20 results (0,15667 seconds)

Show all filters

Brand

Merchant

Price (EUR)

Reset filter

Products
From
Shops

Iscar TAG N9.5C INSERT GRADE IC 830

Iscar TAG N9.5C INSERT GRADE IC 830

First choice for the parting of bars, hard materials and tough applications. A positive rake, single cavity with negative land and shoulders, provides extra cutting-edge strength, medium-to-high feeds. IC830 Grade Description: (P20-P50/M20-M40/K15-K40/ S15-S40) PVD TiAlN coated tough grade followed by a special SUMO TEC surface treatment. Suitable for milling stainless steel, high temperature alloys and other alloy steels. Recommended for interrupted cut and heavy operations.

GBP 219.99
1

Iscar H490 ANKX 1706PNTR-CS Insert Grade IC830

Iscar H490 ANKX 1706PNTR-CS Insert Grade IC830

H490 ANKX Milling Inserts form Isacar feature a tough submicron substrate, improved TiAlN/AlTiN+TiN PVD coated grade for better chip flow. Designed for machining heat resistant alloys, austenitic stainless steel, hard alloys and carbon steel at medium to high cutting speeds, interrupted cut and unfavourable conditions. With excellent notch wear and built-up edge resistance it's double sided design and 4 cutting edges make it ideal for applications on a wide range of materials. Grade Description IC808 (P15-P30)(M20-M30)(K20-K40)(H10-H20)(S10-S25) A tough submicron substrate, improved TiAlN/AlTiN+TiN PVD coated grade for better chip flow. Designed for machining heat resistant alloys, austenitic stainless steel, hard alloys and carbon steel at medium to high cutting speeds, interrupted cut and unfavourable conditions. Excellent notch wear and built-up edge resistance. Grade Description IC830 An improved PVD TiAIN coated tough grade with better chip flow. Suitable for milling stainless, high temperature alloys and other alloy steels. Recommended for interrupted cut and heavy operations.

GBP 219.99
1

Iscar H490 ANKX 170608PNTR Insert Grade IC808

Iscar H490 ANKX 170608PNTR Insert Grade IC808

H490 ANKX Milling Inserts form Isacar feature a tough submicron substrate, improved TiAlN/AlTiN+TiN PVD coated grade for better chip flow. Designed for machining heat resistant alloys, austenitic stainless steel, hard alloys and carbon steel at medium to high cutting speeds, interrupted cut and unfavourable conditions. With excellent notch wear and built-up edge resistance it's double sided design and 4 cutting edges make it ideal for applications on a wide range of materials. Grade Description IC808 (P15-P30)(M20-M30)(K20-K40)(H10-H20)(S10-S25) A tough submicron substrate, improved TiAlN/AlTiN+TiN PVD coated grade for better chip flow. Designed for machining heat resistant alloys, austenitic stainless steel, hard alloys and carbon steel at medium to high cutting speeds, interrupted cut and unfavourable conditions. Excellent notch wear and built-up edge resistance. Grade Description IC830 An improved PVD TiAIN coated tough grade with better chip flow. Suitable for milling stainless, high temperature alloys and other alloy steels. Recommended for interrupted cut and heavy operations.

GBP 189.99
1

Iscar LNAR 1506PN-N-P Insert Grade IC07

Iscar LNAR 1506PN-N-P Insert Grade IC07

LNAR Milling Inserts Tangentially clamped inserts with positive polished land and a sharp cutting edge. Recommended for machining high silicon aluminum. 4 R.H. and 4 L.H. cutting edges when used on F90LN.. cutters. Insert Grade: IC07 ISO Range - P/M/K: (M10-M20) ISO Range - H/S/N: (S10-S30)(N05-N20) Grade or Coating Type: UN-COATED Coating Layers: Uncoated An uncoated, fine grain, carbide grade. Used for high temperature alloys at low to medium cutting speed.

GBP 199.99
1

Iscar GIPA-3.00-0.20 Insert Grade IC20

Iscar GIPA-3.00-0.20 Insert Grade IC20

GIPA (W=3-6) : Precision ground double-ended inserts, polished to avoid built-up edge, used for machining aluminum at medium-to-high feeds. IC20 (K10-K20). Uncoated carbide grade for grey cast iron over 220HBN, malleable cast iron, silicon aluminum, copper alloys. fibre reinforced plastics (FRP) phenolic laminates, stone, wood, stainless steel and high-temp resistant alloys. Suitable for Finishing and medium finishing at medium speed, medium feed and interrupted cut conditions. High wear resistance.

GBP 189.99
1

10x Iscar VNMG 160408-TF Insert Grade IC8250

10x Iscar VNMG 160408-TF Insert Grade IC8250

WNMG Turning Inserts 80 Trigon Insert Double-sided inserts with negative (0) relief angle, offering a strong edge for general applications and varying depths of cut dependent on chipbreaker type across most materials. Insert Grade IC9250 ISO Range - (P10-P35)(M05-M20) Coating - CVD TiCN+alpha Al2O3+TiN Recommended for general use machining of steel in a wide range of conditions, featuring high toughness and wear resistance. Chipbreaker : TF . Application Medium Chipbreaker : GN . Application Medium Chipbreaker : TNM . Application Roughing

GBP 209.90
1

Iscar Penta 24N080J000 Insert Grade IC908

Iscar Penta 24N080J000 Insert Grade IC908

ISCAR has developed a new insert designated PENTACUT, with 5 cutting edges, for multifunction applications including grooving, parting, recessing and chamfering. This cost effective insert is designed to perform shallow grooving operations and parting of small solid bars up to 12.5 mm in diameter. Each cutting edge on the pentagonal shaped insert is equipped with a unique J-type positive chipformer that provides excellent chip control in grooving, parting and recessing (light side turning) applications.For all dimensional and technical specifications please refer to our catalogue.

GBP 259.99
1

Iscar Penta 24N200J100 Insert Grade IC908

Iscar Penta 24N200J100 Insert Grade IC908

ISCAR has developed a new insert designated PENTACUT, with 5 cutting edges, for multifunction applications including grooving, parting, recessing and chamfering. This cost effective insert is designed to perform shallow grooving operations and parting of small solid bars up to 12.5 mm in diameter. Each cutting edge on the pentagonal shaped insert is equipped with a unique J-type positive chipformer that provides excellent chip control in grooving, parting and recessing (light side turning) applications.For all dimensional and technical specifications please refer to our catalogue.

GBP 259.99
1

Iscar Penta 24N300J020 Insert Grade IC908

Iscar Penta 24N300J020 Insert Grade IC908

ISCAR has developed a new insert designated PENTACUT, with 5 cutting edges, for multifunction applications including grooving, parting, recessing and chamfering. This cost effective insert is designed to perform shallow grooving operations and parting of small solid bars up to 12.5 mm in diameter. Each cutting edge on the pentagonal shaped insert is equipped with a unique J-type positive chipformer that provides excellent chip control in grooving, parting and recessing (light side turning) applications.For all dimensional and technical specifications please refer to our catalogue.

GBP 249.99
1

Iscar Penta 24N300J040 Insert Grade IC908

Iscar Penta 24N300J040 Insert Grade IC908

ISCAR has developed a new insert designated PENTACUT, with 5 cutting edges, for multifunction applications including grooving, parting, recessing and chamfering. This cost effective insert is designed to perform shallow grooving operations and parting of small solid bars up to 12.5 mm in diameter. Each cutting edge on the pentagonal shaped insert is equipped with a unique J-type positive chipformer that provides excellent chip control in grooving, parting and recessing (light side turning) applications.For all dimensional and technical specifications please refer to our catalogue.

GBP 249.99
1

Iscar HM90 Apct 100302R-PDRINSERT Grade IC808

Iscar HM90 Apct 100302R-PDRINSERT Grade IC808

HM90 APCT 1003 HELI2000 insert with a sharp cutting edge used for semi-finishing and finishing applications. Its hard substrate construction, excellent chipping resistance and "SUMO TEC" TiAlN PVD coating provides high performance and wear resistance. Recommended for machining austenitic stainless steel, titanium and high temperature alloys. Features and Benfits Hard submicron substrate construction Excellent wear and chipping resistance for improved performance "SUMO TEC" TiAlN PVD coating for improved durability Specifications ISO Range - P/M/K: (P15-P30)(M20-M30)(K20-K30) ISO Range - N/S/H: (H20-H30)(S10-S25) Coating type: PVD Coating: TiAlN/AlTiN+TiN Typical Applications Milling Austenitic stainless steel Titanium High temperature alloys

GBP 179.99
1

Iscar H600 WXCU Indexable Milling Inserts

Iscar H600 WXCU Indexable Milling Inserts

Wiht theh H600 WXCU Milling Inserts, Iscar has merged three proven ideas into their new Helido Feedmill inserts for high-feed rough milling and cavity work in die & mold shops. The new H600 WXCU inserts feature helical cutting edges for smoother entry, 17 lead angles to reduce lateral forces and SUMO TEC surface treatment for longer edge life. Each trigon shaped insert provides six peripherally ground cutting edges and is seated securely into inclined dovetail pockets to prevent movement. Features and Benefits Coated with SUMO TEC surface treatment for added durability Features a tough grade TiCN+TiN PVD Double sided with 6 cutting edges for fast feed machining Typical Applications Milling Interrupted cutting Heavy machining operations Standards ISO Range - P/M/K: (P20-P40)(M35-M45) ISO Range - H/S/N: (S15-S30) Insert Grade : IC830

GBP 249.99
1

Iscar ICM 190 Insert Grade IC90 8

Iscar ICM 190 Insert Grade IC90 8

ICM: SUMOCHAM exchangeable DCN drill heads for stainless steel and high temperature alloys (ISO M Materials). The drill head features a T-land on the cutting edge, available in increments of 0.1 mm. Grade : IC908 A hard, fine grain substrate with excellent chipping resistance, combined with a new TiAlN PVD coating. Provides high wear and oxidation resistance. Recommended for a very wide range of materials applications and machining conditions. ISO Range - P/M/K: (P15-P30)(M20-M30)(K20-K40) ISO Range - H/S/N: (H10-H20)(S10-S25) Grade or Coating Type: PVD Coating Layers: TiAlN Grade : IC907 A tough sub-micron substrate, TiAlN PVD coated. Suitable for low-to-medium cutting speeds. Developed for machining of heat resistant alloys, austenitic stainless steel and hard steel. ISO Range - P/M/K: (P10-P30)(M05-M20)(K15-K30) ISO Range - H/S/N: (H05-H15)(S05-S20)(N05-N20) Grade or Coating Type: PVD Coating Layers: TiAlN+TiN

GBP 189.99
1

Iscar T290 ELN D16-05-C16-05 End Mill

Iscar T290 ELN D16-05-C16-05 End Mill

Iscar is introducing a new family of milling tools that use tangentially clamped inserts with two helical cutting edges. TheT290 LNMT....TR inserts are the next evolution of Iscar's most popular HELIMILL? inserts.These new SumoMill? T290 inserts are available in cutting edge lengths of 5 and 10mm. As a result of their tangential orientation in the pocket, the inserts enable tool design with larger core diameters than tools with regular, radially oriented inserts. This provides a much stronger tool construction, which sustains a higher impact load and reduces the risk of fracture to a minimum.AdvantagesTangential clamping mechanism enables the resultant cutting force to be transmitted directly to the cutter body, without applying or adding any undesired stress to the tightening screw. The tangential clamping configuration also offers a higher insert density.Designed with axial and tangential angles that are significantly larger, in comparison to other tools that utilise conventional laydown inserts. This unique design leads to a major reduction in cutting forces, improves tool stability and prolongs life of the cutting edge.High feed rates combined with a large number of of cutting edges deliver more output and increase productivity. The SumoMill T290 convex shaped insert with its unique tangential orientation enabled the development of small diameter cutting tools of even 8mm diameter.The stable condition during the cutting operation prolongs tool life and improves the obtained surface finish.The SumoMill T290 is the only tool available in the market that is capable of performing rampdown milling operations with tangential inserts.For all technical and dimensional specifications please refer to our catalogue.

GBP 309.99
1

Iscar T290 ELN D14-03-C14-05 End Mill

Iscar T290 ELN D14-03-C14-05 End Mill

Iscar is introducing a new family of milling tools that use tangentially clamped inserts with two helical cutting edges. TheT290 LNMT....TR inserts are the next evolution of Iscar's most popular HELIMILL? inserts.These new SumoMill? T290 inserts are available in cutting edge lengths of 5 and 10mm. As a result of their tangential orientation in the pocket, the inserts enable tool design with larger core diameters than tools with regular, radially oriented inserts. This provides a much stronger tool construction, which sustains a higher impact load and reduces the risk of fracture to a minimum.AdvantagesTangential clamping mechanism enables the resultant cutting force to be transmitted directly to the cutter body, without applying or adding any undesired stress to the tightening screw. The tangential clamping configuration also offers a higher insert density.Designed with axial and tangential angles that are significantly larger, in comparison to other tools that utilise conventional laydown inserts. This unique design leads to a major reduction in cutting forces, improves tool stability and prolongs life of the cutting edge.High feed rates combined with a large number of of cutting edges deliver more output and increase productivity. The SumoMill T290 convex shaped insert with its unique tangential orientation enabled the development of small diameter cutting tools of even 8mm diameter.The stable condition during the cutting operation prolongs tool life and improves the obtained surface finish.The SumoMill T290 is the only tool available in the market that is capable of performing rampdown milling operations with tangential inserts.For all technical and dimensional specifications please refer to our catalogue.

GBP 269.99
1

Iscar Grip 3002Y Insert Grade I C908

Iscar Grip 3002Y Insert Grade I C908

GRIP : Double-ended inserts, for turning & grooving in external, internal and face applications. Grade: IC08 An uncoated fine grain, carbide grade. Used mainly for aluminum and for high temperature alloys at low to medium cutting speed. ISO Range - P/M/K: (M20-M30) ISO Range - H/S/N: (S10-S30)(N10-N20) Grade or Coating Type: UN-COATED Coating Layers: Uncoated Grade: IC354 A thin PVD coated TiCN layer on a P40 substarte. High toughness. For general Applications in parting and grooving steel, alloy and stainless steel atmedium to high cutting speeds. ISO Range - P/M/K: (P20-P40)(M10-M30) Grade or Coating Type: PVD Coating Layers: TiCN Grade: IC908 A hard, fine grain substrate with excellent chipping resistance, combined with a new TiAlN PVD coating. Provides high wear and oxidation resistance. Recommended for a very wide range of materials applications and machining conditions. ISO Range - P/M/K: (P15-P30)(M20-M30)(K20-K40) ISO Range - H/S/N: (H10-H20)(S10-S25) Grade or Coating Type: PVD Coating Layers: TiAlN Grade: IC9025. A tough substrate with a cobalt enriched layer combined with MTCVD TiCN and a thick alpha Al2O3 CVDcoating. Recommended for general use machining ofsteel in a wide range of conditions, featuring high toughness and wear resistance. ISO Range - P/M/K: (P20-P30)(M15-M30) Grade or Coating Type: CVD Coating Layers: TiCN+Al2O3+TiN Grade: IC808 A hard, fine grain substrate with excellent chipping resistance, combined with a new 'SUMO TEC' TiAlN PVD coating. Provides high wear resistance. Recommended for a very wide range of materials. ISO Range - P/M/K: (P15-P30)(M20-M30) ISO Range - H/S/N: (H10-H20)(S10-S25) Grade or Coating Type: PVD Coating Layers: TiAlN/AlTiN+TiN Grade: IC418 CVD multilayer TiCN / TiC / Al2O3 coated grade . Used for grooving and milling of grey and nodular cast iron at medium and high cutting speed. Can beused for interrupted cuts and heavy machining. ISO Range - P/M/K: (K10-K25) Grade or Coating Type: CVD Coating Layers: TiC+Al2O3 Grade: IC508 A tough submicron substrate, TiCN+TiN PVD coated grade. Designed for machining wide range of materials at low to medium cutting speeds, interrupted cut and unfavorable conditions. Excellent notch wear and built-up edge resistance. ISO Range - P/M/K: (P20-P40)(M20-M30)(K20-K30) ISO Range - H/S/N: (H10-H20)(S10-S40)(N10-N30) Grade or Coating Type: PVD Coating Layers: TiCN+TiN Grade: IC8250 A tough substrate with a cobalt enriched layer combined with MTCVD TiCN and a thick alpha Al2O3 CVD coating. Recommended for general use machining of steel in a wide range of conditions, featuring high toughness and wear resistance. ISO Range - P/M/K: (P10-P35)(M05-M20) Grade or Coating Type: CVD Coating Layers: TiCN+Al2O3+TiN

GBP 219.99
1

Iscar Grip 5005Y Insert Grade I C354

Iscar Grip 5005Y Insert Grade I C354

GRIP : Double-ended inserts, for turning & grooving in external, internal and face applications. Grade: IC08 An uncoated fine grain, carbide grade. Used mainly for aluminum and for high temperature alloys at low to medium cutting speed. ISO Range - P/M/K: (M20-M30) ISO Range - H/S/N: (S10-S30)(N10-N20) Grade or Coating Type: UN-COATED Coating Layers: Uncoated Grade: IC354 A thin PVD coated TiCN layer on a P40 substarte. High toughness. For general Applications in parting and grooving steel, alloy and stainless steel atmedium to high cutting speeds. ISO Range - P/M/K: (P20-P40)(M10-M30) Grade or Coating Type: PVD Coating Layers: TiCN Grade: IC908 A hard, fine grain substrate with excellent chipping resistance, combined with a new TiAlN PVD coating. Provides high wear and oxidation resistance. Recommended for a very wide range of materials applications and machining conditions. ISO Range - P/M/K: (P15-P30)(M20-M30)(K20-K40) ISO Range - H/S/N: (H10-H20)(S10-S25) Grade or Coating Type: PVD Coating Layers: TiAlN Grade: IC9025. A tough substrate with a cobalt enriched layer combined with MTCVD TiCN and a thick alpha Al2O3 CVDcoating. Recommended for general use machining ofsteel in a wide range of conditions, featuring high toughness and wear resistance. ISO Range - P/M/K: (P20-P30)(M15-M30) Grade or Coating Type: CVD Coating Layers: TiCN+Al2O3+TiN Grade: IC808 A hard, fine grain substrate with excellent chipping resistance, combined with a new 'SUMO TEC' TiAlN PVD coating. Provides high wear resistance. Recommended for a very wide range of materials. ISO Range - P/M/K: (P15-P30)(M20-M30) ISO Range - H/S/N: (H10-H20)(S10-S25) Grade or Coating Type: PVD Coating Layers: TiAlN/AlTiN+TiN Grade: IC418 CVD multilayer TiCN / TiC / Al2O3 coated grade . Used for grooving and milling of grey and nodular cast iron at medium and high cutting speed. Can beused for interrupted cuts and heavy machining. ISO Range - P/M/K: (K10-K25) Grade or Coating Type: CVD Coating Layers: TiC+Al2O3 Grade: IC508 A tough submicron substrate, TiCN+TiN PVD coated grade. Designed for machining wide range of materials at low to medium cutting speeds, interrupted cut and unfavorable conditions. Excellent notch wear and built-up edge resistance. ISO Range - P/M/K: (P20-P40)(M20-M30)(K20-K30) ISO Range - H/S/N: (H10-H20)(S10-S40)(N10-N30) Grade or Coating Type: PVD Coating Layers: TiCN+TiN Grade: IC8250 A tough substrate with a cobalt enriched layer combined with MTCVD TiCN and a thick alpha Al2O3 CVD coating. Recommended for general use machining of steel in a wide range of conditions, featuring high toughness and wear resistance. ISO Range - P/M/K: (P10-P35)(M05-M20) Grade or Coating Type: CVD Coating Layers: TiCN+Al2O3+TiN

GBP 269.99
1

Iscar Grip 4002Y Insert Grade I C908

Iscar Grip 4002Y Insert Grade I C908

GRIP : Double-ended inserts, for turning & grooving in external, internal and face applications. Grade: IC08 An uncoated fine grain, carbide grade. Used mainly for aluminum and for high temperature alloys at low to medium cutting speed. ISO Range - P/M/K: (M20-M30) ISO Range - H/S/N: (S10-S30)(N10-N20) Grade or Coating Type: UN-COATED Coating Layers: Uncoated Grade: IC354 A thin PVD coated TiCN layer on a P40 substarte. High toughness. For general Applications in parting and grooving steel, alloy and stainless steel atmedium to high cutting speeds. ISO Range - P/M/K: (P20-P40)(M10-M30) Grade or Coating Type: PVD Coating Layers: TiCN Grade: IC908 A hard, fine grain substrate with excellent chipping resistance, combined with a new TiAlN PVD coating. Provides high wear and oxidation resistance. Recommended for a very wide range of materials applications and machining conditions. ISO Range - P/M/K: (P15-P30)(M20-M30)(K20-K40) ISO Range - H/S/N: (H10-H20)(S10-S25) Grade or Coating Type: PVD Coating Layers: TiAlN Grade: IC9025. A tough substrate with a cobalt enriched layer combined with MTCVD TiCN and a thick alpha Al2O3 CVDcoating. Recommended for general use machining ofsteel in a wide range of conditions, featuring high toughness and wear resistance. ISO Range - P/M/K: (P20-P30)(M15-M30) Grade or Coating Type: CVD Coating Layers: TiCN+Al2O3+TiN Grade: IC808 A hard, fine grain substrate with excellent chipping resistance, combined with a new 'SUMO TEC' TiAlN PVD coating. Provides high wear resistance. Recommended for a very wide range of materials. ISO Range - P/M/K: (P15-P30)(M20-M30) ISO Range - H/S/N: (H10-H20)(S10-S25) Grade or Coating Type: PVD Coating Layers: TiAlN/AlTiN+TiN Grade: IC418 CVD multilayer TiCN / TiC / Al2O3 coated grade . Used for grooving and milling of grey and nodular cast iron at medium and high cutting speed. Can beused for interrupted cuts and heavy machining. ISO Range - P/M/K: (K10-K25) Grade or Coating Type: CVD Coating Layers: TiC+Al2O3 Grade: IC508 A tough submicron substrate, TiCN+TiN PVD coated grade. Designed for machining wide range of materials at low to medium cutting speeds, interrupted cut and unfavorable conditions. Excellent notch wear and built-up edge resistance. ISO Range - P/M/K: (P20-P40)(M20-M30)(K20-K30) ISO Range - H/S/N: (H10-H20)(S10-S40)(N10-N30) Grade or Coating Type: PVD Coating Layers: TiCN+TiN Grade: IC8250 A tough substrate with a cobalt enriched layer combined with MTCVD TiCN and a thick alpha Al2O3 CVD coating. Recommended for general use machining of steel in a wide range of conditions, featuring high toughness and wear resistance. ISO Range - P/M/K: (P10-P35)(M05-M20) Grade or Coating Type: CVD Coating Layers: TiCN+Al2O3+TiN

GBP 379.99
1