17 results (0,15483 seconds)

Show all filters

Brand

Merchant

Price (EUR)

Reset filter

Products
From
Shops

Iscar DCGT 11T302-AS Insert Grade IC20

Iscar DCGT 11T302-AS Insert Grade IC20

DCGT turning inserts are 55 rhombic inserts featuring a 7 positive flank and a very positive rake angle and sharp cutting edge for machining aluminum. Features and Benefits Very positive rake angle and sharp cutting edge for effective cutting Carbide grade for added cutting toughness Uncoated ideal for semi-roughing, semi-finishing and finishing applications Typical Applications Turning Semi-roughing Semi-finishing Finishing Standards Grade : IC20 ISO Range - (M10-M25)(K10-K20)(H05-H15)(S05-S20)(N05-N25)

GBP 21.49
1

Iscar Tag N4C Insert Grade IC83 0

Iscar Tag N4C Insert Grade IC83 0

A tough submicron substrate improved TiAIN PVD coated grade for better chip flow. Designed for machining heat resistant alloys, austenitic stainless steel, hard alloys and carbon steel at medium to high cutting speeds, interrupted cut and unfavourable conditions. Excellent notch wear and built-up edge resistance. Features and Benefits Tough submicron substrate for greater tool hardness Excellent notch wear and built-up edge resistance TiAIN PVD coated for better chip flow, heat and wear resistance Typical Applications Parting Grooving Steel Stainless steel

GBP 22.99
1

Iscar CNMG 120408-TF Insert Grade IC9250

Iscar CNMG 120408-TF Insert Grade IC9250

CNMG Turning Inserts 80 Rhombic Insert Double-sided negative (0) relief angle inserts offering a strong edge for general applications and varying depths of cut dependent on chipbreaker type. Insert Grade IC9250 ISO Range - (P10-P35)(M05-M20) Coating - CVD TiCN+alpha Al2O3+TiN Recommended for general use machining of steel in a wide range of conditions, featuring high toughness and wear resistance. Chipbreaker: TF. Application Medium Chipbreaker: GN . Application Medium Semi Roughing

GBP 24.99
1

Iscar Tag R3C-6D Insert Grade I C808

Iscar Tag R3C-6D Insert Grade I C808

TAG R-C insert offer extra cutting edge strength thanks to their positive rake face with single cavity, negative land and shoulders. Ideal for use on bars, hard materials and tough parting applications. Features and Benefits Enables machining at medium to high feed rates with excellent straightness and surface finish Recommended for parting large diameter parts and for interrupted cuts Offers a free, unobstructed chip flow important in deep grooving and parting applications improved tool and insert lifespan Typical Applications Parting Grooving

GBP 36.99
1

Iscar APKT 100330R Insert Grade IC328

Iscar APKT 100330R Insert Grade IC328

APKT RM milling inserts feature thin PVD coated TiCN layer on a P45-K40 substrate for very high toughness. Ideal for milling, parting and grooving of steel, stainless and alloy steels at low to medium cutting speeds and for unstable machining conditions. Features and Benefits P45-K40 substrate for very high toughness PVD coated TiCN layer for greater heat and wear resistance Suitable for low to medium cutting speeds and unstable machining conditions Reinforced cutting edge for interrupted cut and heavy machining Typical Applications Milling Steel Stainless steel Alloy steels Standards Insert Grade : IC328 ISO Range - P/M/K: (P25-P40)(M30-M40) ISO Range - H/S/N: (S20-S30)

GBP 23.99
1

Iscar H600 WXCU 05T312HP Insert Grade IC830

Iscar H600 WXCU 05T312HP Insert Grade IC830

Wiht theh H600 WXCU Milling Inserts, Iscar has merged three proven ideas into their new Helido Feedmill inserts for high-feed rough milling and cavity work in die & mold shops. The new H600 WXCU inserts feature helical cutting edges for smoother entry, 17 lead angles to reduce lateral forces and SUMO TEC surface treatment for longer edge life. Each trigon shaped insert provides six peripherally ground cutting edges and is seated securely into inclined dovetail pockets to prevent movement. Features and Benefits Coated with SUMO TEC surface treatment for added durability Features a tough grade TiCN+TiN PVD Double sided with 6 cutting edges for fast feed machining Typical Applications Milling Interrupted cutting Heavy machining operations Standards ISO Range - P/M/K: (P20-P40)(M35-M45) ISO Range - H/S/N: (S15-S30) Insert Grade : IC830

GBP 29.99
1

Iscar H600 WXCU 05T312T Insert Grade IC830

Iscar H600 WXCU 05T312T Insert Grade IC830

Wiht theh H600 WXCU Milling Inserts, Iscar has merged three proven ideas into their new Helido Feedmill inserts for high-feed rough milling and cavity work in die & mold shops. The new H600 WXCU inserts feature helical cutting edges for smoother entry, 17 lead angles to reduce lateral forces and SUMO TEC surface treatment for longer edge life. Each trigon shaped insert provides six peripherally ground cutting edges and is seated securely into inclined dovetail pockets to prevent movement. Features and Benefits Coated with SUMO TEC surface treatment for added durability Features a tough grade TiCN+TiN PVD Double sided with 6 cutting edges for fast feed machining Typical Applications Milling Interrupted cutting Heavy machining operations Standards ISO Range - P/M/K: (P20-P40)(M35-M45) ISO Range - H/S/N: (S15-S30) Insert Grade : IC830

GBP 33.99
1

Iscar H600 WXCU Indexable Milling Inserts

Iscar H600 WXCU Indexable Milling Inserts

Wiht theh H600 WXCU Milling Inserts, Iscar has merged three proven ideas into their new Helido Feedmill inserts for high-feed rough milling and cavity work in die & mold shops. The new H600 WXCU inserts feature helical cutting edges for smoother entry, 17 lead angles to reduce lateral forces and SUMO TEC surface treatment for longer edge life. Each trigon shaped insert provides six peripherally ground cutting edges and is seated securely into inclined dovetail pockets to prevent movement. Features and Benefits Coated with SUMO TEC surface treatment for added durability Features a tough grade TiCN+TiN PVD Double sided with 6 cutting edges for fast feed machining Typical Applications Milling Interrupted cutting Heavy machining operations Standards ISO Range - P/M/K: (P20-P40)(M35-M45) ISO Range - H/S/N: (S15-S30) Insert Grade : IC830

GBP 24.99
1

Iscar H600 WXCU 040310T Insert Grade IC830

Iscar H600 WXCU 040310T Insert Grade IC830

Wiht theh H600 WXCU Milling Inserts, Iscar has merged three proven ideas into their new Helido Feedmill inserts for high-feed rough milling and cavity work in die & mold shops. The new H600 WXCU inserts feature helical cutting edges for smoother entry, 17 lead angles to reduce lateral forces and SUMO TEC surface treatment for longer edge life. Each trigon shaped insert provides six peripherally ground cutting edges and is seated securely into inclined dovetail pockets to prevent movement. Features and Benefits Coated with SUMO TEC surface treatment for added durability Features a tough grade TiCN+TiN PVD Double sided with 6 cutting edges for fast feed machining Typical Applications Milling Interrupted cutting Heavy machining operations Standards ISO Range - P/M/K: (P20-P40)(M35-M45) ISO Range - H/S/N: (S15-S30) Insert Grade : IC830

GBP 20.99
1

Iscar H600 WXCU 040310T Insert Grade IC808

Iscar H600 WXCU 040310T Insert Grade IC808

H600 WXCU Milling Inserts Iscar has merged three proven ideas into their new Helido Feedmill inserts for high-feed rough milling and cavity work in die & mold shops. The new H600 WXCU inserts feature helical cutting edges for smoother entry, 17 lead angles to reduce lateral forces and SUMO TEC surface treatment for longer edge life. Each trigon shaped insert provides six peripherally ground cutting edges and is seated securely into inclined dovetail pockets to prevent movement. The new insert is available in extra-durable SUMO TEC grades and a broad choice of rake angles to suit a wide range of materials and applications. Cutters that accommodate them are available in diameters from 50 to 125 mm (2 to 5) Insert Grade IC808 (P15-P30)(M20-M30)(K20-K40)(H10-H20)(S10-S25) Coating Layer TiAlN/AlTiN+TiN PVD coated insert for use on stainless steel and high temperature alloys

GBP 30.99
1

Iscar H600 WXCU Indexable Milling Inserts

Iscar H600 WXCU Indexable Milling Inserts

H600 WXCU Milling Inserts Iscar has merged three proven ideas into their new Helido Feedmill inserts for high-feed rough milling and cavity work in die & mold shops. The new H600 WXCU inserts feature helical cutting edges for smoother entry, 17 lead angles to reduce lateral forces and SUMO TEC surface treatment for longer edge life. Each trigon shaped insert provides six peripherally ground cutting edges and is seated securely into inclined dovetail pockets to prevent movement. The new insert is available in extra-durable SUMO TEC grades and a broad choice of rake angles to suit a wide range of materials and applications. Cutters that accommodate them are available in diameters from 50 to 125 mm (2 to 5) Insert Grade IC808 (P15-P30)(M20-M30)(K20-K40)(H10-H20)(S10-S25) Coating Layer TiAlN/AlTiN+TiN PVD coated insert for use on stainless steel and high temperature alloys

GBP 24.99
1

Iscar Grip 4004Y Insert Grade I C908

Iscar Grip 4004Y Insert Grade I C908

GRIP : Double-ended inserts, for turning & grooving in external, internal and face applications. Grade: IC08 An uncoated fine grain, carbide grade. Used mainly for aluminum and for high temperature alloys at low to medium cutting speed. ISO Range - P/M/K: (M20-M30) ISO Range - H/S/N: (S10-S30)(N10-N20) Grade or Coating Type: UN-COATED Coating Layers: Uncoated Grade: IC354 A thin PVD coated TiCN layer on a P40 substarte. High toughness. For general Applications in parting and grooving steel, alloy and stainless steel atmedium to high cutting speeds. ISO Range - P/M/K: (P20-P40)(M10-M30) Grade or Coating Type: PVD Coating Layers: TiCN Grade: IC908 A hard, fine grain substrate with excellent chipping resistance, combined with a new TiAlN PVD coating. Provides high wear and oxidation resistance. Recommended for a very wide range of materials applications and machining conditions. ISO Range - P/M/K: (P15-P30)(M20-M30)(K20-K40) ISO Range - H/S/N: (H10-H20)(S10-S25) Grade or Coating Type: PVD Coating Layers: TiAlN Grade: IC9025. A tough substrate with a cobalt enriched layer combined with MTCVD TiCN and a thick alpha Al2O3 CVDcoating. Recommended for general use machining ofsteel in a wide range of conditions, featuring high toughness and wear resistance. ISO Range - P/M/K: (P20-P30)(M15-M30) Grade or Coating Type: CVD Coating Layers: TiCN+Al2O3+TiN Grade: IC808 A hard, fine grain substrate with excellent chipping resistance, combined with a new 'SUMO TEC' TiAlN PVD coating. Provides high wear resistance. Recommended for a very wide range of materials. ISO Range - P/M/K: (P15-P30)(M20-M30) ISO Range - H/S/N: (H10-H20)(S10-S25) Grade or Coating Type: PVD Coating Layers: TiAlN/AlTiN+TiN Grade: IC418 CVD multilayer TiCN / TiC / Al2O3 coated grade . Used for grooving and milling of grey and nodular cast iron at medium and high cutting speed. Can beused for interrupted cuts and heavy machining. ISO Range - P/M/K: (K10-K25) Grade or Coating Type: CVD Coating Layers: TiC+Al2O3 Grade: IC508 A tough submicron substrate, TiCN+TiN PVD coated grade. Designed for machining wide range of materials at low to medium cutting speeds, interrupted cut and unfavorable conditions. Excellent notch wear and built-up edge resistance. ISO Range - P/M/K: (P20-P40)(M20-M30)(K20-K30) ISO Range - H/S/N: (H10-H20)(S10-S40)(N10-N30) Grade or Coating Type: PVD Coating Layers: TiCN+TiN Grade: IC8250 A tough substrate with a cobalt enriched layer combined with MTCVD TiCN and a thick alpha Al2O3 CVD coating. Recommended for general use machining of steel in a wide range of conditions, featuring high toughness and wear resistance. ISO Range - P/M/K: (P10-P35)(M05-M20) Grade or Coating Type: CVD Coating Layers: TiCN+Al2O3+TiN

GBP 29.99
1

Iscar Grip 4004Y Insert Grade I C354

Iscar Grip 4004Y Insert Grade I C354

GRIP : Double-ended inserts, for turning & grooving in external, internal and face applications. Grade: IC08 An uncoated fine grain, carbide grade. Used mainly for aluminum and for high temperature alloys at low to medium cutting speed. ISO Range - P/M/K: (M20-M30) ISO Range - H/S/N: (S10-S30)(N10-N20) Grade or Coating Type: UN-COATED Coating Layers: Uncoated Grade: IC354 A thin PVD coated TiCN layer on a P40 substarte. High toughness. For general Applications in parting and grooving steel, alloy and stainless steel atmedium to high cutting speeds. ISO Range - P/M/K: (P20-P40)(M10-M30) Grade or Coating Type: PVD Coating Layers: TiCN Grade: IC908 A hard, fine grain substrate with excellent chipping resistance, combined with a new TiAlN PVD coating. Provides high wear and oxidation resistance. Recommended for a very wide range of materials applications and machining conditions. ISO Range - P/M/K: (P15-P30)(M20-M30)(K20-K40) ISO Range - H/S/N: (H10-H20)(S10-S25) Grade or Coating Type: PVD Coating Layers: TiAlN Grade: IC9025. A tough substrate with a cobalt enriched layer combined with MTCVD TiCN and a thick alpha Al2O3 CVDcoating. Recommended for general use machining ofsteel in a wide range of conditions, featuring high toughness and wear resistance. ISO Range - P/M/K: (P20-P30)(M15-M30) Grade or Coating Type: CVD Coating Layers: TiCN+Al2O3+TiN Grade: IC808 A hard, fine grain substrate with excellent chipping resistance, combined with a new 'SUMO TEC' TiAlN PVD coating. Provides high wear resistance. Recommended for a very wide range of materials. ISO Range - P/M/K: (P15-P30)(M20-M30) ISO Range - H/S/N: (H10-H20)(S10-S25) Grade or Coating Type: PVD Coating Layers: TiAlN/AlTiN+TiN Grade: IC418 CVD multilayer TiCN / TiC / Al2O3 coated grade . Used for grooving and milling of grey and nodular cast iron at medium and high cutting speed. Can beused for interrupted cuts and heavy machining. ISO Range - P/M/K: (K10-K25) Grade or Coating Type: CVD Coating Layers: TiC+Al2O3 Grade: IC508 A tough submicron substrate, TiCN+TiN PVD coated grade. Designed for machining wide range of materials at low to medium cutting speeds, interrupted cut and unfavorable conditions. Excellent notch wear and built-up edge resistance. ISO Range - P/M/K: (P20-P40)(M20-M30)(K20-K30) ISO Range - H/S/N: (H10-H20)(S10-S40)(N10-N30) Grade or Coating Type: PVD Coating Layers: TiCN+TiN Grade: IC8250 A tough substrate with a cobalt enriched layer combined with MTCVD TiCN and a thick alpha Al2O3 CVD coating. Recommended for general use machining of steel in a wide range of conditions, featuring high toughness and wear resistance. ISO Range - P/M/K: (P10-P35)(M05-M20) Grade or Coating Type: CVD Coating Layers: TiCN+Al2O3+TiN

GBP 29.99
1