bluetooth remote shutter from GBP 8 | See the cheapest prices and offers on css.lazzaweb.dk

Gent S3-CONTROL HandiLink IR Remote Control

Gent S3-CONTROL HandiLink IR Remote ControlThe S3-CONTROL is a HandiLink IR Remote Control which has been designed for use with the S-Cube range of sounders.With the remote control individual sounders can be turned on and the sounder volume adjusted remotely from up to 3m away.The HandiLink IR Remote Control allows the user to adjust individual sounder levels and to turn offon individual sounders without the need for physical access to the unit itself. The facility is only available when the sounders are enabled on the panel and additional password protected access is required to use this facility to ensure parameters are not changed accidentally or with the intention of disrupting the environment.

GBP 140.98

1

Gent 781814 Conventional Remote LED

Gent 781814 Conventional Remote LEDManufactured by Gent the Conventional Remote LED 781814 is part of the new ES detect range and has been developed to work in conjunction with any Xenex PanelsRed prism is continuously or pulsed illuminated by 3 LEDs. Connection by 2-wire cable to detector base.Key Features3 continuously or pulsed LEDsPower-saving compact indicatorHousing ABS plasticPower-saving compact indicatorViewing angle 180Default activation by a connected detectorConfigurable activation by any system event programmable via tools 8000 software

GBP 8.50

1

Gent 13449-01 34000 Series Remote LED

Gent 13449-01 34000 Series Remote LEDThe 13449-01 is a remote LED that is used where detectors are not visible such as ceiling voids or rooms or spaces that may not have easy access.It has been designed for use withS4-700 bases.Key FeaturesMax Quantity per Loop 100Approx Weight 0.34kgOperating Temperature minus 10C to 50CIngress Protection IP40Device Load Factor 1For use with S4-700 bases

GBP 18.26

1

Gent PRINTER-HAND Hand Held Printer - Thermal Type 58mm

Gent PRINTER-HAND Hand Held Printer - Thermal Type 58mmIs a Remote Printer Assembly for Vigilon Panels. Used to print events device addresss and label data. Connects by RS232 Serial Link and use 58mm Thermal Paper Rolls.Key FeaturesGent Printer Hand - Remote Printer Assembly for Vigilon Panels58mm thermal handheld printer

GBP 1544.00

1

Gent XEN-FFR Fire Fault Relay Unit

Gent XEN-FFR Fire Fault Relay UnitThe Gent Xenex XEN-FFR Fire Fault Relay is designed to either add an additional fire and fault relay or provide a remote firefault relay from the main control panel.Key FeaturesConnects directly to the Gent Xenex fire alarm panelAdds a fault and fire interface

GBP 95.96

1

Gent S3-SN-ST-WR-V2 2 Way SounderStrobe - White Body - Red Lens - 100 dBA

Gent S3-SN-ST-WR-V2 2 Way SounderStrobe - White Body - Red Lens - 100 dBAThe GENT S3-SN-ST-WR 2-Way SounderStrobe delivers a sound output of up to 100 dBA and offers remote configuration capabilities via the HandiLink IR remote control. During commissioning mode individual sounders can be activated and volume levels adjusted without the need for physical access to the device.This streamlined setup process significantly reduces commissioning time. To prevent unauthorized or accidental changes access to configuration settings is protected by a password which must be entered at the control panel. This ensures system integrity and prevents disruption in the environment where the device is installed.Key Features10.8 - 28.8 V compatible with 12 or 24V systemsIP31 rated100 dBA output - 2 dBA32 sounder tones availableA third wire option allows the selection of 2 alternative sounds. Ideal for class change applications4 voice phrases and bell tone available as standardLegacy product

GBP 80.66

1

Gent VSINTM-PCB02 Spare PCB for S4 Mains Powered Interface - 1.5A S4-34440-02

Gent VSINTM-PCB02 Spare PCB for S4 Mains Powered Interface - 1.5A S4-34440-02VSINTM-PCB02 is a spare PCB for the S4 Mains Powered Interface - 1.5A - Product codeS4-34440-02The Gent Interface range features several different types of interfaces which can be used depending on the requirements of the individual site.Gent Low Voltage InterfacesThe standard Gent Interfaces are low voltage versions which are ideal for connecting the fire alarm system to standard services around a building. There are both input and output versions available with a variety of numbers of channels. To compliment the interface range there is also various mounting options to pick from.Gent Mains Rated Interfaces for Vigilon SystemsFor applications where the interface is required to be mains rated there are options available. These units are capable of switching a 240v supply on activation of a fire alarm system. They are ideal for connecting the fire system to services such as roller shutter doors or door systems using a mains voltage.Gent Vigilon Interfaces with Metal EnclosuresThere are new Gent interfaces available which use a plastic type enclosure. However traditionally the Gent Interface range used a metal housing.

GBP 580.91

1

Gent S3-VP-ST-RR 2 Way Voice SounderStrobe Red 100 dBA IP31

Gent S3-VP-ST-RR 2 Way Voice SounderStrobe Red 100 dBA IP31Low profile GENT sounder ideal for use in environments where aesthetics should be discrete as possible.The GENT S3-VP-ST-RR 2-way sounderstrobe is rated at 100 dBA but can be remotely configured using the HandiLink IR remote control to turn on individual sounders when in commissioning mode and to adjust the volume.Access is no longer required to the sounder unit meaning commissioning time is cut down considerably. To enable this function a password is required at the panel so settings cannot be changed by accident or with the intention of disrupting the environment in which it is located.Key FeaturesColour Red100 dBAIP31 ratedLegacy product

GBP 107.86

1

Gent 800371 Conventional S-Quad Optical Smoke Detector

Gent 800371 Conventional S-Quad Optical Smoke DetectorThe new ES Detect range S Quad conventional has been developed to operate with the Xenex panel. The ES Detect range replaces the Vision 2020 range.The Gent detector is a scattered-light smoke detector for reliable early detection of fires. Fire detector with decentralized intelligence automatic function self-test automatic environmental adaptation alarm and operating data storage and alarm display.A remote indicator can also be connected.Key FeaturesUniform response sensitivity of the detector for all different types of fire for the multi-sensor detectorsLarge distance between signal and interference magnitudes due to special sensor and electronics design for suppressing electromagnetic influencesAutomatic adaptation to varying environmental influencesElectronic compensation of long-term influences of contamination or aging

GBP 27.44

1

Gent 800177 Conventional S-Quad High Temperature Fixed Heat Detector

Gent 800177 Conventional S-Quad High Temperature Fixed Heat DetectorThe ES Detect range S Quad conventional has been developed to operate with the Xenex panel. The ES Detect range replaces the Vision 2020 range.The heat detector is an automatic heat detector with fast semiconductor sensor for reliable detection of fires with distinctive heat. Fire detector with decentralized intelligence automatic function self-test alarm and operations data storage and alarm display. A remote indicator can also be connected.Key FeaturesUniform response sensitivity of the detector for all different types of fire for the multi-sensor detectorsLarge distance between signal and interference magnitudes due to special sensor and electronics design for suppressing electromagnetic influencesAutomatic adaptation to varying environmental influencesElectronic compensation of long-term influences of contamination or aging

GBP 41.28

1

Gent VSINTSC-PCB04 Spare PCB for S4 Four Channel Mains Switching IF S4-34404

Gent VSINTSC-PCB04 Spare PCB for S4 Four Channel Mains Switching IF S4-34404The VSINTSC-PCB04 is a spare PCB for the S4 Four Channel Mains Switching IF - product code S4-34404.The Gent Interface range features several different types of interfaces which can be used depending on the requirements of the individual site.Gent Low Voltage InterfacesThe standard Gent Interfaces are low voltage versions which are ideal for connecting the fire alarm system to standard services around a building. There are both input and output versions available with a variety of numbers of channels. To compliment the interface range there is also various mounting options to pick from.Gent Mains Rated Interfaces for Vigilon SystemsFor applications where the interface is required to be mains rated there are options available. These units are capable of switching a 240v supply on activation of a fire alarm system. They are ideal for connecting the fire system to services such as roller shutter doors or door systems using a mains voltage.Gent Vigilon Interfaces with Metal EnclosuresThere are new Gent interfaces available which use a plastic type enclosure. However traditionally the Gent Interface range used a metal housing. There are still units available which feature these enclosures. They can be viewed within our product portfolio.

GBP 273.47

1

Gent VSINTM-PCB12 Spare PCB for S4 Mains Powered Interface - 2.5A S4-34440-12

Gent VSINTM-PCB12 Spare PCB for S4 Mains Powered Interface - 2.5A S4-34440-12The VSINTM-PCB12 is a spare PCB for the S4 Mains Powered Interface - 2.5A Product code S4-34440-12The Gent Interface range features several different types of interfaces which can be used depending on the requirements of the individual site.Gent Low Voltage InterfacesThe standard Gent Interfaces are low voltage versions which are ideal for connecting the fire alarm system to standard services around a building. There are both input and output versions available with a variety of numbers of channels. To compliment the interface range there is also various mounting options to pick from.Gent Mains Rated Interfaces for Vigilon SystemsFor applications where the interface is required to be mains rated there are options available. These units are capable of switching a 240v supply on activation of a fire alarm system. They are ideal for connecting the fire system to services such as roller shutter doors or door systems using a mains voltage.Gent Vigilon Interfaces with Metal EnclosuresThere are new Gent interfaces available which use a plastic type enclosure. However traditionally the Gent Interface range used a metal housing. There are still units available which feature these enclosures. They can be viewed within our product portfolio.

GBP 770.30

1

Gent VSINTSC-PCB01 Spare PCB for S4 Single Channel Mains Switching IF S4-34401

Gent VSINTSC-PCB01 Spare PCB for S4 Single Channel Mains Switching IF S4-34401The VSINTSC-PCB01 is a spare or replacement PCB for the S4 Single Channel Mains Switching IF - product code S4-34401.The Gent Interface range features several different types of interfaces which can be used depending on the requirements of the individual site.Gent Low Voltage InterfacesThe standard Gent Interfaces are low voltage versions which are ideal for connecting the fire alarm system to standard services around a building. There are both input and output versions available with a variety of numbers of channels. To compliment the interface range there is also various mounting options to pick from.Gent Mains Rated Interfaces for Vigilon SystemsFor applications where the interface is required to be mains rated there are options available. These units are capable of switching a 240v supply on activation of a fire alarm system. They are ideal for connecting the fire system to services such as roller shutter doors or door systems using a mains voltage.Gent Vigilon Interfaces with Metal EnclosuresThere are new Gent interfaces available which use a plastic type enclosure. However traditionally the Gent Interface range used a metal housing. There are still units available which feature these enclosures. They can be viewed within our product portfolio.

GBP 179.20

1

Gent S3IP-VP-W IP55 2 Way Voice Sounder - White 100 dBA

Gent S3IP-VP-W IP55 2 Way Voice Sounder - White 100 dBAA low profile Gent sounder ideal for use in environments where aesthetics should be discrete as possible.The S3IP-VP-W IP55 2-way Voice sounder is rated at 100 dBA but can be remotely configured using the HandiLink IR remote control to turn on individual sounders when in commissioning mode and to adjust the volume.Access is no longer required to the sounder unit meaning commissioning time is cut down considerably. To enable this function a password is required at the panel so settings cannot be changed by accident or with the intention of disrupting the environment in which it is located.Key Features100 dBA output - 2 dBAIP55 ratedIR control operating distance 3m32 sounder tones available4 voice phrases and bell tone available as standardLegacy product

GBP 92.30

1

Gent S3-VP-R 2 Way Voice Sounder - Red 100 dBA IP31

Gent S3-VP-R 2 Way Voice Sounder - Red 100 dBA IP31A low profile Gent sounder ideal for use in environments where aesthetics should be discrete as possible.The S3IP-VP-W IP55 2-way Voice sounder is rated at 100 dBA but can be remotely configured using the HandiLink IR remote control to turn on individual sounders when in commissioning mode and to adjust the volume.Access is no longer required to the sounder unit meaning commissioning time is cut down considerably. To enable this function a password is required at the panel so settings cannot be changed by accident or with the intention of disrupting the environment in which it is located.Key Features100 dBA output - 2 dBAIP31 ratedIR control operating distance 3m32 sounder tones available4 voice phrases and bell tone available as standardLegacy product

GBP 90.38

1

Gent 800271 Conventional S-Quad Rate of Rise Heat Detector

Gent 800271 Conventional S-Quad Rate of Rise Heat DetectorThe ES Detect range S Quad conventional has been developed to operate with the Xenex panel. The ES Detect range replaces the Vision 2020 range.Automatic heat detector with fast semiconductor sensor for reliable detection of fires with rapid temperature rise and integrated maximum value function for the recognition of fires with slow temperature rises. Fire detector with decentralized intelligence automatic function self-test alarm and operations data storage and alarm display. A remote indicator can also be connected.Key FeaturesUniform response sensitivity of the detector for all different types of fire for the multi-sensor detectorsLarge distance between signal and interference magnitudes due to special sensor and electronics design for suppressing electromagnetic influencesAutomatic adaptation to varying environmental influencesElectronic compensation of long-term influences of contamination or aging

GBP 27.52

1

Gent S4-720 Heat Detector

Gent S4-720 Heat DetectorThe S4-720 Heat Sensor is a Gent Vigilon S-Quad sensor with a unique combination of sensing elements to provide quick intelligent fire decisions. The fully programmable heat sensor allows for significantly reduced false alarms.Key FeaturesComplete range of sensors with combinations of advanced sensing technologies including heat dual angle optical scatter and carbon monoxide COCombined sensing of carbon monoxide with dual angle optical scatter and heat allows a higher level of false alarm immunity in presence of steam and while still maintaining the integrity of detecting firesEach sensor has certified sensitivity settings that suit certain environmentsapplications and may be programmed for different times of the day if requiredShort circuit Isolator in each deviceConfigurable inputoutput connection for remote indicator or supervisory input fully synchronised sound patterns via the control panelHeat sensorLPCB ApprovedProgrammable sensor states for different time framesMonitored line inputoutputBase supplied separately

GBP 65.40

1

Gent 34000 S-Quad Adapter Base S4-700-34K

Gent 34000 S-Quad Adapter Base S4-700-34KThe 34000 S-Quad adapter base provides a simple and cost-effective solution for the replacement of ageing 34000 range sensors with current S-Quad Sensors.The adapter base fits neatly onto an S-Quad sensor enabling it to be fitted directly onto an existing 34000 base without the need for removal of the old base and rewiring of a replacement base.The 34000 adapter fits both 3-way and 4-way bases supporting remote LED but is not compatible with 34000 devices fitted to a ceiling trim ring.Key FeaturesFast cost effective solution for replacement of ageing sensorsSimple locateturn locking mechanismNo need for additional S-Quad detector baseListed as a compatible device for use with the S-Quad range of automatic sensorsDimensions Diameter 112mm Height 35mmWeight 82gColour White RAL 9010Material ABSOperating Temperature -20oC to 54oCThis video belongs to Honeywell Gent.

GBP 30.91

1

Gent 800171 Conventional S-Quad Fixed Heat Detector

Gent 800171 Conventional S-Quad Fixed Heat DetectorManufactured by Gent the Conventional S-Quad Fixed Heat Detector 800171 is an automatic heat detector with fast semi-conductor sensor for the reliable detection of fires with strong heat development. Process detector with decentralized intelligence automatic function self-alarm and operating data storage and alarm indication. A remote indicator can also be connected.Key FeaturesUniform response sensitivity of the detector for all different types of fire for the multi-sensor detectorsLarge distance between signal and interference magnitudes due to special sensor and electronics design for suppressing electromagnetic influencesAutomatic adaptation to varying environmental influencesElectronic compensation of long-term influences of contamination or agingSpecificationsOperating voltage 8 to 42 V DCAlarm current 9 V DC typ. 9 mAAir speed 0 to 25.4 msStorage temperature -25 C to 75 CMinimum operating temperature -20CAir humidity 95 Type of protection IP43 with base optionMaterial ABSColor white similar to RAL 9010Weight ca. 110 gDimensions 117 mm H 49 mm 62 mm incl. base

GBP 26.76

1

Gent S3 Red Body Sounder Standard Power with Red VAD - S3-S-VAD-LPR-R

Gent S3 Red Body Sounder Standard Power with Red VAD - S3-S-VAD-LPR-RS-Cubed offers a comprehensive range of loop powered alarm sounders with integrated voice and EN54-23 certified visual alarms. Combined with flexible configuration from the Gent by Honeywell fire control panels this loop powered device can give a differentiated combination of audible and visual alarms for alert and general evacuation.Very low power consumption means that the Vigilon system offers more high performance sounders and VADs on the loop than any other manufacturerKey FeaturesEach loop can support up to 200 voice sounders 100 visual alarm devices VADs and up to 70 combined sounder VADsEN54-23 VADs with adjustable light coverage matching the sounder outputComprehensive and easy to use design and commissioning toolsFour voice phrases and a bell tone available as standardVoice and tone modes can be freely configured within the same sounderActive background monitoring of sounder and VAD circuitsAdjust the sounder volume via the commissioning tool the panel or the HandiLink infrared remote control

GBP 121.45

1

Gent Optical Detector S4-715

Gent S4-715 Optical DetectorA new concept in fire detection a truly intelligent analogue sensor combining exceptional computing power in the sensor as well as the panel to achieve an extremely fast response to a real fire whilst minimising the risk of false alarms.Key FeaturesComplete range of sensors with combinations of advanced sensing technologies including heat dual angle optical scatter and carbon monoxide COCombined sensing of carbon monoxide with dual angle optical scatter and heat allows a higher level of false alarm immunity in presence of steam and while still maintaining the integrity of detecting firesEach sensor has certified sensitivity settings that suit certain environments applications and may be programmed for different times of the day if requiredShort circuit Isolator in each deviceConfigurable inputoutput connection for remote indicator or supervisory input fully synchronised sound patterns via the control panelSensor sounders have adjustable sound level and tones to match system soundersSounder element monitoring and over-load protection to ensure operation even in event of cable faultSound output synchronised and compatible with S-Quad range of EN54-23 VADs

GBP 50.95

1

Gent S3 White Body Sounder High Power with Red VAD - S3-S-VAD-HPR-W

Gent S3 White Body Sounder High Power with Red VAD - S3-S-VAD-HPR-WS-Cubed offers a comprehensive range of loop powered alarm sounders with integrated voice and EN54-23 certified visual alarms. Combined with flexible configuration from the Gent by Honeywell fire control panels this loop powered device can give a differentiated combination of audible and visual alarms for alert and general evacuation.Very low power consumption means that the Vigilon system offers more high performance sounders and VADs on the loop than any other manufacturerKey FeaturesEach loop can support up to 200 voice sounders 100 visual alarm devices VADs and up to 70 combined sounder VADsEN54-23 VADs with adjustable light coverage matching the sounder outputComprehensive and easy to use design and commissioning toolsFour voice phrases and a bell tone available as standardVoice and tone modes can be freely configured within the same sounderActive background monitoring of sounder and VAD circuitsAdjust the sounder volume via the commissioning tool the panel or the HandiLink infrared remote control

GBP 155.42

1

Gent S4-711 Dual Optical Heat Detector

Gent S4-711 Dual Optical Heat DetectorThe S4-711 is specifically designed to be used with the Gent Vigilon range of Analogue Addressable Control Panels. This detector is a Dual Optical Type Analogue Addressable Smoke Detector combined with a Heat Detection Element. This product requires a Gent S4-700 base for mounting.A truly intelligent analogue sensor combining local processing in the sensor and the panel to achieve an immediate response to real fires whilst minimising the risk of false alarms.Key FeaturesComplete range of sensors with combinations of advanced sensing technologies including heat dual angle optical scatter and carbon monoxide COCombined sensing of carbon monoxide with dual angle optical scatter and heat allows a higher level of false alarm immunity in presence of steam and while still maintaining the integrity of detecting firesEach sensor has certified sensitivity settings that suit certain environmentsapplications and may be programmed for different times of the day if requiredShort circuit Isolator in each deviceConfigurable inputoutput connection for remote indicator or supervisory input fully synchronised sound patterns via the control panelSensor sounders have adjustable sound level and tones to match system soundersSounder element monitoring and over-load protection to ensure operation even in event of cable faultSound output synchronised and compatible with S-Quad range of EN54-23 VADs

GBP 85.78

1

Gent S4 CO Dual Optical Heat Sensor Voice Sounder High Power Red VAD S4-911-V-VAD-HPR

Gent S4 CO Dual Optical Heat Sensor Voice Sounder High Power Red VAD S4-911-V-VAD-HPRThe S4-911-V-VAD-HPR Dual Optical Heat Multi Sensor Voice and High Power Red VAD features a unique combination of sensing elements to provide easy and quick intelligent fire decisions. This device is designed for use with the Gent Vigilon range of analogue addressable fire alarm control panels.Key FeaturesComplete range of sensors with combinations of advanced sensing technologies including heat dual angle optical scatter and carbon monoxide COCombined sensing of carbon monoxide with dual angle optical scatter and heat allows a higher level of false alarm immunity in presence of steam and while still maintaining the integrity of detecting firesEach sensor has certified sensitivity settings that suit certain environments applications and may be programmed for different times of the day if requiredShort circuit Isolator in each deviceConfigurable input output connection for remote indicator or supervisory input fully synchronised sound patterns via the control panelSensor sounders have adjustable sound level and tones to match system soundersSounder element monitoring and over-load protection to ensure operation even in event of cable faultSound output synchronised and compatible with S-Quad range of EN54-23 VADs

GBP 245.45

1

Gent S3 Red Body Sounder High Power with Red VAD - S3-S-VAD-HPR-R

Gent S3 Red Body Sounder High Power with Red VAD - S3-S-VAD-HPR-RThe Gent S3-S-VAD-HPR-R Sounder with High Power VAD red bodyred lens loop powered alarm sounder with high power visual alarm device for Gent Vigilon fire alarm panels.The sounder has a very low power consumption resulting in the Vigilon system having a higher performance sounder and VADS on the loop than any other manufacturer.S-Cubed offers a comprehensive range of loop powered alarm sounders with integrated voice and EN54-23 certified visual alarms. Combined with flexible configuration from the Gent by Honeywell fire control panels this loop powered device can give a differentiated combination of audible and visual alarms for alert and general evacuation.Key FeaturesEach loop can support up to 200 voice sounders 100 visual alarm devices VADs and up to 70 combined sounder VADsEN54-23 VADs with adjustable light coverage matching the sounder outputComprehensive and easy to use design and commissioning toolsFour voice phrases and a bell tone available as standardVoice and tone modes can be freely configured within the same sounderActive background monitoring of sounder and VAD circuitsAdjust the sounder volume via the commissioning tool the panel or the HandiLink infrared remote control

GBP 138.43

1

Awardvindende Google Marketing Powerhouse

Brand

Merchant

Price (EUR)