119 results (0,12823 seconds)

Show all filters

Brand

Merchant

Price (EUR)

Show all

Reset filter

Products
From
Shops

Hochiki Magnetic Door Retainer 24V DH-24

Hochiki Magnetic Door Retainer 24V DH-24

Hochiki Magnetic Door Retainer 24V DH-24Model DH-24 is an electromagnetic door retainer which ensures retention of the door by means of a smart metallic keeper plate.It is designed to hold open fire doors and is ideally suited for hospitals schools and other public buildings.In a fire situation the doors can be released automatically via a connection to the fire alarm system or manually by activating the release button.Key Features24 V dcSurface mounted200 Newton holding forceSwivel keeper plateSpring-loaded ejector pinManual release button

GBP 41.78
1

Hochiki 4 Pipe Aspiration Smoke Detector FIRELINK-400

Hochiki 4 Pipe Aspiration Smoke Detector FIRELINK-400

Hochiki FIRELINK-400 4 Pipe Aspiration Smoke DetectorFIRElink-400 is designed to provide very high sensitivity smoke detection using an aspirating technique. A unique sensing technology ensures that the detector operates at optimum sensitivity for the protected environment without the need for complex set-up.The detector is available in three formats the standard detector FIRElink-400 the standard detector plus Command Module FIRElink-400CM and a standalone Command Module FIRElink-CM. The Command Module variants provide a single location display control and interfacing option for systems of up to 127 detectors and allow global programming of all detector functions simultaneously.Key FeaturesVolt-free Fire-1 and Fault relay outputs are provided for remote monitoring by local fire detection or BMS systemsHigh sensitivity provided by laser based forward light scatter for reliable early warningFour sampling pipes up to 200m aggregate in length still airFalse alarms reduced by unique laser sensing technology - able to discriminate against dustRS485 communications built in as standard for networking and remote communications

GBP 2655.61
1

Hochiki WCP1A Marine Conventional Weatherproof Call Point

Hochiki WCP1A Marine Conventional Weatherproof Call Point

Hochiki WCP1A Marine Conventional Weatherproof Call PointTheWCP1A is a Conventional marine-approved weather-proof call-point based upon the industry standard KAC World Series housing and features easy to install push-fit wiring terminals.The unit can support either a Frangible Glass element or a Non Frangible Plastic element and features a weather-proof Housing to IP67 which means it can be mounted in the most severe environmental conditions without water ingress.Key FeaturesApproved to EN54-112001Terminals can accommodate up to a 2.5 mm solid conductorIngress Protection rated to IP67Approved to MED by GLGL Type ApprovalApproved by LPCB

GBP 95.89
1

Hochiki CHQ-DIM2MSCI Marine Dual Input Module with SCI

Hochiki CHQ-DIM2MSCI Marine Dual Input Module with SCI

Hochiki CHQ-DIM2MSCI Marine Dual Input Module with SCIModel CHQ-DIM2MSCI is a Marine Approved Dual Input Module designed to interface to a variety of inputs such as door contacts sprinkler flowdoor switches and plant equipment. Also features an integral short-circuit isolator.A back box is also available CHQ-BACKBOX which when used in conjunction with the CHQ-DIM2MSCI increases the IP rating to IP65.Key FeaturesSingle Loop AddressLoop Powered2 Independent Inputs for Monitoring of Volt Free ContactsEach Input can be Configured to Monitor either Normally Open or Normally Closed contactsSmart-Fix Housing System for flexibilityFeatures an integral SCIApproved to MED by GLGL Type ApprovalApproved by LPCB

GBP 62.12
1

Hochiki Marine Standard Ivory Mounting Base YBN-R6M

Hochiki Marine Standard Ivory Mounting Base YBN-R6M

Hochiki Marine Standard Ivory Mounting Base YBN-R6MModel YBN-R6M is a Conventional Detector Mounting Base approved for marine applications by GL Germanischer Lloyd and is associated with the CDX Range of Marine Approved Detectors.It is supplied with square cable clamps for secure and reliable cable termination but the base does not provide line continuity during detector removal therefore if Call Points are being used then these should be wired onto the zone first. The integrated third terminal provides remote indicator output.Key FeaturesIntegral remote indicator outputLow Profile only 8 mmRugged designElectronics freeQuick connections via square cable clampsAccepts 2.5 mm cablesBayonet slot low insertion force for detectorsApproved to MED by GLGL Type approval

GBP 4.99
1

Hochiki Marine Conventional Combined Heat Detector DCD-AE3M

Hochiki Marine Conventional Combined Heat Detector DCD-AE3M

Hochiki DCD-AE3M Marine Conventional Combined Heat DetectorThe DCD-AE3M is a Marine Approved Rate of Rise Heat Detector with a 60C fixed temperature element using a thermistor and linearising circuit to provide an accurate linear response Heat Detector. The DCD-AE3M is ideal for use where medium ambient temperatures exist such as drying rooms or where Smoke Detectors are unsuitable because of the presence of steam or cooking fumes such as in a kitchengalley.The DCD-AE3M is supported on the majority of conventional systems. A third terminal provides remote indicator output.Key FeaturesElectronic linear heat detectionRemote indicator outputWide voltage range 9.5 30 V dcTwin fire LEDs allow 360 degree viewingApproved by LPCBApproved to MED by GLGL Type approval

GBP 24.29
1

Hochiki Marine Approved Combined Heat Detector DCD-CE3M

Hochiki Marine Approved Combined Heat Detector DCD-CE3M

Hochiki DCD-CE3M Marine Approved Combined Heat DetectorThe DCD-CE3M is a Marine Approved Rate of Rise Heat Detector with a 90C fixed temperature element using a thermistor and linearising circuit to provide an accurate linear response Heat Detector.The DCD-CE3M is ideal for use where medium ambient temperatures exist such as drying rooms or where Smoke Detectors are unsuitable because of the presence of steam or cooking fumes such as in a kitchengalley.The DCD-CE3M is supported on the majority of conventional systems. A third terminal provides remote indicator output.Key FeaturesElectronic linear heat detectionRemote Indicator outputWide voltage range 9.5 30 V dcTwin fire LEDs allow 360 degree viewingApproved by LPCBApproved to MED by GLGL Type approval

GBP 24.29
1

Hochiki Addressable Marine Call Point with SCI HCP-EMSCI

Hochiki Addressable Marine Call Point with SCI HCP-EMSCI

Hochiki HCP-EMSCI Addressable Marine Call Point with SCIThe HCP-EMSCI is a Manual Call Point with integral short-circuit isolator which is fully compatible with Hochikis ESP analogue addressable protocol. The unit incorporates a bi-coloured LED which can be selected as pulsingnon-pulsing1 for communications polling and is continuously lit when the unit is operated in these two states the LED will show red. The LED will show amber when a short-circuit is present but will switch to red if the unit is activated.The unit operates by pressing the EN54 compliant non-frangible plastic element and produces a high-level ESP interrupt. A built-in test function initiated by the control panel ensures the integrity of the device at all times and the device can be tested by insertion of a test key in the underside of the unit. Two terminal blocks are provided for easy connection to the loop wiring.The unit is addressed using the TCH-B200 Hand Held Programmer for quick and reliable addressing. The unit can be flush mounted as supplied. For surface fixing a suitable back box such as the SR MOUNTING BOX is required sold separately. An optional glass element is also available.Key FeaturesApproved to MED by GLSIL Level 2 approved variant availableIdeal for use in oil and gas environmentsFast responseIntegral short-circuit isolatorBi-coloured status LEDNon-frangible element fitted as standard conforms to EN54Addressed with TCH-B200 Hand Held ProgrammerSurface or flush mounting if surface mounting requires SR MOUNTING BOX sold separatelyLPCB Approved to EN54

GBP 44.60
1

Hochiki 2 Pipe Aspiration Smoke Detector with Docking Station FIRELINK-100

Hochiki 2 Pipe Aspiration Smoke Detector with Docking Station FIRELINK-100

Hochiki FIRELINK-100 2 Pipe Aspiration Smoke Detector with Docking StationFIRElink-100 is designed to provide very high sensitivity smoke detection in a small package. A unique sensing technology ensures that the detector operates at optimum sensitivity for the protected environment without the need for complex setup. This means the product will configure itself to provide high sensitivity in a computer room or reduced sensitivity in a smoky area.The detector is designed to fit into a Docking Station which accepts all sampling pipes and cables leaving the detector to be fitted during the final commissioning phase. This ensures that the detector is less likely to be damaged during installation. Volt-free Fire 1 and Fault relay outputs are provided for remote monitoring by local fire detection or BMS systems.Key FeaturesUltra-small low cost aspirating smoke detector for easy and discreet installationHigh sensitivity provided by laser based forward light scatter for reliable early warningTwo sampling pipes up to 100 m aggregate in length still airFalse alarms reduced by unique laser sensing technology - able to discriminate against dustRS485 communications built in as standard for networking and remote communications

GBP 1943.92
1

Hochiki 1 Pipe Aspiration Smoke Detector with Docking Station FIRELINK-25

Hochiki 1 Pipe Aspiration Smoke Detector with Docking Station FIRELINK-25

Hochiki FIRELINK-25 1 Pipe Aspiration Smoke Detector with Docking StationFIRElink-25 is designed to provide very high sensitivity smoke detection in a small package. A unique sensing technology ensures that the detector operates at optimum sensitivity for the protected environment without the need for complex setup. This means the product will configure itself to provide high sensitivity in a computer room or reduced sensitivity in a smoky area.The detector is designed to fit into a Docking Station which accepts all sampling pipes and cables leaving the detector to be fitted during the final commissioning phase. This ensures that the detector is less likely to be damaged during installation. Volt-free Fire 1 and Fault relay outputs are provided for remote monitoring by local fire detection or BMS systems.Key FeaturesUltra-small low cost aspirating smoke detector for easy and discreet installationHigh sensitivity provided by laser based forward light scatter for reliable early warningSingle sampling pipe up to 50 m in length still airFalse alarms reduced by unique laser sensing technology - able to discriminate against dustRS485 communications built in as standard for networking and remote communications

GBP 1425.86
1

Hochiki HCP-WYSCI Yellow Addressable Weatherprooof SCI Call Point

Hochiki HCP-WYSCI Yellow Addressable Weatherprooof SCI Call Point

Hochiki HCP-WYSCI Yellow Addressable Weatherprooof SCI Call PointThe Hochiki HCP-WYSCI is a weatherproof yellow Manual Call Point with integral short-circuit isolator which is fully compatible with Hochikis ESP analogue addressable protocol.The unit incorporates a bi-coloured LED which can be selected as pulsingnon-pulsing 1 for communications polling and is continuously lit when the HCP-WYSCI is operated. In these two states the LED will show red. The LED will show amber when a short-circuit is present but will switch to red if the unit is activated.The unit operates by pressing the EN54 compliant non-frangible plastic element and produces a high level ESP interrupt.A built-in test function initiated by the control panel ensures the integrity of the device at all times and the device can be tested by insertion of a test key in the underside.Two terminal blocks are provided for easy connection to the loop wiring.The unit is addressed using the TCH-B200 Hand Held Programmer for quick and reliable addressing.Key FeaturesFast responseIntegral short-circuit isolatorBi-coloured status LEDNon-frangible element fitted as standardAddressed with TCH-B200 Hand Held ProgrammerSurface mountedIP67 rated

GBP 138.34
1

Hochiki 4 Pipe Aspiration Smoke Detector with Command Module FIRELINK-400CM

Hochiki 4 Pipe Aspiration Smoke Detector with Command Module FIRELINK-400CM

Hochiki FIRELINK-400CM 4 Pipe Aspiration Smoke Detector with Command ModuleFIRElink-400CM is designed to provide very high sensitivity smoke detection using an aspirating technique. A unique sensing technology ensures that the detector operates at optimum sensitivity for the protected environment without the need for complex set-up.With the integrated Command Module this unit also provides a single location display control and interfacing option for systems of up to 127 detectors and allow global programming of all detector functions simultaneously.Key FeaturesHigh sensitivity provided by laser based forward light scatter for reliable early warningFour sampling pipes up to 200 m aggregate in length still airFalse alarms reduced by unique dust discriminationRS485 communications for networking and remote communicationsCommand Module allows control over other FIRElink units on network

GBP 3950.70
1

Hochiki Conventional White Combined 60 Degree Heat Detector DCD-AE3WHT

Hochiki Conventional White Combined 60 Degree Heat Detector DCD-AE3WHT

Hochiki DCD-AE3WHT Conventional White Combined 60 Degree Heat DetectorThe DCD-AE3WHT is a Rate of Rise Heat Detector with a 60 C fixed temperature element using a thermistor and linearising circuit to provide an accurate linear response Heat Detector.It is ideal for use where medium ambient temperatures exist such as drying rooms or where Smoke Detectors are unsuitable because of the presence of steam or cooking fumes such as in a kitchen.It is supported by a range of bases for different applications and these are supported on the majority of conventional systems. A third terminal provides remote indicator output.Key FeaturesElectronic linear heat detectionRemote Indicator outputWide voltage range 9.5 30 V dcTwin fire LEDs allow 360 degree viewingRange of mounting basesApproved by LPCB VdSAlso available in ivory

GBP 18.06
1

Hochiki HCP-WMSCI Addressable Marine Weatherproof Call Point with SCI

Hochiki HCP-WMSCI Addressable Marine Weatherproof Call Point with SCI

Hochiki HCP-WMSCI Addressable Marine Weatherproof Call Point with SCIThe HCP-WMSCI is a weatherproof Manual Call Point with integral short-circuit isolator which is fully compatible with Hochikis ESP analogue addressable protocol. The unit incorporates a bi-coloured LED which can be selected as pulsingnon-pulsing 1 for communications polling and is continuously lit when the HCP-WMSCI is operated in these two states the LED will show red. The LED will show amber when a short-circuit is present but will switch to red if the unit is activated.The unit operates by pressing the EN54 compliant non-frangible plastic element and produces a high level ESP interrupt. A built in test function initiated by the control panel ensures the integrity of the device at all times and the device can be tested by insertion of a test key in the underside of the unit. Two terminal blocks are provided for easy connection to the loop wiring. The unit is addressed using the TCH-B200 Hand Held Programmer for quick and reliable addressing. An optional glass element is also available.Key FeaturesFast responseIntegral short-circuit isolatorBi-coloured status LEDNon-frangible element fitted as standard conforms to EN54Addressed with TCH-B200 Hand Held ProgrammerSurface mountedIP67 ratedLPCB approved to EN54GL and MED Type approval

GBP 162.67
1

Hochiki Addressable Call Point Yellow HCP-EYSCI

Hochiki Addressable Call Point Yellow HCP-EYSCI

Hochiki HCP-EY Addressable Call Point YellowModel HCP-EY is a Manual Call Point which is fully compatible with Hochikis ESP analogue addressable protocol.The HCP-EY incorporates a red LED mounted on the front cover which can be selected as pulsingnon-pulsing for communications polling and is continuously lit when the HCP-EY is operated.The unit is operated by pressing the EN54 compliant non-frangible plastic element and once operated produces a high level ESP interrupt allowing the control panel to respond very quickly. A built in test function initiated by the control panel ensures the integrity of the device at all times and the device can be tested by insertion of a test key in the underside of the unit. Two terminal blocks are provided for easy connection to the loop wiring.The unit is addressed using the TCH-B100 Hand Held Programmer for quick and reliable addressing. The unit can be flush mounted as supplied. For surface fixing a suitable back box such as the SR MOUNTING BOX is required sold separately.Key FeaturesFast responseStatus LEDNon-frangible element fitted as standard conforms to EN54Addressed with TCH-B100 Hand Held ProgrammerSurface or flush mounting if surface mounting requires SR MOUNTING BOX sold separatelyLPCB Approved to EN54

GBP 56.62
1

Hochiki Marine Conventional Infrared Flame Detector DRD-EM

Hochiki Marine Conventional Infrared Flame Detector DRD-EM

Hochiki DRD-EM Marine Conventional Infrared Flame DetectorThe DRD-EM is a marine-approved flame detector designed for internal use to detect large flames. The detector fits the CDX marine-approved standard mounting base YBN-R6M. The detection zone is a 90 cone and the detection range is up to and including 25 m.The flame detector is designed for use where open flaming fires may be expected. It responds to the light emitted from flames during combustion. The detector discriminates between flames and other light sources by responding only to particular optical wavelengths and flame flicker frequencies. This enables the detector to avoid false alarms due to such factors as flickering light sources.The DRD-E detector can detect IR radiated from flames. Flames radiated from a fire have an IR peak emission of 4.3um occurring during the CO2 formation due to the combustion of hydrocarbons from 2 to 15 Hz.Key FeaturesClass 1 performance as defined in BS EN54-102002 range up to 25 mSingle IR technologyRobust and slim designLow current consumptionEasy to installFits the CDX marine-approved standard baseTwin LEDs for 360 viewApproved by LPCB VdSApproved to MED by GLSIL Level 2 approved variantsApplicationsCoal handling plantAircraft hangarsAutomotive industry - spray booths parts manufacturePharmaceuticalEngine roomsWaste handlingPower plantsTransformer stationsPetrochemical

GBP 427.88
1

Hochiki HCP-WSCI Weatherproof Addressable Call Point with SCI IP67

Hochiki HCP-WSCI Weatherproof Addressable Call Point with SCI IP67

Hochiki HCP-WSCI Weatherproof Addressable Call Point with SCI IP67Model HCP-WSCI is a weatherproof Manual Call Point with integral short-circuit isolator which is fully compatible with Hochikis ESP analogue addressable protocol. The unit incorporates a bi-coloured LED which can be selected as pulsingnon-pulsing for communications polling and is continuously lit when the HCP-WSCI is operated in these two states the LED will show red.The LED will show amber when a short-circuit is present but will switch to red if the unit is activated. The unit operates by pressing the EN54 compliant non-frangible plastic element and produces a high level ESP interrupt. A built in test function initiated by the control panel ensures the integrity of the device at all times and the device can be tested by insertion of a test key in the underside of the unit. Two terminal blocks are provided for easy connection to the loop wiring.Key FeaturesFast responseIntegral short-circuit isolatorBi-coloured status LEDNon-frangible element fitted as standard conforms to EN54Addressed with TCH-B100 Hand Held ProgrammerSurface mountedIP67 ratedLPCB approved to EN54Please Note the unit is addressed using the TCH-B100 Hand Held Programmer for quick and reliable addressing. An optional glass element is also available.

GBP 135.91
1

Hochiki Conventional Fixed Temperature Heat 90 Degree Detector DFJ-CE3

Hochiki Conventional Fixed Temperature Heat 90 Degree Detector DFJ-CE3

Hochiki DFJ-CE3 Conventional Fixed Temperature Heat 90 Degree DetectorModel DFJ-CE3 is a 90C Fixed Temperature Heat Detector using a thermistor and linearising circuit to provide an accurate linear response Heat Detector. A third terminal provides integral remote indicator output.The DFJ-CE3 is ideal for use where medium ambient temperatures exist such as drying rooms or where Smoke Detectors are unsuitable because of the presence of steam or cooking fumes such as in a kitchen.The DFJ-CE3 is supported by a wide range of bases for different applications and these are supported on the majority of conventional systems.Key FeaturesElectronic linear heat detectionRemote Indicator outputWide voltage range 9.5 30 V dcTwin fire LEDs allow 360 degree viewingFixed Temperature DetectorFull range of mounting basesApproved by LPCB VdSAlso available in white

GBP 27.82
1

Hochiki Conventional Combined 60 Degrees Heat Detector DCD-AE3

Hochiki Conventional Combined 60 Degrees Heat Detector DCD-AE3

Hochiki DCD-AE3 Conventional Combined 60 Degrees Heat DetectorModel DCD-AE3 is a Rate of Rise Heat Detector with a 60 C fixed temperature element using a thermistor and linearising circuit to provide an accurate linear response Heat Detector.The DCD-AE3 is ideal for use where medium ambient temperatures exist such as drying rooms or where Smoke Detectors are unsuitable because of the presence of steam or cooking fumes such as in a kitchen.The DCD-AE3 is supported by a range of bases for different applications and these are supported on the majority of conventional systems. A third terminal provides remote indicator output.Key FeaturesElectronic linear heat detectionRemote Indicator outputWide voltage range 9.5 30 V dcTwin fire LEDs allow 360 degree viewingRange of mounting basesApproved by LPCB VdSAlso available in white

GBP 18.06
1

Hochiki Marine Dual Sounder Controller with SCI CHQ-DSC2MSCI

Hochiki Marine Dual Sounder Controller with SCI CHQ-DSC2MSCI

Hochiki CHQ-DSC2MSCI Marine Dual Sounder Controller with SCIThe CHQ-DSC2MSCI is a Marine Approved Dual Sounder Controller which has been designed to provide two sounder outputs that can be driven separately with full fault monitoring. The monitored input can be used for local power supply fault monitoring or as a general-purpose input.The unit utilises simple DIL switches for reliable addressing. A back box is also available CHQ-BACKBOX which when used in conjunction with the CHQ-DSC2MSCI increases the IP rating to IP65.Key FeaturesSingle loop addressEach alarm circuit fused at 1 ampTwo independent sounder circuits each fully monitored for open and short circuit faultsAuxiliary monitored inputOutputs can be driven continuously or synchronised pulsed sounder driveSmart-Fix housing system for flexibilityFeatures an integral SCIApproved to MED by GLGL Type approvalApproved by LPCB

GBP 111.84
1

Hochiki SOC-E-ISWHT Conventional Intrinsically Safe Photoelectric Smoke Detector

Hochiki SOC-E-ISWHT Conventional Intrinsically Safe Photoelectric Smoke Detector

Hochiki SOC-E-ISWHT Conventional Intrinsically Safe Photoelectric Smoke Detector WhiteModel SOC-E-IS is a Photoelectric Smoke Detector designed for use in hazardous areas which also incorporates a remote indicator output and a removable chamber for easy maintenance.Each detector incorporates Hochikis unique High-Performance Chamber Technology removing the need to use Ionisation detectors in the majority of applications.The High-Performance Chamber has also enabled the detector threshold level to be increased thereby improving the signal to noise ratio and reducing susceptibility to false alarms.Key FeaturesTwin fire LEDs allow 360O viewingRemovable High Performance chamberSupported by a range of barriersRemote indicator outputATEX Classification to Ex ia IIC T5 Ga -20C Ta 55CSuitable for installation in areas at Category 1 inc all lower categoriesAlso available in whiteApproved by LPCB VdSSIL Level 2 capable.

GBP 81.68
1

Hochiki Marine Photoelectric Smoke Sensor White ALN-ENMWHT

Hochiki Marine Photoelectric Smoke Sensor White ALN-ENMWHT

Hochiki ALN-ENMWHT Marine Photoelectric Smoke Sensor WhiteModel ALN-ENMWHT is a Marine Approved Photoelectric White Smoke Sensor which is fully compatible with Hochikis ESP Analogue Addressable Protocol.The ALN-ENM incorporates Hochikis newest High Performance Chamber Technology removing the need to use Ionisation Smoke Sensors in the majority of applications. This also allows the sensor threshold level to be increased thereby improving the signal to noise ratio and reducing susceptibility to false alarms.The ALN-ENM smoke chamber is easily removed or replaced for cleaning and utilises a unique improved baffle design which allows smoke to enter the chamber whilst keeping out ambient light.Key FeaturesApproved to MED by GLRemovable High Performance chamberTwin LEDs allow 360 viewing green when polling red in fireLocking mechanism sensor to baseVariable sensitivityElectronically addressedPulsingnon-pulsing controlled from panelApproved by LPCB VdS

GBP 42.62
1