61 results (0,35420 seconds)

Show all filters

Brand

Merchant

Price (EUR)

Show all

Reset filter

Products
From
Shops

C-Tec ECU-224 SigTEL 224 Line Desk Controller

C-Tec ECU-224 SigTEL 224 Line Desk Controller

C-Tec ECU-224 SigTEL 224 Line Desk ControllerOptional 1-224 line SigTEL Desk Controller with handset display. Requires an ECU723 fitted at an ECU-4 8 or 16 Controller. ECU-224s are NOT compatible with ECU-8NT Controllers.A new 224line Desk Controllerfor use with our SigTEL disabled refuge fire telephone and stadium marshallingsystem.Allows operators to communicate with up to 224disabled refuge or fire telephone outstations.Designed to simplify call-handling on larger EVC installations.Must be connected to an ECU-4 8 or 16 master controller viaan ECU-723 interfacenetwork card.Although designed to be free-standing an optional sloping wall mounting shelf is available order code ECUWMB.See schematicfull instructions for further details.

GBP 968.15
1

C-Tec ZREP1F ZFP Compact Controller Flush Mounted

C-Tec ZREP1F ZFP Compact Controller Flush Mounted

C-TecZREP1FZFP Compact Controller Flush MountedThe ZFP controller is an optional ZFP network device that can be used as a traditional but compact repeater panel with added functionality. Includes a Z41 Touchscreen Control Module and ZHN Hi-Net multi-path fault-tolerant network PCB. Housed in an stylish flush mounting plastic enclosure measuring just 214mm x178mm.Can be used to an enhance a buildings reception area and access points locate your main ZFP panels out of sight and let our ZFP Compact Controllers add a touch of class to your surroundings. Full Access Level 2 functionality silence disable reset etc. Requires a separate EN54-4 boxed PSU such as C-TECs BF360-24 1A 24V boxed PSU. Up to 64 Compact Controllers can be connected to a ZFP network each controller classed as 1 network node.

GBP 648.28
1

C-Tec ZREP1S ZFP Compact Controller Surface Mounted ZREP1S

C-Tec ZREP1S ZFP Compact Controller Surface Mounted ZREP1S

C-TecZREP1SZFP Compact Controller Surface Mounted ZREP1SThe ZFP controller is an optional ZFP network device that can be used as a traditional but compact repeater panel with added functionality. Includes a Z41 Touchscreen Control Module and ZHN Hi-Net multi-path fault-tolerant network PCB. Housed in a stylish surface mounting plastic enclosure measuring just 214mm x178mm x 70mm.Can be used to enhance a buildings reception area and access points locate your main ZFP panels out of sight and let our ZFP Compact Controllers add a touch of class to your surroundings. Full Access Level 2 functionality silence disable reset etc. Requires a separate EN54-4 boxed PSU such as C-TECs BF360-24 1A 24V boxed PSU. Up to 64 Compact Controllers can be connected to a ZFP network each controller classed as 1 network node.

GBP 648.28
1

C-Tec QT631M Quantec Dimentia Care Room Status Controller with Magnetic Reset

C-Tec QT631M Quantec Dimentia Care Room Status Controller with Magnetic Reset

C-Tec QT631M Quantec Dimentia Care Room Status Controller with Magnetic ResetThe Quantec QT631M dementia care room status controller features a magnetic reset and allows staff to isolate certain functions e.g. PIRs during daytime hours to put the room into Presence and to reset calls using a magnetic swipe key. Can also be interfaced to a doorbell unit when the patient presses the doorbell a call is activated.

GBP 66.20
1

C-Tec QT631K Quantec Dimentia Care Room Status Controller with Key Switch Reset

C-Tec QT631K Quantec Dimentia Care Room Status Controller with Key Switch Reset

C-Tec QT631K Quantec Dimentia Care Room Status Controller with Key Switch ResetThe Quantec QT631K dementia care room status controller features a key reset and allows staff to isolate certain functions e.g. PIRs during daytime hours to put the room into Presence and to reset calls using a magnetic swipe key. Can also be interfaced to a doorbell unit when the patient presses the doorbell a call is activated.

GBP 73.72
1

C-Tec NC944SS Four Zone Call Controller in Stainless Steel

C-Tec NC944SS Four Zone Call Controller in Stainless Steel

C-Tec NC944SS Four Zone Call Controller in Stainless SteelThe NC944SS is an attractively-designed four zone call controller which comes with mute and reset buttons.Key FeaturesFully compatible with C-TECs entire range of 800 Series Call System componentsCapable of indicating standard constant tone and emergency intermittent tone callsRequires a separate NC930 12V 250mA PSUIncludes four zonal alarm LEDs RESET and MUTE buttonsTwo open collector outputs Emergency and Aux OutUp to two NC944s can be connected to one NC930 PSU to create a mini-call system of up to 8 zonesMounts on a standard 25mm UK double gang back boxPlease note The image is for illustrative purposes only

GBP 235.82
1

C-Tec NC944 Four Zone Call Controller with Mute Reset Button

C-Tec NC944 Four Zone Call Controller with Mute Reset Button

C-Tec NC944 Four Zone Call Controller with Mute Reset ButtonThe NC944 Four Zone Call Controller is compatible with all 800 Series call points ceiling pulls infrared ceiling receivers monitoring points overdoor lights and remote sounders.Depending on how the Controller is configured and the devices connected to it Standard and Emergency calls can be indicated via its buzzer and zonal LEDs. Two buttons are also provided to allow the user to Reset or Mute standard calls as detailed below.Standard Calls when triggered by a calling device the Controllers internal buzzer sounds continuously and the relevant zone indicators illuminate steady.Pressing the Controllers Reset Button if enabled cancels all standard calls.Pressing the Controllers Mute Button if enabled silences the Controllers internal buzzer. However if a new call standard or emergency is triggered anywhere on the system the buzzer will resound.Emergency Calls when triggered by a calling device the Controllers internal buzzer pulses and the relevant zone indicators flash. This level of call takes priority over standard calls and cannot be muted accepted or reset at the Controller. An emergency call can only be reset at the device from which it was triggered or via a reset point wired on the same zone.Key FeaturesAn attractively-designed four zone call controller cw mute and reset buttonsFully compatible with C-TECs entire range of 800 Series Call System componentsCapable of indicating standard constant tone and emergency intermittent tone callsRequires a separate NC930 12V 250mA PSUIncludes four zonal alarm LEDs RESET and MUTE buttonsTwo open collector outputs Emergency and Aux OutUp to two NC944s can be connected to one NC930 PSU to create a mini-call system of up to 8 zonesMounts on a standard 25mm UK double gang back box

GBP 75.00
1

C-Tec BF365SC Sounder Isolator Controller

C-Tec BF365SC Sounder Isolator Controller

BF365SC Sounder Isolator ControllerBF365SC Conventional Sounder Controller and its associated BF365IM Isolator Modules are designed to interface to a fire alarm panels conventional sounder circuit. The Modules each of which would typically have a conventional sounder connected to it are wired in a loop arrangement beginning and ending at the controller. The Controller transforms the conventional sounder circuits monitoring and triggering voltages into its own unique control voltages which it uses to trigger the Isolator Modules and monitor the sounder loop wiring.Each Module has smart sensing which means if a wiring fault should occur the Modules nearest to the faulty section of cabling will if needed isolate this section. As the Modules are driven from each direction any loss of cable integrity will have no effect on the functionality of the actual sounders. Having a fault tolerant arrangement such as this means that low cost cabling can be used for the sounder circuit subject to the fire officers approval leading to significant savings in installation.Key FeaturesDesigned to meet requirement 17.9.2c of Dutch standard NEN2575BSI certified to EN54 parts 17 18Easily interfaced to a conventional fire alarm sounder circuitAllows low-cost non-fire resistant sounder circuit cabling to be used when used in conjunction with our BF365IM Isolator Modules subject to fire officer approval.Wiring must be made in a loop arrangement beginning and ending at the controllerIf a wiring fault should occur the Modules nearest to the faulty section of cabling will if needed isolate this section. As the Modules are driven from each direction any loss of cable integrity will have no effect on the functionality of the actual soundersFits on standard UK 25mm flush or surface mount back boxesNot suitable for use in the UK

GBP 77.21
1

C-Tec NC941SS Conventional Stainless Steel Single Zone Call Controller with PSU amp Reset Button

C-Tec NC941SS Conventional Stainless Steel Single Zone Call Controller with PSU amp Reset Button

C-Tec NC941SS Conventional Stainless Steel Single Zone Call Controller with PSU Reset ButtonThe NC941SS is a stainless-steel single zone call controller with a built-in mains to regulated DC power supply providing 250mA at 13.5V. An on-board buzzer reset button and LED indicator are provided making it ideal for all types of single zone call communication applications including disabled persons toilet alarms. The NC941SS is compatible with all 800 Series call points ceiling pulls and remote sounders.Key FeaturesA high-quality brushedstainless-steel single zone call controller cw a 12V 250mA PSUFully compatible with C-TECs entire range of 800 Series Call System componentsCapable of indicating standard constant tone and emergency intermittent tone callsPower On and Alarm CALLING LEDsOpen collector output goes to 12V when the controllers onboard buzzer soundsMounts on a standard UK 40mm double gang flush or surface back box

GBP 171.83
1

C-Tec CA739 CAST 4 Way Sounder Controller Extendable To 8 Way ZFP ONLY

C-Tec CA739 CAST 4 Way Sounder Controller Extendable To 8 Way ZFP ONLY

C-Tec CA739 CAST 4 Way Sounder Controller Extendable To 8Way ZFP ONLYA 4-8 way sounder controller specifically designed for useon a C-TEC CAST ZFP addressable fire alarm system.Compatible with C-TECs CAST ZFP Addressable Fire Panels.This device is NOT compatible with CAST XFP panels.Key FeaturesSupplied as a 4 circuit unit extendable to 8 circuits usinga CA739PCBProvides 4 or 8 monitored 12.5mA sounder circuitsIncludes space and connections for an optional fullymonitored auxiliary 24V 1.5A CA739PSU to power additional devicesIncludes an onboard short circuit loop isolatorUses one loop address per 4 sounder circuits12.5mA per sounder circuit capacity when loop powered 300mAper sounder circuit capacity when aux CA739PSU PSU is usedMaintains the independent open short circuitmonitoring of all sounder circuits

GBP 171.24
1

C-Tec QT601-2 Quantec Controller

C-Tec QT601-2 Quantec Controller

C-Tec QT601-2 Quantec ControllerQuantec is a powerful yet easy to use addressable call system that helps ensure vital communication throughout a building. In environments where efficiency is paramount Quantec delivers helping save staff time minimising disturbance and improving the quality of patient customer or employee care. Whatever the application - be it a call system for a nursing home hospital hotel or leisure centre or a staff protection system for a high dependency unit prison factory shop school or council office - Quantec is the obvious choice.With its flexible call routing multiple call levels a unique data protocol that works down just two wires and a laptop programmable system controller Quantec can be tailored to suit the exact operational needs of any building. For example calls can be routed to different parts of a site at different times of the day and unanswered calls can be set to transfer to other areas after a pre-determined time. As well as a huge range of cost-effective call points ceiling pulls displays monitoring points sounders neck pendants and infrared transmitters the system includes a host of industry-leading features.The controller supplies power to and controls a Quantec Addressable Call System. Monitors all network devices and manages the routing and distribution of all calls. Provides connections for network wiring standby batteries a laptop for system programmingoptionalpagingDECT equipment anoptionalprinter orPC to run Quantecs QT707S Surveyor data management software.Key FeaturesIncludes a library of 40 pre-set 45 custom place names.System setup requires a laptop PC running Quantecs QT707 programming tools.Can be semi-flush mounted using an QT385 bezel or fully-flushed using a BF3593S stainless steel enclosure.System wiring requires one or more QT603 network splitters.Wiring should be made in a spine and limb arrangement using 1.5 to 2.5mm2 TE spines and 4 to 8 core stranded security cable limbs.

GBP 426.65
1

C-Tec NC943B Conventional Single Zone Call Controller

C-Tec NC943B Conventional Single Zone Call Controller

C-Tec NC943B Conventional Single Zone Call ControllerThe NC943B is a single zone call controller cw a 12V 140mA PSU and standby battery. The device is fully compatible with C-TECs entire range of 800 Series Call System components.Key FeaturesCapable of indicating standard constant tone and emergency intermittent tone calls.Includes a volume adjustable sounder and a link-selectable Call AcceptReset button.Power on and Alarm CALLING LEDs.Volt-free relay output for the optional connection of externally powered beacons etc relay activates on active call signal.Standby battery provides up to 24 hours standby and 15 minutes alarm running time.Mounts on a standard UK 25mm double gang flush or surface back box.Also available as part of the NC951 Accessible Toilet Alarm Kit.

GBP 106.38
1

C-Tec 16 Line SigTEL Master Controller cw handset. Max 2 x 7Ah batteries ECU-16

C-Tec 16 Line SigTEL Master Controller cw handset. Max 2 x 7Ah batteries ECU-16

C-Tec 16 Line SigTEL Master Controller cw handset. Max 2 x 7Ah batteries ECU-16Designed foruse with our popular SigTEL system the ECU-16 features a new-look high-performance handset to allow operators tocommunicate with up to 16 disabled refuge or firetelephone systems.The controllers powerful networking capabilities also allow up to 14ECU-16 mastercontrollers to be interlinked to create systems of up to224 lines. A separate ECU-224desk control unit can also be connectedtoallow communication with up to 224outstations from a single point.Compatible with C-TECs entire range of Type A Fire Telephone andType B Disabled Refugeoutstations and remote fire telephonehandsets the controller can be easilyinterfaced to NC951 accessibletoilet alarms PDA hearing loop systems strobesCCTV activation relaysand more.Key FeaturesA new 16-line Master Controller for use with our SigTEL disabled refuge fire telephone and stadium marshallingsystem.Allows operators to communicate with up to four disabled refuge or fire telephone outstations.Includes an attractive semi-recessed handset.Improved SigTEL networking capability allow systems of up to 224 lines to be created with optionaladditional desk unit control.Backlit LCD and unique auto-learn facility allows fast system set up.Can be semi-flush mounted using an AFP385 bezel.Operation can be maintained for 24 hours standby and 3 hours in use using 2 x 12V 7 Ahr batteries.Easily interfaced to NC951 accessible toilet alarms PDA range hearingloop systems strobes CCTV activation relays etc.

GBP 1906.25
1

C-Tec NC910S Conventional 10 Zone Surface Master Call Controller

C-Tec NC910S Conventional 10 Zone Surface Master Call Controller

C-Tec NC910S Conventional 10 Zone Surface Master Call ControllerThe NC910S Call Controller is compatible with all 800 Series call points ceiling pulls infrared ceiling receivers monitoring points overdoor lights and remote sounders.Depending on how the Controller is configured and the devices connected to it Standard and Emergency calls can be indicated via its buzzer and zonal LEDs. Two buttons A and B are also provided to allow the user to Reset Mute or Accept standard calls as detailed below.Standard Calls when triggered by a calling device the Controllers internal buzzer sounds continuously and the relevant zone indicators illuminate steady.Pressing the Controllers Reset Button A if enabled cancels all standard calls.Pressing the Controllers Mute Button B if enabled silences the Controllers internal buzzer. However if a new call standard or emergency is triggered anywhere on the system the buzzer will resound.Alternatively instead of muting calls Button B can be configured as a CALL ACCEPT button.Pressing Call Accept sends a slow pulsing acknowledgement signal to overdoor lights and reset points cw sounders provided they are wired as shown on the example wiring diagram below. Should a new call standard or emergency be triggered anywhere on the system any zones in the acknowledgement state will revert to a standard call.Emergency Calls when triggered by a calling device the Controllers internal buzzer pulses and the relevant zone indicators flash. This level of call takes priority over standard calls and cannot be muted accepted or reset at the Controller. An emergency call can only be reset at the device from which it was triggered or via a reset point wired on the same zone.Key FeaturesCompatible with C-TECs entire range of 800 Series field devicesHoused in an attractive surface mounting plastic enclosure measuring just 214mm x 178mmTwo call levels - standard constant tone and emergency intermittent toneOptional mute and call acceptreset buttonsCall Accept functionality allows staff to send an intermittent call acknowledgment signal to calling zones to confirm help is on the way dependent on wiring and field devices usedIncludes a 12V 300mA PSU and 2 volt-free relay contacts which activate on a standard or emergency callInnovative slide-in labelling systemZones can be wired in 4 or 6 core 702 stranded security cableAdditional master controllers and expansion units available for use as repeaters on larger sitesOptional boxed PSUs cw with space for a 12V VRLA battery available for sites where a standby battery facility is required

GBP 234.98
1

C-Tec NC910F Conventional 10 Zone Flush Master Call Controller

C-Tec NC910F Conventional 10 Zone Flush Master Call Controller

C-Tec NC910F Conventional 10 Zone Flush Master Call ControllerThe NC910FCall Controller is compatible with all 800 Series call points ceiling pulls infrared ceiling receivers monitoring points overdoor lights and remote sounders.Depending on how the Controller is configured and the devices connected to it Standard and Emergency calls can be indicated via its buzzer and zonal LEDs. Two buttons A and B are also provided to allow the user to Reset Mute or Accept standard calls as detailed below.Standard Calls when triggered by a calling device the Controllers internal buzzer sounds continuously and the relevant zone indicators illuminate steady.Pressing the Controllers Reset Button A if enabled cancels all standard calls.Pressing the Controllers Mute Button B if enabled silences the Controllers internal buzzer. However if a new call standard or emergency is triggered anywhere on the system the buzzer will resound.Alternatively instead of muting calls Button B can be configured as a CALL ACCEPT button.Pressing Call Accept sends a slow pulsing acknowledgement signal to overdoor lights and reset points cw sounders provided they are wired as shown on the example wiring diagram below. Should a new call standard or emergency be triggered anywhere on the system any zones in the acknowledgement state will revert to a standard call.Emergency Calls when triggered by a calling device the Controllers internal buzzer pulses and the relevant zone indicators flash. This level of call takes priority over standard calls and cannot be muted accepted or reset at the Controller. An emergency call can only be reset at the device from which it was triggered or via a reset point wired on the same zone.Key FeaturesCompatible with C-TECs entire range of 800 Series field devicesHoused in an attractive flush mounting plastic enclosure measuring just 214mm x 178mmTwo call levels - standard constant tone and emergency intermittent toneOptional mute and call acceptreset buttonsCall Accept functionality allows staff to send an intermittent call acknowledgment signal to calling zones to confirm help is on the way dependent on wiring and field devices usedIncludes a 12V 300mA PSU and 2 volt-free relay contacts which activate on a standard or emergency callInnovative slide-in labelling systemZones can be wired in 4 or 6 core 702 stranded security cableAdditional master controllers and expansion units available for use as repeaters on larger sitesOptional boxed PSUs cw with space for a 12V VRLA battery available for sites where a standby battery facility is required

GBP 228.82
1

C-Tec NC920F Conventional 20 Zone Flush Master Call Controller

C-Tec NC920F Conventional 20 Zone Flush Master Call Controller

C-Tec NC920F Conventional 20 Zone Flush Master Call ControllerThe NC920FCall Controller is compatible with all 800 Series call points ceiling pulls infrared ceiling receivers monitoring points overdoor lights and remote sounders.Depending on how the Controller is configured and the devices connected to it Standard and Emergency calls can be indicated via its buzzer and zonal LEDs. Two buttons A and B are also provided to allow the user to Reset Mute or Accept standard calls as detailed below.Standard Calls when triggered by a calling device the Controllers internal buzzer sounds continuously and the relevant zone indicators illuminate steady.Pressing the Controllers Reset Button A if enabled cancels all standard calls.Pressing the Controllers Mute Button B if enabled silences the Controllers internal buzzer. However if a new call standard or emergency is triggered anywhere on the system the buzzer will resound.Alternatively instead of muting calls Button B can be configured as a CALL ACCEPT button.Pressing Call Accept sends a slow pulsing acknowledgement signal to overdoor lights and reset points cw sounders provided they are wired as shown on the example wiring diagram below. Should a new call standard or emergency be triggered anywhere on the system any zones in the acknowledgement state will revert to a standard call.Emergency Calls when triggered by a calling device the Controllers internal buzzer pulses and the relevant zone indicators flash. This level of call takes priority over standard calls and cannot be muted accepted or reset at the Controller. An emergency call can only be reset at the device from which it was triggered or via a reset point wired on the same zone.Key FeaturesCompatible with C-TECs entire range of 800 Series field devicesHoused in an attractive flush mounting plastic enclosure measuring just 214mm x 178mmTwo call levels - standard constant tone and emergency intermittent toneOptional mute and call acceptreset buttonsCall Accept functionality allows staff to send an intermittent call acknowledgment signal to calling zones to confirm help is on the way dependent on wiring and field devices usedIncludes a 12V 300mA PSU and 2 volt-free relay contacts which activate on a standard or emergency callInnovative slide-in labelling systemZones can be wired in 4 or 6 core 702 stranded security cableAdditional master controllers and expansion units available for use as repeaters on larger sitesOptional boxed PSUs cw with space for a 12V VRLA battery available for sites where a standby battery facility is required

GBP 309.20
1

C-Tec NC920S Conventional 20 Zone Surface Master Call Controller

C-Tec NC920S Conventional 20 Zone Surface Master Call Controller

C-Tec NC920S Conventional 20 Zone Surface Master Call ControllerThe NC920S Call Controller is compatible with all 800 Series call points ceiling pulls infrared ceiling receivers monitoring points overdoor lights and remote sounders.Depending on how the Controller is configured and the devices connected to it Standard and Emergency calls can be indicated via its buzzer and zonal LEDs. Two buttons A and B are also provided to allow the user to Reset Mute or Accept standard calls as detailed below.Standard Calls when triggered by a calling device the Controllers internal buzzer sounds continuously and the relevant zone indicators illuminate steady.Pressing the Controllers Reset Button A if enabled cancels all standard calls.Pressing the Controllers Mute Button B if enabled silences the Controllers internal buzzer. However if a new call standard or emergency is triggered anywhere on the system the buzzer will resound.Alternatively instead of muting calls Button B can be configured as a CALL ACCEPT button.Pressing Call Accept sends a slow pulsing acknowledgement signal to overdoor lights and reset points cw sounders provided they are wired as shown on the example wiring diagram below. Should a new call standard or emergency be triggered anywhere on the system any zones in the acknowledgement state will revert to a standard call.Emergency Calls when triggered by a calling device the Controllers internal buzzer pulses and the relevant zone indicators flash. This level of call takes priority over standard calls and cannot be muted accepted or reset at the Controller. An emergency call can only be reset at the device from which it was triggered or via a reset point wired on the same zone.Key FeaturesCompatible with C-TECs entire range of 800 Series field devicesHoused in an attractive surface mounting plastic enclosure measuring just 214mm x 178mmTwo call levels - standard constant tone and emergency intermittent toneOptional mute and call acceptreset buttonsCall Accept functionality allows staff to send an intermittent call acknowledgment signal to calling zones to confirm help is on the way dependent on wiring and field devices usedIncludes a 12V 300mA PSU and 2 volt-free relay contacts which activate on a standard or emergency callInnovative slide-in labelling systemZones can be wired in 4 or 6 core 702 stranded security cableAdditional master controllers and expansion units available for use as repeaters on larger sitesOptional boxed PSUs cw with space for a 12V VRLA battery available for sites where a standby battery facility is required

GBP 315.38
1

C-Tec QT630 Quantec Dimentia Care Master Controller

C-Tec QT630 Quantec Dimentia Care Master Controller

C-Tec QT630 Quantec Dimentia Care Master ControllerAllows care providers to enhance the level of care they provide for patients suffering from dementia Alzheimers incontinence and other degenerative illnesses. Engineer programmable to suit the exact needsof an individual patientbedroom. Includes all of the inputs outputs timers and power needed for the connection of PIRs enuresis sensors bed exit mats LED lights door contacts IRreceivers overdoor lights and more.Key FeaturesCan be configured to automatically switch lights on and off when movement is detected.Provides clear and concise indication of room status data at all relevant Quantec displays.All roompatient call activity is logged at the main Quantec Controller andQuantec Surveyor.Comes with 10 pre-set patient monitoring configurations including high intensity medium-intensity and ensuite ushering.Easily adapted to the changing needs and behaviour patterns ofpatients giving them the freedom and dignity they need to live their lives as normally as possible.

GBP 342.34
1