hakomi mindfulness-centered somatic psychotherapy: a comprehensive guide to theory and practice from GBP 21 | See the cheapest prices and offers on css.lazzaweb.dk

Elmdene GEN3-08-A Switch Mode Power Supply Unit 1A

Elmdene GEN3-08-A Switch Mode Power Supply Unit 1AThe GEN series of switch mode power supplies has been specifically designed to provide a comprehensive and flexible range for engineers designing intruder alarm systems to Grade 2 and Grade 3 under EN50131-62008 and PD66622010.Key Features13.8V dc outputCost effective switch mode technologyEnergy efficientMore efficient in operationSaves power so reducing power billsLonger life in the fieldLess prone to failureFull current to load plus additional current to charge standby batteryComprehensive battery managementDeep discharge protectionBattery fault detection Grade 3High efficiency 3 stage chargingInternal LED PSU status Mains transient protection Electronic overload protection High security front tamper Grade 2High security front and rear tamper Grade 3Fault outputsEPS fault mains failAPS fault battery faultPSU fault general faultScreen printing available3 year warranty additional current for battery charging.Grade 3 Intruder systems.Mains Battery and PSU volt free fault outputs.Diagnostic LEDs.Lid rear tamper.Low quiescent battery standby current.Fit up to 7Ah battery. A Box 200h x 230w x 80d - Hinge lidPlease note The image is for illustrative purposes only. Please contact us for further information.

GBP 73.75

1

Elmdene GEN2-08-A 12VDC Switch Mode Power Supply Unit 1A

Elmdene GEN2-08-A 12VDC Switch Mode Power Supply Unit 1AThe GEN series of switch mode power supplies has been specifically designed to provide a comprehensive and flexible range for engineers designing intruder alarm systems to Grade 2 and Grade 3 under EN50131-62008 and PD66622010.Key Features 13.8V dc output1.0A to loadCost effective switch mode technologyEnergy efficientMore efficient in operationSaves power so reducing power billsLonger life in the fieldLess prone to failureFull current to load plus additional current to charge standby batteryComprehensive battery managementDeep discharge protectionBattery fault detection Grade 3High efficiency 3 stage chargingInternal LED PSU status Mains transient protection Electronic overload protection High security front tamper Grade 2High security front and rear tamper Grade 3Fault outputsEPS fault mains failAPS fault battery faultPSU fault general faultScreen printing available3 year warrantyAdditional current for battery charging.Grade 2 Intruder systemsMains Battery and PSU volt free fault outputs.Diagnostic LEDsLid tamper.Low quiescent battery standby current.A Box 200h x 230w x 80d - Hinge lidFit up to 7Ah battery.Please note The image is for illustrative purposes only. Please contact us for further information.

GBP 59.32

1

Elmdene GEN3-34-R 13.8v 3A SMPSU Dual Battery

Elmdene GEN3-34-R 13.8v 3A SMPSU Dual BatteryThe GEN series of switch mode power supplies has been specifically designed to provide a comprehensive and flexible range for engineers designing intruder alarm systems to Grade 2 and Grade 3 under EN50131-62017 and PD66622017Key Features13.8V dc outputCost effective switch mode technologyEnergy efficientFull current to load plus additional current to charge standby batteryInternal LED PSU statusMains transient protection

GBP 199.39

1

Elmdene G13803N-A 12V Switch Mode Power Supply Unit 3A A-Box

Elmdene G13803N-A 12V Switch Mode Power Supply Unit 3A A-BoxThe 12V dc G Range N Series power supplies has been designed for CCTV access control and general purpose applications that require the use of a standby battery. The products use energy efficient switch mode technology and have a universal mains supply input 90264V ac. Elmdenes FOM4 or FOM8 units can be fitted to give 4 or 8 independent fused outputs if required. The modular range consists of 1A 2A 3A 4A and 5A power variants with full rated current to load and also feature a fully regulated output with low ripple and noise. Unboxed module only versions are also available if required.Advantages of Switch Mode TechnologyElmdene products using switch mode technology are typically 80-87 efficient. This can save your customers money by reducing their energy bills and carbon footprint. Switch mode technology provides for lower power consumption provides cool running and energy efficient products that can result in improved long term reliability.Key Features13.8V dc outputCost effective switch mode technologyHigh energy efficient - reducing energy billsModular construction means easy maintenance and upgradingFull rated current to load 0.5A battery charging90 to 264V ac rangeElectronic overload protectionMains transient protectionLED indicationMains statusFaultScreen printing available3 year warranty12V d.c. Switch Mode PSU 13.8V 3Amp to load 0.5A battery charging.Efficient Switch Mode operation.Multi LED status indication.Fit up to 7Ah battery.A Box 200h x 230w x 80d - Hinge lidPlease note The image is for illustrative purposes only. Please contact us for further information.

GBP 60.37

1

Elmdene A-BOX-T Small Empty Metal Box - Box Size A - No LED Holes On Lid amp Tamper

Elmdene A-BOX-T Small Empty Metal Box - Box Size A - No LED Holes On Lid TamperA small empty metal box which offers a reliable convenient mounting solution. Built with metal product material to offer longevity and great resistance to damage and deterioration.Key FeaturesBox size ANo LED holes on lid and tamper

GBP 21.10

1

Elmdene STX2402-MOD 24V d.c. PSU 27.6V - Selectable 2 Amp To Load 0.3A Battery Charging or 1.8 Amp To Load 0.7A Battery Charging

Elmdene STX2402-MOD 24V d.c. PSU 27.6V - Selectable 2 Amp To Load 0.3A Battery Charging or 1.8 Amp To Load 0.7A Battery ChargingThe STX2402-MOD is a PSU for Fire Systems.The new STX range of switch mode power supplies has been specifically designed for EN54 compliant fire systems.The units include intelligent battery charging using Elmdenes efficient EcoCharge technology possess mains battery monitoring with independent volt free outputs and also feature battery deep discharge protection in the event of a prolonged mains failure.The inclusion of LED indicators provides quick diagnostics of the status of the power supply while a variety of enclosures offer the installer a choice of standby battery backup options.Key Features0.7A Battery Charging1.8 Amp To Load0.3A Battery ChargingSelectable 2 Amp To LoadHigh efficiency Switch Mode operationIntelligent Battery chargingMains Battery monitoring with independent volt free fault outputsDeep discharge protectionUser and Engineer diagnostic LED status indication27.6V dc outputCost effective switch mode technologyEnergy efficientMore efficient in operationSaves power reducing power billsLonger life in the fieldLess prone to failureDeep Discharge ProtectionRemote fault signallingFull rated current to load plus additional current for battery chargingLED indicationVolt-free fault output - EPSVolt-free fault output - PSU faultMains transient protection3 Year warrantyPlease note The image is for illustrative purposes only. Pleasecontact usfor further information.

GBP 111.65

1

Elmdene ACCESS-PSU-N 12V d.c. Switch Mode PSU 13.8V 2Amp To Load 0.5A Battery Charging

Elmdene ACCESS-PSU-N 12V d.c. Switch Mode PSU 13.8V 2Amp To Load 0.5A Battery ChargingThe ACCESS-PSU-N is part of a range of power supplies which have been specifically designed to house common access control door controllers. With different power options and enclosure sizes this range offers the installer a PSU for a variety of applications.This range offers fault signalling and can charge a 12V standby battery to provide backup power on a mains failure. Multi-fused outputs are provided to allow the installer to protect individual circuits as required. All models possess a mains fail relay output while the ACCESS-PSUx models also offer additional Battery Monitoring and Deep Discharge Protection.Key Features13.8V dc outputCompact single and multi-controller enclosuresPCB mounts supplied for common controllersMains fail fault output excluding ACCESS-PSU-NTamper protectionSwitchable 12V 24V dc versions availableUniversal 90 to 264V ac mains input rangeBespoke models and branding available3 year warrantyPlease note The image is for illustrative purposes only. Please contact us for further details.

GBP 63.04

1

Elmdene G13802N-A 12V Switch Mode Power Supply Unit 2A

Elmdene G13802N-A 12V Switch Mode Power Supply Unit 2AThe 12V dc G Range N Series power supplies has been designed for CCTV access control and general purpose applications that require the use of a standby battery. The products use energy efficient switch mode technology and have a universal mains supply input 90264V ac. Elmdenes FOM4 or FOM8 units can be fitted to give 4 or 8 independent fused outputs if required. The modular range consists of 1A 2A 3A 4A and 5A power variants with full rated current to load and also feature a fully regulated output with low ripple and noise. Unboxed module only versions are also available if required.Advantages of Switch Mode Technology Elmdene products using switch mode technology are typically 80-87 efficient. This can save your customers money by reducing their energy bills and carbon footprint. Switch mode technology provides for lower power consumption provides cool running and energy efficient products that can result in improved long term reliability.Key Features 13.8V dc outputCost effective switch mode technologyHigh energy efficient - reducing energy billsModular construction means easy maintenance and upgradingFull rated current to load 0.5A battery charging90 to 264V ac rangeElectronic overload protectionMains transient protectionLED indicationMains statusFaultScreen printing available3 year warranty12V d.c. Switch Mode PSU 13.8V 2Amp to load 0.5A battery charging.Efficient Switch Mode operation.Multi LED status indication.Fit up to 7Ah battery.A Box 200h x 230w x 80d - Hinge lidPlease note The image is for illustrative purposes only. Please contact us for further information.

GBP 49.03

1

Elmdene G13801N-A 12V Switch Mode Power Supply Unit 1A

Elmdene G13801N-A 12V Switch Mode Power Supply Unit 1AThe 12V dc G Range N Series power supplies has been designed for CCTV access control and general purpose applications that require the use of a standby battery. The products use energy efficient switch mode technology and have a universal mains supply input 90264V ac. Elmdenes FOM4 or FOM8 units can be fitted to give 4 or 8 independent fused outputs if required. The modular range consists of 1A 2A 3A 4A and 5A power variants with full rated current to load and also feature a fully regulated output with low ripple and noise. Unboxed module only versions are also available if required.Advantages of Switch Mode TechnologyElmdene products using switch mode technology are typically 80-87 efficient. This can save your customers money by reducing their energy bills and carbon footprint. Switch mode technology provides for lower power consumption provides cool running and energy efficient products that can result in improved long term reliability.Key Features 13.8V dc outputCost effective switch mode technologyHigh energy efficient - reducing energy billsModular construction means easy maintenance and upgradingFull rated current to load 0.5A battery charging90 to 264V ac rangeElectronic overload protectionMains transient protectionLED indicationMains statusFaultScreen printing available3 year warranty12V d.c. Switch Mode PSU 13.8V 1Amp to load 0.5A battery charging.Efficient Switch Mode operation.Multi LED status indication.Fit up to 7Ah battery.A Box 200h x 230w x 80d - Hinge lidPlease note The image is for illustrative purposes only. Please contact us for further information.

GBP 29.26

1

Elmdene STV2401-C 24V d.c. PSU 27.6V 1.2Amp To Load 0.3A Battery Charging

Elmdene STV2401-C 24V d.c. PSU 27.6V 1.2Amp To Load 0.3A Battery ChargingThe new STV range of switch mode power supplies has been specifically designed for EN54 compliant fire systems and is NFS Approved.Available in either 1A 2A or 5A versions they are certified to EN54-4 EN12101-10 and NF S 61-940 by AFNOR and VdS EN54-4 only.The units include intelligent battery charging using Elmdenes efficient EcoCharge technology possess mains battery monitoring with 2x independent volt-free outputs and also feature battery deep discharge protection in the event of a prolonged mains failure.The inclusion of LED indicators provides quick status diagnostics of the power supply while a variety of enclosures offer the installer a choice of standby battery backup options.Key FeaturesEN54 Certified PSU for Fire SystemsHigh efficiency Switch Mode operationIntelligent Battery chargingMains Battery monitoring with independent volt free fault outputsDeep discharge protectionUser and Engineer diagnostic LED status indicationFit up to 2x1.2Ah batteriesC Box

GBP 137.36

1

Elmdene G2405BMU 24V Switch Mode PSU 27.6V 5Amp To Load 0.5A Battery Charging

Elmdene G2405BMU 24V Switch Mode PSU 27.6V 5Amp To Load 0.5A Battery ChargingThe new 24V G Range BM Series power supplies has been designed for access control CCTV fire systems where compliance with EN54-4 is not required and general-purpose applications.The products use energy efficient switch mode technology and have a universal mains supply input 90264V ac.Elmdenes FOM4 or FOM8 units can be fitted to give 4 or 8 independent fused outputs if required.The modular range consists of 1A 2A 3A 5A and 10A power variants with full rated current to load and also feature a fully regulated output with low ripple and noise. Unboxed module only versions are also available if required with DIN rail mount options for 1A and 2A models.Elmdene products using switch mode technology are typically 80-87 efficient. This can save your customers money by reducing their energy bills and carbon footprint.Switch mode technology provides for lower power consumption provides cool running and energy efficient products that can result in improved long-term reliability.Key Features0.5A Battery Charging5Amp To Load24V Switch Mode PSU 27.6VEfficient Switch Mode operationMains and Battery monitoring with independent volt free fault outputsDeep discharge protectionMulti LED status indicationUn-Boxed27.6V dc outputCost effective switch mode technologyHigh energy efficient - reducing energy billsMains and battery monitoringVolt-free fault outputsModular construction means easy maintenance and upgradingFull rated current to load 0.8A battery charging90 to 264V ac rangeDeep discharge protectionElectronic overload protectionMains transient protection3 year warrantyPlease note The image is for illustrative purposes only.

GBP 140.21

1

Elmdene G13802BM-A 12V Switch Mode Power Supply Unit 2A

Elmdene G13802BM-A 12V Switch Mode Power Supply Unit 2AThe G Range BM Series switch mode power supplies are ideal for applications requiring mains and battery monitoring.The units have a regulated highly stable output supplying full rated current to load and a universal mains voltage input range 90 to 264V ac.These units may be used for intruder systems where compliance with EN50131-6 is not required. They are also available in DIN rail mounted unboxed versions if required.FOM 4 or 8 can be fitted to give independent fused outputs.Advantages of Switch Mode Technology Elmdene products using switch mode technology are typically 80-87 efficient.This can save your customers money by reducing their power bills and carbon footprint. Switch mode technology also makes for more reliable products in the field as they are less likely to overheat.Key Features 13.8V dc output90 to 264V ac input rangeCost effective switch mode technologyEnergy efficientMore efficient in operationSaves power so reducing power billsLonger life in the fieldLess prone to failureFull current to load plus additional current to charge standby batteryDeep discharge protectionMains and battery monitoringVolt-free fault outputsEPS fault mains failGEN fault PSU or battery faultInternal LED PSU statusMains statusOutput fuse failOutput short circuit or low voltageBattery low or missingMains transient protectionElectronic overload protectionFront and rear tamperScreen printing available3 year warranty12V 13.8V dc 2A SMPSU with battery MonitoringMetal Box 230Wx200Hx80D mmPlease note The image is for illustrative purposes only. Pleasecontact usfor further information.

GBP 73.57

1

Elmdene G2402BMU 24V Switch Mode PSU 27.6V 2Amp To Load 0.5A Battery Charging

Elmdene G2402BMU 24V Switch Mode PSU 27.6V 2Amp To Load 0.5A Battery ChargingThe new 24V G Range BM Series power supplies has been designed for access control CCTV fire systems where compliance with EN54-4 is not required and general-purpose applications.The products use energy efficient switch mode technology and have a universal mains supply input 90264V ac.Elmdenes FOM4 or FOM8 units can be fitted to give 4 or 8 independent fused outputs if required.The modular range consists of 1A 2A 3A 5A and 10A power variants with full rated current to load and also feature a fully regulated output with low ripple and noise. Unboxed module only versions are also available if required with DIN rail mount options for 1A and 2A models.Elmdene products using switch mode technology are typically 80-87 efficient. This can save your customers money by reducing their energy bills and carbon footprint.Switch mode technology provides for lower power consumption provides cool running and energy efficient products that can result in improved long-term reliability.Key Features2Amp To Load 0.5A Battery Charging24V Switch Mode PSU 27.6VEfficient Switch Mode operationMains and Battery monitoring with independent volt free fault outputsDeep discharge protectionMulti LED status indicationUn-Boxed27.6V dc outputCost effective switch mode technologyHigh energy efficient - reducing energy billsMains and battery monitoringVolt-free fault outputsModular construction means easy maintenance and upgradingFull rated current to load 0.8A battery charging90 to 264V ac rangeDeep discharge protectionElectronic overload protectionMains transient protection3 year warrantyPlease note The image is for illustrative purposes only. TheG2402BMU comes unboxed.

GBP 98.62

1

Elmdene G2403BMU 24V Switch Mode PSU 27.6V 3Amp To Load 0.5A Battery Charging

Elmdene G2403BMU 24V Switch Mode PSU 27.6V 3Amp To Load 0.5A Battery ChargingThe new 24V G Range BM Series power supplies has been designed for access control CCTV fire systems where compliance with EN54-4 is not required and general-purpose applications.The products use energy efficient switch mode technology and have a universal mains supply input 90264V ac.Elmdenes FOM4 or FOM8 units can be fitted to give 4 or 8 independent fused outputs if required.The modular range consists of 1A 2A 3A 5A and 10A power variants with full rated current to load and also feature a fully regulated output with low ripple and noise. Unboxed module only versions are also available if required with DIN rail mount options for 1A and 2A models.Elmdene products using switch mode technology are typically 80-87 efficient. This can save your customers money by reducing their energy bills and carbon footprint.Switch mode technology provides for lower power consumption provides cool running and energy efficient products that can result in improved long-term reliability.Key Features0.5A Battery Charging3Amp To Load24V Switch Mode PSU 27.6VEfficient Switch Mode operationMains and Battery monitoring with independent volt free fault outputsDeep discharge protectionMulti LED status indicationUn-Boxed27.6V dc outputCost effective switch mode technologyHigh energy efficient - reducing energy billsMains and battery monitoringVolt-free fault outputsModular construction means easy maintenance and upgradingFull rated current to load 0.8A battery charging90 to 264V ac rangeDeep discharge protectionElectronic overload protectionMains transient protection3 year warrantyPlease note The image is for illustrative purposes only. TheG2403BMU comes un-boxed.

GBP 118.99

1

Elmdene STV2405-E 24V d.c. PSU 27.6V 5 Amp To Load 0.8A Battery Charging

Elmdene STV2405-E 24V d.c. PSU 27.6V 5 Amp To Load 0.8A Battery ChargingThe new STV range of switch mode power supplies has been specifically designed for EN54 compliant fire systems and is NFS Approved.Available in either 1A 2A or 5A versions they are certified to EN54-4 EN12101-10 and NF S 61-940 by AFNOR and VdS EN54-4 only.The units include intelligent battery charging using Elmdenes efficient EcoCharge technology possess mains battery monitoring with 2x independent volt-free outputs and also feature battery deep discharge protection in the event of a prolonged mains failure.The inclusion of LED indicators provides quick status diagnostics of the power supply while a variety of enclosures offer the installer a choice of standby battery backup options.Key FeaturesEN54 Certified PSU for Fire SystemsHigh efficiency Switch Mode operationIntelligent Battery chargingMains Battery monitoring with independent volt free fault outputsDeep discharge protectionUser and Engineer diagnostic LED status indicationFit up to 2x17Ah batteriesE Box 420h x 400w x 80dHinge lid

GBP 259.36

1

Elmdene STV2402-C 24V d.c. PSU 27.6V 2 Amp To Load 0.3A Battery Charging

Elmdene STV2402-C 24V d.c. PSU 27.6V 2 Amp To Load 0.3A Battery ChargingThe new STV range of switch mode power supplies has been specifically designed for EN54 compliant fire systems and is NFS Approved.Available in either 1A 2A or 5A versions they are certified to EN54-4 EN12101-10 and NF S 61-940 by AFNOR and VdS EN54-4 only.The units include intelligent battery charging using Elmdenes efficient EcoCharge technology possess mains battery monitoring with 2x independent volt-free outputs and also feature battery deep discharge protection in the event of a prolonged mains failure.The inclusion of LED indicators provides quick status diagnostics of the power supply while a variety of enclosures offer the installer a choice of standby battery backup options.Key FeaturesEN54 Certified PSU for Fire SystemsHigh efficiency Switch Mode operationIntelligent Battery chargingMains Battery monitoring with independent volt free fault outputsDeep discharge protectionUser and Engineer diagnostic LED status indicationFit up to 2x7Ah batteriesC Box 275h x 330w x 80dHinge lid

GBP 184.55

1

Elmdene STV2405-C 24V d.c. PSU 27.6V 5 Amp To Load 0.8A Battery Charging

Elmdene STV2405-C 24V d.c. PSU 27.6V 5 Amp To Load 0.8A Battery ChargingThe new STV range of switch mode power supplies has been specifically designed for EN54 compliant fire systems and is NFS Approved.Available in either 1A 2A or 5A versions they are certified to EN54-4 EN12101-10 and NF S 61-940 by AFNOR and VdS EN54-4 only.The units include intelligent battery charging using Elmdenes efficient EcoCharge technology possess mains battery monitoring with 2x independent volt-free outputs and also feature battery deep discharge protection in the event of a prolonged mains failure.The inclusion of LED indicators provides quick status diagnostics of the power supply while a variety of enclosures offer the installer a choice of standby battery backup options.Key FeaturesEN54 Certified PSU for Fire SystemsHigh efficiency Switch Mode operationIntelligent Battery chargingMains Battery monitoring with independent volt free fault outputsDeep discharge protectionUser and Engineer diagnostic LED status indicationFit up to 2x7Ah batteriesC Box 275h x 330w x 80dHinge lid

GBP 228.52

1

Elmdene STV2405-K 24V d.c. PSU 27.6V 5 Amp To Load 0.8A Battery Charging

Elmdene STV2405-K 24V d.c. PSU 27.6V 5 Amp To Load 0.8A Battery ChargingThe new STV range of switch mode power supplies has been specifically designed for EN54 compliant fire systems and is NFS Approved.Available in either 1A 2A or 5A versions they are certified to EN54-4 EN12101-10 and NF S 61-940 by AFNOR and VdS EN54-4 only.The units include intelligent battery charging using Elmdenes efficient EcoCharge technology possess mains battery monitoring with 2x independent volt-free outputs and also feature battery deep discharge protection in the event of a prolonged mains failure.The inclusion of LED indicators provides quick status diagnostics of the power supply while a variety of enclosures offer the installer a choice of standby battery backup options.Key FeaturesEN54 Certified PSU for Fire SystemsHigh efficiency Switch Mode operationIntelligent Battery chargingMains Battery monitoring with independent volt free fault outputsDeep discharge protectionUser and Engineer diagnostic LED status indicationFit up to 2x17Ah batteries inc. 12AhK Box 325h x 350w x 105dHinge lid

GBP 245.68

1

Elmdene STV2402-H 24V d.c. PSU 27.6V 2 Amp To Load 0.8A Battery Charging

Elmdene STV2402-H 24V d.c. PSU 27.6V 2 Amp To Load 0.8A Battery ChargingThe new STV range of switch mode power supplies has been specifically designed for EN54 compliant fire systems and is NFS Approved.Available in either 1A 2A or 5A versions they are certified to EN54-4 EN12101-10 and NF S 61-940 by AFNOR and VdS EN54-4 only.The units include intelligent battery charging using Elmdenes efficient EcoCharge technology possess mains battery monitoring with 2x independent volt-free outputs and also feature battery deep discharge protection in the event of a prolonged mains failure.The inclusion of LED indicators provides quick status diagnostics of the power supply while a variety of enclosures offer the installer a choice of standby battery backup options.Key FeaturesEN54 Certified PSU for Fire SystemsHigh efficiency Switch Mode operationIntelligent Battery chargingMains Battery monitoring with independent volt free fault outputsDeep discharge protectionUser and Engineer diagnostic LED status indicationFit up to 2x38Ah batteriesH Box 420h x 420w x 180dHinge lid

GBP 232.69

1

Elmdene STV2402-E 24V d.c. PSU 27.6V 1.8 Amp To Load 0.7A Battery Charging

Elmdene STV2402-E 24V d.c. PSU 27.6V 1.8 Amp To Load 0.7A Battery ChargingThe new STV range of switch mode power supplies has been specifically designed for EN54 compliant fire systems and is NFS Approved.Available in either 1A 2A or 5A versions they are certified to EN54-4 EN12101-10 and NF S 61-940 by AFNOR and VdS EN54-4 only.The units include intelligent battery charging using Elmdenes efficient EcoCharge technology possess mains battery monitoring with 2x independent volt-free outputs and also feature battery deep discharge protection in the event of a prolonged mains failure.The inclusion of LED indicators provides quick status diagnostics of the power supply while a variety of enclosures offer the installer a choice of standby battery backup options.Key FeaturesEN54 Certified PSU for Fire SystemsHigh efficiency Switch Mode operationIntelligent Battery chargingMains Battery monitoring with independent volt free fault outputsDeep discharge protectionUser and Engineer diagnostic LED status indicationFit up to 2x17Ah batteriesE Box 420h x 400w x 80dHinge lid

GBP 209.48

1

Elmdene G13810BM-8-R 12V d.c. Switch Mode PSU 13.8V 10Amp To Load 0.5A Battery Charging

Elmdene G13810BM-8-R 12V d.c. Switch Mode PSU 13.8V 10Amp To Load 0.5A Battery ChargingIdeal for applications requiring mains and battery monitoring with fault outputs in addition to battery deep discharge protection.The G Range BM Series switch mode power supplies are ideal for applications requiring mains and battery monitoring. The units have a regulated highly stable output supplying full rated current to load and a universal mains voltage input range 90 to 264V ac.These units may be used for intruder systems where compliance with EN50131-6 is not required. They are also available in DIN rail mounted unboxed versions if required.FOM 4 or 8 can be fitted to give independent fused outputs.Key Features13.8V dc outputFull rated current to load 0.5A battery chargingMains and battery monitoring2x Volt free fault outputsLow battery warningBattery deep discharge protectionFront and rear tamper protectionDimensions 410 H x 390 W x 86 DBattery size 2 x 17AhPlease note The image is for illustrative purposes only. Please refer to the product description.

GBP 215.02

1

Elmdene STV2405-H 24V d.c. PSU 27.6V 5 Amp To Load 0.8A Battery Charging

Elmdene STV2405-H 24V d.c. PSU 27.6V 5 Amp To Load 0.8A Battery ChargingThe new STV range of switch mode power supplies has been specifically designed for EN54 compliant fire systems and is NFS Approved.Available in either 1A 2A or 5A versions they are certified to EN54-4 EN12101-10 and NF S 61-940 by AFNOR and VdS EN54-4 only.The units include intelligent battery charging using Elmdenes efficient EcoCharge technology possess mains battery monitoring with 2x independent volt-free outputs and also feature battery deep discharge protection in the event of a prolonged mains failure.The inclusion of LED indicators provides quick status diagnostics of the power supply while a variety of enclosures offer the installer a choice of standby battery backup options.Key FeaturesEN54 Certified PSU for Fire SystemsHigh efficiency Switch Mode operationIntelligent Battery charge up to 2x38Ah batteriesH Box 420h x 420w x 180dHinge lid

GBP 281.09

1

Elmdene G2405BM-C 24V Switch Mode PSU 27.6V 5Amp To Load 0.5A Battery Charging

Elmdene G2405BM-C 24V Switch Mode PSU 27.6V 5Amp To Load 0.5A Battery ChargingThe new 24V G Range BM Series power supplies has been designed for access control CCTV fire systems where compliance with EN54-4 is not required and general-purpose applications.The products use energy efficient switch mode technology and have a universal mains supply input 90264V ac.Elmdenes FOM4 or FOM8 units can be fitted to give 4 or 8 independent fused outputs if required.The modular range consists of 1A 2A 3A 5A and 10A power variants with full rated current to load and also feature a fully regulated output with low ripple and noise. Unboxed module only versions are also available if required with DIN rail mount options for 1A and 2A models.Elmdene products using switch mode technology are typically 80-87 efficient. This can save your customers money by reducing their energy bills and carbon footprint.Switch mode technology provides for lower power consumption provides cool running and energy efficient products that can result in improved long-term reliability.Key Features0.5A Battery Charging5Amp To Load24V Switch Mode PSU 27.6VEfficient Switch Mode operationMains and Battery monitoring with independent volt free fault outputsDeep discharge protectionMulti LED status indicationFit up to 2x7Ah batteryC Box 275h x 330w x 80dHinge lid27.6V dc outputCost effective switch mode technologyHigh energy efficient - reducing energy billsMains and battery monitoringVolt-free fault outputsModular construction means easy maintenance and upgradingFull rated current to load 0.8A battery charging90 to 264V ac rangeDeep discharge protectionElectronic overload protectionMains transient protection3 year warrantyPlease note The image is for illustrative purposes only.

GBP 168.23

1

Elmdene G2405BM-R 24V Switch Mode PSU 27.6V 5Amp To Load 0.5A Battery Charging

Elmdene G2405BM-R 24V Switch Mode PSU 27.6V 5Amp To Load 0.5A Battery ChargingThe new 24V G Range BM Series power supplies has been designed for access control CCTV fire systems where compliance with EN54-4 is not required and general-purpose applications.The products use energy efficient switch mode technology and have a universal mains supply input 90264V ac.Elmdenes FOM4 or FOM8 units can be fitted to give 4 or 8 independent fused outputs if required.The modular range consists of 1A 2A 3A 5A and 10A power variants with full rated current to load and also feature a fully regulated output with low ripple and noise. Unboxed module only versions are also available if required with DIN rail mount options for 1A and 2A models.Elmdene products using switch mode technology are typically 80-87 efficient. This can save your customers money by reducing their energy bills and carbon footprint.Switch mode technology provides for lower power consumption provides cool running and energy efficient products that can result in improved long-term reliability.Key Features0.5A Battery Charging5Amp To Load24V Switch Mode PSU 27.6VEfficient Switch Mode operationMains and Battery monitoring with independent volt free fault outputsDeep discharge protectionMulti LED status indicationFit up to 2x17Ah batteryR Box 410h x 390w x 90dClam lid27.6V dc outputCost effective switch mode technologyHigh energy efficient - reducing energy billsMains and battery monitoringVolt-free fault outputsModular construction means easy maintenance and upgradingFull rated current to load 0.8A battery charging90 to 264V ac rangeDeep discharge protectionElectronic overload protectionMains transient protection3 year warrantyPlease note The image is for illustrative purposes only.

GBP 186.98

1

Elmdene G2402BM-C 24V Switch Mode PSU 27.6V 2Amp To Load 0.5A Battery Charging

Elmdene G2402BM-C 24V Switch Mode PSU 27.6V 2Amp To Load 0.5A Battery ChargingThe new 24V G Range BM Series power supplies has been designed for access control CCTV fire systems where compliance with EN54-4 is not required and general-purpose applications.The products use energy efficient switch mode technology and have a universal mains supply input 90264V ac.Elmdenes FOM4 or FOM8 units can be fitted to give 4 or 8 independent fused outputs if required.The modular range consists of 1A 2A 3A 5A and 10A power variants with full rated current to load and also feature a fully regulated output with low ripple and noise. Unboxed module only versions are also available if required with DIN rail mount options for 1A and 2A models.Elmdene products using switch mode technology are typically 80-87 efficient. This can save your customers money by reducing their energy bills and carbon footprint.Switch mode technology provides for lower power consumption provides cool running and energy efficient products that can result in improved long-term reliability.Key Features24V Switch Mode PSU 27.6V2Amp To Load 0.5A Battery ChargingEfficient Switch Mode operationMains and Battery monitoring with independent volt free fault outputsDeep discharge protectionMulti LED status indicationFit up to 2x7Ah batteryC Box 275h x 330w x 80dHinge lid27.6V dc outputCost effective switch mode technologyHigh energy efficient - reducing energy billsMains and battery monitoringVolt-free fault outputsModular construction means easy maintenance and upgradingFull rated current to load 0.8A battery charging90 to 264V ac rangeDeep discharge protectionElectronic overload protectionMains transient protection3 year warrantyPlease note The image is for illustrative purposes only.

GBP 118.36

1

Awardvindende Google Marketing Powerhouse

Brand

Merchant

Price (EUR)