32 results (0,16149 seconds)

Show all filters

Brand

Merchant

Price (EUR)

Show all

Reset filter

Products
From
Shops

Fireclass BXM2425U Microprocessor Controlled Power Station

Fireclass BXM2425U Microprocessor Controlled Power Station

Fireclass BXM2425U Microprocessor Controlled Power StationThe BXM2425-U and 50-U are approved by IMQ to EN 54-41997 A12002 and EN60950-12001. The steel housing contains a 2.5 amp or 5 amp switch mode power supply and monitoring board and has space to accommodate 2 x 12V 17Ah sealed lead acid batteries. The 10 front panel LEDs comprehensively indicate the status of the unit.Key FeaturesRobust metal housing.Twin fused outputs.Temperature compensated charging.Deep discharge protection of batteries.Fault relay output.Size 383mm wide x 408mm high x 97mm deep.Weight 4.3 Kg excluding batteries.Supply voltage 230VAC 5060Hz.Comprehensive LED status indication.

GBP 191.20
1

Fireclass BXM2450U Microprocessor Controlled Power Station

Fireclass BXM2450U Microprocessor Controlled Power Station

Fireclass BXM2450U Microprocessor Controlled Power StationThe BXM2425-U and 50-U are approved by IMQ to EN 54-41997 A12002 and EN60950-12001. The steel housing contains a 2.5 amp or 5 amp switch mode power supply and monitoring board and has space to accommodate 2 x 12V 17Ah sealed lead acid batteries. The 10 front panel LEDs comprehensively indicate the status of the unit.Key FeaturesRobust metal housing.Twin fused outputs.Temperature compensated charging.Deep discharge protection of batteries.Fault relay output.Size 383mm wide x 408mm high x 97mm deep.Weight 4.3 Kg excluding batteries.Supply voltage 230VAC 5060Hz.Comprehensive LED status indication.

GBP 207.49
1

Fireclass 508.031.746FC BXM2425-B Microprocessor Controlled Power Station

Fireclass 508.031.746FC BXM2425-B Microprocessor Controlled Power Station

Fireclass 508.031.746FC BXM2425-B Microprocessor Controlled Power StationThe BXM2425-U is approved by IMQ to EN 54-41997 A12002 and EN60950-12001. The steel housing contains a 2.5 amp switch mode power supply and monitoring board and has space to accommodate 2 x 12V 17Ah sealed lead acid batteries. The 10 front panel LEDs comprehensively indicate the status of the unit.Key FeaturesRobust metal housingTwin fused outputsTemperature compensated chargingDeep discharge protection of batteriesFault relay outputSize 383mm wide x 408mm high x 97mm deepWeight 4.3 Kg excluding batteriesSupply voltage 230VAC 5060HzComprehensive LED status indicationMax. 25A 276VDCRS485 Bus interface for J408-8 and J424-8 panels

GBP 198.77
1

Fireclass 508.031.747FC BXM2450-B Microprocessor Controlled Power Station

Fireclass 508.031.747FC BXM2450-B Microprocessor Controlled Power Station

Fireclass 508.031.747FC BXM2450-B Microprocessor Controlled Power StationThe BXM2450-B is approved by IMQ to EN 54-41997 A12002 and EN60950-12001. The steel housing contains 5 amp switch mode power supply and monitoring board and has space to accommodate 2 x 12V 17Ah sealed lead acid batteries. The 10 front panel LEDs comprehensively indicate the status of the unit.Key FeaturesRobust metal housingTwin fused outputsTemperature compensated chargingDeep discharge protection of batteriesFault relay outputSize 383mm wide x 408mm high x 97mm deepWeight 4.3 Kg excluding batteriesSupply voltage 230VAC 5060HzComprehensive LED status indicationMax. 5A 276VDCRS485 Bus interface for J408-8 and J424-8 panels

GBP 224.98
1

Fireclass 1500080FC Key Switch Cylinder NS106-1

Fireclass 1500080FC Key Switch Cylinder NS106-1

Fireclass 1500080FC Key Switch Cylinder NS106-1The 1500080FC from Fireclass is a NS106-1 Key Switch Cylinder. This 2-position SPST Keylock Switch features chrome-plated zinc alloy die-cast housing and a plastic cover. It also has silver-plated contacts and terminals.Key FeaturesZinc alloy keys chrome plated with plastic coverSilver plated contacts and terminals4 pins tumbler mechanism10mR Maximum contact resistance200MR Insulation resistance 500VDC1000VAC at 1 minute Dielectric strength

GBP 7.33
1

HVR800 Fireclass High Voltage Relay Interface

HVR800 Fireclass High Voltage Relay Interface

HVR800 Fireclass High Voltage Relay InterfaceThe HVR800 High Voltage Relay Interface is a non-addressable multi-voltage relay module operating from 24V dc 24V ac 120V ac and 240V ac. The encapsulated HVR800 provides a 10 amp volt-free contact that can be used to extend the contact ratings of FC410RIM Addressable Relay Module applications.A maximum of four HVR800s can be individually driven and controlled by an FC410MIO Small Addressable Multi-InputOutput module if all HVR800s are powered by 120V ac or 240V ac. For ac operation no external dc power supply unit is required to operate the relay. When used to switch 24V dc the HVR800 must be provided with an external 24V dc supply which should be switched through the clean relay contacts of an FC410MIO or FC410RIM.Key Features- 5 A 240 VacDimensions WxHxD 42x26.5x74 mmOperating Temperature -25 to 70 CStorage Temperature -45 to 80 CRelative Humidity 95 non condensing

GBP 53.16
1

Fireclass 568.800.034FC HVR800 High Voltage Relay Module In D800 Housing

Fireclass 568.800.034FC HVR800 High Voltage Relay Module In D800 Housing

Fireclass 568.800.034FC HVR800 High Voltage Relay Module In D800 HousingThe HVR800 is a non-addressable device designed to allow a low current main rated relay to switch up to 10A. Alternatively a low voltage drive signal such as that provided by the RIM800 or 80 way mimic can be used to switch the integral mains relay.Key FeaturesD800 housing- 5 A 240 VacDimensions WxHxD 42x26.5x74 mmOperating Temperature -25 to 70 CStorage Temperature -45 to 80 CRelative Humidity 95 non-condensing

GBP 90.48
1

Fireclass Prescient 3 Status Lamp Unit SLU 3

Fireclass Prescient 3 Status Lamp Unit SLU 3

Fireclass Prescient 3 Status Lamp Unit SLU 3The FireClass Prescient 3 SLU 3 Status Lamp Unit is a versatile status indication and control module designed for seamless integration with fire alarm and suppression systems. It provides clear event indication manual release functionality and advanced control features such as an Abort switch Timer Hold and an AutoManual Keyswitch ensuring maximum flexibility and safety in fire protection scenarios.Ideal for fire suppression and alarm systems the SLU 3 ensures precise monitoring and intervention making it a critical component for high-risk environments requiring rapid response and advanced control options.Key FeaturesTwo core data link between panel and status unitTwo core power connection between panel and status unitIndication of eventsstatusManual ReleaseAutoManual KeyswitchCountdown timerAbort and hold off switch

GBP 476.34
1

Fireclass 517.001.304FC MTL5525 IS Sounder Driver

Fireclass 517.001.304FC MTL5525 IS Sounder Driver

Fireclass 517.001.304FC MTL5525 IS Sounder DriverThe MTL5525 Isolating Sounder Driver enables an intrinsically safe sounder located in the hazardous area to be controlled from the safe area.The barrier is designed as a CE marked replacement for the existing MTL3021 barrier. It has one channel and is suitable for connecting loads in Zone 0 IIC T4-T6 hazardous areas if suitably certified. It enables an onoff device in a hazardous area to be controlled by a volt-free contact or logic signal in the safe area. It can drive loads such as solenoids alarms LEDs and other low power devices that are certified as intrinsically safe or are classified as nonenergy storing simple apparatus.MTL5500 Series isolating IS interface units offer a compact and easy-to-use means for communicating safely with process measuring indicating actuating and local control equipment in hazardous areas. The range of models handle analogue and binary signals in both directions amplifying or otherwise conditioning them as required and at the same time providing certified explosion protection for equipment and wiring in all zones and all explosive atmospheres. The range has been designed for reliability. It builds on the proven success of the MTL2000 3000 4000 and 5000 Series to bring the benefits of new developments in galvanic isolation without compromising the reliability of the designs from which it has evolved. It is designed from the outset to meet all relevant European Directives. Uniform appearance and connectability of the units and a comprehensive range of accessories and enclosures make planning a pleasure for the user.Key FeaturesInput Type VoltageOutput Type VoltageSignal Conditioner Type IsolationInput Range 1.4 - 4.5 V dcOutput Range 7.8 - 24 VMounting Type DIN RailMinimum Operating Temperature -20CMaximum Operating Temperature 60CNumber of Channels 1Module Type SolenoidAlarm DriverTermination CableOperating Temperature Range -20 - 60 CSeries MTL5000

GBP 213.74
1

Fireclass DB3B Flameproof Horn Sounder - High Power

Fireclass DB3B Flameproof Horn Sounder - High Power

Fireclass DB3BDGD048N2BNRFC DB3B Flameproof Horn Sounder High Power Explosion Proof 122dB 1mThe DB3B is a high-power explosion proof sounder introduced as a replacement for the current DB3 with improved functionality and performance.Certified for use in a wide range of temperatures from -55C to 70C the Ex enclosure is manufactured from GRP with a rugged thermoplastic flare providing a corrosion free and aesthetically pleasing product.Capable of producing 122dB 1m and with a range of pre-recorded tones the DB3B includes an integral volume control which is ideal when a lower output is required.The unit is provided with versatile control options allowing compatibility with a wide range of control methods and PLCs.The standard DC unit provides 3 tone stages each stage has 28 tones available which can be independently selected. The unit can be controlled by reversing the polarity of the power supply 2 stage or providing a common negative and switching between multiple positive supplies. The DB3B proves its versatility by additionally being able to work with a common positive supply and switching the negatives. The tone stages of the DB3B can also be controlled via voltage free contacts provided by a control panel.Key FeaturesEx d Ex de IICIIIC T4T5T6ATEX certifiedIECEx certifiedUL certified for USA and Canada Class I Div 2 Groups A-D Class I Zone 1 Ex d IICAEx d IIC Gb Class II Div 2 Groups F G Zone 21 AEx tb IIIC Class III Div. 1TR CU certifiedCQST certifiedCCOE certifiedChinese Compulsory Certification for Fire systems CCCF certifiedINMETRO certifiedSIL 1 certifiedCSFM certifiedUp to 122dB output 1mIntegral volume control28 tones user selectable3 stage unit remotely switchableTones can be programmed to customers specificationDC supply voltage between 12V and 48VEx enclosure - glass reinforced polyesterFlare - high impact thermoplastic polyester

GBP 896.45
1

Fireclass 514.800.805FC FC420CP-I Indoor Call Point with Isolator

Fireclass 514.800.805FC FC420CP-I Indoor Call Point with Isolator

Fireclass 514.800.805FC FC420CP-I Indoor Call Point with IsolatorA comprehensive range of call points for use with FireClass addressable systems using the robust and reliable FireClass open protocol. All the callpoints are designed to enable an alarm signal to be given by a plastic resettable element which means that the call point can be easily reset after it has been activated. Any change in the status of the switch is immediately communicated to the FireClass Control and Indicating Equipment CIE. All call points have an integral short-circuit isolator for monitoring the addressable loop wiring.The integral LED indicator is normally off. When the frangible element is broken an alarm is registered and the LED will illuminate red. If a section of the loop wiring adjacent to the call point is shorted the built-in short-circuit isolator trips isolating the shorted section and the LED is illuminated yellow. The status remains until the short is removed. If required an optional transparent hinged cover may be installed to guard against accidental operation. Both indoor and outdoor versions are available.FC420CP-I Addressable Indoor Call Point is designed to monitor and signal the condition of a switch contact that is operated by activating the deformable plastic element. A short circuit isolator is embedded.Key FeaturesIntegral Short Circuit IsolatorDual Colour LED IndicationEN54-11 CertificationCompact Modern StylingTest Key for Fast TestingIP67 Ingress Protection models for external applications

GBP 38.47
1

Fireclass 514.800.806FC FC421CP-I Outdoor Call Point with Isolator

Fireclass 514.800.806FC FC421CP-I Outdoor Call Point with Isolator

Fireclass 514.800.806FC FC421CP-I Outdoor Call Point with IsolatorA comprehensive range of call points for use with FireClass addressable systems using the robust and reliable FireClass open protocol. All the call points are designed to enable an alarm signal to be given by a plastic resettable element which means that the call point can be easily reset after it has been activated. Any change in the status of the switch is immediately communicated to the FireClass Control and Indicating Equipment CIE. All call points have an integral short-circuit isolator for monitoring the addressable loop wiring.The integral LED indicator is normally off. When the frangible element is broken an alarm is registered and the LED will illuminate red. If a section of the loop wiring adjacent to the call point is shorted the built-in short-circuit isolator trips isolating the shorted section and the LED is illuminated yellow. The status remains until the short is removed. If required an optional transparent hinged cover may be installed to guard against accidental operation. Both indoor and outdoor versions are available.FC421CP-I Addressable Break Glass Call Point is designed to monitor and signal the condition of a switch contact that is operated by activating the deformable plastic element. The FC421CP-I is fitted into a standard weatherproof call point housing. IP67 protection degree.Key FeaturesIntegral short circuit isolatorDual colour LED indicationEN54-11 certificationCompact modern stylingTest key for fast testingIP67 ingress protection models for external applications

GBP 175.49
1

Fireclass 557.202.018FC ANN820 40-Way 20 x Red Yellow 20 x Green Yellow LED Module

Fireclass 557.202.018FC ANN820 40-Way 20 x Red Yellow 20 x Green Yellow LED Module

Fireclass 557.202.018FC ANN820 40-Way 20 x Red Yellow 20 x Green Yellow LED ModuleThe ANN820 is ideal for use as a status moduledisplay for sprinkler panels according to the EN 12845 2004 A22009 standard but has many other potential applications such as fire damper and fire door status monitoring.As a sprinkler status display the REDYELLOW LED would indicate a Water Flow Alarm Fault Indication respectively from a Sprinkler Flow Switch or Alarm Valve and the GREENYELLOW LED would indicate the status of an Alarm Valve. GREEN would indicate the Alarm Valve is open in service and YELLOW would indicate the Alarm Valve is closed or partly closed technical alarm.Key Features20 x RedYellow LEDs20 x GreenYellow LEDs

GBP 383.03
1

Fireclass FC440AIB Addressable Base Sounder VID

Fireclass FC440AIB Addressable Base Sounder VID

Fireclass FC440AIB Addressable Base Sounder VIDThe FC440SB is an addressable sounder base specifically for use with the FireClass addressable detectors. The base incorporates a fire alarm sounder that carries its own address so it can be monitored and controlled from the fire alarm control panel which is independent of the detector fitted to the base.Both power and communications for the sounder and detector are provided by the digital loop. This helps to reduce installation costs as no additional wiring is required. Additionally the FC440AIB houses an addressable LED beacon to provide a visual indicator otherwise known as a VID.Key FeaturesA compact and discrete solutionOne point of installation for detector sounder and visual indicator with no additional wiringReflective Sound Monitoring RSMLight is electronically monitored by the control panelSelf-testIndependent addressable control of the sounder and beaconBuilt-in line isolatorSelect the tone volume and flash rate using panel configuration software15 selectable tones. Allows users to select the tone with which they are most familiarRealistic Conventional Bell Tone4 selectable volumes2 selectable flash ratesDifferent tones can be used for fire alarm and class changeVIDs and sounders are synchronised over the entire loopA locking pin supplied with the base which prevents the unauthorized removal of the detector

GBP 56.18
1

Fireclass FC440SB Addressable Base Sounder

Fireclass FC440SB Addressable Base Sounder

Fireclass FC440SB Addressable Base SounderThe FC440SB is an addressable sounder base specifically for use with the FireClass addressable detectors. The base incorporates a fire alarm sounder that carries its own address so it can be monitored and controlled from the fire alarm control panel which is independent of the detector fitted to the base.Both power and communications for the sounder and detector are provided by the digital loop. This helps to reduce installation costs as no additional wiring is required. Additionally the FC440AIB houses an addressable LED beacon to provide a visual indicator otherwise known as a VID.Key FeaturesA compact and discrete solutionOne point of installation for detector sounder and visual indicator with no additional wiringReflective Sound Monitoring RSMLight is electronically monitored by the control panelSelf-testIndependent addressable control of the sounder and beaconBuilt-in line isolatorSelect the tone volume and flash rate using panel configuration software15 selectable tones. Allows users to select the tone with which they are most familiarRealistic Conventional Bell Tone4 selectable volumes2 selectable flash ratesDifferent tones can be used for fire alarm and class changeVIDs and sounders are synchronised over the entire loopA locking pin supplied with the base which prevents the unauthorized removal of the detector

GBP 42.30
1

Fireclass FC410RIM Relay Interface Module

Fireclass FC410RIM Relay Interface Module

Fireclass FC410RIM Relay Interface ModuleThe FireClass FC410 RIM provides a single programmable loop powered relay output from the FireClass addressable system which can be programmed for a variety of applications including signalling fire conditions to plant machinery fire doors dampers security systems. The modulefits in the standard ancillary housings or double surface back box with 520 Ancillary Cover.Key FeaturesThe FireClass FC410 RIM relay coil is monitored and the state of the relay activated deactivated or stuck is reported to the FireClass Fire Controller.The LED may be turned ON or OFF by the controller during a relay activated condition.The FC 410 RIM relay contact is rated for 2A 24V d.c. max.This unit has two optoisolated terminals specifically for driving the HVR800.The HVR800 can be used to switch mains voltage.

GBP 34.93
1

Fireclass ROSHRDSRFC ROSHNI Sounder Complete with Deep Base Red

Fireclass ROSHRDSRFC ROSHNI Sounder Complete with Deep Base Red

Fireclass ROSHRDSRFC ROSHNI Sounder Complete with Deep Base RedThe ROSHRDSRFC is a flexible alarm sounder for fire and security applications complete with volume control and dil switch to provide 32 tones. Low profile Roshni with deep base offers IP65 protection. All Roshni sounders have synchronized start for self-synchronization without third wire.Fireclass have a range of sounders to meet a wide variety of alarm applications where loud penetrating and distinctive warnings must be given to alert people of fire situations.Key FeaturesEN54-3 approvedHigh sound output characteristicsLow current consumptionClean lines modern stylingEasy to install low installation costs32 tones availableDeep base fitting with knock out points for cable glandsLow profile design32 Signalling tones available - user selectableAutomatic synchronised phased startHigh sound output 102 db with low current consumptionVolume control as standard12v dc and 24v dc operation in the same unit

GBP 20.87
1

Fireclass 20-118FC Combined Roshni Sounder Strobe Complete with Deep Base IP65 VID

Fireclass 20-118FC Combined Roshni Sounder Strobe Complete with Deep Base IP65 VID

Fireclass 20-118FC Combined Roshni Sounder Strobe Complete with Deep Base IP65 VIDThe 20-118FC is a combined sounder and beacon which combines the features of the Roshni electronic sounder with a fully integrated Xenon beacon. These sounders are fully compatible with all Roshni tones. They are available in red with red lens.A flexible alarm sounder for Fire and Security applications complete with volume control and dil switch to provide 32 tones. All Roshni sounders have synchronised start for self-synchronisation without third wire.The unit is weather resistant to IP65.Key FeaturesDeep BaseIP Rating IP65SpecificationOperating Voltage 18 to 30VdcTypical Current 68mA 24VdcFlash Energy 0.7 JoulesFlash Frequency 60 per minuteTones Roshni Tones 3 14Sound Output 101dBA1mVolume Adjustment 0 to -20dBOperating Temperature -10C to 55CDimensions dia. x depth 93 x 92 mm shallow 93 x 121 mm deep

GBP 48.37
1

Fireclass 3-84-0301FC Floor Mounting Bracket for Wall Mounted Door Magnets

Fireclass 3-84-0301FC Floor Mounting Bracket for Wall Mounted Door Magnets

Fireclass 3-84-0301FC Floor Mounting Bracket for Wall Mounted Door MagnetsThe 3-84-0301FC is a 24V DC Floor Mounting Bracket for wall mounted door magnets.Floor Mounted door holders are designed to hold open fire doors for ease of access and release them when an alarm is triggered. They are ideally suited to applications where maximum protection is needed against vandalism or accidental damage such as prisons and schools.They are also suited to applications where the door is not opening near a wall. They feature a rugged cast aluminium housing a holding magnet with integral ejection pin and a manual release switch. Cable entry can be through the base or through a 20mm hole provided in the housing for surface mounted conduit or pyro.Key FeaturesRobust aluminium constructionManual release switchSurface cable entrySupplied with keeper plateApproved to EN1155 and CE marked

GBP 46.74
1

Fireclass 516.016.174FC ProReact EN Digital Sensor Control Unit

Fireclass 516.016.174FC ProReact EN Digital Sensor Control Unit

Fireclass 516.016.174FC ProReact EN Digital Sensor Control UnitThe ProReact Digital Sensor Control Unit is an EN54 certified dual zone alarm point distance locating module. It can monitor up to 2000 metres 6562 ft across two zones of digital LHD cable. It contains the popular interlock detection mode from the ProReact Digital Interface Monitor Module DiMM that reduces the possibility of false alarms.It is straightforward to connect the ProReact EN Digital Sensor Control Unit to a conventional fire alarm panel or to an addressable system using an IO zone or switch monitor module. It also has a built-in display which shows the state of each zone including the distance in metres and feet to the alarm point if an alarm is triggered.Key FeaturesCan monitor up to two zones of sensor cableManufactured in the UKThe first digital linear heat detection system to be certified to EN54-282016

GBP 490.63
1