edge reol from GBP 15 | See the cheapest prices and offers on css.lazzaweb.dk

FAMAG 3mm HSS Clip-on 2 Edge Countersink

3mm HSS Clip-on 2 Edge Countersink, 2101030 Countersink with two edges and point angle 90, to be clipped on drill bits. Drilling and countersinking in one single operation. For fitting on drill bits. Suitable for soft wood, European hard wood, veneered panels and plastics like acrylic glass, Corian, GFRP, HPL coating, polycarbonate, PVC and Trespa board, 2100, 210103000

GBP 62.99

1

FAMAG 6MM Classic Clip-on 5 Edge Countersink

6mm Classic Clip-on 5 Edge Countersink, 2100065 ountersink with five edges and point angle 90, to be clipped on drill bits, incl. allen key, without drill bit. Drilling and countersinking in one single operation. For clipping on drill bits with the appropriate . Very suitable for soft wood and veneered panels, for European hard wood only limited applicable, 2100, 210006500

GBP 19.99

1

FAMAG 3mm Classic Clip-on 5 Edge Countersink

3mm Classic Clip-on 5 Edge Countersink, 2100035 ountersink with five edges and point angle 90, to be clipped on drill bits, incl. allen key, without drill bit. Drilling and countersinking in one single operation. For clipping on drill bits with the appropriate . Very suitable for soft wood and veneered panels, for European hard wood only limited applicable, 2100, 210003500

GBP 18.99

1

FAMAG 3mm Classic Clip-on 5 Edge Countersink

3mm Classic Clip-on 5 Edge Countersink, 2100030 ountersink with five edges and point angle 90, to be clipped on drill bits, incl. allen key, without drill bit. Drilling and countersinking in one single operation. For clipping on drill bits with the appropriate . Very suitable for soft wood and veneered panels, for European hard wood only limited applicable, 2009, 210003000

GBP 14.99

1

FAMAG 10MM Classic Clip-on 5 Edge Countersink,

10mm Classic Clip-on 5 Edge Countersink, 2100100 ountersink with five edges and point angle 90, to be clipped on drill bits, incl. allen key, without drill bit. Drilling and countersinking in one single operation. For clipping on drill bits with the appropriate . Very suitable for soft wood and veneered panels, for European hard wood only limited applicable, 2100, 210010000

GBP 19.99

1

FAMAG 5MM Classic Clip-on 5 Edge Countersink

5mm Classic Clip-on 5 Edge Countersink, 2100055 ountersink with five edges and point angle 90, to be clipped on drill bits, incl. allen key, without drill bit. Drilling and countersinking in one single operation. For clipping on drill bits with the appropriate . Very suitable for soft wood and veneered panels, for European hard wood only limited applicable, 2100, 210005500

GBP 15.99

1

FAMAG 6mm Classic Clip-on 5 Edge Countersink

6mm Classic Clip-on 5 Edge Countersink, 2100060 ountersink with five edges and point angle 90, to be clipped on drill bits, incl. allen key, without drill bit. Drilling and countersinking in one single operation. For clipping on drill bits with the appropriate . Very suitable for soft wood and veneered panels, for European hard wood only limited applicable, 2100, 210006000

GBP 15.99

1

FAMAG 8mm Classic Clip-on 5 Edge Countersink

8mm Classic Clip-on 5 Edge Countersink, 2100080 ountersink with five edges and point angle 90, to be clipped on drill bits, incl. allen key, without drill bit. Drilling and countersinking in one single operation. For clipping on drill bits with the appropriate . Very suitable for soft wood and veneered panels, for European hard wood only limited applicable, 2100, 210008000

GBP 22.99

1

FAMAG 4MM Classic Clip-on 5 Edge Countersink

4mm Classic Clip-on 5 Edge Countersink, 2100045 ountersink with five edges and point angle 90, to be clipped on drill bits, incl. allen key, without drill bit. Drilling and countersinking in one single operation. For clipping on drill bits with the appropriate . Very suitable for soft wood and veneered panels, for European hard wood only limited applicable, 2100, 210004500

GBP 15.99

1

FAMAG 7mm Classic Clip-on 5 Edge Countersink

7mm Classic Clip-on 5 Edge Countersink, 2100070 ountersink with five edges and point angle 90, to be clipped on drill bits, incl. allen key, without drill bit. Drilling and countersinking in one single operation. For clipping on drill bits with the appropriate . Very suitable for soft wood and veneered panels, for European hard wood only limited applicable, 2100, 210007000

GBP 19.99

1

FAMAG 5mm Classic Clip-on 5 Edge Countersink

5mm Classic Clip-on 5 Edge Countersink, 2100050 ountersink with five edges and point angle 90, to be clipped on drill bits, incl. allen key, without drill bit. Drilling and countersinking in one single operation. For clipping on drill bits with the appropriate . Very suitable for soft wood and veneered panels, for European hard wood only limited applicable, 2100, 210005000

GBP 15.99

1

FAMAG 4mm HSS Clip-on 2 Edge Countersink, 2101040

4mm HSS Clip-on 2 Edge Countersink, 2101040 Countersink with two edges and point angle 90, to be clipped on drill bits. Drilling and countersinking in one single operation. For fitting on drill bits. Suitable for soft wood, European hard wood, veneered panels and plastics like acrylic glass, Corian, GFRP, HPL coating, polycarbonate, PVC and Trespa board, 2101, 210104000

GBP 66.99

1

FAMAG 4MM HSS Clip-on 2 Edge Countersink, 2101045

4mm HSS Clip-on 2 Edge Countersink, 2101045 Countersink with two edges and point angle 90, to be clipped on drill bits. Drilling and countersinking in one single operation. For fitting on drill bits. Suitable for soft wood, European hard wood, veneered panels and plastics like acrylic glass, Corian, GFRP, HPL coating, polycarbonate, PVC and Trespa board, 2101, 210104500

GBP 66.99

1

FAMAG 8mm HSS Clip-on 2 Edge Countersink, 2101080

8mm HSS Clip-on 2 Edge Countersink, 2101080 Countersink with two edges and point angle 90, to be clipped on drill bits. Drilling and countersinking in one single operation. For fitting on drill bits. Suitable for soft wood, European hard wood, veneered panels and plastics like acrylic glass, Corian, GFRP, HPL coating, polycarbonate, PVC and Trespa board, 2101, 210108000

GBP 64.99

1

FAMAG 6MM HSS Clip-on 2 Edge Countersink, 2101060

6mm HSS Clip-on 2 Edge Countersink, 2101060 Countersink with two edges and point angle 90, to be clipped on drill bits. Drilling and countersinking in one single operation. For fitting on drill bits. Suitable for soft wood, European hard wood, veneered panels and plastics like acrylic glass, Corian, GFRP, HPL coating, polycarbonate, PVC and Trespa board, 2101, 210106000

GBP 65.99

1

FAMAG 10mm HSS Clip-on 2 Edge Countersink, 2101100

10mm HSS Clip-on 2 Edge Countersink, 2101100 Countersink with two edges and point angle 90, to be clipped on drill bits. Drilling and countersinking in one single operation. For fitting on drill bits. Suitable for soft wood, European hard wood, veneered panels and plastics like acrylic glass, Corian, GFRP, HPL coating, polycarbonate, PVC and Trespa board, 2101, 210110000

GBP 66.99

1

FAMAG 3MM HSS Clip-on 2 Edge Countersink, 2101035

3mm HSS Clip-on 2 Edge Countersink, 2101035 Countersink with two edges and point angle 90, to be clipped on drill bits. Drilling and countersinking in one single operation. For fitting on drill bits. Suitable for soft wood, European hard wood, veneered panels and plastics like acrylic glass, Corian, GFRP, HPL coating, polycarbonate, PVC and Trespa board, 2101, 210103500

GBP 66.99

1

FAMAG 7MM HSS Clip-on 2 Edge Countersink, 2101070

7mm HSS Clip-on 2 Edge Countersink, 2101070 Countersink with two edges and point angle 90, to be clipped on drill bits. Drilling and countersinking in one single operation. For fitting on drill bits. Suitable for soft wood, European hard wood, veneered panels and plastics like acrylic glass, Corian, GFRP, HPL coating, polycarbonate, PVC and Trespa board, 2101, 210107000

GBP 62.99

1

FAMAG 5MM HSS Clip-on 2 Edge Countersink, 2101050

5mm HSS Clip-on 2 Edge Countersink, 2101050 Countersink with two edges and point angle 90, to be clipped on drill bits. Drilling and countersinking in one single operation. For fitting on drill bits. Suitable for soft wood, European hard wood, veneered panels and plastics like acrylic glass, Corian, GFRP, HPL coating, polycarbonate, PVC and Trespa board, 2101, 210105000

GBP 66.99

1

FAMAG 30MM HSS Clip-on Straight Edge Countersink Drill Size 10MM, 2106310

30mm HSS Clip-on Striaght Edge Countersink Drill Size 10mm, 2106310 Countersink for straight countersinking with two main cutting edges and two taper taps; to be clipped on drill bits. Drilling and countersinking in one single operation. For fitting on drill bits. Suitable for soft wood, European hard wood, veneered panels and plastics like acrylic glass, Corian, GFRP, HPL coating, polycarbonate, PVC and Trespa board, 2106, 210631000

GBP 119.99

1

FAMAG 20mm HSS Clip-on Straight Edge Countersink Drill Size 8mm, 2106180

20mm HSS Clip-on Striaght Edge Countersink Drill Size 8mm, 2106180 Countersink for straight countersinking with two main cutting edges and two taper taps; to be clipped on drill bits. Drilling and countersinking in one single operation. For fitting on drill bits. Suitable for soft wood, European hard wood, veneered panels and plastics like acrylic glass, Corian, GFRP, HPL coating, polycarbonate, PVC and Trespa board, 2106, 210618000

GBP 59.99

1

FAMAG 25MM HSS Clip-on Straight Edge Countersink Drill Size 10MM, 2106210

25mm HSS Clip-on Striaght Edge Countersink Drill Size 10mm, 2106210 Countersink for straight countersinking with two main cutting edges and two taper taps; to be clipped on drill bits. Drilling and countersinking in one single operation. For fitting on drill bits. Suitable for soft wood, European hard wood, veneered panels and plastics like acrylic glass, Corian, GFRP, HPL coating, polycarbonate, PVC and Trespa board, 2106, 210621000

GBP 79.99

1

FAMAG 20MM HSS Clip-on Straight Edge Countersink Drill Size 10MM, 2106110

20mm HSS Clip-on Striaght Edge Countersink Drill Size 10mm, 2106110 Countersink for straight countersinking with two main cutting edges and two taper taps; to be clipped on drill bits. Drilling and countersinking in one single operation. For fitting on drill bits. Suitable for soft wood, European hard wood, veneered panels and plastics like acrylic glass, Corian, GFRP, HPL coating, polycarbonate, PVC and Trespa board, 2106, 210611000

GBP 69.99

1

FAMAG 25mm HSS Clip-on Straight Edge Countersink Drill Size 12mm, F2106212

25mm HSS Clip-on Striaght Edge Countersink Drill Size 12mm, F2106212 Countersink for straight countersinking with two main cutting edges and two taper taps; to be clipped on drill bits. Drilling and countersinking in one single operation. For fitting on drill bits. Suitable for soft wood, European hard wood, veneered panels and plastics like acrylic glass, Corian, GFRP, HPL coating, polycarbonate, PVC and Trespa board, 2106, 210621200

GBP 99.99

1

FAMAG 30mm HSS Clip-on Straight Edge Countersink Drill Size 12mm, 2106312

30mm HSS Clip-on Striaght Edge Countersink Drill Size 12mm, 2106312 Countersink for straight countersinking with two main cutting edges and two taper taps; to be clipped on drill bits. Drilling and countersinking in one single operation. For fitting on drill bits. Suitable for soft wood, European hard wood, veneered panels and plastics like acrylic glass, Corian, GFRP, HPL coating, polycarbonate, PVC and Trespa board, 2106, 210631200

GBP 119.99

1

Awardvindende Google Marketing Powerhouse

Brand

Size

Merchant

Price (EUR)

FAMAG 3mm HSS Clip-on 2 Edge Countersink

FAMAG 6MM Classic Clip-on 5 Edge Countersink

FAMAG 3mm Classic Clip-on 5 Edge Countersink

FAMAG 3mm Classic Clip-on 5 Edge Countersink

FAMAG 10MM Classic Clip-on 5 Edge Countersink,

FAMAG 5MM Classic Clip-on 5 Edge Countersink

FAMAG 6mm Classic Clip-on 5 Edge Countersink

FAMAG 8mm Classic Clip-on 5 Edge Countersink

FAMAG 4MM Classic Clip-on 5 Edge Countersink

FAMAG 7mm Classic Clip-on 5 Edge Countersink

FAMAG 5mm Classic Clip-on 5 Edge Countersink

FAMAG 4mm HSS Clip-on 2 Edge Countersink, 2101040

FAMAG 4MM HSS Clip-on 2 Edge Countersink, 2101045

FAMAG 8mm HSS Clip-on 2 Edge Countersink, 2101080

FAMAG 6MM HSS Clip-on 2 Edge Countersink, 2101060

FAMAG 10mm HSS Clip-on 2 Edge Countersink, 2101100

FAMAG 3MM HSS Clip-on 2 Edge Countersink, 2101035

FAMAG 7MM HSS Clip-on 2 Edge Countersink, 2101070

FAMAG 5MM HSS Clip-on 2 Edge Countersink, 2101050

FAMAG 30MM HSS Clip-on Straight Edge Countersink Drill Size 10MM, 2106310

FAMAG 20mm HSS Clip-on Straight Edge Countersink Drill Size 8mm, 2106180

FAMAG 25MM HSS Clip-on Straight Edge Countersink Drill Size 10MM, 2106210

FAMAG 20MM HSS Clip-on Straight Edge Countersink Drill Size 10MM, 2106110

FAMAG 25mm HSS Clip-on Straight Edge Countersink Drill Size 12mm, F2106212

FAMAG 30mm HSS Clip-on Straight Edge Countersink Drill Size 12mm, 2106312

Powered by Cobiro