call.Key FeaturesIncludes a6.35mm jack plug socket for the connection of an optional tail call lead or other ancillary calling deviceRed reassurance LED confirms a call has been madeOnboardmagentic reset target cancels Standard and Emergency calls made from the NC802DEWM and Standard calls made from other devices on the same zoneCan be connected to up to 3 NC302RXCS slave infrared ceiling receivers to increase coverageMounts on a standard UK 25mm single gang flush or surface back box

GBP 63.59
1