442 results (0,14444 seconds)

Show all filters

Brand

Merchant

Price (EUR)

Show all

Reset filter

Products
From
Shops

Fireclass FC460PH Combined Optical and Heat Detector

Fireclass FC460PH Combined Optical and Heat Detector

Fireclass FC460PH Combined Optical and Heat DetectorThe FC460 range of detectors uses the FireClass digital protocol to provide robust and reliable communications to the control panel. A wide range of cable types can be used and the open topology capability of the system makes it ideal for the upgrade of older systems whilst reusing the cables to reduce cost. With its ability to detect a wide range of fires from flaming to smoldering types the combined optical and heat multi-sensor detector is the preferred choice for a range of applications including light industrial retail and office environments. It operates in a number of approved modes and sensitivities that can be dynamically selected to suit different environmental conditions.Key FeaturesUp to 250 detectors per loopProtective optical chamber screenRobust coated electronicsExtended service lifeFire isolate and fault LED indications

GBP 34.85
1

Fireclass 516.016.029FC Digital One or Two Zone LHD EOL Box

Fireclass 516.016.029FC Digital One or Two Zone LHD EOL Box

Fireclass 516.016.029FC Digital One or Two Zone LHD EOL BoxThe 516.016.029FC is a ProReact Digital One or Two Zone LHD EOL Box. It is designed to effectively terminate up-to two zones of ProReact EN Digital LHD cable in a secure weatherproof enclosure.Furthermore the built-in switches for testing a fault and alarm condition allow the integrity of the whole system to be functionally checked in situ providing comprehensive testing and maintenance of the system.Key FeaturesWeatherproof enclosureBuilt-in switches

GBP 122.65
1

Fireclass 516.016.028FC LHD Junction EOL Box

Fireclass 516.016.028FC LHD Junction EOL Box

Fireclass 516.016.028FC LHD Junction EOL BoxThe ProReact Digital End-of-Line Unit is designed to effectively terminate up-to two zones of ProReact EN Digital LHD cable in a secure weatherproof enclosure.Furthermore the built-in switches for testing a fault and alarm condition allow the integrity of the whole system to be functionally checked in situ providing comprehensive testing and maintenance of the system.Typical ApplicationsCar parksOil and gas tank farmsMinesCable traysCold storageConveyor beltsKey FeaturesWeatherproof enclosureBuilt-in switchesThe first digital linear heat detection system to be certified to EN54-282016Improved testing and maintenance functionalityManufactured in the UK

GBP 73.60
1

Fireclass 590.000.002FC NEO4250E Extension Controller amp 4 Channels Up To 1000W

Fireclass 590.000.002FC NEO4250E Extension Controller amp 4 Channels Up To 1000W

Fireclass 590.000.002FC NEO4250E Extension Controller 4 Channels Up To 1000WLDA NEO Extension 4250 is an extension controller and a4x250W amplifier or 2x500W amplifier for the compact EN 54-16 PAVA system NEO.This extension unit can scale the NEO system with 4 morezones as it includes 4 class D power amplifier channels at 100V or 70V lines.Audio is transmitted from the main unit to this extensionunit via a daisy-chain connection via FlexNet. Therefore it guarantees maximumquality and integrity.The extension is fully configurable with the NEOConfigurator software included with NEO. It is possible to configure remotelythe unit as part of the whole NEO system and create events to perform actionsin the system triggered by conditions of input level datetime UDPcommand a GPIO or a button from the MPS microphone.Key Features4 class D amplifiers of 250W or 2 amplifiers of 500W for100V70V lines.4 pre-amp outputs for external PA amplifiers connection.DSP 7-band inputoutput Parametric Equalizer loudness LDAsound enhancer independent volume control per each output channel and audiofilters.Triple Ethernet port for Digital Audio Cobranet remotecontrol and supervision and for escalating the system with NEO-Extensions indaisy-chain mode with Flexnet techlogy up to 1024 zones.Control for up to 16 attenuators LDA AT6.6 supervised contact relays for integration withFire Alarm Control Panel.

GBP 2684.29
1

Fireclass 2501012FC Conventional Indoor Call Point

Fireclass 2501012FC Conventional Indoor Call Point

Fireclass 2501012FC Conventional Indoor Call PointA comprehensive range of callpoints for use with FireClass conventional systems. All the callpoints are designed to enable an alarm signal to be given by breaking a glass element with the option of a resettable deformable element. If required an optional transparent hinged cover may be installed to guard against accidental operation.Key FeaturesDistinctive and recognisable stylingSurface or Flush MountingTest key facility speeds maintenance visitsOptional transparent hinged coverOptional Plastic Deformable Call Point Element for food processing areasIP67 Waterproof models for external application

GBP 11.27
1

Fireclass 590.000.004FC NEO8250E Extension Controller amp 8 Channels Up To 8000W

Fireclass 590.000.004FC NEO8250E Extension Controller amp 8 Channels Up To 8000W

Fireclass 590.000.004FC NEO8250E Extension Controller 8 Channels Up To 8000WLDA NEO Extension 8250 is an extension unit for the EN 54-16PAVA system NEO. This extension unit scales the NEO system with 8 more zonesas it includes 8 class D power amplifier channels of 250W at 100V or 70V.Audio is transmitted from the main unit to this extensionunit via a daisy-chain connection by Flexnet and using audio over Ethernet.Therefore it guarantees maximum audio quality and integrity in the signal.The NEO Extension is fully configurable with theNEO-Configurator software included with NEO. It is possible to configureremotely the unit as part of the whole NEO system and create events to performactions in the system triggered by conditions of input level datetimeUDP command a GPIO or button from MPS microphone.Key Features8 class D amplifiers of 250W for 70 or 100V lines8 pre-amp outputs for external PA amplifiers connection.DSP 7-band inputoutput Parametric Equalizer loudness LDAsound enhancer independent volume control per each output channel and audiofilters.Triple Ethernet port for Digital Audio Cobranet remotecontrol and supervision and for escalating the system with NEO-Extensions inredundant daisy-chain mode with Flexnet technology up to 1024 zones.Control for up to 32 attenuators LDA AT6.Integrated frontal loudspeaker for monitoring.12 supervised contact relays for integrationwith Fire Alarm Control Panel.

GBP 4495.06
1

Fireclass 2501013FC Conventional Manual Call Point with Glass Element with Back Box

Fireclass 2501013FC Conventional Manual Call Point with Glass Element with Back Box

Fireclass 2501013FC Conventional Manual Call Point with Glass Element with Back BoxThe 2501013FC is a conventional manual alarm call point with integral alarm LED and activation resistor. Operation is by break glass. This call point is semi flush mounted or can be surface mounted using back box and comes complete with a test key.Fireclass have a comprehensive range of callpoints for use with conventional systems. All the callpoints are designed to enable an alarm signal to be given by breaking a glass element with the option of a resettable deformable element. If required an optional transparent hinged cover may be installed to guard against accidental operation.Key FeaturesDistinctive and recognisable stylingSurface or Flush MountingTest key facility speeds maintenance visits

GBP 13.32
1

Fireclass FC501-HK Triple Circuit Single Loop Panel with Icons and 2.5A PSU

Fireclass FC501-HK Triple Circuit Single Loop Panel with Icons and 2.5A PSU

Fireclass FC501-HK Triple Circuit Single Loop Panel with Icons and 2.5A PSUFC501 is the newest FireClass addressable solution for small systems brought to you by Tyco Fire Protection Products. Conceived to be extremely easy to install and use the FC501 is an out of the box panel which offers the simplicity of a conventional system and the benefits of the FireClass addressable digital technology.Auto Addressing Intelli-Zone On line Help function USB interface to upload the configuration and the easiness to configure the panel via integrated keypad are only some of the features that allow the installation and configuration of the FC501 in just a few simple steps.This 3 in 1 loop panel enables 3 circuits of devices to be connected to this single loop panel providing greater flexibility and simplifying the wiring process. Once the loop devices are wired the system can be auto addressed by a single click. The devices are automatically assigned to 3 zones according to the physical loop they are connected to the system is ready to protect the site. If the system configuration needs to be modified and the devices re-addressed or the zonesre-programmed the powerful Intelli-Zone feature significantly reduces the configuration time allowing the installer to perform test and programming at once. The configuration software is extraordinarily user friendly and provides a very nice graphic interface that displays all devices connected to the different zones. A battery and wire calculation tool is included in the software to help the installer in sizing up the system.A free graphic maps software based on a multilevel maps tree structure allows a remote real time visualization of any loop zone and point status and the simple remote user interface with control buttons reset silence evacuate allow users to manage the system from any location in the world. The FireClass FC501 control panel supports a total of 128 devices including the double and triple technology detectors and a plenty of modules and sounders benefiting of one of the widest ranges available in the market.Key Features3 in 1 LoopsUp to 400mA current dynamically shared across 3 loop circuitsTwo versions available 1.5 A or 2.5 A power supplyUp to 128 Addresses 32 ZonesEasy to programmeAuto AddressingAuto mapping with Intelli-Zone featureOut of the BoxOn Line Help functionUSB interface dual role HostDeviceMulti UsersMulti Installers Up to 2 Installers 8 UsersWalk test function4000 Event LogLoop break locationOn board PSTN communicatorOptional IP boardGSMGPRS as external moduleLCD display 160 CharactersUp to 4 repeatersUp to 4 Multifunction interfaces for printer simplified fire brigade panelsEvent transmission via PSTN and IPFront panel controls enabling text and configuration changesDisplays temperature CO level and smoke level at any pointAutomatic drift compensation

GBP 531.17
1

Fireclass 508.033.751FC Prescient III Extinguishing Control Panel

Fireclass 508.033.751FC Prescient III Extinguishing Control Panel

Fireclass 508.033.751FC Prescient III Extinguishing Control PanelThe Prescient III gaseous extinguishant control panel is powerful yet user-friendly and is designed and manufactured to a high standard. The panel features approval to BSEN 12094-12003 BSEN 54-2 and 4 and is designed to BS7273 part 1.The panel has extensive configuration options but is easy to install programme and operate. The removable chassis enables the engineer to first fix an empty cabinet and then fit the chassis at the commissioning stage. This is supported by comprehensive documentation on commissioning operating maintenance and fault finding. In addition there is a comprehensive range of compatible accessories available to meet most customer requirements.Key FeaturesComprehensive facilities for gaseous extinguishing systemsApproval to BSEN 12094-12003 additional optionsApproval to BSEN 54-2 and 4Designed to BS7273-12000Monitored inputs for gas discharged gas low isolation valve closedabnormal gas trapped in manifoldControl inputs for automanual gas hold gas abort1 minute actuator cut off optionMonitored actuatorsolenoid releaseExtensive disablement optionsCommon fire fault relay monitored output facilities1st stage 2nd stage 3rd stage and gas discharged relay monitored output facilitiesReset relay facilitiesIntrinsically safe barrier settingsMetron or solenoid compatibleSingle or double knock operationPre-discharge delay adjustable from 0 to 60 secondsDischarged indication with or without pressure switchInhibit silence alarms until gas dischargedLatching or non latching fault indication optionOption for rapid buzzer pulse when gas imminentSemi-flush bezel and fully-flush cabinet options availableOne man zone and sounder testEasily removable chassis

GBP 671.05
1

Fireclass 590.000.001FC NEO8060 Public Address and Voice Alarm System

Fireclass 590.000.001FC NEO8060 Public Address and Voice Alarm System

Fireclass 590.000.001FC NEO8060 Public Address and VoiceAlarm SystemLDA NEO 8060 is a compact EN 5416 certified PAVA systemthat ensures a ensures a fast safe and controlled emergency evacuation.NEO represents a costeffective voice evacuation and publicaddress system due to its cuttingedge features excellent audio quality andflexibility in just 2U 8 class D amplifiers 5 audio inputs 7x8 audio matrix39x1024 digital touch screen Cobranet audio etc.With the NEO Configurator software included it ispossible to configure the equipment remotely and create actions in the system triggered by conditions of input level datetime UDPcommand a GPIO or button from MPS microphone.Key FeaturesEN 5416 and EN60849 certified.Detection and indication of failure in all emergencyfunctions.Integration with fire alarm control panels.Prerecorded evacuation messages.Phased evacuation.Manual control of emergency states with access control.Recording output in emergency state.Emergency log.Loudspeaker line supervision.AB connection 16 lines.Back up amplifier connection 71 120 W channels or 41250 W channels.Rear viewFive audio inputs.Eight class D amplifiers with two configurations for 100V70V lines 8 class D amplifiers of 120 W per channel or 4 class D amplifiers of250 W per channel.Audio Matrix 7x8 digital up to 39x2014.Eight preamp outputs for external PA amplifiers connection.Up to eight multizone microphones MPS8Z or VAP1 panelsconnected with CAT5 UTP cable.DSP 7band inputoutput parametric equalizer loudness soundenhancer independent volume control per each I0 channel and audio filters.Triple Ethernet port for Digital Audio Cobranet remotecontrol and supervision and for escalating the system with NEO Extensions indaisychain mode with Flexnet technology up to 1024 zones.43 frontal touch screen with access control.4 GB of internal memory for prerecorded messages.Integrated emergency microphone.Control for up to 32 attenuators AT6.Integrated frontal loudspeaker for monitoring.22 GPIO ports eight supervised for integrationwith fire alarm control panel.

GBP 5254.66
1

Fireclass 590.000.003FC NEO4500E Extension Controller amp 4 Channels Up To 2000W

Fireclass 590.000.003FC NEO4500E Extension Controller amp 4 Channels Up To 2000W

Fireclass 590.000.003FC NEO4500E Extension Controller 4 Channels Up To 2000WLDA NEO Extension 4500 is an extension controller and a4x500W amplifier or 2x1000W amplifier for the compact EN 54-16 PAVA systemNEO.This extension unit can scale the NEO system with 4 morezones as it includes 4 class D power amplifier channels at 100V or 70V lines.Audio is transmited from the main unit to this extensionunit via daisy-chain connection via FlexNet. Therefore it guarantees maximumquality and integrity.The extension is fully configurable with theNEO-Configurator software included with NEO. It is possible to configureremotely the unit as part of th whole NEO system and create events to performactions in the system triggered by conditions of input level datetimeUDP command a GPIO or button from MPS microphone.Key Features 4 class D amplifiers of 500W or 2 amplifiers of 1000W for100V70V lines.4 pre-amp outputs for external PA amplifiers connection.DSP 7-band inputoutput Parametric Equalizer loudness LDAsound enhancer independent volume control per each output channel and audiofilters.Triple Ethernet port for Digital Audio Cobranet remotecontrol and supervision and for escalating the system with NEO-Extensions indaisy-chain mode with Flexnet techlogy up to 1024 zones.Control for up to 16 attenuators LDA AT6.6 supervised contact relays for integration withFire Alarm Control Panel.

GBP 3573.41
1

FireClass FC460PC Multi-Sensor Smoke Heat and Carbon Monoxide Detector

FireClass FC460PC Multi-Sensor Smoke Heat and Carbon Monoxide Detector

FireClass FC460PC Multi-Sensor Smoke Heat and Carbon Monoxide DetectorThe FC460 range of detectors uses the Fireclass digital protocol to provide robust and reliable communications to the control panel. A wide range of cable types can be used and the open topology capability of the system makes it ideal for the upgrade of older systems whilst reusing the cables to reduce cost. For life protection and when the environmental conditions are challenging the multi-sensor smoke heat and CO detector provides the ultimate in detector performance. It uses the three sensor elements in concert to accurately determine the presence of fire with false alarm rejection properties that make it the ideal choice for hotel bedrooms where steam from bathrooms is a common source of false alarms.Key FeaturesMultiple fire detection modesFireClass digital detection algorithmsCO fire detection technologyUp to 250 detectors per loop dependant on panel choiceOptional bi-directional line isolationRemote detector verification temperature read outHighly featured service toolProgrammable alarm LED with 360o viewing angleFire isolated and fault LED indicationOptional detector locking pinVariety of sounder basesProtected optical chamber screenRobust coated electronicsExtended Service LifeEN54 and CPD approved

GBP 60.91
1

Fireclass 516.800.931FC Address Flag Labels Loop A White

Fireclass 516.800.931FC Address Flag Labels Loop A White

Fireclass 516.800.931FC Address Flag Labels Loop A WhiteThe 516.800.931FC is a sheet of Address Flag Labels Loop A in the colour white. Labels are provided on sheets of 250 in eight different colours to enable quick identification between different loops.The FC800 Series detectors incorporate a feature which automatically transfers the address flag to the detector base when the detector is plugged into the base. On removal of the detector the address flag remains on the ceiling thus ensuring that detectors are not accidentally returned to the wrong detector base following service routines.Most of the detection panels incorporate additional fail-safe software features to ensure that incorrect detector positioning does not compromise the system.Key Features250 labels providedProvides clear identification of addressColour codedFlag remains on base

GBP 1.84
1

Fireclass 2501234FC Conventional Manual Call Point with Plastic Element with Back Box

Fireclass 2501234FC Conventional Manual Call Point with Plastic Element with Back Box

Fireclass 2501234FC Conventional Manual Call Point with Plastic Element with Back BoxA conventional manual alarm call point with integral alarm LED and activation resistor. Operation is by resettable deformable element.This call point is semi flush mounted or can be surface mounted using back box and comes complete with a test key.Fireclass has comprehensive range of callpoints for use with conventional systems.Key FeaturesDistinctive and recognisable stylingSurface or Flush MountingTest key facility speeds maintenance visits

GBP 13.97
1

Fireclass FC490ST Handheld Service and Programming Tool

Fireclass FC490ST Handheld Service and Programming Tool

FC490ST Fireclass Handheld Service and Programming ToolThe FC490ST service tool used to address field devices from the Fireclass range.Key FeaturesReadWrite the detectorancillary addressDisplay temperatureCO levels and smoke obscurationProgramming of the LEDTesting the detector remote LED and control outputsPerform the detector self verification test functionDisplay detector contamination levelControlling ancillary outputsReading ancillary statusPower management options

GBP 305.51
1

Fireclass 557.202.612FC PMM840 - 40 V PSU - 40V Regulated Loop Supply Loop 3 and 4 Expansion

Fireclass 557.202.612FC PMM840 - 40 V PSU - 40V Regulated Loop Supply Loop 3 and 4 Expansion

Fireclass 557.202.612FC PMM840 - 40 V PSU - 40V Regulated Loop Supply Loop 3 and 4 ExpansionThe PMM840 board provides extra loop power to an XLM800 loop expansion board fitted in a Fireclass fire alarm control panel. It takes an unused 24 V feed from the existing power supply and converts this to 40 V for powering the loop. The PMM840 can provide up to 1.2 A at 40 V.The PMM840 stacks on top of an existing PMM800 board. The PMM840 is based on the PMM800 board but with fewer components.Key Features40V Regulated Loop SupplyLoop 3 and 4 Expansion

GBP 108.46
1

Fireclass 516.016.036FC Digital LHD 88C PVC - 100m

Fireclass 516.016.036FC Digital LHD 88C PVC - 100m

Fireclass 516.016.036FC Digital LHD 88C PVC - 100mFireclass ProReact Digital LHD cable has been designed to provide users with fire detection at the point of risk. Every inch of the ProReact Digital LHD cable acts as a detector providing extensive and comprehensive detection over large areas.ProReact Digital LHD cable triggers a response when a specific activation temperature is reached.The extensive range of coatings and detection temperatures provides users with a suitable method of fire detection for a wide range of applications.Typical applications for LHD cable include cable trays tunnels flammable liquid storage tanks mines cold storage escalators car parks warehouses.Key Features100mTriggers a response when activation temperature is reachedBroad ambient operating temperature rangeUL FM CE and RoHS approvedMaterial PVCTemperature 88CComprehensive range of coatings and optional stainless steel outer braid for additional protection

GBP 239.76
1

Fireclass 516.016.042FC Digital LHD 68C Nylon Outer Sheath - 100m

Fireclass 516.016.042FC Digital LHD 68C Nylon Outer Sheath - 100m

Fireclass 516.016.042FC Digital LHD 68C Nylon Outer Sheath - 100mFireclass ProReact Digital LHD cable has been designed to provide users with fire detection at the point of risk. Every inch of the ProReact Digital LHD cable acts as a detector providing extensive and comprehensive detection over large areas.ProReact Digital LHD cable triggers a response when a specific activation temperature is reached.The extensive range of coatings and detection temperatures provides users with a suitable method of fire detection for a wide range of applications.Typical applications for LHD cable include cable trays tunnels flammable liquid storage tanks mines cold storage escalators car parks warehouses.Key Features100mTriggers a response when activation temperature is reachedBroad ambient operating temperature rangeUL FM CE and RoHS approvedMaterial Nylon Outer SheathTemperature 68CComprehensive range of coatings and optional stainless steel outer braid for additional protection

GBP 281.88
1

Fireclass 516.016.034FC Digital LHD 78C PVC - 200m

Fireclass 516.016.034FC Digital LHD 78C PVC - 200m

Fireclass 516.016.034FC Digital LHD 78C PVC - 200mFireclass ProReact Digital LHD cable has been designed to provide users with fire detection at the point of risk. Every inch of the ProReact Digital LHD cable acts as a detector providing extensive and comprehensive detection over large areas.ProReact Digital LHD cable triggers a response when a specific activation temperature is reached.The extensive range of coatings and detection temperatures provides users with a suitable method of fire detection for a wide range of applications.Typical applications for LHD cable include cable trays tunnels flammable liquid storage tanks mines cold storage escalators car parks warehouses.Key Features200mTriggers a response when activation temperature is reachedBroad ambient operating temperature rangeUL FM CE and RoHS approvedMaterial PVCTemperature 78CComprehensive range of coatings and optional stainless steel outer braid for additional protection

GBP 479.52
1