374 results (0,20806 seconds)

Show all filters

Brand

Colour

Show all

Size

Show all

Merchant

Price (EUR)

Reset filter

Products
From
Shops

Forgefix Wafer Head TORX Compatible Construction T40 Screws Tan 8x220mm Tub 35 FORCS8220

Forgefix Wafer Head TORX Compatible Construction T40 Screws Tan 8x220mm Tub 35 FORCS8220

The Forgefast Wafer Head Torx Compatible Construction Screws are suitable for fixing into softwood or hardwood. They have a deep Torx compatible insert that reduces cam-out, provides higher torque levels and a firmer drive. Its super sharp tip gives immediate bite from the very first turn. A patented self-drilling thread removes the need to pre-drill the timber and reduces the probability of splitting, even when screwing close to the edge. They have a hardened case and core to give exceptional strength. Protected by elementech 2000 surface treatment which provides corrosion resistance up to 30 times longer than some standard zinc coated screws. They are highly resistant to pull out, they can flex by up to 35, reducing likelihood of the screw shearing when used in flexible materials. CE approved for use in load-bearing timber construction.

GBP 0.00
1

Forgefix ForgeFast TORX Compatible Decking Screws Reduced Head Tan 4.5X50 T15 Tub 600

Forgefix ForgeFast TORX Compatible Decking Screws Reduced Head Tan 4.5X50 T15 Tub 600

The ForgeFast Decking Screws Reduced Head TORX Compatible T15 are suitable for fixing into softwood or hardwood. They have a deep TORX compatible insert that reduces cam-out, provides higher torque levels and a firmer drive. Its super sharp tip gives immediate bite from the very first turn. A patented self-drilling thread removes the need to pre-drill the timber and reduces the probability of splitting, even when screwing close to the edge. They have a hardened case and core to give exceptional strength with a reduced head size that provides discreet fixing and superb countersinking. Protected by elementech 2000 surface treatment which provides corrosion resistance up to 30 times longer than some standard zinc coated screws. They are highly resistant to pull out, they can flex by up to 35mm, reducing likelihood of screw shearing when used in flexible materials. CE approved for use in load-bearing timber construction.

GBP 0.00
1

Forgefix Spectre Bit Set, 31 Piece FORSPBS31

Forgefix Spectre Bit Set, 31 Piece FORSPBS31

The ForgeFix 31 Piece Spectre Bit Set contains a selection of S2 heat-treated, hardened steel bits. Shock and wear proof, with precision machined tips for reduced cam out and screw head damage. Supplied in a handy carry case with the following 4 x 25mm Slotted Bits 3, 4, 5 and 6mm. 4 x 25mm Phillips Compatible Bits PH1, PH2(x2) and PH3. 5 x 25mm Pozidriv Compatible Bits PZ1, PZ2(x3) and PZ3. 13 x 25mm TORX Compatible Bits TX10, TX15, TX20(x3), TX25(x3), TX27, TX30(x3) and TX40. 4 x 25mm Hex Bits 3, 4, 5 and 6mm. 1 x Bit Holder 60mm.

GBP 0.00
1

Forgefix Cable Tie Black 4.6 x 200mm (Bag 100) FORCT200B

Forgefix Cable Tie Black 4.6 x 200mm (Bag 100) FORCT200B

These Forgefix Cable Ties are suitable for a range of tasks in areas including: gardening, electrical installations, sign installation, point of sale applications and much, much more. They can be joined together, increasing the size and diameter reach. The cable tie consists of a tape section with triangular teeth that slope in one direction, as in a ratchet mechanism. The head of the cable tie has a slot with a flexible pawl that rides up the slope of these teeth when the tape is inserted. Once the pointed tip of the cable tie has been pulled through the case and past the ratchet, it is prevented from being pulled back; the resulting loop may only be pulled tighter. Extensive size range from 100-450mm. Available in widths 2.5-8.0mm. The ties have a temperature range for continuous use from 40-85C.

GBP 0.00
1

Forgefix Cable Tie Natural/Clear 4.6 x 200mm (Bag 100) FORCT200N

Forgefix Cable Tie Natural/Clear 4.6 x 200mm (Bag 100) FORCT200N

These Forgefix Cable Ties are suitable for a range of tasks in areas including: gardening, electrical installations, sign installation, point of sale applications and much, much more. They can be joined together, increasing the size and diameter reach. The cable tie consists of a tape section with triangular teeth that slope in one direction, as in a ratchet mechanism. The head of the cable tie has a slot with a flexible pawl that rides up the slope of these teeth when the tape is inserted. Once the pointed tip of the cable tie has been pulled through the case and past the ratchet, it is prevented from being pulled back; the resulting loop may only be pulled tighter. Extensive size range from 100-450mm. Available in widths 2.5-8.0mm. The ties have a temperature range for continuous use from 40-85C.

GBP 3.19
1

Forgefix Cable Tie Natural/Clear 4.8 x 300mm (Bag 100)

Forgefix Cable Tie Natural/Clear 4.8 x 300mm (Bag 100)

These Forgefix Cable Ties are suitable for a range of tasks in areas including: gardening, electrical installations, sign installation, point of sale applications and much, much more. They can be joined together, increasing the size and diameter reach. The cable tie consists of a tape section with triangular teeth that slope in one direction, as in a ratchet mechanism. The head of the cable tie has a slot with a flexible pawl that rides up the slope of these teeth when the tape is inserted. Once the pointed tip of the cable tie has been pulled through the case and past the ratchet, it is prevented from being pulled back; the resulting loop may only be pulled tighter. Extensive size range from 100-450mm. Available in widths 2.5-8.0mm. The ties have a temperature range for continuous use from 40-85C.

GBP 4.19
1

Forgefix Cable Tie Black 4.8 x 300mm (Bag 100) FORCT300B

Forgefix Cable Tie Black 4.8 x 300mm (Bag 100) FORCT300B

These Forgefix Cable Ties are suitable for a range of tasks in areas including: gardening, electrical installations, sign installation, point of sale applications and much, much more. They can be joined together, increasing the size and diameter reach. The cable tie consists of a tape section with triangular teeth that slope in one direction, as in a ratchet mechanism. The head of the cable tie has a slot with a flexible pawl that rides up the slope of these teeth when the tape is inserted. Once the pointed tip of the cable tie has been pulled through the case and past the ratchet, it is prevented from being pulled back; the resulting loop may only be pulled tighter. Extensive size range from 100-450mm. Available in widths 2.5-8.0mm. The ties have a temperature range for continuous use from 40-85C.

GBP 4.19
1

Forgefix Cable Tie Natural/Clear 2.5 x 100mm (Bag 100) FORCT100N

Forgefix Cable Tie Natural/Clear 2.5 x 100mm (Bag 100) FORCT100N

These Forgefix Cable Ties are suitable for a range of tasks in areas including: gardening, electrical installations, sign installation, point of sale applications and much, much more. They can be joined together, increasing the size and diameter reach. The cable tie consists of a tape section with triangular teeth that slope in one direction, as in a ratchet mechanism. The head of the cable tie has a slot with a flexible pawl that rides up the slope of these teeth when the tape is inserted. Once the pointed tip of the cable tie has been pulled through the case and past the ratchet, it is prevented from being pulled back; the resulting loop may only be pulled tighter. Extensive size range from 100-450mm. Available in widths 2.5-8.0mm. The ties have a temperature range for continuous use from 40-85C.

GBP 2.39
1

Forgefix Cable Tie Black 2.5 x 100mm (Bag 100) FORCT100B

Forgefix Cable Tie Black 2.5 x 100mm (Bag 100) FORCT100B

These Forgefix Cable Ties are suitable for a range of tasks in areas including: gardening, electrical installations, sign installation, point of sale applications and much, much more. They can be joined together, increasing the size and diameter reach. The cable tie consists of a tape section with triangular teeth that slope in one direction, as in a ratchet mechanism. The head of the cable tie has a slot with a flexible pawl that rides up the slope of these teeth when the tape is inserted. Once the pointed tip of the cable tie has been pulled through the case and past the ratchet, it is prevented from being pulled back; the resulting loop may only be pulled tighter. Extensive size range from 100-450mm. Available in widths 2.5-8.0mm. The ties have a temperature range for continuous use from 40-85C.

GBP 1.49
1

Multi-Purpose Wood Screw Kit, 1100 Piece 2 x PZ2 Bits

Multi-Purpose Wood Screw Kit, 1100 Piece 2 x PZ2 Bits

The ForgeFix Organiser Pro 1100 Multi-Purpose Wood Screw Kit contains a selection of the most popular sizes. Each screw has a zinc yellow passivated coating for increased corrosion resistance. They also have a deep head recess for a firmer positive drive, as well as fast and easy insertion. Supplied in an organiser case with removable cups Contains: 130 x Multi-Purpose Wood Screws 3.5 x 25mm, 190 x Multi-Purpose Wood Screws 3.5 x 30mm, 130 x Multi-Purpose Wood Screws 4 x 20mm, 185 x Multi-Purpose Wood Screws 4 x 25mm, 150 x Multi-Purpose Wood Screws 4 x 30mm, 110 x Multi-Purpose Wood Screws 4 x 40mm, 80 x Multi-Purpose Wood Screws 4 x 50mm, 60 x Multi-Purpose Wood Screws 5 x 50mm, 65 x Multi-Purpose Wood Screws 5 x 70mm, 2 x 25mm PZ2 Bits

GBP 0.00
1

Forgefix High Tensile Set Screw ZP M8 X 25MM Bag 10

Forgefix High Tensile Set Screw ZP M8 X 25MM Bag 10

These Forgefix Set Screws are made from grade 8.8 steel and are zinc plated for increased resistance to corrosion. They are fully threaded and conform to DIN 933 standards.Can be used with many Nut types and washers. APPLICATION:For fastening together numerous types of material or to be fastened in to pre-tapped holes.Widely used in many engineering applications. Zinc coatings prevent oxidation of the protected metal to create a longer lasting finish. It does this by forming a barrier and by acting as a sacrificial anode if this barrier is damaged. Zinc oxide is a fine white dust that (in contrast to iron oxide) does not trigger a breakdown of the substrates surface integrity as it is formed. The zinc oxide, if left intact, can act as a barrier to further oxidation, in a way similar to the protection afforded to aluminum and stainless steels by their oxide layers.

GBP 0.00
1

Forgefix High Tensile Set Screw ZP M8 x 50mm Bag 10 FORHTSS850M

Forgefix High Tensile Set Screw ZP M8 x 50mm Bag 10 FORHTSS850M

These Forgefix Set Screws are made from grade 8.8 steel and are zinc plated for increased resistance to corrosion. They are fully threaded and conform to DIN 933 standards.Can be used with many Nut types and washers. APPLICATION:For fastening together numerous types of material or to be fastened in to pre-tapped holes.Widely used in many engineering applications. Zinc coatings prevent oxidation of the protected metal to create a longer lasting finish. It does this by forming a barrier and by acting as a sacrificial anode if this barrier is damaged. Zinc oxide is a fine white dust that (in contrast to iron oxide) does not trigger a breakdown of the substrates surface integrity as it is formed. The zinc oxide, if left intact, can act as a barrier to further oxidation, in a way similar to the protection afforded to aluminum and stainless steels by their oxide layers.

GBP 0.00
1

Forgefix Flat Washer Form B ZP M8 Bag 100 FORWASH8M

Forgefix Flat Washer Form B ZP M8 Bag 100 FORWASH8M

These Forgefix Form B Flat Washers are Zinc Plated for increased resistance to corrosion. Washers provide a smooth surface for the nut or bolt to bear on, making it less likely to loosen as a result of an uneven fastening surface. The main purpose of a washer is to distribute the load under a bolt head or the nut face. APPLICATION:On all manner of bolting applications. Can be used with all types of bolts and nuts. Zinc coatings prevent oxidation of the protected metal to create a longer lasting finish. It does this by forming a barrier and by acting as a sacrificial anode if this barrier is damaged. Zinc oxide is a fine white dust that (in contrast to iron oxide) does not trigger a breakdown of the substrates surface integrity as it is formed. The zinc oxide, if left intact, can act as a barrier to further oxidation, in a way similar to the protection afforded to aluminum and stainless steels by their oxide layers.

GBP 1.83
1

Forgefix High Tensile Set Screw ZP M8 x 60mm Forge Pack 4 FORFPHBN860

Forgefix High Tensile Set Screw ZP M8 x 60mm Forge Pack 4 FORFPHBN860

These Forgefix Set Screws are made from grade 8.8 steel and are zinc plated for increased resistance to corrosion. They are fully threaded and conform to DIN 933 standards. Can be used with many Nut types and washers. APPLICATION For fastening together numerous types of material or to be fastened in to pre-tapped holes. Widely used in many engineering applications. Zinc coatings prevent oxidation of the protected metal to create a longer lasting finish. It does this by forming a barrier and by acting as a sacrificial anode if this barrier is damaged. Zinc oxide is a fine white dust that (in contrast to iron oxide) does not trigger a breakdown of the substrate&rsquos surface integrity as it is formed. The zinc oxide, if left intact, can act as a barrier to further oxidation, in a way similar to the protection afforded to aluminum and stainless steels by their oxide layers. High Tensile Set Screw ZP M8 x 60mm Forge Pack 4

GBP 0.00
1

Forgefix Flat Washer Form B ZP M6 Bag 100 FORWASH6M

Forgefix Flat Washer Form B ZP M6 Bag 100 FORWASH6M

These Forgefix Form B Flat Washers are Zinc Plated for increased resistance to corrosion. Washers provide a smooth surface for the nut or bolt to bear on, making it less likely to loosen as a result of an uneven fastening surface. The main purpose of a washer is to distribute the load under a bolt head or the nut face. APPLICATION:On all manner of bolting applications. Can be used with all types of bolts and nuts. Zinc coatings prevent oxidation of the protected metal to create a longer lasting finish. It does this by forming a barrier and by acting as a sacrificial anode if this barrier is damaged. Zinc oxide is a fine white dust that (in contrast to iron oxide) does not trigger a breakdown of the substrates surface integrity as it is formed. The zinc oxide, if left intact, can act as a barrier to further oxidation, in a way similar to the protection afforded to aluminum and stainless steels by their oxide layers.

GBP 2.09
1

Forgefix Flat Washer Form B ZP M12 Bag 100 FORWASH12M

Forgefix Flat Washer Form B ZP M12 Bag 100 FORWASH12M

These Forgefix Form B Flat Washers are Zinc Plated for increased resistance to corrosion. Washers provide a smooth surface for the nut or bolt to bear on, making it less likely to loosen as a result of an uneven fastening surface. The main purpose of a washer is to distribute the load under a bolt head or the nut face. APPLICATION:On all manner of bolting applications. Can be used with all types of bolts and nuts. Zinc coatings prevent oxidation of the protected metal to create a longer lasting finish. It does this by forming a barrier and by acting as a sacrificial anode if this barrier is damaged. Zinc oxide is a fine white dust that (in contrast to iron oxide) does not trigger a breakdown of the substrates surface integrity as it is formed. The zinc oxide, if left intact, can act as a barrier to further oxidation, in a way similar to the protection afforded to aluminum and stainless steels by their oxide layers.

GBP 4.19
1

Forgefix Flat Washer Form B ZP M5 Bag 100

Forgefix Flat Washer Form B ZP M5 Bag 100

These Forgefix Form B Flat Washers are Zinc Plated for increased resistance to corrosion. Washers provide a smooth surface for the nut or bolt to bear on, making it less likely to loosen as a result of an uneven fastening surface. The main purpose of a washer is to distribute the load under a bolt head or the nut face. APPLICATION:On all manner of bolting applications. Can be used with all types of bolts and nuts. Zinc coatings prevent oxidation of the protected metal to create a longer lasting finish. It does this by forming a barrier and by acting as a sacrificial anode if this barrier is damaged. Zinc oxide is a fine white dust that (in contrast to iron oxide) does not trigger a breakdown of the substrates surface integrity as it is formed. The zinc oxide, if left intact, can act as a barrier to further oxidation, in a way similar to the protection afforded to aluminum and stainless steels by their oxide layers.

GBP 1.99
1

Forgefix Flat Washer Form B ZP M4 Bag 100 FORWASH4M

Forgefix Flat Washer Form B ZP M4 Bag 100 FORWASH4M

These Forgefix Form B Flat Washers are Zinc Plated for increased resistance to corrosion. Washers provide a smooth surface for the nut or bolt to bear on, making it less likely to loosen as a result of an uneven fastening surface. The main purpose of a washer is to distribute the load under a bolt head or the nut face. APPLICATION:On all manner of bolting applications. Can be used with all types of bolts and nuts. Zinc coatings prevent oxidation of the protected metal to create a longer lasting finish. It does this by forming a barrier and by acting as a sacrificial anode if this barrier is damaged. Zinc oxide is a fine white dust that (in contrast to iron oxide) does not trigger a breakdown of the substrates surface integrity as it is formed. The zinc oxide, if left intact, can act as a barrier to further oxidation, in a way similar to the protection afforded to aluminum and stainless steels by their oxide layers.

GBP 1.62
1

Forgefix Flat Washer Form B ZP ZP M16 Bag 10 FORWASH16M

Forgefix Flat Washer Form B ZP ZP M16 Bag 10 FORWASH16M

These Forgefix Form B Flat Washers are Zinc Plated for increased resistance to corrosion. Washers provide a smooth surface for the nut or bolt to bear on, making it less likely to loosen as a result of an uneven fastening surface. The main purpose of a washer is to distribute the load under a bolt head or the nut face. APPLICATION:On all manner of bolting applications. Can be used with all types of bolts and nuts. Zinc coatings prevent oxidation of the protected metal to create a longer lasting finish. It does this by forming a barrier and by acting as a sacrificial anode if this barrier is damaged. Zinc oxide is a fine white dust that (in contrast to iron oxide) does not trigger a breakdown of the substrates surface integrity as it is formed. The zinc oxide, if left intact, can act as a barrier to further oxidation, in a way similar to the protection afforded to aluminum and stainless steels by their oxide layers.

GBP 1.63
1

Forgefix Flat Washer Form B ZP ZP M20 Bag 10 FORWASH20M

Forgefix Flat Washer Form B ZP ZP M20 Bag 10 FORWASH20M

These Forgefix Form B Flat Washers are Zinc Plated for increased resistance to corrosion. Washers provide a smooth surface for the nut or bolt to bear on, making it less likely to loosen as a result of an uneven fastening surface. The main purpose of a washer is to distribute the load under a bolt head or the nut face. APPLICATION:On all manner of bolting applications. Can be used with all types of bolts and nuts. Zinc coatings prevent oxidation of the protected metal to create a longer lasting finish. It does this by forming a barrier and by acting as a sacrificial anode if this barrier is damaged. Zinc oxide is a fine white dust that (in contrast to iron oxide) does not trigger a breakdown of the substrates surface integrity as it is formed. The zinc oxide, if left intact, can act as a barrier to further oxidation, in a way similar to the protection afforded to aluminum and stainless steels by their oxide layers.

GBP 1.79
1

Forgefix Flat Washer Form B ZP M3 Bag 100 FORWASH3M

Forgefix Flat Washer Form B ZP M3 Bag 100 FORWASH3M

These Forgefix Form B Flat Washers are Zinc Plated for increased resistance to corrosion. Washers provide a smooth surface for the nut or bolt to bear on, making it less likely to loosen as a result of an uneven fastening surface. The main purpose of a washer is to distribute the load under a bolt head or the nut face. APPLICATION:On all manner of bolting applications. Can be used with all types of bolts and nuts. Zinc coatings prevent oxidation of the protected metal to create a longer lasting finish. It does this by forming a barrier and by acting as a sacrificial anode if this barrier is damaged. Zinc oxide is a fine white dust that (in contrast to iron oxide) does not trigger a breakdown of the substrates surface integrity as it is formed. The zinc oxide, if left intact, can act as a barrier to further oxidation, in a way similar to the protection afforded to aluminum and stainless steels by their oxide layers.

GBP 1.59
1

Forgefix Flat Washer Form B ZP M10 Bag 100

Forgefix Flat Washer Form B ZP M10 Bag 100

These Forgefix Form B Flat Washers are Zinc Plated for increased resistance to corrosion. Washers provide a smooth surface for the nut or bolt to bear on, making it less likely to loosen as a result of an uneven fastening surface. The main purpose of a washer is to distribute the load under a bolt head or the nut face. APPLICATION:On all manner of bolting applications. Can be used with all types of bolts and nuts. Zinc coatings prevent oxidation of the protected metal to create a longer lasting finish. It does this by forming a barrier and by acting as a sacrificial anode if this barrier is damaged. Zinc oxide is a fine white dust that (in contrast to iron oxide) does not trigger a breakdown of the substrates surface integrity as it is formed. The zinc oxide, if left intact, can act as a barrier to further oxidation, in a way similar to the protection afforded to aluminum and stainless steels by their oxide layers.

GBP 2.99
1

Forgefix Flat Penny Washer ZP M8 x 25mm Bag 10 FORPENY8M

Forgefix Flat Penny Washer ZP M8 x 25mm Bag 10 FORPENY8M

These Forgefix Flat Penny washers, have a 25mm outside diameter. The washers are bright zinc plated for increased corrosion resistance, and have been given the name 'Penny Washer' due to their similarity in size to an old penny. Washers provide a smooth surface for the nut or bolt to bear on, making it less likely to loosen as a result of an uneven fastening surface. The main purpose of a washer is to distribute the load under a bolt head or the nut face. APPLICATION:On all manner of bolting applications. Can be used with all types of bolts and nuts. Zinc coatings prevent oxidation of the protected metal to create a longer lasting finish. It does this by forming a barrier and by acting as a sacrificial anode if this barrier is damaged. Zinc oxide is a fine white dust that (in contrast to iron oxide) does not trigger a breakdown of the substrates surface integrity as it is formed. The zinc oxide, if left intact, can act as a barrier to further oxidation, in a way similar to the protection afforded to aluminum and stainless steels by their oxide layers.

GBP 1.69
1

Forgefix Flat Penny Washer ZP M10 x 25mm Bag 10 FORPENY10M

Forgefix Flat Penny Washer ZP M10 x 25mm Bag 10 FORPENY10M

These Forgefix Flat Penny washers, have a 25mm outside diameter. The washers are bright zinc plated for increased corrosion resistance, and have been given the name 'Penny Washer' due to their similarity in size to an old penny. Washers provide a smooth surface for the nut or bolt to bear on, making it less likely to loosen as a result of an uneven fastening surface. The main purpose of a washer is to distribute the load under a bolt head or the nut face. APPLICATION:On all manner of bolting applications. Can be used with all types of bolts and nuts. Zinc coatings prevent oxidation of the protected metal to create a longer lasting finish. It does this by forming a barrier and by acting as a sacrificial anode if this barrier is damaged. Zinc oxide is a fine white dust that (in contrast to iron oxide) does not trigger a breakdown of the substrates surface integrity as it is formed. The zinc oxide, if left intact, can act as a barrier to further oxidation, in a way similar to the protection afforded to aluminum and stainless steels by their oxide layers.

GBP 1.69
1

Forgefix Flat Penny Washer ZP M6 x 25mm Bag 10 FORPENY6M

Forgefix Flat Penny Washer ZP M6 x 25mm Bag 10 FORPENY6M

These Forgefix Flat Penny washers, have a 25mm outside diameter. The washers are bright zinc plated for increased corrosion resistance, and have been given the name 'Penny Washer' due to their similarity in size to an old penny. Washers provide a smooth surface for the nut or bolt to bear on, making it less likely to loosen as a result of an uneven fastening surface. The main purpose of a washer is to distribute the load under a bolt head or the nut face. APPLICATION:On all manner of bolting applications. Can be used with all types of bolts and nuts. Zinc coatings prevent oxidation of the protected metal to create a longer lasting finish. It does this by forming a barrier and by acting as a sacrificial anode if this barrier is damaged. Zinc oxide is a fine white dust that (in contrast to iron oxide) does not trigger a breakdown of the substrates surface integrity as it is formed. The zinc oxide, if left intact, can act as a barrier to further oxidation, in a way similar to the protection afforded to aluminum and stainless steels by their oxide layers.

GBP 1.69
1