233 results (0,14294 seconds)

Show all filters

Brand

Merchant

Price (EUR)

Show all

Reset filter

Products
From
Shops

Elmdene 2405ST-E PSU

Elmdene 2405ST-E PSU

Elmdene 2405ST-E PSUThe ST range of switch mode power supplies has been specifically designed for EN54 compliant fire systems and EN12101 AOV systems. Available in either 1A 2A or 5A versions they are certified to EN54-4 and EN12101-10 by AFNOR and VdS EN54-4 only.The units include intelligent battery charging using Elmdenes efficient EcoCharge technology possess mains battery monitoring with 2x independent volt-free outputs and also feature battery deep discharge protection in the event of a prolonged mains failure.The inclusion of LED indicators provides quick status diagnostics of the power supply while a variety of enclosures offer the installer a choice of standby battery backup options.Key Features 2 Independant 27.6Vdc monitored output Battery Free operation mode available not EN54-4 compliant Self-resetting battery fuse protection No output interruption during automatic switchover between mains and battery power Deep discharge protection disconnects battery from load when output voltage falls below 21.6V Mains status indicator LED confirms mains input is present Battery status indicator LED confirms healthy battery Fault indicator LED Yellow active on detection of output fault charger fault and mains failure Fault-diagnostic indicator LED assists with identifying cause of fault visible through Lid Output 1 and Output 2 status indicator LEDs dual-path and independent mode option

GBP 259.36
1

Elmdene 2405ST-H PSU

Elmdene 2405ST-H PSU

Elmdene 2405ST-H PSUThe ST range of switch mode power supplies has been specifically designed for EN54 compliant fire systems and EN12101 AOV systems. Available in either 1A 2A or 5A versions they are certified to EN54-4 and EN12101-10 by AFNOR and VdS EN54-4 only.The units include intelligent battery charging using Elmdenes efficient EcoCharge technology possess mains battery monitoring with 2x independent volt-free outputs and also feature battery deep discharge protection in the event of a prolonged mains failure.The inclusion of LED indicators provides quick status diagnostics of the power supply while a variety of enclosures offer the installer a choice of standby battery backup options.Key Features 2 Independant 27.6Vdc monitored output Battery Free operation mode available not EN54-4 compliant Self-resetting battery fuse protection No output interruption during automatic switchover between mains and battery power Deep discharge protection disconnects battery from load when output voltage falls below 21.6V Mains status indicator LED confirms mains input is present Battery status indicator LED confirms healthy battery Fault indicator LED Yellow active on detection of output fault charger fault and mains failure Fault-diagnostic indicator LED assists with identifying cause of fault visible through Lid Output 1 and Output 2 status indicator LEDs dual-path and independent mode option

GBP 281.09
1

Elmdene 2405ST-K PSU

Elmdene 2405ST-K PSU

Elmdene 2405ST-K PSUThe ST range of switch mode power supplies has been specifically designed for EN54 compliant fire systems and EN12101 AOV systems. Available in either 1A 2A or 5A versions they are certified to EN54-4 and EN12101-10 by AFNOR and VdS EN54-4 only.The units include intelligent battery charging using Elmdenes efficient EcoCharge technology possess mains battery monitoring with 2x independent volt-free outputs and also feature battery deep discharge protection in the event of a prolonged mains failure.The inclusion of LED indicators provides quick status diagnostics of the power supply while a variety of enclosures offer the installer a choice of standby battery backup options.Key Features 2 Independant 27.6Vdc monitored output Battery Free operation mode available not EN54-4 compliant Self-resetting battery fuse protection No output interruption during automatic switchover between mains and battery power Deep discharge protection disconnects battery from load when output voltage falls below 21.6V Mains status indicator LED confirms mains input is present Battery status indicator LED confirms healthy battery Fault indicator LED Yellow active on detection of output fault charger fault and mains failure Fault-diagnostic indicator LED assists with identifying cause of fault visible through Lid Output 1 and Output 2 status indicator LEDs dual-path and independent mode option

GBP 245.68
1

Elmdene 2402ST-C PSU

Elmdene 2402ST-C PSU

Elmdene 2402ST-C PSUThe ST range of switch mode power supplies has been specifically designed for EN54 compliant fire systems and EN12101 AOV systems. Available in either 1A 2A or 5A versions they are certified to EN54-4 and EN12101-10 by AFNOR and VdS EN54-4 only.The units include intelligent battery charging using Elmdenes efficient EcoCharge technology possess mains battery monitoring with 2x independent volt-free outputs and also feature battery deep discharge protection in the event of a prolonged mains failure.The inclusion of LED indicators provides quick status diagnostics of the power supply while a variety of enclosures offer the installer a choice of standby battery backup options.Key Features2 Independent 27.6Vdc monitored outputBattery Free operation mode available not EN54-4 compliantSelf-resetting battery fuse protectionNo output interruption during automatic switchover between mains and battery powerDeep discharge protection disconnects battery from load when output voltage falls below 21.6VMains status indicator LED confirms mains input is presentBattery status indicator LED confirms healthy batteryFault indicator LED Yellow active on detection of output fault charger fault and mains failureFault-diagnostic indicator LED assists with identifying cause of fault visible through LidOutput 1 and Output 2 status indicator LEDs dual-path and independent mode optionPlease note this image is for illustrative purposes only.

GBP 184.55
1

Elmdene 2401ST-C PSU

Elmdene 2401ST-C PSU

Elmdene 2401ST-C PSUThe ST range of switch mode power supplies has been specifically designed for EN54 compliant fire systems and EN12101 AOV systems. Available in either 1A 2A or 5A versions they are certified to EN54-4 and EN12101-10 by AFNOR and VdS EN54-4 only.The units include intelligent battery charging using Elmdenes efficient EcoCharge technology possess mains battery monitoring with 2x independent volt-free outputs and also feature battery deep discharge protection in the event of a prolonged mains failure.The inclusion of LED indicators provides quick status diagnostics of the power supply while a variety of enclosures offer the installer a choice of standby battery backup options.Key Features 2 Independant 27.6Vdc monitored output Battery Free operation mode available not EN54-4 compliant Self-resetting battery fuse protection No output interruption during automatic switchover between mains and battery power Deep discharge protection disconnects battery from load when output voltage falls below 21.6V Mains status indicator LED confirms mains input is present Battery status indicator LED confirms healthy battery Fault indicator LED Yellow active on detection of output fault charger fault and mains failure Fault-diagnostic indicator LED assists with identifying cause of fault visible through Lid Output 1 and Output 2 status indicator LEDs dual-path and independent mode option

GBP 169.78
1

Elmdene 2405ST-MOD PSU

Elmdene 2405ST-MOD PSU

Elmdene 2405ST-MOD PSUThe ST range of switch mode power supplies has been specifically designed for EN54 compliant fire systems and EN12101 AOV systems. Available in either 1A 2A or 5A versions they are certified to EN54-4 and EN12101-10 by AFNOR and VdS EN54-4 only.The units include intelligent battery charging using Elmdenes efficient EcoCharge technology possess mains battery monitoring with 2x independent volt-free outputs and also feature battery deep discharge protection in the event of a prolonged mains failure.The inclusion of LED indicators provides quick status diagnostics of the power supply while a variety of enclosures offer the installer a choice of standby battery backup options.Key Features 2 Independant 27.6Vdc monitored output Battery Free operation mode available not EN54-4 compliant Self-resetting battery fuse protection No output interruption during automatic switchover between mains and battery power Deep discharge protection disconnects battery from load when output voltage falls below 21.6V Mains status indicator LED confirms mains input is present Battery status indicator LED confirms healthy battery Fault indicator LED Yellow active on detection of output fault charger fault and mains failure Fault-diagnostic indicator LED assists with identifying cause of fault visible through Lid Output 1 and Output 2 status indicator LEDs dual-path and independent mode option

GBP 156.01
1

Elmdene VRS125000EB-4 12Vdc 5A Encapsulated CCTV SMPSU with 4-Way Splitter Cable - UK Plug

Elmdene VRS125000EB-4 12Vdc 5A Encapsulated CCTV SMPSU with 4-Way Splitter Cable - UK Plug

Elmdene VRS125000EB-4 12Vdc 5A Encapsulated CCTV SMPSU with 4-Way Splitter Cable - UK PlugThe VRS125000EB-4 is part of a family of Encapsulated high efficiency DC power supplies ideal for CCTV applications. There are six models in the 12Vdc range between 0.5A and 5.0A and two models in the 24Vdc range 0.5A and 1.0A.All models are available with a European or UK mains plug and with the option of a 2.1mm or 2.5mm dc output connector.The units feature a universal main input voltage range from 100 to 240V ac and includes electronic short circuit protection and mains status indication 3.5A and 5A models only. They also use high efficiency switch mode operation which means lower running temperature and lower running costs.The 2A 3.5A and 5A versions are available with a 4-way 2.1mm dc output splitter as an option.Elmdenes Vision range feature highly stable closely regulated 12V dc outputs at full rated current to load. The products are designed to provide reliability and performance with low maintenance and operational costs.Key Features4-Way Splitter CableUK PlugFully regulated 12Vdc output500mA 1A 1.5A 2A 3.5A and 5A outputs availableElectronic overload and short circuit ProtectionClass II double insulatedIdeal for CCTV camera installationsUK and European mains lead versionsHigh efficiency switch mode operationFull rated current to loadElectronic short circuit protectionMains status indication 3.5A 5AUniversal 100 240V ac mains supplyCompact size2.1mm dc output jack socket on flying lead4-way 2.1mm dc output splitter available3 year warranty

GBP 19.98
1

Elmdene VRS123500EB 12Vdc Switch Mode PSU 3.5Amp - Output Flying Lead Fitted with 2.1mm Jack Connector

Elmdene VRS123500EB 12Vdc Switch Mode PSU 3.5Amp - Output Flying Lead Fitted with 2.1mm Jack Connector

Elmdene VRS123500EB 12Vdc Switch Mode PSU 3.5Amp - Output Flying Lead Fitted with 2.1mm Jack ConnectorThe VRS123500EB is part of a family of Encapsulated high efficiency DC power supplies ideal for CCTV applications. There are six models in the 12Vdc range between 0.5A and 5.0A and two models in the 24Vdc range 0.5A and 1.0A.All models are available with a European or UK mains plug and with the option of a 2.1mm or 2.5mm dc output connector.The units feature a universal main input voltage range from 100 to 240V ac and includes electronic short circuit protection and mains status indication 3.5A and 5A models only. They also use high efficiency switch mode operation which means lower running temperature and lower running costs.The 2A 3.5A and 5A versions are available with a 4-way 2.1mm dc output splitter as an option.Elmdenes Vision range feature highly stable closely regulated 12V dc outputs at full rated current to load. The products are designed to provide reliability and performance with low maintenance and operational costs.Key FeaturesEncapsulated in plastic case4-Way Splitter CableUK Plug - mains - moulded UKEBEuropean EE Plug - Size 120x50x30Ideal for CCTVOutput flying lead fitted with 2.1mm jack connectorFully regulated 12Vdc output500mA 1A 1.5A 2A 3.5A and 5A outputs availableElectronic overload and short circuit ProtectionClass II double insulatedIdeal for CCTV camera installationsUK and European mains lead versionsHigh efficiency switch mode operationFull rated current to loadElectronic short circuit protectionMains status indication 3.5A 5AUniversal 100 240V ac mains supplyCompact size2.1mm dc output jack socket on flying lead4-way 2.1mm dc output splitter available3 year warranty

GBP 15.90
1

Elmdene VRS122000EB 12V d.c. Switch Mode PSU - 2Amp - Mains Moulded UK Plug

Elmdene VRS122000EB 12V d.c. Switch Mode PSU - 2Amp - Mains Moulded UK Plug

Elmdene VRS122000EB 12V d.c. Switch Mode PSU - 2Amp - Mains Moulded UK PlugThe VRS122000EB is part of a family of Encapsulated high efficiency DC power supplies ideal for CCTV applications. There are six models in the 12Vdc range between 0.5A and 5.0A and two models in the 24Vdc range 0.5A and 1.0A.All models are available with a European or UK mains plug and with the option of a 2.1mm or 2.5mm dc output connector.The units feature a universal main input voltage range from 100 to 240V ac and includes electronic short circuit protection and mains status indication 3.5A and 5A models only. They also use high efficiency switch mode operation which means lower running temperature and lower running costs.The 2A 3.5A and 5A versions are available with a 4-way 2.1mm dc output splitter as an option.Elmdenes Vision range feature highly stable closely regulated 12V dc outputs at full rated current to load. The products are designed to provide reliability and performance with low maintenance and operational costs.Key FeaturesEncapsulated in plastic caseIdeal for CCTVOutput flying lead fitted with 2.1mm jack connectorMains - moulded UK PlugSize 78x52x25Fully regulated 12Vdc output500mA 1A 1.5A 2A 3.5A and 5A outputs availableElectronic overload and short circuit ProtectionClass II double insulatedIdeal for CCTV camera installationsUK and European mains lead versionsHigh efficiency switch mode operationFull rated current to loadElectronic short circuit protectionMains status indication 3.5A 5AUniversal 100 240V ac mains supplyCompact size2.1mm dc output jack socket on flying lead4-way 2.1mm dc output splitter available3 year warranty

GBP 14.10
1

Elmdene VRS125000EB 12V d.c. Switch Mode PSU - 5Amp - Mains Moulded UK Plug

Elmdene VRS125000EB 12V d.c. Switch Mode PSU - 5Amp - Mains Moulded UK Plug

Elmdene VRS125000EB 12V d.c. Switch Mode PSU - 5Amp - Mains Moulded UK PlugThe VRS125000EB is part of a family of Encapsulated high efficiency DC power supplies ideal for CCTV applications. There are six models in the 12Vdc range between 0.5A and 5.0A and two models in the 24Vdc range 0.5A and 1.0A.All models are available with a European or UK mains plug and with the option of a 2.1mm or 2.5mm dc output connector.The units feature a universal main input voltage range from 100 to 240V ac and includes electronic short circuit protection and mains status indication 3.5A and 5A models only. They also use high efficiency switch mode operation which means lower running temperature and lower running costs.The 2A 3.5A and 5A versions are available with a 4-way 2.1mm dc output splitter as an option.Elmdenes Vision range feature highly stable closely regulated 12V dc outputs at full rated current to load. The products are designed to provide reliability and performance with low maintenance and operational costs.Key Features5AmpMains Moulded UK PlugEncapsulated in plastic caseIdeal for CCTVOutput flying lead fitted with 2.1mm jack connectorSize 120x50x30Fully regulated 12Vdc output500mA 1A 1.5A 2A 3.5A and 5A outputs availableElectronic overload and short circuit ProtectionClass II double insulatedIdeal for CCTV camera installationsUK and European mains lead versionsHigh efficiency switch mode operationFull rated current to loadElectronic short circuit protectionMains status indication 3.5A 5AUniversal 100 240V ac mains supplyCompact size2.1mm dc output jack socket on flying lead4-way 2.1mm dc output splitter available3 year warranty

GBP 18.17
1

Elmdene 2402ST-K PSU

Elmdene 2402ST-K PSU

Elmdene 2402ST-K PSUThe ST range of switch mode power supplies has been specifically designed for EN54 compliant fire systems and EN12101 AOV systems. Available in either 1A 2A or 5A versions they are certified to EN54-4 and EN12101-10 by AFNOR and VdS EN54-4 only.The units include intelligent battery charging using Elmdenes efficient EcoCharge technology possess mains battery monitoring with 2x independent volt-free outputs and also feature battery deep discharge protection in the event of a prolonged mains failure.The inclusion of LED indicators provides quick status diagnostics of the power supply while a variety of enclosures offer the installer a choice of standby battery backup options.Key Features 2 Independant 27.6Vdc monitored output Battery Free operation mode available not EN54-4 compliant Self-resetting battery fuse protection No output interruption during automatic switchover between mains and battery power Deep discharge protection disconnects battery from load when output voltage falls below 21.6V Mains status indicator LED confirms mains input is present Battery status indicator LED confirms healthy battery Fault indicator LED Yellow active on detection of output fault charger fault and mains failure Fault-diagnostic indicator LED assists with identifying cause of fault visible through Lid Output 1 and Output 2 status indicator LEDs dual-path and independent mode optionPlease note this image is for illustrative purposes only.

GBP 197.96
1

Elmdene 2401ST-MOD PSU

Elmdene 2401ST-MOD PSU

Elmdene 2401ST-MOD PSUThe ST range of switch mode power supplies has been specifically designed for EN54 compliant fire systems and EN12101 AOV systems. Available in either 1A 2A or 5A versions they are certified to EN54-4 and EN12101-10 by AFNOR and VdS EN54-4 only.The units include intelligent battery charging using Elmdenes efficient EcoCharge technology possess mains battery monitoring with 2x independent volt-free outputs and also feature battery deep discharge protection in the event of a prolonged mains failure.The inclusion of LED indicators provides quick status diagnostics of the power supply while a variety of enclosures offer the installer a choice of standby battery backup options.Key Features 2 Independent 27.6Vdc monitored output Battery Free operation mode available not EN54-4 compliant Self-resetting battery fuse protection No output interruption during automatic switchover between mains and battery power Deep discharge protection disconnects battery from load when output voltage falls below 21.6V Mains status indicator LED confirms mains input is present Battery status indicator LED confirms healthy battery Fault indicator LED Yellow active on detection of output fault charger fault and mains failure Fault-diagnostic indicator LED assists with identifying cause of fault visible through Lid Output 1 and Output 2 status indicator LEDs dual-path and independent mode optionPlease note This image is for illustrative purposes only.

GBP 137.09
1

Elmdene 2402ST-H PSU

Elmdene 2402ST-H PSU

Elmdene 2402ST-H PSUThe ST range of switch mode power supplies has been specifically designed for EN54 compliant fire systems and EN12101 AOV systems. Available in either 1A 2A or 5A versions they are certified to EN54-4 and EN12101-10 by AFNOR and VdS EN54-4 only.The units include intelligent battery charging using Elmdenes efficient EcoCharge technology possess mains battery monitoring with 2x independent volt-free outputs and also feature battery deep discharge protection in the event of a prolonged mains failure.The inclusion of LED indicators provides quick status diagnostics of the power supply while a variety of enclosures offer the installer a choice of standby battery backup options.Key Features 2 Independant 27.6Vdc monitored output Battery Free operation mode available not EN54-4 compliant Self-resetting battery fuse protection No output interruption during automatic switchover between mains and battery power Deep discharge protection disconnects battery from load when output voltage falls below 21.6V Mains status indicator LED confirms mains input is present Battery status indicator LED confirms healthy battery Fault indicator LED Yellow active on detection of output fault charger fault and mains failure Fault-diagnostic indicator LED assists with identifying cause of fault visible through Lid Output 1 and Output 2 status indicator LEDs dual-path and independent mode optionPlease note this image is for illustrative purposes only.

GBP 232.69
1

Elmdene EN3-JB26 Junction Box - 24 Terminals Plus Micro Switch Tamper White Pack of 10

Elmdene EN3-JB26 Junction Box - 24 Terminals Plus Micro Switch Tamper White Pack of 10

Elmdene EN3-JB26 Junction Box - 24 Terminals Plus Micro Switch Tamper White Pack of 10The EN range of Junction Boxes feature a high reliability spring action micro switch for the lid tamper so now your engineers can confidently connect the tamper when using a junction box maintaining the security and integrity of the system and indeed the reputation of your company. The Junction Boxes are designed to meet PD66622004 A1 A2 BS EN 50131-12006 and the environmental testing requirements of EN 50131-2- 22008 Class II or III as indicated.Key FeaturesDimensions 125L x 100w x 45dColour White

GBP 60.14
1

Elmdene RAPIER-6510 External Sounder - Grade 3 - Twin Piezo - Twin Strobe amp Twin Comfort LED

Elmdene RAPIER-6510 External Sounder - Grade 3 - Twin Piezo - Twin Strobe amp Twin Comfort LED

Elmdene RAPIER-6510 External Sounder - Grade 3 - Twin Piezo - Twin Strobe Twin Comfort LEDThe Rapier 6510 sounder fully meets the requirements of EN50131-42009 Grade 3 and 4.The sounder includes a diagnostic LED audible front and rear tamper status versatile trigger options and control panel dependent end of line resistors also help make installation easier.The Rapier 6510 sounder can be mounted in portrait or landscape orientation giving real flexibility. This is now made easier with the inclusion of two internal spirit levels. The stainless steel covers clean lines gives a smart and aesthetically-pleasing look to the unit.Approvals CertificationEN50131-12006EN50131-42009EN61000-6-3PD66622017INCERT

GBP 105.12
1

Elmdene INT500S EN50131-4 Security Grade 2 Dual Internal Live Sounder

Elmdene INT500S EN50131-4 Security Grade 2 Dual Internal Live Sounder

Elmdene INT500S EN50131-4 Security Grade 2 Dual Internal Live SounderThe INT500S sounder is used for notification of an alarm condition and entryexit tone as generated within an intruder hold-up or other alarm system. In response to appropriate commands from the control panel the INT500S will emit a high intensity sound for alarm and an adjustable low-level tone for entryexitkeypad.This device will detect any attempt to gain unauthorised access to the sounder by removal of the cover or any attempt to remove it away from its mounting surface. This will generate a tamper signal which is normally fed back to the alarm control panel.The INT500S is classified as an internal self-powered sounder and has an on-board battery which is recharged via the external power source. This battery is used to operate the sounder if the external power to the sounder is removed.The sound output for all models is 110dBA. They have a low current consumption and feature engineer mode for silent start up. High and low level sounder functions are triggered independently for alarm notification and entryexit tones as required low level sounder is fitted with a volume control which can be set to individual requirements.The devices feature a modern stylish polycarbonate cover.Key FeaturesDual Internal Sounder for Intruder SystemsGrade 2Single speaker 108db 1mSAB operationDual HiLo output for EntryExit and Alarm modes15min cut-off timerPolycarbonate Cover and backplate160h x 110w x 40d12V dc operationEnvironmental class IITough polycarbonate cover and backplateFront and rear tamperIndependent low-level entryexit sound output 500600Selectable 15m timer for sounder output3 year warrantyHigh low level sounder with strobeAttractively designed range of Internal SoundersDesirable appearance for domestic applicationsEngineer Friendly for easy installation and maintenanceIdeal for multiple residential installationsLow current consumptionPlease note The image is for illustrative purposes only. Please contact us for further information.

GBP 30.64
1

Elmdene INT400S EN50131-4 Security Grade 2 Internal Live Sounder

Elmdene INT400S EN50131-4 Security Grade 2 Internal Live Sounder

Elmdene INT400S EN50131-4 Security Grade 2 Internal Live SounderThe INT400S sounder is used for notification of an alarm condition and entryexit tone as generated within an intruder hold-up or other alarm system. In response to appropriate commands from the control panel the INT400S will emit a high intensity sound for alarm and an adjustable low-level tone for entryexitkeypad.This device will detect any attempt to gain unauthorised access to the sounder by removal of the cover or any attempt to remove it away from its mounting surface. This will generate a tamper signal which is normally fed back to the alarm control panel.The INT400S is classified as an internal self-powered sounder and has an on-board battery which is recharged via the external power source. This battery is used to operate the sounder if the external power to the sounder is removed.The sound output for all models is 110dBA. They have a low current consumption and feature engineer mode for silent start up. High and low level sounder functions are triggered independently for alarm notification and entryexit tones as required low level sounder is fitted with a volume control which can be set to individual requirements.The devices feature a modern stylish polycarbonate cover.Key FeaturesInternal Sounder for Intruder SystemsGrade 2Single speaker 108db 1mSAB operationDual HiLo output for EntryExit and Alarm modes15min cut-off timerPolycarbonate Cover and backplate160h x 110w x 40d12V dc operationEnvironmental class IITough polycarbonate cover and backplateFront and rear tamperIndependent low-level entryexit sound output 500600Selectable 15m timer for sounder output3 year warrantyHigh low level sounder with strobeAttractively designed range of Internal SoundersDesirable appearance for domestic applicationsEngineer Friendly for easy installation and maintenanceIdeal for multiple residential installationsLow current consumptionPlease note The image is for illustrative purposes only. Please contact us for further information.

GBP 22.49
1

Elmdene INT600S EN50131-4 Security Grade 2 Dual Internal Live Sounder

Elmdene INT600S EN50131-4 Security Grade 2 Dual Internal Live Sounder

Elmdene INT600S EN50131-4 Security Grade 2 Dual Internal Live SounderThe INT600S sounder is used for notification of an alarm condition and entryexit tone as generated within an intruder hold-up or other alarm system. In response to appropriate commands from the control panel the INT600 will emit a high intensity sound for alarm and an adjustable low-level tone for entryexitkeypad.This device will detect any attempt to gain unauthorised access to the sounder by removal of the cover or any attempt to remove it away from its mounting surface. This will generate a tamper signal which is normally fed back to the alarm control panel. The INT600S is classified as an internal remote powered sounder and is powered via an external power source.The INT600S is classified as an internal self-powered sounder and has an on-board battery which is recharged via the external power source. This battery is used to operate the sounder if the external power to the sounder is removed.The sound output for all models is 110dBA. They have a low current consumption and feature engineer mode for silent start up. High and low level sounder functions are triggered independently for alarm notification and entryexit tones as required low level sounder is fitted with a volume control which can be set to individual requirements.The devices feature a modern stylish polycarbonate cover.Key FeaturesDual Internal Sounder for Intruder SystemsGrade 2Single speaker 108db 1mSAB operationDual HiLo output for EntryExit and Alarm modes15min cut-off timerPolycarbonate Cover and backplate160h x 110w x 40d12V dc operationEnvironmental class IITough polycarbonate cover and backplateFront and rear tamperIndependent low-level entryexit sound output 500600Selectable 15m timer for sounder output3 year warrantyHigh low level sounder with strobeAttractively designed range of Internal SoundersDesirable appearance for domestic applicationsEngineer Friendly for easy installation and maintenanceIdeal for multiple residential installationsLow current consumptionPlease note The image is for illustrative purposes only. Please contact us for further information.

GBP 25.43
1

Elmdene EN3-JB9-HD Junction Box - Heavy Duty - White Pack of 10

Elmdene EN3-JB9-HD Junction Box - Heavy Duty - White Pack of 10

Elmdene EN3-JB9-HD Junction Box - Heavy Duty - WhitePack of 10It is ideal for Roller Shutter Contacts Door Loops etc 7 terminals plus micro-switch tamper.The EN range of Junction Boxes feature a high reliability spring action micro switch for the lid tamper so now your engineers can confidently connect the tamper when using a junction box maintaining the security and integrity of the system and indeed the reputation of your company. The Junction Boxes are designed to meet PD66622004 A1 A2 BS EN 50131-12006 and the environmental testing requirements of EN 50131-2- 22008 Class II or III as indicated.Key FeaturesDimensions 94L x 40w x 25dColour WhiteShrouded spring action microswitch tamperClamp style terminals except EN3-JB9-HDAccommodates various wiring systemscabletrunkingconduitAvailable in white or brown except EN3-JB26EN3-JB9-HD is a heavy-duty water resistant unit ideal for roller shutter contacts and door loops5 year warranty

GBP 51.41
1

Elmdene VRS123500EE 12V d.c. Switch Mode PSU 3.5Amp. Encapsulated In Plastic Case

Elmdene VRS123500EE 12V d.c. Switch Mode PSU 3.5Amp. Encapsulated In Plastic Case

Elmdene VRS123500EE 12V d.c. Switch Mode PSU 3.5Amp. Encapsulated In Plastic CaseElmdenes Vision 12V dc encapsulated power supplies have been designed specifically for CCTV applications. The range comprises of 1A 2A 3.5A and 5A models. The units feature a universal mains input voltage range from 100 to 240V ac and includes electronic short circuit protection and mains status indication 3.5A and 5A models only. They also use high efficiency switch mode operation which means lower running temperature and lower running costs.The units have a neat and compact design and come fitted with either a UK or Euro mains plug. The 2A 3.5A and 5A versions are available with a 4-way 2.1mm dc output splitter as an option. Elmdenes Vision range feature highly stable closely regulated 12V dc outputs at full rated current to load. The products are designed to provide reliability and performance with low maintenance and operational costs.Key FeaturesIdeal for CCTVOutput flying lead fitted with 2.1mm jack connectorMains - moulded UKEBEuropean PlugEESize 120x50x30

GBP 17.81
1

Elmdene EN3-LSC-RD Surface Contact - Grade 3 - Large - Plastic White - Pack of 10

Elmdene EN3-LSC-RD Surface Contact - Grade 3 - Large - Plastic White - Pack of 10

Elmdene EN3-LSC-RD Surface Contact - Grade 3 - Large - Plastic White - Pack of 10Elmdene offer an extensive range of high-quality magnetic contacts for intruder and access control systems including the CPNI Approved Grade 3 EN3-RSA and High Security VS303.The EN3-LSC-RD is grade 3 and features a plastic white exterior.Key Features7mm operating gapPotted with 1m of cableIntegral 4k72k2 resistors93L x 25w x 25dSurface mountingFSL and double pole operation modeIdeal for single or multiple doors5-year warrantyPlease note The image is for illustrative purposes only. Please contact us for further information.

GBP 140.95
1

Elmdene EN3-LSC-GN Surface Contact - Grade 3 - Large - Plastic White - Pack of 10

Elmdene EN3-LSC-GN Surface Contact - Grade 3 - Large - Plastic White - Pack of 10

Elmdene EN3-LSC-GN Surface Contact - Grade 3 - Large - Plastic WhiteElmdene offer an extensive range of high-quality magnetic contacts for intruder and access control systems including the CPNI Approved Grade 3 EN3-RSA and High Security VS303. The EN3-LSC-GN is grade 3 and features a plastic white exterior.Key Features7mm operating gapPotted with 1m of cableIntegral 1k1k resistors93L x 25w x 25dSurface mountingFSL and double pole operation modeIdeal for single or multiple doors5-year warrantyPlease note The image is for illustrative purposes only. Please contact us for further information.

GBP 140.95
1

Elmdene FOM8-DIN 8 Way Fused Output Module

Elmdene FOM8-DIN 8 Way Fused Output Module

Elmdene FOM8-DIN 8 Way Fused Output ModuleElmdenes new Fused Output Modules FOMs are available in three standard variants. FOM4 4 x 1A FOM8 8 x 500mA and the DIN rail mountable FOM8-DIN 8 x 1A.Particularly useful in CCTV applications it gives the installer the provision of up to 8 independently fused outputs extremely useful when powering multiple devices.Each output possesses its own health status LED indication which provides quick identification of any blown fuses. The DIN rail version also offers an onboard switch enabling the user to turn off the outputs allowing for safe installation and maintenance activities to be conducted.The FOM4 and FOM8 are provided with self-adhesive mounts while the DIN rail mountable version has the option to be either DIN rail or screw mounted. These devices are ideal for modular applications such as rack installations or for use within existing PSU enclosures.Key Features4 or 8 individually fused outputsFuse health LED indicationPTC Fuse versions availableDIN rail mountableSwitchable supply inputFlexible low-cost solution

GBP 23.08
1

Elmdene INT600 EN50131-4 Security Grade 3 Dual Internal Live Sounder

Elmdene INT600 EN50131-4 Security Grade 3 Dual Internal Live Sounder

Elmdene INT600 EN50131-4 Security Grade 3 Dual Internal Live SounderThe INT600 sounder is used for notification of an alarm condition and entryexit tone as generated within an intruder hold-up or other alarm system. In response to appropriate commands from the control panel the INT600 will emit a high intensity sound for alarm and an adjustable low level tone for entryexitkeypad.This device will detect any attempt to gain unauthorised access to the sounder by removal of the cover or any attempt to remove it away from its mounting surface. This will generate a tamper signal which is normally fed back to the alarm control panel. The INT600 is classified as an internal remote powered sounder and is powered via an external power source.The sound output for all models is 110dBA. They have a low current consumption and feature engineer mode for silent start up. High and low level sounder functions are triggered independently for alarm notification and entryexit tones as required low level sounder is fitted with a volume control which can be set to individual requirements.The device features a modern stylish polycarbonate cover.Key FeaturesDual Internal Sounder for Intruder SystemsGrade 3Single speaker 108db 1mDual HiLo output for EntryExit and Alarm modes15min cut-off timerPolycarbonate Cover and backplate 160h x 110w x 40d12V dc operationEnvironmental class IITough polycarbonate cover and backplateFront and rear tamperIndependent low-level entryexit sound output 500600Selectable 15m timer for sounder output3 year warrantyHigh low level sounder with strobeAttractively designed range of Internal SoundersDesirable appearance for domestic applicationsEngineer Friendly for easy installation and maintenanceIdeal for multiple residential installationsLow current consumptionPlease note The image is for illustrative purposes only. Please contact us for further information.

GBP 21.85
1